Search NASA⌕ Search

SEARCH · Search NASA

Results for “reaction processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Microcanonical rates from ring-polymer molecular dynamics: Direct-shooting, stationary-phase, and maximum-entropy approaches

We address the calculation of microcanonical reaction rates for processes involving significant nuclear quantum effects using ring-polymer molecular dynamics (RPMD), both with and without electronically non-adiabatic transitions. After illustrating the shortcomings of the naive free-particle direct-shooting method, in which the temperature of the internal ring-polymer modes is set to the translational energy scale, we investigate alternative strategies based on the expression for the microcanonical rate in terms of the inverse Laplace transform of the thermal reaction rate. It is shown that simple application of the stationary-phase approximation (SPA) dramatically improves the performance of the microcanonical rates using RPMD, particularly in the low-energy region where tunneling dominates. Using the SPA as a Bayesian prior, numerically exact RPMD microcanonical rates are then obtained using maximum entropy inversion of the thermal reaction rates for both electronically adiabatic and non-adiabatic model systems. Finally, the direct-shooting method is revisited using the SPA-determined temperature for the internal ring-polymer modes, leading to a simple, direct-simulation method with improved accuracy in the tunneling regime. This work suggests a general strategy for the extraction of microcanonical dynamical quantities from RPMD (or other approximate thermal) simulations.

Tao, Xuecheng↗
DOE OSTI2020

Opportunities for detailed fission studies using light charged particle reactions

Since its discovery in 1939, the nuclear fission process has provided much insight into the behavior of nuclei under many different conditions. As part of the nuclear chain reaction, the fission process has had a profound impact on modern society and it has consequently attracted much attention to the field of nuclear physics. In this talk, I will argue that the time is ripe for a resumption of studies of the fission process induced by light charged particle reactions. Although fission can be induced in heavy nuclei by several means, in some cases these methods suffer from the complication that fission can occur at several points during the decay chain thus mixing up contributions from different excitation energies. Using instead light charged particle reactions to excite the nuclei in question, the precise excitation energy from which fission takes place, can be determined. In fact, a number of such studies were carried out previously, and a first set of results on fission barrier heights, mass, energy and angular distributions were obtained. Applying detection techniques developed over the last decades will allow researchers to obtain detailed, high-quality data from which to probe and refine our present understanding of the process. Based on these observations, I suggest that substantial advances in the study of this process can be achieved by using simple light charged particle reactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Nuclear data resources and initiatives for nuclear astrophysics

Research into the cosmic synthesis of the elements, the evolution and explosion of stars, the nature of the early Universe, and other important topics in nuclear astrophysics are at the forefront of nuclear science. These studies are motivating laboratory measurements and theoretical calculations that, after significant investments, are pushing the boundaries of what is possible. The latest nuclear results, however, must be specially prepared before they can be used to advance our knowledge of the cosmos. This processing requires a set of resources unique to nuclear astrophysics, and an impressive collection of nuclear reaction and nuclear structure datasets, processing codes, thermonuclear reaction rate libraries, and simulation codes and services have been developed for the field. There are, however, some serious challenges to these efforts that will only worsen in the future, making it important to develop strategies and act now to ensure a sustainable future for this work. After detailing the specific data types needed for nuclear astrophysics and the available data resources, the major challenges in this work and their implications are discussed. A set of initiatives are proposed to meet those challenges along with suggested implementations and possible ways that they may advance our understanding of the Universe and strengthen the field of nuclear astrophysics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Time dependent chlorination of CeO 2 , La 2 O 3 and Nd 2 O 3 by ZrCl 4 dissolved in eutectic LiCl–KCl

Partial chlorination of CeO 2 , La 2 O 3 , and Nd 2 O 3 was achieved using ZrCl 4 dissolved in molten LiCl-KCl at 450°C over a period of 4-5 hr. ZrCl 4 was pre-volatilized into an argon stream to maintain a constant vapor pressure for equilibration with the salt. This approach was effective at maintaining the ZrCl 4 concentration at the solubility limit of 1.3 mol% in the molten salt throughout the duration of two of the chlorination experiments and within about 60% of the solubility limit in the third experiment. Based on the analysis of salt samples, fractional conversion after four hours of reaction for CeO 2 , and five hours for La 2 O 3 , and Nd 2 O 3 were calculated to be 0.97, 0.28, and 0.65 respectively. Assuming a shrinking core diffusion-limited model, the diffusivity of ZrCl 4 through the hypothesized ZrO 2 layer was calculated for the chlorination of CeO 2 , La 2 O 3 , and Nd 2 O 3 were 1.76 x 10 -10 cm 2 /sec, 7.85 x 10 -12 cm 2 /sec, and 7.42 x 10 -12 cm 2 /sec, respectively. Given the extremely low values calculated for diffusivity, it was concluded that the process is chemical reaction rate limited and that a complete reaction of each rare earth oxide could be achieved. Furthermore, a chemically controlled shrinking core model was shown to also fit the experimental data closely.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Atomic-scale insights into topotactic transformations in an extra-large-pore zeolite using time-resolved 3D electron diffraction

Understanding the atomic-scale structural dynamics of phase transformations is crucial for developing materials and tailoring their properties. However, many materials are obtained as polycrystalline powders with large unit cells and/or complex structures, making it challenging to investigate detailed structural changes using conventional X-ray diffraction techniques. Here we employ time-resolved three-dimensional electron diffraction to reveal the topotactic reactions and transformations that convert the extra-large-pore silicate zeolite ECNU-45 into ECNU-46. ECNU-45 features three-dimensional interconnecting 24 × 10 × 10-ring channels, while ECNU-46 consists of one-dimensional 24-ring channels connected to 10-ring pockets. ECNU-45 and ECNU-46 are both examples of pure silicate zeolites with pore openings larger than 22-ring. Our findings indicate changes at six distinct tetrahedral silicon sites, involving atom displacement, addition and removal of framework atoms through bond breakage and formation. This work presents the synthesis of zeolites and also provides atomic-level insights into the dynamic processes of topotactic reactions. Our results have implications for advancing materials engineering and understanding complex solid-state reactions at an atomic scale.

Inorganic chemistry↗
DOE OSTI2024

Towards Exascale Astrophysics of Mergers and Supernovae (TEAMS)

The major goals of the TEAMS project are (i) to improve the modeling of many of the suggested astrophysical sites of the r‐process, as well as some potential p‐process sites, (ii) to use our models to support and guide the experimental efforts at FRIB and similar facilities, and (iii) to use our tools to cement our understanding of the roles that massive stars play in galactic chemical evolution. As part of the TEAMS project, Mezzacappa (UTK, Reddy (UW), Surman (ND), and Steiner (UTK) are (i) generating equations of state and neutrino opacities for simulations of core‐collapse supernovae and neutron star mergers which are more faithful to current understanding of the nucleon‐nucleon interaction, (ii) integrating those new equations of state and neutrino opacities into new simulation codes being developed, (iii) performing detailed nuclear reaction network post‐processing to determine abundances from simulations and (iv) quantifying the impact of nuclear physics uncertainties on r‐process abundances.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Properties and reaction mechanism of phosphoric acid activated metakaolin geopolymer at varied curing temperatures

Reaction mechanism of phosphoric activated metakaolin is studied by techniques of calorimetry, ICP-OES, FTIR and NMR taking curing temperature and [H{sub 3}PO{sub 4}] as variables. A two-stage curing method including pre-curing at 40 °C for 24 h and second curing at 60/80 °C for another 24 h effectively mitigates thermal-cracking of the obtained silico-aluminate phosphate (SAP) samples, whose maximum compressive strength reaches 120 MPa. Dealumination of metakaolin in H{sub 3}PO{sub 4} solution produces low aluminate-containing silicate units and subsequently condensation of silicate tetrahedrons occurs. Higher temperature and H{sub 3}PO{sub 4} concentration accelerate the two processes. After complete reaction, A{sub VI} structure from metakaolin disappears and the dissolved Al preferably forms Al{sub VI}-O-P units. During reaction, metastable P-O-P intermediate appears in SAPs with higher P/Al ratio and finally transforms into Al-O-P structure upon PO{sub 4}{sup 3−} consumption. Phosphate units as P(OAl){sub x}(H{sub 2}O){sub 4-x} are connected with Si or Al structure units. Major structural units of the SAPs include Al-O-P, Si-O-P, Si-O-Si, and Si-O-Al.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Measuring thermal profiles in high explosives using neural networks

We present a new method for calculating the temperature profile of high explosive (HE) material using a Convolutional Neural Network (CNN). To train/test the CNN, we have developed a hybrid experiment/simulation method for collecting acoustic and temperature data. We experimentally heat cylindrical containers of HE material until detonation/deflagration, where we continuously measure the acoustic bursts through the HE using multiple acoustic transducers lined around the exterior container circumference. However, measuring the temperature profile in the HE in an experiment would require inserting a large number of thermal probes, which would disrupt the heating process. Thus, we use two thermal probes, one at the HE center and one at the wall. We then use numerical simulation of the heating process to calculate the temperature distribution and correct the simulated temperatures based on the experimental center and wall temperatures. We calculate temperature errors on the order of 15 °C, which is ∼12% of the range of temperatures in the experiment. We also investigate how the algorithm’s accuracy is affected by the number of acoustic receivers used to collect each measurement and the resolution of the temperature prediction. This work provides a means of assessing the safety status of HE material, which cannot be achieved using existing temperature measurement methods. In addition, it has implications for a range of other applications where internal temperature profile measurements would provide critical information. These applications include detecting chemical reactions, observing thermodynamic processes such as combustion, monitoring metal or plastic casting, determining the energy density in thermal storage capsules, and identifying abnormal battery operations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Measuring thermal profiles in high explosives using neural networks

We present a new method for calculating the temperature profile of high explosive (HE) material using a Convolutional Neural Network (CNN). To train/test the CNN, we have developed a hybrid experiment/simulation method for collecting acoustic and temperature data. We experimentally heat cylindrical containers of HE material until detonation/deflagration, where we continuously measure the acoustic bursts through the HE using multiple acoustic transducers lined around the exterior container circumference. However, measuring the temperature profile in the HE in an experiment would require inserting a large number of thermal probes, which would disrupt the heating process. Thus, we use two thermal probes, one at the HE center and one at the wall. We then use numerical simulation of the heating process to calculate the temperature distribution and correct the simulated temperatures based on the experimental center and wall temperatures. We calculate temperature errors on the order of 15 °C, which is ~12% of the range of temperatures in the experiment. We also investigate how the algorithm’s accuracy is affected by the number of acoustic receivers used to collect each measurement and the resolution of the temperature prediction. This work provides a means of assessing the safety status of HE material, which cannot be achieved using existing temperature measurement methods. In addition, it has implications for a range of other applications where internal temperature profile measurements would provide critical information. These applications include detecting chemical reactions, observing thermodynamic processes such as combustion, monitoring metal or plastic casting, determining the energy density in thermal storage capsules, and identifying abnormal battery operations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Surface Processes Control the Fate of Reactive Oxidants Generated by Electrochemical Activation of Hydrogen Peroxide on Stainless-Steel Electrodes

Low-cost stainless-steel electrodes can activate hydrogen peroxide (H 2 O 2 ) by converting it into a hydroxyl radical ( • OH) and other reactive oxidants. At an applied potential of +0.020 V, the stainless-steel electrode produced • OH with a yield that was over an order of magnitude higher than that reported for other systems that employ iron oxides as catalysts under circumneutral pH conditions. Decreasing the applied potential at pH 8 and 9 enhanced the rate of H 2 O 2 loss by shifting the process to a reaction mechanism that resulted in the formation of an Fe(IV) species. Significant metal leaching was only observed under acidic pH conditions (i.e., at pH <6), with the release of dissolved Fe and Cr occurring as the thickness of the passivation layer decreased. Despite the relatively high yield of • OH production under circumneutral pH conditions, most of the oxidants were scavenged by the electrode surface when contaminant concentrations comparable to those expected in drinking water sources were tested. The stainless-steel electrode efficiently removed trace organic contaminants from an authentic surface water sample without contaminating the water with Fe and Cr. With further development, stainless-steel electrodes could provide a cost-effective alternative to other H 2 O 2 activation processes, such as those by ultraviolet light.

42 ENGINEERING↗
DOE OSTI2026

Modeling glass degradation and release of radionuclides from vitrified waste for performance assessment simulations

The release of radionuclides initially encapsulated in a slowly degrading solid waste form and contained in an eventually corroding canister defines the source term for numerical simulations for the assessment of a geologic repository for high-level radioactive waste. While the details of waste degradation, canister corrosion, and dissolution and mobilization of the radionuclides in pore water include complex chemical reaction and transport processes that are coupled to the thermal, hydrological, microbiological, and mechanical conditions in the repository, the source-term model suitable for use in a numerical performance assessment model should be a defensible abstraction of these mechanisms. We developed a radiological source-term model and implemented it into a non-isothermal flow and transport simulator. While the proposed source-term model is applicable to various waste forms, canister systems, and disposal concepts, we specifically considered radionuclide releases from vitrified high-level waste placed in a cylindrical canister disposed in a deep vertical borehole repository. In this model, waste degradation is a function of temperature, and it can be adjusted to evaluate the influence of and propagate uncertainties in pH, passivation reactions, and chemical conditions as well as geometrical factors. The time-dependent, congruent release of safety-relevant radionuclides present in the decaying inventory is then calculated. Finally, the radionuclides are mobilized by diffusive and advective transport according to the thermo-hydraulic conditions prevailing in the near field of the repository, from where they migrate through the geosphere to the accessible environment. We examine the influence of the source-term model’s parameters on performance assessment calculations through sensitivity and uncertainty propagation analyses, identifying influential factors and confirming the upper bound of their impact. These considerations align with the overarching goal of repository design, which is to demonstrate that engineered and natural barriers can collectively delay radionuclide migration for timescales far exceeding human planning, thereby providing multiple, redundant barriers against environmental contamination.

iTOUGH2↗
DOE OSTI2021

Fabrication and field emission properties of vertical, tapered GaN nanowires etched via phosphoric acid

The controlled fabrication of vertical, tapered, and high-aspect ratio GaN nanowires via a two-step top-down process consisting of an inductively coupled plasma reactive ion etch followed by a hot, 85% H 3 PO 4 crystallographic wet etch is explored. The vertical nanowires are oriented in the $[0001]$ direction and are bound by sidewalls comprising of $\{33\bar{6}2\}$ semipolar planes which are at a 12° angle from the [0001] axis. High temperature H3PO4 etching between 60 °C and 95 °C result in smooth semipolar faceting with no visible micro-faceting, whereas a 50 °C etch reveals a micro-faceted etch evolution. High-angle annular dark-field scanning transmission electron microscopy imaging confirms nanowire tip dimensions down to 8–12 nanometers. The activation energy associated with the etch process is 0.90 ± 0.09 eV, which is consistent with a reaction-rate limited dissolution process. The exposure of the $\{33\bar{6}2\}$ type planes is consistent with etching barrier index calculations. The field emission properties of the nanowires were investigated via a nanoprobe in a scanning electron microscope as well as by a vacuum field emission electron microscope. Finally, the measurements show a gap size dependent turn-on voltage, with a maximum current of 33 nA and turn-on field of 1.92 V nm -1 for a 50 nm gap, and uniform emission across the array.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Reactive extrusion of frontally polymerizing continuous carbon fiber reinforced polymer composites

The manufacturing of carbon fiber-reinforced polymer (CFRP) composites demands rapid and energy-efficient strategies. Frontal polymerization (FP) enables the manufacturing of CFRP using dicyclopentadiene (DCPD) thermoset polymer which meets these requirements. In this work, we introduce reactive extrusion of CFRP (RE-CFRP), where two rollers provide localized heat and pressure to sustain the curing reaction and the consolidation of a continuous carbon fiber tow pre-impregnated with DCPD. We study the effect of the extrusion speed, temperature, and compaction force on the properties of the produced CFRP. Mechanical testing confirms that the resulting fiber volume fraction and the elastic modulus are similar to bulk cured tows. A homogenized thermo-chemical model is developed to study the effect of the process parameters on the polymerization reaction. The process produces hollow woven composite tubes directly via extrusion and in situ curing. Overall, this process offers advantages in curing, tooling, speed, and energy.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A new approach for simulating inhomogeneous chemical kinetics

Abstract In this paper, inhomogeneous chemical kinetics are simulated by describing the concentrations of interacting chemical species by a linear expansion of basis functions in such a manner that the coupled reaction and diffusion processes are propagated through time efficiently by tailor-made numerical methods. The approach is illustrated through modelling $$\alpha$$ α - and $$\gamma$$ γ -radiolysis in thin layers of water and at their solid interfaces from the start of the chemical phase until equilibrium was established. The method’s efficiency is such that hundreds of such systems can be modelled in a few hours using a single core of a typical laptop, allowing the investigation of the effects of the underlying parameter space. Illustrative calculations showing the effects of changing dose-rate and water-layer thickness are presented. Other simulations are presented which show the approach’s capability to solve problems with spherical symmetry (an approximation to an isolated radiolytic spur), where the hollowing out of an initial Gaussian distribution is observed, in line with previous calculations. These illustrative simulations show the generality and the computational efficiency of this approach to solving reaction-diffusion problems. Furthermore, these example simulations illustrate the method’s suitability for simulating solid-fluid interfaces, which have received a lot of experimental attention in contrast to the lack of computational studies.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Predictive Chemical Kinetic Modeling: Where We Succeed, Where We Struggle, and What Comes Next

Chemical kinetic modeling plays a foundational role in fields ranging from energy to environmental science, pharmaceuticals, and advanced materials. The past two decades have seen remarkable progress, particularly in modeling gas-phase reactions for thermochemical processes, leading to impactful industrial applications such as steam cracking and air quality management. However, new challenges are emerging. The successful development of systematic methodologies for the description of gas-phase kinetics opens the possibility to apply the same approach to the study of more challenging systems. Here, we review recent advances, including ab initio transition state theory-based master equation estimation of elementary rates, automated mechanism generation, machine-learning-assisted kinetics, and uncertainty quantification, and discuss the advances needed to apply the same methodological approach in areas such as heterogeneous catalysis, electrochemistry, liquid-phase and solid-state reactivity, and multiscale model integration. We advocate for the development of targeted tools, especially methods that go beyond empirical tuning toward first-principles-based predictions. We highlight the need for accessible software and AIaugmented workflows to democratize modeling for industry and academia alike. In this perspective, we call attention to not only what has worked but also what remains unsolved, advocating to avoid overemphasizing successes in scientific works at the expense of realism. The next decade should focus on predictive capability, physical accuracy, and community infrastructure (e.g., databases and services) to enable innovation across diverse fields. We argue that kinetic modeling, properly equipped, can accelerate discovery far beyond its traditional domains.

ab initio calculations↗
DOE OSTI2022

A Phase-Field Study on Internal to External Oxidation Transition in High-Temperature Structural Alloys

Structural alloys applied at high temperatures rely on an external dense layer of oxide scale for protection. As some reactive alloy components are selectively oxidized internally, understanding how these dispersed metal oxide particles reach the surface to form a protective scale—the so-called internal to external oxidation transition—is crucial for designing these alloys. While the literature is replete with experimental studies on oxidation of alloys, there is a lack of computational studies in this realm due to the complex nature of coupled reaction and diffusion processes in multicomponent multi-phase alloy systems. In this work, we apply a recently developed phase-field model to simulate the oxidation processes under different compositions and nucleation scenarios to gain insights into how a continuous oxide scale can be established. The results show that while alloy composition is critical for internal to external oxidation transition, the oxide nuclei size, shape and distribution also have significant impact on the transition kinetics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Towards fast-charging high-energy lithium-ion batteries: From nano- to micro-structuring perspectives

Electric vehicles (EVs) have been playing an indispensable role in reducing greenhouse gas emissions for our modern society. However, current EVs are difficult to meet people’s diverse travel needs, especially in long endurance and fast-charging capacities. At the heart of this issue is the physicochemical limit of current lithium-ion batteries (LIBs), which are the core parts for powering the vehicles. Hence, LIBs with simultaneous high energy and power are critically required to further promote the development of EVs. Here, in this review, we first summarize the key electrochemical processes in electrochemical reactions which lead to the corresponding overpotentials in or between multiple battery components. Furthermore, numerical simulations are employed to quantitatively analyze the effects of versatile electrode parameters on electrochemical properties in high-energy NMC811//graphite systems. On the basis of the in-depth understandings from simulation, recent experimental efforts on designing electroactive materials and electrode architectures across multiple length scales are discussed. Among them, nano-structuring can promote local mass transport and stabilize the interfaces at the particle level, while micro-structuring can establish efficient pathways for charge carriers at the electrode level. Finally, we conclude that a tight feedback loop among structure engineering, characterization and simulation should be followed to speed up the understanding of the deficiencies existing in current electrode designs as well as point out the possible electrode optimization routes for next-generation fast-charging LIBs.

25 ENERGY STORAGE↗
DOE OSTI2021

Mathematical modeling of novel porous transport layer architectures for proton exchange membrane electrolysis cells

Thin foil based porous transport layers (PTLs) that contain highly structured pore arrays have shown promise as anode PTLs in proton exchange membrane electrolysis cells. These novel PTLs, fabricated with advanced manufacturing techniques, produce thin, tunable, multifunctional layers with reduced flow and interfacial resistances and high thermal and electric conductivities. To further optimize their design, it is important to understand their fundamental impact on the transport of protons, electrons, and liquid/vapor mixtures in the electrode. In this work, we develop a two-dimensional multiphysics model to simulate the coupled electrochemistry and multiphase transport in an electrolysis cell operated with the novel PTL architecture. The results show that larger pores improve access of water to the anode catalyst layer, which is beneficial for both the oxygen evolution reaction and membrane hydration. Larger pore sizes also improve oxygen gas transport from the catalyst layer, because generated oxygen gas is forced to travel in-plane through the anode catalyst layer until it reaches a pore opening that is connected to a channel. The discussed results confirm that the proposed thin foil based PTLs are fundamentally different from conventional PTLs, such as felts or layered meshes. The model developed in this work also provides generalizable insight into fundamental PEMEC phenomena, such as the competition between liquid and gas phase transport, membrane hydration and water management, and nonuniform electrochemical reactions, which are processes relevant to all PEMEC designs.

25 ENERGY STORAGE↗