Potassium turboalternator preliminary design study. Volume 2 - Refinement of selected turboalternator layout, phase 2
Potassium turboalternator preliminary design, turbogenerator layout
Schnetzer, E.↗
SEARCH · Search NASA
Results for “refinement”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Gravity field refinement by satellite to satellite Doppler tracking
Satellite to satellite Doppler tracking with high resolution of gravity field
Schwarz, C. R.↗
Spaceborne computer multi-element system configuration architecture refinement, task 1 report
Architectural design of spaceborne computer system operating in multi-element configuration
Kennedy, J. R., Sr.↗
Improvements of magnetic heads through the use of new and refined core materials
A process for making ferromagnetic films with high permeability and development of the technology for fabricating a magnetic head using these films are reported. An interim head was successfully built, tested, and delivered for evaluation and a process for sputtering high permeability films has been developed. Two heads with deposited pole tips have been tested and delivered. One had a 0.0001 inch gap and the other a 0.0003 inch gap. Both heads were boned with epoxy but served to test the geometry of the head design.
Source record↗
Grain refinement control in gas-shielded arc welding of aluminum tubing
When sections are being welded, operator varies pulse rate of power supply and simultaneously monitors signal on oscilloscope until rate is found which produces maximum arc gas voltage. Remainder of welding is performed with power supply set at this pulse rate, producing desired maximum weld puddle agitation and fine uniform weld of grain structure.
Iceland, W. F.↗
Refinement of the gravity field by satellite-to-satellite Doppler tracking.
The question of what resolution of the gravity field can be obtained from satellite-to-satellite Doppler tracking was investigated by performing least-squares adjustments of simulated Doppler data, solving for parameters describing the anomalous gravity field in various sized blocks. By examining the correlation between the adjusted parameters describing neighboring blocks, it was possible to judge whether a given set of data was capable of resolving blocks of a given size. Two concepts of satellite-to-satellite tracking are considered: the first involves two satellites near together in very low orbits, while the second uses geostationary satellites to track a single very low satellite. In either case, blocks 500 km on a side can be satisfactorily resolved from an orbital altitude of 700 km. From an altitude of 200 km, blocks 200 km on a side can be resolved. Because of the lower limit on altitude imposed by the presence of the earth's atmosphere, it does not appear that satellite-to-satellite Doppler tracking will be able to resolve features smaller than 200 km on a side.
Schwarz, C. R.↗
A refined analysis of composite laminates
The purpose of this paper is to develop a sufficiently accurate analysis, which is much simpler than exact three-dimensional analysis, for statics and dynamics of composite laminates. The governing differential equations and boundary conditions are derived by following a variational approach. The displacements are assumed piecewise linear across the thickness and the effects of transverse shear deformations and rotary inertia are included. A procedure for obtaining the general solution of the above governing differential equations in the form of hyperbolic-trigonometric series is given. The accuracy of the present theory is assessed by obtaining results for free vibrations and flexure of simply supported rectangular laminates and comparing them with results from exact three-dimensional analysis.
Srinivas, S.↗
Sequential filter design for precision orbit determination and physical constant refinement
Earth-based spacecraft tracking data have historically been processed with classical least squares filtering techniques both for navigation purposes and for physical constant determination. The small, stochastic nongravitational forces acting on the spacecraft are described to motivate the use of sequential estimation as an alternative to the least squares fitting procedures. The stochastic forces are investigated both in terms of their effect on the tracking data and their influence on estimation accuracy. A flexible sequential filter design which leaves the existing trajectory, variational equations, data observable and partial computations undisturbed is described. A detailed filter design is presented that meets the precision demands and flexibility requirements of deep space navigation and of scientific problems.
Curkendall, D. W.↗
Refinement of the Goloseyev catalog point coordinates in the limb zone and determination of point coordinates on the back side of the moon
Lunar photography from Zond 6 showed half the side of the moon which is not visible from the earth, and this made it possible to construct a photogrammetric grid encompassing the entire Western Hemisphere and referenced to points of the visible side, whose coordinates were taken from the Goloseyev catalog. The problem was solved using two pictures taken from approximately 9000 km above the lunar surface. The photogrammetric grid was constructed by joint statistical analysis of the measurements of both pictures and the selenographic coordinates of the catalog points. A special algorithm was developed and a program compiled realizing the maximum likelihood method which permitted working with up to 120 catalog points simultaneously.
Krasikov, V. A.↗
Refinement in black chrome for use as a solar selective coating
Black chrome is significant as a solar selective coating because the current extensive use of black chrome in the electroplating industry as a durable decorative finish makes black chrome widely available on a commercial scale and potentially low in cost as a solar selective coating. Black-chrome deposits were modified by underplating with dull nickel or by being plated on rough surfaces. Both of these procedures increased the visible absorptance. There was no change in the infrared reflectance for the dull-nickel - black-chrome combination from that reported for the bright-nickel - black-chrome combination. However, the bright-nickel - black-chrome coating plated on rough surfaces indicated a slight decrease in infrared reflectance. As integrated over the solar spectrum for air mass 2, the reflectance of the dull-nickel - black-chrome coating was 0.077, of the bright-nickel - black-chrome coating plated on a 0.75-micron (30-microinch) surface was 0.070, of the bright-nickel - black-chrome coating plated on a 2.5 micron (100-microinch) surface was 0.064. The corresponding values for the bright-nickel - black-chrome coating on a 0.0125-micron (0.5-microinch) surface, two samples of black nickel, and two samples of Nextrel black paint were 0.132, 0.123, 0.133, and 0.033, respectively.
Mcdonald, G. E.↗
Refinement of the basic radar equation for clouds and precipitation
A derivation of the basic radar equation for clouds and precipitation is given that takes into account the antenna radiation pattern. The reasons for the differences in the equations used by various authors are demonstrated. More rigorous forms for writing down the basic equation are given.
Salman, Y. M.↗
Grain refinement control in TIG arc welding
A method for controlling grain size and weld puddle agitation in a tungsten electrode inert gas welding system to produce fine, even grain size and distribution is disclosed. In the method the frequency of dc welding voltage pulses supplied to the welding electrode is varied over a preselected frequency range and the arc gas voltage is monitored. At some frequency in the preselected range the arc gas voltage will pass through a maximum. By maintaining the operating frequency of the system at this value, maximum weld puddle agitation and fine grain structure are produced.
Iceland, W. F.↗
Refinement and validation of two digital Microwave Landing System (MLS) theoretical models
Two digital microwave landing system theoretical models are considered which are generic models for the Doppler and scanning-beam frequency reference versions of the MLS. These models represent errors resulting from both system noise and discrete multipath. The data used for the validation effort were obtained from the Texas Instrument conventional scanning beam and the Hazeltine Doppler feasibility hardware versions of the MLS. Topics discussed include tape read software, time history plots, computation of power spectral density, smoothed power spectra, best-fit models, different equations for digital simulation, and discrete multipath errors.
Duff, W. G.↗
Ground truth applications to orbit refinements
A weighted least-squares recursive estimator program is reported for simulating spacecraft orbital position by analyzing earth and sun sensor data. The program uses constant time adjustment for a set of ephemeris data to eliminate intrack error and to improve attitude determination accuracy.
White, R. L.↗
Nominal Profile Refinements Report: Target in 120 Nautical Mile Circular Orbit
The compability of the nominal rendezvous sequence with low target orbits is addressed. It was found that for targets in low earth orbits certain modifications of the nominal sequence are required to achieve a feasible anytime liftoff capability, notably the use of elliptical phasing orbits and the allowance of up to two days for rendezvous under certain phasing conditions.
Source record↗
Study leading to the refinement of the SRB structural analysis program
The constructed SRB math model was used for the analysis of the 85/32/5(VV/VH/theta) cavity collapse load condition for the aft end of the SRB structure. Linear, nonlinear collapse and bifurcation buckling analyses were performed. The linear and bifurcation buckling analyses showed that structural integrity and positive margins of safety are maintained for the applied maximum load case using a design factor of 1.25. The nonlinear collapse analysis predicts stresses in the skirt above the yield for a load factor of 1.0. Applying the 1.25 design factor gives a negative margin of safety against the material ultimate. The predicted collapse occurs at a load factor higher than 1.25.
Jones, W. E.↗
Evaluation of the mechanical properties of electroslag refined iron alloys
Nitronic 40 (21Cr-6N-9Mn), HY-130, 9Ni-4Co, and D-6 alloys were prepared and evaluated in the form of 15.2 mm thick plates. Smooth bar tensile tests, double-edge sharp notch fracture toughness tests Charpy V-notch impact tests were conducted on appropriate heat treated specimens of the four steel plates at 22 C, -50 C, -100 C, -150 C, and -196 C. Similar material characterization, including metallographic evaluation studies on air melt and vacuum arc melt grades of same four alloy steels were conducted for comparative purposes. A cost analysis of manufacturing plates of air melt, electroslag remelt and vacuum arc remelt grades was performed. The results of both material characterization and cost analyses pointed out certain special benefits of electroslag processing iron base alloys.
Bhat, G. K.↗
STS payloads mission control study continuation phase A-1. Volume 2-B: Task 2. Evaluation and refinement of implementation guidelines for the selected STS payload operator concept
The functions of Payload Operations Control Centers (POCC) at JSC, GSFC, JPL, and non-NASA locations are analyzed to establish guidelines for standardization, and facilitate the development of a fully integrated NASA-wide system of ground facilities for all classes of payloads. Operational interfaces between the space transportation system operator and the payload operator elements are defined. The advantages and disadvantages of standardization are discussed.
Source record↗