Search NASA⌕ Search

SEARCH · Search NASA

Results for “rectifiers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

ICRF near-field effects sensitivity to magnetic tilt-angle

This paper complements the study reported in G. Urbanczyk et al 2025 Nucl. Fusion 65 046018 by investigating how near-field effects from Ion Cyclotron Range of Frequency (ICRF) antennas depend on the magnetic geometry, particularly focusing on the sensitivity of rectified sheath potentials and associated impurity production to variations in magnetic field tilt-angle. Simulations were conducted using Petra-M, employing a flat model of the ASDEX Upgrade (AUG) three-strap antenna, and COMSOL, utilizing a curved model of the WEST antenna. Results demonstrate indications of sensitivity of the rectified sheath potentials and impurity sputtering to the alignment of Faraday screen bars with the magnetic field lines, emphasizing the necessity for careful consideration of geometric alignment in antenna design for fusion devices. This trend is consistent with experimental data measured with various diagnostics.

Urbanczyk, Guillaume [Universite de Lorraine, Nanc↗

ACOUSTIC RECTIFICATION IN DISPERSIVE MEDIA

It is shown that the shapes of acoustic radiation-induced static strain and displacement pulses (rectified acoustic pulses) are defined locally by the energy density of the generating waveform. Dispersive properties are introduced analytically by assuming that the rectified pulses are functionally dependent on a phase factor that includes both dispersive and nonlinear terms. The dispersion causes an evolutionary change in the shape of the energy density profile that leads to the generation of solitons experimentally observed in fused silica.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrical transport properties and magnetoresistance of polycrystalline Fe{sub 3}O{sub 4}/p-Si heterostructures

Polycrystalline Fe{sub 3}O{sub 4} films were deposited on the p-Si wafers using reactive sputtering to form the polycrystalline Fe{sub 3}O{sub 4}/p-Si heterostructures. A rectifying behavior was observed in the polycrystalline Fe{sub 3}O{sub 4}/p-Si heterostructures due to the formation of p-n junction between Fe{sub 3}O{sub 4} and p-Si. The metal-insulator transition was observed, and the transition temperature decreases from 250 K at 100 mA to 110 K at 1 mA in the reverse range, but it keeps at 100 K in the forward range. The current-dependent magnetoresistance (MR) crossovers from negative to positive with different manners for the forward and reverse currents. The characteristic MR is thought to be caused by the rectifying effect and band structure of the Fe{sub 3}O{sub 4} near the interface of the heterostructures.

36 MATERIALS SCIENCE↗

Electrical characteristics of Au and Ag Schottky contacts on Nb-1.0 wt %-doped SrTiO{sub 3}

The (Au,Ag)/Nb-1.0 wt %-doped SrTiO{sub 3} (NSTO), i.e., Au/NSTO, Ag/NSTO, Ag/Au/NSTO, and Au/Ag/NSTO junctions were fabricated by magnetic controlled sputtering and annealing process. Backward diodelike behaviors were observed in all as-prepared samples, and forward rectifying characteristics were gradually developed in the four junctions after annealed in oxygen at 400 deg. C, 550 deg. C, 700 deg. C, and 850 deg. C, respectively. Compared with the Ag/NSTO junctions, the Au/NSTO junctions showed higher temperature evolving procedure of forward rectifying behavior. Moreover, ideal Schottky behaviors appeared in the samples annealed at 850 deg. C, which were attributed to the formation of interface states. X-ray photoelectron spectroscopy and secondary ion mass spectrometry analysis showed that the interface states mainly originated from the migration of metal into NSTO matrix and the changes in chemical composition at the metal/NSTO interfaces. The results of current-voltage measurements reveal that annealing at higher temperature alters the interface barrier and thereby ameliorates the stability of leakage current remarkably.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bipolar resistive switching properties of Ti-CuO/(hexafluoro-hexa-peri-hexabenzocoronene)-Cu hybrid interface device: Influence of electronic nature of organic layer

This study reports the change in the structural and junction properties of Ti-CuO-Cu structure on incorporation of a 2-dimensional (2D) organic layer comprising of n-type hexafluoro-hexa-peri-hexabenzocoronene (6F-HBC). A bipolar resistive switching is observed in the device having interface between sputter deposited copper oxide (CuO) and vacuum sublimated 6F-HBC hybrid interface. The CuO/6F-HBC hybrid interface exhibits rectifying I-V characteristics in complete contrast to the ohmic and rectifying characteristics of junctions based on individual 6F-HBC and CuO layers. Large change in resistive switching property from unipolar resistive switching in CuO/HBC to bipolar resistive switching in CuO/6F-HBC interface was observed. At the CuO/6F-HBC interface, C1s peak corresponding to fluorinated carbon is shifted by 0.68 eV towards higher binding energy (BE) side and O1s peak due to non-lattice oxygen is shifted by 0.6 eV towards lower BE, confirming the interaction of O{sup 2-} ion in CuO with fluorinated carbon atoms in 6F-HBC at the hybrid interface. Correlation between conductive atomic force microscopy images and atomic force microscopy topography images, I-V characteristics in conducting, non-conducting, and pristine regions along with x-ray photoelectron spectroscopy results establishes the important role of hybrid interface to determining the resistive switching properties. This study demonstrates that the resistive switching and interface properties of a hybrid device based on inorganic and organic 2D materials can be modified by changing the electronic properties of organic layer by attaching suitable functional groups.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High performance vertical tunneling diodes using graphene/hexagonal boron nitride/graphene hetero-structure

A tunneling rectifier prepared from vertically stacked two-dimensional (2D) materials composed of chemically doped graphene electrodes and hexagonal boron nitride (h-BN) tunneling barrier was demonstrated. The asymmetric chemical doping to graphene with linear dispersion property induces rectifying behavior effectively, by facilitating Fowler-Nordheim tunneling at high forward biases. It results in excellent diode performances of a hetero-structured graphene/h-BN/graphene tunneling diode, with an asymmetric factor exceeding 1000, a nonlinearity of ∼40, and a peak sensitivity of ∼12 V{sup −1}, which are superior to contending metal-insulator-metal diodes, showing great potential for future flexible and transparent electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Schottky contacts to In{sub 2}O{sub 3}

n-type binary compound semiconductors such as InN, InAs, or In{sub 2}O{sub 3} are especial because the branch-point energy or charge neutrality level lies within the conduction band. Their tendency to form a surface electron accumulation layer prevents the formation of rectifying Schottky contacts. Utilizing a reactive sputtering process in an oxygen-containing atmosphere, we demonstrate Schottky barrier diodes on indium oxide thin films with rectifying properties being sufficient for space charge layer spectroscopy. Conventional non-reactive sputtering resulted in ohmic contacts. We compare the rectification of Pt, Pd, and Au Schottky contacts on In{sub 2}O{sub 3} and discuss temperature-dependent current-voltage characteristics of Pt/In{sub 2}O{sub 3} in detail. The results substantiate the picture of oxygen vacancies being the source of electrons accumulating at the surface, however, the position of the charge neutrality level and/or the prediction of Schottky barrier heights from it are questioned.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Carbon doping induced peculiar transport properties of boron nitride nanoribbons p-n junctions

By applying nonequilibrium Green's function combined with density functional theory, we investigate the electronic transport properties of carbon-doped p-n nanojunction based on hexagonal boron nitride armchair nanoribbons. The calculated I-V curves show that both the center and edge doping systems present obvious negative differential resistance (NDR) behavior and excellent rectifying effect. At low positive bias, the edge doping systems possess better NDR performance with larger peak-to-valley ratio (∼10{sup 5}), while at negative bias, the obtained peak-to-valley ratio for both of the edge and center doping systems can reach the order of 10{sup 7}. Meanwhile, center doping systems present better rectifying performance than the edge doping ones, and giant rectification ratio up to 10{sup 6} can be obtained in a wide bias range. These outstanding transport properties are explained by the evolution of the transmission spectra and band structures with applied bias, together with molecular projected self-consistent Hamiltonian eigenvalues and eigenstates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement and understanding of single-molecule break junction rectification caused by asymmetric contacts

The contact effects of single-molecule break junctions on rectification behaviors were experimentally explored by a systematic control of anchoring groups of 1,4-disubstituted benzene molecular junctions. Single-molecule conductance and I-V characteristic measurements reveal a strong correlation between rectifying effects and the asymmetry in contacts. Analysis using energy band models and I-V calculations suggested that the rectification behavior is mainly caused by asymmetric coupling strengths at the two contact interfaces. Fitting of the rectification ratio by a modified Simmons model we developed suggests asymmetry in potential drop across the asymmetric anchoring groups as the mechanism of rectifying I-V behavior. This study provides direct experimental evidence and sheds light on the mechanisms of rectification behavior induced simply by contact asymmetry, which serves as an aid to interpret future single-molecule electronic behavior involved with asymmetric contact conformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of some basic physical parameters of SnO based on SnO/Si pn heterojunctions

P-SnO/n-Si heterojunctions were constructed by using e-beam evaporation in combination with ultra-violet lithography technique. The current-voltage and capacitance-voltage characteristics of the pn heterojunctions were systematically investigated, through which the diode parameters, such as the turn-on voltage, forward-to-reverse current ratio, series resistance, ideality factor, and build-in voltage, were also determined. In particular, the pn heterojunctions presented a relatively good electrical rectifying behavior, with a forward-to-reverse current ratio up to 58 ± 5 at ±2.0 V. The relative permittivity and work function of the SnO films were measured to be 18.8 ± 1.7 and 4.3 eV, respectively. The energy band diagram of the heterojunctions was depicted in detail, which can interpret the rectifying behavior very well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radio frequency sheaths in an oblique magnetic field

The physics of radio-frequency (rf) sheaths near a conducting surface is studied for plasmas immersed in a magnetic field that makes an oblique angle θ with the surface. A set of one-dimensional equations is developed that describes the dynamics of the time-dependent magnetic presheath and non-neutral Debye sheath. The model employs Maxwell-Boltzmann electrons, and the magnetization and mobility of the ions is determined by the magnetic field strength, and wave frequency, respectively. The angle θ, assumed to be large enough to insure an electron-poor sheath, is otherwise arbitrary. Concentrating on the ion-cyclotron range of frequencies, the equations are solved numerically to obtain the rectified (dc) voltage, the rf voltage across the sheath, and the rf current flowing through the sheath. As an application of this model, the sheath voltage-current relation is used to obtain the rf sheath impedance, which in turn gives an rf sheath boundary condition for the electric field at the sheath-plasma interface that can be used in rf wave codes. In general, the impedance has both resistive and capacitive contributions, and generalizes previous sheath boundary condition models. The resistive part contributes to parasitic power dissipation at the wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Unidirectional oxide hetero-interface thin-film diode

The unidirectional thin-film diode based on oxide hetero-interface, which is well compatible with conventional thin-film fabrication process, is presented. With the metal anode/electron-transporting oxide (ETO)/electron-injecting oxide (EIO)/metal cathode structure, it exhibits that electrical currents ohmically flow at the ETO/EIO hetero-interfaces for only positive voltages showing current density (J)-rectifying ratio of ∼10{sup 5} at 5 V. The electrical properties (ex, current levels, and working device yields) of the thin-film diode (TFD) are systematically controlled by changing oxide layer thickness. Moreover, we show that the oxide hetero-interface TFD clearly rectifies an AC input within frequency (f) range of 10{sup 2} Hz < f < 10{sup 6} Hz, providing a high feasibility for practical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ballistic rectification of vortex domain wall chirality at nanowire corners

The interactions of vortex domain walls with corners in planar magnetic nanowires are probed using magnetic soft X-ray transmission microscopy. Here,we show that when the domain walls are propagated into sharp corners using applied magnetic fields above a critical value, their chiralities are rectified to either clockwise or anticlockwise circulation depending on whether the corners turn left or right. Single-shot focused magneto-optic Kerr effect measurements are then used to demonstrate how, when combined with modes of domain propagation that conserve vortex chirality, this allows us to dramatically reduce the stochasticity of domain pinning at artificial defect sites. In conclusion, our results provide a tool for controlling domain wall chirality and pinning behavior both in further experimental studies and in future domain wall-based memory, logic and sensor technologies.

36 MATERIALS SCIENCE↗

Electric field dependence of junction magnetoresistance in magnetite/semiconductor heterostructure at room temperature

We have fabricated Fe{sub 3}O{sub 4}/p-Si heterojunction using pulsed laser deposition technique and explored its electro-magnetic transport properties. The heterojunction exhibits backward rectifying property at all temperatures, and appraisal of giant junction magnetoresistance (JMR) is observed at room temperature (RT). Conspicuously, the variation and sign change of JMR as a function of electric field is observed at RT. The backward rectifying behavior of the device is ascribed to the highly doped p-type (p{sup ++}) semiconducting nature of Fe{sub 3}O{sub 4}, and the origin of electric field (voltage) dependence of magnetoresistance is explained proposing electronic band diagram of Fe{sub 3}O{sub 4}/SiO{sub 2}/p-Si heterojunction. This interesting result may have importance to integrate Si-based magnetoresistance sources in multifunctional spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thickness, humidity, and polarization dependent ferroelectric switching and conductivity in Mg doped lithium niobate

Mg doped lithium niobate (Mg:LN) exhibits several advantages over undoped LN such as resistance to photorefraction, lower coercive fields, and p-type conductivity that is particularly pronounced at domain walls and opens up a range of applications, e.g., in domain wall electronics. Engineering of precise domain patterns necessitates well founded knowledge of switching kinetics, which can differ significantly from that of undoped LN. In this work, the role of humidity and sample composition in polarization reversal has been investigated under application of the same voltage waveform. Control over domain sizes has been achieved by varying the sample thickness and initial polarization as well as atmospheric conditions. In addition, local introduction of proton exchanged phases allows for inhibition of domain nucleation or destabilization, which can be utilized to modify domain patterns. Polarization dependent current flow, attributed to charged domain walls and band bending, demonstrates the rectifying ability of Mg:LN in combination with suitable metal electrodes that allow for further tailoring of conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Semiconducting ZnSnN{sub 2} thin films for Si/ZnSnN{sub 2} p-n junctions

ZnSnN{sub 2} is regarded as a promising photovoltaic absorber candidate due to earth-abundance, non-toxicity, and high absorption coefficient. However, it is still a great challenge to synthesize ZnSnN{sub 2} films with a low electron concentration, in order to promote the applications of ZnSnN{sub 2} as the core active layer in optoelectronic devices. In this work, polycrystalline and high resistance ZnSnN{sub 2} films were fabricated by magnetron sputtering technique, then semiconducting films were achieved after post-annealing, and finally Si/ZnSnN{sub 2} p-n junctions were constructed. The electron concentration and Hall mobility were enhanced from 2.77 × 10{sup 17} to 6.78 × 10{sup 17 }cm{sup −3} and from 0.37 to 2.07 cm{sup 2} V{sup −1} s{sup −1}, corresponding to the annealing temperature from 200 to 350 °C. After annealing at 300 °C, the p-n junction exhibited the optimum rectifying characteristics, with a forward-to-reverse ratio over 10{sup 3}. The achievement of this ZnSnN{sub 2}-based p-n junction makes an opening step forward to realize the practical application of the ZnSnN{sub 2} material. In addition, the nonideal behaviors of the p-n junctions under both positive and negative voltages are discussed, in hope of suggesting some ideas to further improve the rectifying characteristics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temperature dependent simulation of diamond depleted Schottky PIN diodes

Diamond is considered as an ideal material for high field and high power devices due to its high breakdown field, high lightly doped carrier mobility, and high thermal conductivity. The modeling and simulation of diamond devices are therefore important to predict the performances of diamond based devices. In this context, we use Silvaco{sup ®} Atlas, a drift-diffusion based commercial software, to model diamond based power devices. The models used in Atlas were modified to account for both variable range and nearest neighbor hopping transport in the impurity bands associated with high activation energies for boron doped and phosphorus doped diamond. The models were fit to experimentally reported resistivity data over a wide range of doping concentrations and temperatures. We compare to recent data on depleted diamond Schottky PIN diodes demonstrating low turn-on voltages and high reverse breakdown voltages, which could be useful for high power rectifying applications due to the low turn-on voltage enabling high forward current densities. Three dimensional simulations of the depleted Schottky PIN diamond devices were performed and the results are verified with experimental data at different operating temperatures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reduction in RF sheath rectification with insulating antenna enclosure walls

Abstract Radiofrequency (RF) sheath rectification is one of the most prominent deleterious effects associated with ion cyclotron range of frequencies (ICRF) heating in fusion plasmas. RF sheaths and associated effects, such as impurity generation and convective cell generation, need to be mitigated to ensure that ICRF is a viable option for heating in future fusion devices. Experiments were performed on the Large Plasma Device (LAPD) at UCLA to explore the effects of using electrically-insulating antenna enclosures on RF rectified sheaths. Three different enclosure side-wall materials were used, including copper, MACOR (electrically insulating), and MACOR over copper. In the case of the MACOR–copper side walls, the non-conductive MACOR material was exposed to the bulk plasma but a layer of copper was added below to allow for image currents to flow. All three of the experiments had similar plasma density, temperature, and background magnetic field. In the case of the copper enclosure, RF rectified potentials, many times the local electron temperature, and associated formation of convective cells were observed and reported Martin M. et al (2017 Phys. Rev. Lett. 119 205002). In the experiments with MACOR and MACOR–copper enclosures, RF rectification was significantly reduced. Additionally, these latter two experiments showed no evidence of convective cell formation. Although the results from the MACOR experiment are reminiscent of the results obtained in ASDEX-U with a three-strap antenna optimized to reduce image currents on the antenna limiters Bobkov V. et al (2016 Nucl. Fusion 56 084001), the MACOR–copper experiment seems to suggest that insulating plasma facing materials have at least an equally strong impact on reducing potential rectification.

Physics↗