Search NASA⌕ Search

SEARCH · Search NASA

Results for “rational”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Extrapolating Contaminant Effects from Individuals to Populations: A Case Study on Nanoparticle Toxicity to Daphnia Fed Environmentally Relevant Food Levels

Ecological risk assessment (ERA) is charged with assessing the likelihood a chemical will have adverse environmental or ecological effects. When assessing the risk of a potential contaminant to biological organisms, ecologists are most concerned with the sustainability of populations of organisms, rather than protecting every individual. However, ERA most commonly relies on data on the effect of a potential contaminant on individuals because these experiments are more feasible than costly population-level exposures. In this work, we address the challenge of extrapolating these individual-level results to predict population-level effects. Previous per-capita population growth rate estimates calculated from individual-level exposures of Daphnia pulicaria to silver nanoparticles (AgNPs) at different food rations predict a critical daily food requirement for daphnid populations exposed to 200 μg/L AgNPs to avoid extinction. To test this, we exposed daphnid populations to the same AgNP concentration at three different food inputs, with the lowest ration close to the extinction threshold predicted from data on individuals. The two populations with the higher food inputs persisted, and the population with the lowest food input went extinct after 50 days but did persist through two generations. Further, we demonstrate that we can extrapolate between these levels of biological organization by parameterizing an individual-level biomass model with data on individuals’ response to AgNPs and using these parameters to predict the outcome for control and AgNP-exposed populations. Key to successful extrapolation is careful modeling of temporal changes in resource density, driven by both the experimental protocols and feedback from the consumer. The implication for ecotoxicology is that estimates of extinction thresholds based on studies of individuals may be reliable predictors of population outcomes, but only with careful treatment of resource dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Consequences and benefits of utilizing continuous vibro-impact representations in constrained pipeline conveying fluid systems

Here, the effectiveness of continuous vibro-impact forcing representations for the cantilevered pipe that conveys fluid is explored and analyzed. The previously accepted forcing model utilizing a smoothened trilinear spring is estimated using three continuous forcing representations, namely, polynomial, rational polynomial, and hyperbolic tangent. The accuracy of the estimated forcing functions is investigated and analyzed by calculating the root mean square error, and bifurcation diagrams are generated and compared to the nominal system. Additionally, the dynamic response of the system is further characterized using Poincare maps, power spectra, and basins of attraction. Once all continuous forcing representations are analyzed and compared to the nominal system, the computational cost of each method is examined, and further limitations of the hyperbolic tangent method are discovered. It is proved that the hyperbolic tangent forcing representation most accurately captures the dynamic response of the pipeline, and the least accurate representation is the rational polynomial representation. Additionally, considerable computational cost is saved when employing the hyperbolic tangent representation compared to the discontinuous representation.

42 ENGINEERING↗
DOE OSTI2021

Expert Text Analysis in the Inclusion of History and Philosophy of Science in Higher Education

The history and philosophy of science (HPS) plays a special role in education. An elective HPS course onthe philosophy of scientific experimentation for young scientists and graduate students of natural scienceis presented. The course bears a pragmatic character, and its main aims include the development of criticalthinking (CT), familiarization with philosophical problems in the relevant areas of knowledge, and thecultivation of a taste for reflective, critical analysis, both individual and group-based, which contributes todeeper understanding of the features of scientific practice in the context of modern complex groupcooperation. Students are offered a classical HPS program that included debates on the relationship betweenempiricism and rationalism, the role of Kant’s transcendental philosophy, modern topics associated withthe practical success of rationalism in the emergence of modern natural science, and the theory-ladennessof experimentation. Particular attention during the course is paid to the problems of megascience, theinclusion of which is justified by the specifics of the students’ engagement with science, technology,engineering, and mathematics (STEM). Emphasis is placed on the structure and typology of the collectivesubject in the modern educational process as well as in experimental practice. Lessons on the methodologyof expert text analysis (META), which are aimed at the development of critical thinking skills and thecreation of an interdisciplinary discussion space, are included in the course and relied on the example ofthe history and philosophy of high energy physics to motivate professional reflection. META classesincluded in the course prepare graduate students for teamwork in big science, proto-megascience, andmegascience. The course offers practical recommendations that could be applied to students’ own researchand could be useful for practitioners.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

From electricity to fuels: Descriptors for C 1 selectivity in electrochemical CO 2 reduction

Electrochemical reduction of carbon dioxide (CO 2 RR) over transition metals follows a complex reaction network. Here, we combine observations from experimental literature with a theoretical analysis of energetics to rationalize that not all intermediates in the reduction of CO 2 are formed through direct protonation steps. We derive a selectivity map for two-electron products (carbon monoxide (CO) and formate) on pure metal surfaces using only the CO and OH binding energies as descriptors. For the pure metals that are selective towards CO formation, the variation of the CO binding energy is sufficient to further subdivide the map into domains that predominantly form H 2 , CO, and more reduced products. Our analysis rationalizes experimentally observed product distributions in CO 2 RR across pure metal systems. Overall, we highlight the need for additional material screening descriptors for CO 2 R and the importance of considering competition from the elementary steps of the hydrogen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The sum is greater than the parts: exploiting microbial communities to achieve complex functions

We report multi-species microbial communities are ubiquitous in nature. The widespread prevalence of these communities is due to highly elaborated interactions among their members thereby accomplishing metabolic functions that are unattainable by individual members alone. Harnessing these communal capabilities is an emerging field in biotechnology. The rational intervention of microbial communities for the purpose of improved function has been facilitated in part by developments in multi-omics approaches, synthetic biology, and computational methods. Recent studies have demonstrated the benefits of rational interventions to human and animal health as well as agricultural productivity. Emergent technologies, such as in situ modification of complex microbial community and community metabolic modeling, represent an avenue to engineer sustainable microbial communities. In this opinion, we review relevant computational and experimental approaches to study and engineer microbial communities and discuss their potential for biotechnological applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Scaling dynamics in low-salt-rejection reverse osmosis for high-salinity produced water desalination: Mechanistic modeling and membrane autopsy

Membrane scaling remains a critical barrier to the reliable operation of desalination systems, particularly for hypersaline produced water (PW) treatment. This study fills the knowledge gap of autopsy-based model validation for PW desalination by elucidating scaling mechanisms in a Low-Salt-Rejection Reverse Osmosis (LSRRO) system through the integration of pilot-scale experimentation and complementary modeling approaches. A semi-empirical modeling framework was developed and applied to a multistage pilot LSRRO system equipped with nanofiltration and RO membranes treating high-salinity PW from the Permian Basin. Water quality analysis showed that total dissolved solids decreased from ~130,000 mg/L to ~1900 mg/L in the permeate, then further reduced to ~300 mg/L by a second-pass RO. Two different thermodynamic modeling approaches were evaluated: the first extends the LSRRO framework by incorporating system complexity and scaling phenomena, whereas the second method explicitly captures concentration polarization in localized supersaturation. Both methods illustrate the tendency for carbonate and sulfate scaling throughout the stages. Membrane autopsies revealed a silica-dominated deposit matrix, localized CaSO 4 at Stage 2, and minor barite/celestite despite their prominence in model predictions. Quantum-chemical calculations indicated silica scaling can be rationalized by favorable adsorption of H 4 SiO 4 on Fe-oxide surfaces (ΔG ≈ −44 kJ/mol), providing a kinetic pathway for interfacial inorganic polymerization even when bulk equilibrium predictions are conservative. Overall, the thermodynamic scaling modeling and membrane autopsy revealed heterogeneous, localized deposits with limited impact on LSRRO performance, while quantum analysis rationalized the thermodynamically unfavorable precipitation formation under bulk equilibrium, reconciling model–autopsy discrepancies. These insights support targeted pretreatment and silica-specific antiscalants to extend membrane lifetime and increase recovery, providing a transferable framework for hypersaline water desalination systems. The combined experimental–computational approach provides new mechanistic insight into scaling in hypersaline membrane systems and establishes a transferable framework for predicting and mitigating scaling in next-generation desalination technologies.

Low-salt-rejection reverse osmosis↗
DOE OSTI2022

Building interface bonding and shield for stable Li-rich Mn-based oxide cathode

Implementation of Li-rich Mn-based oxide cathode with high-energy-density has been restrained by capacity/voltage degradation that results from irreversible lattice oxygen loss and structure rearrangements. To resolve these challenges, in this work, Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 encapsulated by amorphous Co x B (CB-LRM) is rationally designed via autocatalytic plating for highly reversible cationic/anionic hybrid cathode material. Band coherency is ingeniously evoked by interface-reconstruction between bulk structure and amorphous coating layer, which lower the energy of O $2p$ states. Furthermore, this is associated with strengthened orbital hybridization of O $2p$-Mn $3d$ and increased formation energy of oxygen vacancy, which mitigates the lattice oxygen loss considerably. Additionally, interface shielding effects that protect electrode against electrolyte corrosion and the reduction of surface oxygen are also present with fully coverage of amorphous Co x B coating layer. As a result, the as-designed CBLRM cathode exhibits excellent cycle stability after 100 loops with only 0.154% per cycle capacity fade and improved voltage degradation. Given this, this work provides a potential avenue for rational design of lattice oxygen-based electrode materials with high-energy-density.

25 ENERGY STORAGE↗
DOE OSTI2021

On Anomaly Detection for Transactive Energy Systems with Competitive Market

Two anomaly-detection criteria are proposed for transactive energy systems with competitive markets. Participants of transactive energy systems seek an optimal power allocation through hybrid economic-control methods to facilitate the integration of various types of distributed energy resources to power distribution systems. In transactive energy systems, every participant is assumed to be a rational entity, and consumers have diminishing marginal utility and suppliers have increasing marginal cost. With the first proposed anomaly-detection criterion, the monotonicity of marginal cost and marginal utility are examined. The impact of line flow constraints is also taken into consideration. Then, the second anomaly-detection criterion is proposed for TESs with marginal cost and marginal utility which change faster than a certain rate. The second criterion is more accurate than the first one for TES with marginal cost and marginal utility which change faster than a certain rate, but it requires the knowledge of that rate. Neither criteria requires more data than those necessary to find the optimal power allocation and the market-clear price in a transactive energy system. Therefore, the proposed criteria do not disclose any more data than necessary. As the monotonicity of marginal cost and marginal utility in a TES with competitive markets results in convex objective functions in an optimization problem and strongly convex ones when marginal cost and marginal utility changes faster than a certain rate, the two detection criteria are also applicable to anomaly detection of general convex optimization problems. Simulations are carried out to show the efficacy of the proposed criteria to detect anomalies caused by cyberattacks.

Wang, Peng↗
DOE OSTI2022

Microstructure-sensitive modeling of high temperature creep in grade-91 alloy

Predicting the effects of microstructure on high-temperature creep responses of steel components is critical to minimize the risks of failure and maximize economic viability in the energy sector. In this research, a recently developed advanced mechanistic constitutive model is employed to study the effect of microstructure on the creep responses and to rationalize experimentally reported variability in the performances of grade-91 alloy. Hundreds of experimental creep tests from the literature are used to assess the predictability of the model. The model proposed is shown to accurately predict the steady-state creep rates and also the less commonly considered, yet important, primary-to-secondary transients for a wide range of creep conditions. Further, the model is capable of extrapolating the creep response of grade 91 alloy even outside of the calibration regime. Using this model, the roles of initial microstructure described in terms of grain size, dislocation density, and precipitate content, on the creep responses are investigated. The effect of initial microstructure on the steady-state creep rates and creep-strain is found to vary with stress and temperature. Grain size plays a significant role in the low-stress creep, where the diffusional creep is dominant. On the other hand, the effects of dislocation densities and precipitate content are significant in the dislocation-plasticity-dominated high-stress and temperature regimes. Furthermore, by comparing model predictions against a large experimental creep database, it is found that variability in the creep responses can be rationalized on the basis of differences in the initial microstructure. Overall, this work provides a robust pathway for microstructure-aware engineering design, verification, and validation of metallic components for energy applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Connecting cation site location to alkane dehydrogenation activity in Ni/BEA catalysts

Ni-modified beta zeolite (Ni/BEA) catalysts activate carbon-hydrogen bonds in light alkanes, as demonstrated through isobutane reaction testing. Controlled synthesis of Ni/BEA allows for efficient introduction of ion-exchanged Ni sites at varying Ni loadings (0.43% - 1.8%). These catalysts exhibit site time yields (STY) for H2 production that increase with increasing Ni loading. A detailed analysis of secondary reactions and carbon deposition based on the relative molar flowrates of product C and H indicates that the observed increase in H2 STY with increasing Ni loading is likely attributed to both increasing alkane activation activity and increasing formation of hydrogen-deficient aromatic products retained within the catalyst pores. In situ diffuse-reflectance UV-visible-NIR absorbance and X-ray absorption spectroscopies indicate isolated, 4-coordinate Ni(2+) species for all loadings. Quantum mechanics/molecular mechanics modeling identifies two distinct Ni(2+) sites consistent with the structural characterization, but with differing relative stabilities due to their coordination environment. Computed reaction energetics for isobutane dehydrogenation demonstrate that the more stable Ni(2+) species at a six-membered 4Si-2Al ring, Ni-6MR, is less active for isobutane dehydrogenation than the less stable Ni(2+) at the five-membered 3Si-2Al ring, Ni-5MR. The differing local structure of the isolated cationic Ni sites in Ni/BEA offers a possible rationalization for the increased H2 STY observed at greater Ni loadings.

catalysts↗
DOE OSTI2024

Support size regulated ruthenium-sulfoacid-nitrogen sites intensify cellulose hydrogenolysis to 1,2-propylene glycol

Rational design of metal-acid-base multifunctional catalysts for upgrading cellulose to 1,2-propylene glycol (1,2-PG) is of great significance for building a sustainable world. However, it is time-consuming and tedious to regulate metal-acid-base sites to balance major reactions to render a high 1,2-PG yield. We herein report support size simultaneously regulated ruthenium-sulfoacid-nitrogen (Ru–SO 3 H–N) sites for cellulose hydrogenolysis to high yield 1,2-PG. Originated from the depolymerization and reassembly of zinc-1,3,5-benzenetricarboxylic acid (ZnBTC) fiber with zeolitic imidazolate framework (ZIF-8) in water, 2-methylimidazole infiltrated nanorod (ZnBTC(mIM)) with a varied aspect ratio was fabricated by varying the feed ratio of ZIF-8/ZnBTC. Upon being pyrolyzed, sulfonated and impregnated with Ru ions, the supported sites were tailored in terms of Ru single-atom/nanocluster ratio, SO 3 H acidity and N basicity. Further, the elaborately fabricated catalyst delivers 32.3% yield of 1,2-PG, corresponding to a high productivity of 67.71 mol h -1 g Ru -1 and a large turnover number of 34193, two and three orders of magnitude higher than those by using other Ru-containing catalytic systems for cellulose hydrogenolysis. The excellent performance can be attributed to optimized electronic and molecular structure of Ru–SO 3 H–N sites that can improve rate-determining cellulose hydrolysis/fructose hydrogenolysis, pivotal glucose isomerization with others to proceed at a matched rate. This study opens a new avenue to facilely tailor the metal-acid-base sites by rational design of size controlled supporting matrix.

1,2-Propylene glycol↗
DOE OSTI2020

Electrochemical Oxidation of Organic Molecules at Lower Overpotential: Accessing Broader Functional Group Compatibility with Electron-Proton Transfer Mediators

CONSPECTUS: Electrochemical organic oxidation reactions are highly appealing because protons are often effective terminal electron acceptors, thereby avoiding undesirable stoichiometric oxidants. These reactions are often plagued by high overpotentials, however, that greatly limit their utility. Single-electron transfer (SET) from organic molecules generates high energy radical-cations. Formation of such intermediates often requires electrode potentials far above the thermodynamic potentials of the reaction and frequently causes decomposition and/or side reactions of ancillary functional groups. In this Account, we show how electrocatalytic electron-proton transfer mediators (EPTMs) address this challenge. EPTMs bypass the formation of radical-cation intermediates by supporting mechanisms that operate at electrode potentials much lower (=1 V) than analogous direct electrolysis reactions. The stable aminoxyl radical TEMPO (2,2,6,6-tetramethylpiperidine N-oxyl) is an effective mediator for electrochemical alcohol oxidation, and we have employed such processes for applications ranging from pharmaceutical synthesis to biomass conversion. A complementary electrochemical alcohol oxidation method employs a cooperative Cu/TEMPO mediator system that operates at 0.5 V lower electrode potential than the TEMPO-only mediated process. This difference, which arises from a different catalytic mechanism, rationalizes the broad functional group tolerance of Cu/TEMPO-based aerobic alcohol oxidation catalysts. Aminoxyl mediators address long-standing challenges in the "Shono oxidation", an important method for a-C–H oxidation of tertiary amides and carbamates. Shono oxidations are initiated by a high-potential SET step that limits their utility. Aminoxyl-mediated Shono-type oxidations have been developed that operate at much lower potentials and tolerate diverse functional groups. Analogous reactivity underlies a-C–H cyanation of secondary cyclic amines, a new method that enables efficient diversification of piperidine-based pharmaceutical building blocks and preparation of non-natural amino acids. Electrochemical oxidations of benzylic C–H bonds are commonly initiated by SET to generate radical cations, but such methods are again plagued by large overpotentials. Mediated electrolysis methods that promote hydrogen-atom-transfer (HAT) from benzylic C–H bonds to Fe-oxo species and phthalimide N-oxyl (PINO) support C–H oxygenation, iodination, and oxidative-coupling reactions. A complementary method merges photochemistry with electrochemistry to achieve amidation of C(sp3)–H bonds. This unique process operates at much lower overpotentials compatible with diverse functional groups. These results have broad implications for organic electrochemistry, highlighting the importance of "overpotential" considerations and the prospects for expanding synthetic utility by using mediators to bypass high-energy outer-sphere electron-transfer mechanisms. Principles demonstrated here for oxidation are equally relevant to electrochemical reductions.

Wang, Fei↗
DOE OSTI2021

Net Electronic Charge as an Effective Electronic Descriptor for Oxygen Release and Transport Properties of SrFeO 3 -based Oxygen Sorbents

Perovskite oxides, as oxygen sorbents, exhibit excellent potential in thermochemical redox applications such as chemical looping air separation (CLAS), resulting from their excellent redox properties and high tunability. The structural and compositional flexibility of perovskites, while making these mixed oxides highly versatile, also poses challenges for their design and optimization. Moreover, the elevated operating temperature and dynamic oxygen partial pressure swings during redox processes add additional complications for oxygen sorbent design. From a fundamental standpoint, finding simple yet effective descriptors for the effect of cation substitutions on oxygen sorbents’ redox and oxygen transport properties are of significant importance for rational optimization of perovskite-based oxygen sorbents. In the present study, a series of A/B-site-doped SrFeO 3-δ perovskites are investigated using density functional theory (DFT) + U simulations. From these simulations, an effective electronic structural descriptor, the net electronic charge (Δe) of oxygen anions, is extracted based on its excellent correlations with vacancy formation energy, experimentally derived oxygen capacity, and oxygen vacancy migration barrier. Overall, these findings provide an effective tool to correlate the oxygen sorbents’ redox performances with a simple yet physically meaningful descriptor for rational design and optimization of perovskites in the context of CLAS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tuning the Radius Ratio to Enhance Thermoelectric Properties in the Zintl Compounds AM 2 Sb 2 (A = Ba, Sr; M = Zn, Cd)

Five novel Zintl phase solid solutions in the Ba 1–x Sr x Zn 2–y Cd y Sb 2 (0 ≤ x ≤ 0.13(1); 0 ≤ y ≤ 0.32(2)) system were successfully synthesized by the molten Pb metal-flux method, and the powder X-ray diffraction and single-crystal X-ray diffraction analyses proved that all five title compounds adopted the BaCu 2 S 2 -type phase having the orthorhombic Pnma space group (Z = 4, Pearson code oP20) with five crystallographically independent atomic sites. The previously studied BaCu 2 S 2 -type antimonides demonstrated a limited tolerance for doping in contrast to the CaAl 2 Si 2 -type antimonides. To understand the relatively narrower phase width and limited dopability of the title BaCu 2 S 2 -type phase than the CaAl 2 Si 2 -type phase in the overall Ba 1–x Sr x Zn 2–y Cd y Sb 2 system, the radius ratio of cations and anionic elements r + /r – for two structure types were thoroughly investigated. For the first time, the r + /r – ratio was identified as a critical factor for the phase selectivity: (1) r + /r – > 1 favored the BaCu 2 S 2 -type phase, and (2) r + /r – < 1 favored the CaAl 2 Si 2 -type phase. Further, we also revealed the structural transformation mechanism from the more widely observed CaAl 2 Si 2 -type phase to the title BaCu 2 S 2 -type phase as the relatively larger cationic elements were introduced to the system. A series of DFT calculations using the three hypothetical models indicated that a resonance peak near EF in the density of states curves was descended from the relatively flat band structure at several special symmetry points rationalizing the enhanced Seebeck coefficients of Ba 0.94(1) Sr 0.06 Zn 1.86(3) Cd 0.14 Sb 2 and Ba 0.96(1) Sr 0.04 Zn 1.68(2) Cd 0.32 Sb 2 . Electron localization function analysis rationalized the correlation between the polarity change of anionic Zn/Cd–Sb bonds and the charge carrier mobility on the anionic frameworks. Temperature-dependent thermoelectric properties were studied for the four title compounds, and the results proved that the Sr and Cd doping in the title Ba 1–x Sr x Zn 2–y Cd y Sb 2 system successfully enhanced the ZT values through the increased Seebeck coefficients and the reduced total thermal conductivities.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Understanding the Control of Speciation of Molybdenum Oxides in MFI-Type Zeolites

Metal oxide-impregnated zeolites are employed in a wide variety of catalytic reactions, including methane dehydroaromatization (MDA). The most studied catalysts for MDA are Mo carbides supported on H-ZSM-5, formed through the carburization of Mo-oxide-loaded H-ZSM-5. A complete structural understanding of these materials has not yet been achieved, limiting the potential for rational catalyst design for improved performance. We hereby pursue experimental and theoretical investigations of these catalyst precursors to uncover rational design principles. We employ temperature-programmed oxidation and extended X-ray absorption fine-structure experiments, density functional theory calculations, and QuantEXAFS analysis to unveil Mo-oxide speciation in H-ZSM-5. Finally, we demonstrate that Mo-oxides exist within these systems as a combination of various motifs, and the relative abundance of these species is controlled through tailored preparation methods. The synergies exploited in this work may be leveraged in other related catalysts. The conclusions drawn are applicable to other relevant applications of zeolite-supported metal oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Probing the Electronic Structure of a Thorium Nitride Complex by Solid-State 15N NMR Spectroscopy

The solid-state 15N NMR powder spectra of the thorium nitride complex, [K(18-crown-6)(THF)2][(R2N)3Th(m-15N)(Th(NR2)3] ([K][1-15N], R = SiMe3), and the thorium amide complex, [Th(NR2)3(15NH2)] (2-15N) were recorded. The spectrum for [K][1-15N] represents the first reported solid-state 15N NMR data for an actinide nitride complex. The experimentally measured tensor spans are 847 ppm for [K][1-15N] and 237 ppm for 2-15N. Both shielding tensors exhibit a near-zero asymmetry parameter, which for [K][1-15N] is consistent with a local rotational symmetry of its 15N-labelled nitride ligand. For 2-15N, the lack of asymmetry can be rationalized by a quasi-free Th-NH2 bond rotation in the solid-state. DFT calculations overestimate the tensor span somewhat for [K][1-15N], but provide isotropic shifts in good agreement with both the solid-state and solution values for both complexes. Natural localized molecular orbital (NLMO) analyses of the nuclear shielding reveal that the larger tensor span in [K][1-15N] vs. 2-15N is primarily a consequence of more pronounced covalency of the N-Th bonds, and large spin-orbit coupling due to significant Th 5f orbital contribution to those bonds, impacting the principal components of the shielding tensor perpendicular to the Th-N-Th axis. Overall, our analysis confirms the involvement of the 5f orbitals in Th-N multiple bonds, and further demonstrates the value of solid-state NMR spectroscopy for interrogating actinide-ligand bonding.

actinides, covalent bonding, Nuclear Magnetic Reso↗
DOE OSTI2020

Iron(III)–Oxo Cluster Chemistry with Dimethylarsinate Ligands: Structures, Magnetic Properties, and Computational Studies

A program has been initiated to develop Fe III /oxo cluster chemistry with the ‘pseudo-carboxylate’ ligand dimethylarsinate (Me 2 AsO 2 - ) for comparison with the well investigated Fe III /oxo/carboxylate cluster area. The synthesis and characterization of three polynuclear Fe III complexes are reported, [Fe 12 O 4 (O 2 C t Bu) 8 (O 2 AsMe 2 ) 17 (H 2 O) 3 ]Cl 3 (1), Na 2 [Fe 12 Na 2 O 4 (O 2 AsMe 2 ) 20 (NO 3 ) 6 (Me 2 AsO 2 H) 2 (H 2 O) 4 ](NO 3 ) 6 (2) and [Fe 3 (O 2 AsMe 2 ) 6 (Me 2 AsO 2 H) 2 (hqn) 2 ](NO 3 ) (3), where hqn is 8-hydroxyquinoline. The Fe 12 core of 1 is a type never previously encountered in Fe III carboxylate chemistry, consisting of two Fe 6 units each of which comprises two {Fe 3 (μ 3 -O 2- )} units bridged by three Me 2 AsO 2 - groups and linked into an Fe 12 loop structure by two anti-anti η 1 :η 1 :μ Me 2 AsO 2 - groups, a bridging mode extremely rare with carboxylates. 2 also consists of two Fe 6 units, differing in their ligation from those in 1, and this time linked together into a linear structure by a central {Na 2 (NO 3 ) 2 } bridging unit. 3 is a linear Fe 3 complex with no monoatomic bridges between Fe III ions, a very rare situation in Fe III chemistry with any ligands, and unprecedented in Fe carboxylate chemistry. The distinct differences observed in arsinate vs carboxylate ligation modes are rationalized largely based on the greater basicity of the former vs the latter. Variable-temperature dc and ac magnetic susceptibility data reveal all Fe 2 pairwise interactions to be antiferromagnetic. For 1 and 2, the different J ij couplings were estimated by use of a magnetostructural correlation for high nuclearity Fe III -oxo clusters and by density functional theory calculations using broken symmetry methods, allowing identification of their relative spin vector alignments and thus rationalization of their S = 0 ground states. The J ij values were then used as input values to give excellent fits of the experimental χM T vs T data. For 3, the fits of the experimental χM T vs T data to the Van Vleck equation or with PHI gave a very weak J 12 = -0.8(1) cm -1 (H = –2JŠ i ·Š j convention) between adjacent Fe III ions, and an S = 5/2 ground state. Furthermore, these initial Fe III arsinate complexes also provide structural parameters that help validate literature assignments of arsinate binding modes to iron oxide/hydroxide minerals as part of environmental concerns of using arsenic-containing herbicides in agriculture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electron-Withdrawing meso -Substituents Turn On Magneto-Optical Activity in Porphyrins

A series of square planar metalloporphyrins (M(TPP), TPP is 5,10,15,20-tetraphenylporphyrin and M(TPFPP), TPFPP is 5,10,15,20-tetrapentafluorophenylporphyrin; M is Zn 2+ , Ni 2+ , Pd 2+ , or Pt 2+ ) with distinct meso-substituents were prepared, and their magneto-optical activity (MOA) was characterized by magnetic circular dichroism (MCD) and magneto-optical rotary dispersion spectroscopy (MORD; also known as Faraday rotation spectroscopy). MOA is crucial in the development of next-generation magneto-optical devices and quantum computing. Here, the data show that the presence of meso-pentafluorophenyl substituents results in significant increase in MOA in comparison to the homologous phenyl group. Differences in the MOA of these metalloporphyrins are rationalized using the Gouterman four-orbital model and pave the way for rational design of improved and tailorable magneto-optical materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗