Search NASA⌕ Search

SEARCH · Search NASA

Results for “sequence alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Impedance Characterization of Utility-Scale Renewable Energy and Storage Systems: Preprint

This paper presents the impedance characterization of utility-scale wind turbines and PV/storage inverters using a multimegawatt grid simulator-based grid integration testbed. The paper describes testbed components including a 7 MVA grid simulator, 5 MW dynamometer, medium-voltage measurement system, and real-time control system used for automated impedance characterization of wind turbines and inverters. Different aspects of impedance measurement are discussed, including the selection of the magnitude and type of perturbation, measurement of frequency cross-coupling between sequence impedance responses, and the alignment of the reference frame for sequence impedance measurement. The paper also demonstrates high-fidelity validation of EMT simulation models and characterization of grid-forming inverters using impedance measurements.

17 WIND ENERGY↗

Impedance Measurement of Wind Turbines using a Multimegawatt Grid Simulator: Preprint

This paper presents the impedance measurements of a 4 MW wind turbine conducted using a multimegawatt grid simulator at the National Renewable Energy Laboratory in Colorado, United States. This paper describes different systems, including a 7 MVA grid simulator, a 5 MW dynamometer, a medium-voltage measurement system, and a real-time control system used for the automated impedance measurement of a utility-scale wind turbine. Different aspects of impedance measurement are discussed, including the selection of the magnitude of injected perturbation, measurement of frequency cross-coupling between the sequence impedance responses, and the alignment of the reference frame for sequence impedance measurement. The paper also demonstrates high-fidelity validation of an EMT simulation model of the wind turbine using impedance measurements.

24 POWER TRANSMISSION AND DISTRIBUTION↗

The Release 6 reference sequence of the Drosophila melanogaster genome

Drosophila melanogaster plays an important role in molecular, genetic, and genomic studies of heredity, development, metabolism, behavior, and human disease. The initial reference genome sequence reported more than a decade ago had a profound impact on progress in Drosophila research, and improving the accuracy and completeness of this sequence continues to be important to further progress. We previously described improvement of the 117-Mb sequence in the euchromatic portion of the genome and 21 Mb in the heterochromatic portion, using a whole-genome shotgun assembly, BAC physical mapping, and clone-based finishing. Here, we report an improved reference sequence of the single-copy and middle-repetitive regions of the genome, produced using cytogenetic mapping to mitotic and polytene chromosomes, clone-based finishing and BAC fingerprint verification, ordering of scaffolds by alignment to cDNA sequences, incorporation of other map and sequence data, and validation by whole-genome optical restriction mapping. These data substantially improve the accuracy and completeness of the reference sequence and the order and orientation of sequence scaffolds into chromosome arm assemblies. Representation of the Y chromosome and other heterochromatic regions is particularly improved. The new 143.9-Mb reference sequence, designated Release 6, effectively exhausts clone-based technologies for mapping and sequencing. Highly repeat-rich regions, including large satellite blocks and functional elements such as the ribosomal RNA genes and the centromeres, are largely inaccessible to current sequencing and assembly methods and remain poorly represented. In conclusion, further significant improvements will require sequencing technologies that do not depend on molecular cloning and that produce very long reads.

59 BASIC BIOLOGICAL SCIENCES↗

Automated registration of multispectral MR vessel wall images of the carotid artery

Purpose: Atherosclerosis is the primary cause of heart disease and stroke. The detailed assessment of atherosclerosis of the carotid artery requires high resolution imaging of the vessel wall using multiple MR sequences with different contrast weightings. These images allow manual or automated classification of plaque components inside the vessel wall. Automated classification requires all sequences to be in alignment, which is hampered by patient motion. In clinical practice, correction of this motion is performed manually. Previous studies applied automated image registration to correct for motion using only nondeformable transformation models and did not perform a detailed quantitative validation. The purpose of this study is to develop an automated accurate 3D registration method, and to extensively validate this method on a large set of patient data. In addition, the authors quantified patient motion during scanning to investigate the need for correction. Methods: MR imaging studies (1.5T, dedicated carotid surface coil, Philips) from 55 TIA/stroke patients with ipsilateral <70% carotid artery stenosis were randomly selected from a larger cohort. Five MR pulse sequences were acquired around the carotid bifurcation, each containing nine transverse slices: T1-weighted turbo field echo, time of flight, T2-weighted turbo spin-echo, and pre- and postcontrast T1-weighted turbo spin-echo images (T1W TSE). The images were manually segmented by delineating the lumen contour in each vessel wall sequence and were manually aligned by applying throughplane and inplane translations to the images. To find the optimal automatic image registration method, different masks, choice of the fixed image, different types of the mutual information image similarity metric, and transformation models including 3D deformable transformation models, were evaluated. Evaluation of the automatic registration results was performed by comparing the lumen segmentations of the fixed image and moving image after registration. Results: The average required manual translation per image slice was 1.33 mm. Translations were larger as the patient was longer inside the scanner. Manual alignment took 187.5 s per patient resulting in a mean surface distance of 0.271 ± 0.127 mm. After minimal user interaction to generate the mask in the fixed image, the remaining sequences are automatically registered with a computation time of 52.0 s per patient. The optimal registration strategy used a circular mask with a diameter of 10 mm, a 3D B-spline transformation model with a control point spacing of 15 mm, mutual information as image similarity metric, and the precontrast T1W TSE as fixed image. A mean surface distance of 0.288 ± 0.128 mm was obtained with these settings, which is very close to the accuracy of the manual alignment procedure. The exact registration parameters and software were made publicly available. Conclusions: An automated registration method was developed and optimized, only needing two mouse clicks to mark the start and end point of the artery. Validation on a large group of patients showed that automated image registration has similar accuracy as the manual alignment procedure, substantially reducing the amount of user interactions needed, and is multiple times faster. In conclusion, the authors believe that the proposed automated method can replace the current manual procedure, thereby reducing the time to analyze the images.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Genome-Wide Transcription Factor DNA Binding Sites and Gene Regulatory Networks in Clostridium thermocellum

Clostridium thermocellum is a thermophilic bacterium recognized for its natural ability to effectively deconstruct cellulosic biomass. While there is a large body of studies on the genetic engineering of this bacterium and its physiology to-date, there is limited knowledge in the transcriptional regulation in this organism and thermophilic bacteria in general. The study herein is the first report of a large-scale application of DNA-affinity purification sequencing (DAP-seq) to transcription factors (TFs) from a bacterium. We applied DAP-seq to > 90 TFs in C. thermocellum and detected genome-wide binding sites for 11 of them. We then compiled and aligned DNA binding sequences from these TFs to deduce the primary DNA-binding sequence motifs for each TF. These binding motifs are further validated with electrophoretic mobility shift assay (EMSA) and are used to identify individual TFs’ regulatory targets in C. thermocellum . Our results led to the discovery of novel, uncharacterized TFs as well as homologues of previously studied TFs including RexA-, LexA-, and LacI-type TFs. We then used these data to reconstruct gene regulatory networks for the 11 TFs individually, which resulted in a global network encompassing the TFs with some interconnections. As gene regulation governs and constrains how bacteria behave, our findings shed light on the roles of TFs delineated by their regulons, and potentially provides a means to enable rational, advanced genetic engineering of C. thermocellum and other organisms alike toward a desired phenotype.

59 BASIC BIOLOGICAL SCIENCES↗

Genome-wide Transcription Factor DNA Binding Sites and Gene Regulatory Networks in Clostridium thermocellum

Clostridium thermocellum is a thermophilic bacterium recognized for its natural ability to effectively deconstruct cellulosic biomass. While there is a large body of studies on the genetic engineering of this bacterium and its physiology to-date, there is limited knowledge in the transcriptional regulation in this organism and thermophilic bacteria in general. The study herein is the first report of a high-throughput application of DNA-affinity purification sequencing (DAP-seq) to transcription factors (TFs) from a thermophile. We applied DAP-seq to >90 TFs in C. thermocellum and detected genome-wide binding sites for 11 of them. We then compiled and aligned DNA binding sequences from these TFs to deduce the primary DNA-binding sequence motifs for each TF. These binding motifs are further validated with electrophoretic mobility shift assay (EMSA) and are used to identify individual TFs’ regulatory targets in C. thermocellum. Our results led to the discovery of novel, uncharacterized TFs as well as homologues of previously studied TFs including RexA-, LexA- and LacI-type TFs. We then used these data to reconstruct gene regulatory networks for the 11 TFs individually, which resulted in a global network encompassing the TFs with some interconnections. As gene regulation governs and constrains how bacteria behave, our findings shed light on the roles of TFs delineated by their regulons, and potentially provides a means to enable rational, advanced genetic engineering of C. thermocellum and other organisms alike towards a desired phenotype.

09 BIOMASS FUELS↗

Parameters of proteome evolution from histograms of amino-acid sequence identities of paralogous proteins

Background: The evolution of the full repertoire of proteins encoded in a given genome is mostly driven by gene duplications, deletions, and sequence modifications of existing proteins. Indirect information about relative rates and other intrinsic parameters of these three basic processes is contained in the proteome-wide distribution of sequence identities of pairs of paralogous proteins. Results: We introduce a simple mathematical framework based on a stochastic birth-and-death model that allows one to extract some of this information and apply it to the set of all pairs of paralogous proteins in H. pylori, E. coli, S. cerevisiae, C. elegans, D. melanogaster, and H. sapiens. It was found that the histogram of sequence identities p generated by an all-to-all alignment of all protein sequences encoded in a genome is well fitted with a power-law form ~ p-γ with the value of the exponent γ around 4 for the majority of organisms used in this study. This implies that the intraprotein variability of substitution rates is best described by the Gamma-distribution with the exponent α ≈ 0.33. Different features of the shape of such histograms allow us to quantify the ratio between the genome-wide average deletion/duplication rates and the amino-acid substitution rate. Conclusion: We separately measure the short-term ("raw") duplication and deletion rates , which include gene copies that will be removed soon after the duplication event and their dramatically reduced long-term counterparts rdup, rdel. High deletion rate among recently duplicated proteins is consistent with a scenario in which they didn't have enough time to significantly change their functional roles and thus are to a large degree disposable. Systematic trends of each of the four duplication/deletion rates with the total number of genes in the genome were analyzed. All but the deletion rate of recent duplicates were shown to systematically increase with Ngenes. Abnormally flat shapes of sequence identity histograms observed for yeast and human are consistent with lineages leading to these organisms undergoing one or more whole-genome duplications. This interpretation is corroborated by our analysis of the genome of Paramecium tetraurelia where the p-4 profile of the histogram is gradually restored by the successive removal of paralogs generated in its four known whole-genome duplication events.

59 BASIC BIOLOGICAL SCIENCES↗

Sample Type Adaptable RNA depletion performance data [Slides]

Sequencing data was aligned to rRNA data sets QIIME_16S_MiDAS_4.8.1 and SILVA_138.1_LSURef_NR99 using BWA. RNA used was a composite (pool) of wastewater RNA samples collected at LANL between April 2022 and December 2022. RNA sample was split into four aliquots (STAR depletion and STAR depletion no-probe-control as well as RiboZero and RiboZero no-probe-control). All sequencing libraries were prepared from the depleted RNA samples using the same library prep method and sequenced on Illumina platforms.

59 BASIC BIOLOGICAL SCIENCES↗

CoverM: read alignment statistics for metagenomics

SUMMARY: Genome-centric analysis of metagenomic samples is a powerful method for understanding the function of microbial communities. Calculating read coverage is a central part of analysis, enabling differential coverage binning for recovery of genomes and estimation of microbial community composition. Coverage is determined by processing read alignments to reference sequences of either contigs or genomes. Per-reference coverage is typically calculated in an ad-hoc manner, with each software package providing its own implementation and specific definition of coverage. Here we present a unified software package CoverM which calculates several coverage statistics for contigs and genomes in an ergonomic and flexible manner. It uses "Mosdepth arrays" for computational efficiency and avoids unnecessary I/O overhead by calculating coverage statistics from streamed read alignment results. AVAILABILITY AND IMPLEMENTATION: CoverM is free software available at https://github.com/wwood/coverm. CoverM is implemented in Rust, with Python (https://github.com/apcamargo/pycoverm) and Julia (https://github.com/JuliaBinaryWrappers/CoverM_jll.jl) interfaces.

Aroney, Samuel T N↗

Thermally Induced Reorganization in LCP Fibers Molecular Origin of Mechanical Strength

The molecular reorganization occurring in liquid crystalline polymer fiber during heat treatment is of great interest for many commercial reasons. Using thermal analysis techniques, WAXS and real time temperature dependent synchrotron SAXS, the structure and morphology of commercial LCP (liquid crystalline polymer), Vectran, HBA/HNA (p-hydroxybenzoic acid/6-hydroxy-2-naphthoic acid), and its variant polymer fiber COTBP, HBA/HNA/BP/TA (BP-benzophenone, TA-terephthalic acid), have been examined. Both fibers have the typical liquid crystalline polymer structure, i.e., highly aligned with aperiodic sequencing along the fiber axis. There is a three-fold increase in strength in both fibers with heat treatment; however, the modulus is observed to increase significantly in COTBP but not in Vectran. This paper reports on the changes and the differences on the structural and morphological behavior for both the as-spun and heat-treated LCP fibers. We propose an 'oriented entanglement' model to describe the differences between the two polymer fibers.

36 MATERIALS SCIENCE↗

The Crystal Structure of the Extracellular 11-heme Cytochrome UndA Reveals a Conserved 10-heme Motif and Defined Binding Site for Soluble Iron Chelates.

Members of the genus Shewanella translocate deca- or undeca-heme cytochromes to the external cell surface thus enabling respiration using extracellular minerals and polynuclear Fe(III) chelates. The high resolution structure of the first undeca-heme outer membrane cytochrome, UndA, reveals a crossed heme chain with four potential electron ingress/egress sites arranged within four domains. Sequence and structural alignment of UndA and the deca-heme MtrF reveals the extra heme of UndA is inserted between MtrF hemes 6 and 7. The remaining UndA hemes can be superposed over the heme chain of the decaheme MtrF, suggesting that a ten heme core is conserved between outer membrane cytochromes. The UndA structure is the first outer membrane cytochrome to be crystallographically resolved in complex with substrates, an Fe(III)-nitrilotriacetate dimer or an Fe(III)-citrate trimer. The structural resolution of these UndA-Fe(III)-chelate complexes provides a rationale for previous kinetic measurements on UndA and other outer membrane cytochromes.

59 BASIC BIOLOGICAL SCIENCES↗

Identification of 2-Hydroxyacyl-CoA Synthases with High Acyloin Condensation Activity for Orthogonal One-Carbon Bioconversion

One-carbon (C1) compounds are emerging as cost-effective and potentially carbon-negative feedstocks for biomanufacturing, which require efficient, versatile metabolic platforms for the synthesis of value-added products. Synthetic formyl-CoA elongation (FORCE) pathways allow diverse product synthesis from C1 compounds via iterative C1 elongation, operating independently from the host metabolism with reduced engineering complexity and improved theoretical yields. However, a major bottleneck was identified as the suboptimal kinetics of the core C1–C1 condensation enzyme, 2-hydroxyacyl-CoA synthase (HACS), catalyzing the acyloin condensation reaction between formaldehyde and formyl-CoA. Furthermore, we used a combinatorial approach of bioprospecting and rational protein engineering to identify multiple HACS variants with significantly improved activities toward C1 substrates. Sequence and structure alignment of the active variants elucidated the key regions for the catalytic function, which were targeted for mutagenesis, leading to improved catalytic efficiency. In parallel, a consecutive round of bioprospecting for homologs with high similarity with active variants revealed a highly active HACS variant exhibiting up to 7-fold improvement in catalytic efficiency (k cat /K M ) and 14-fold improvement in the FORCE pathway flux in vivo compared to the previous reports. Upon further optimization of the downstream pathway, the orthogonal C1-to-product bioconversion system showed a metabolic flux of up to 700 μM glycolate OD –1 h –1 (2.1 mmol gDCW –1 h –1 ) and an industrially relevant glycolate titer, rate, and yield of 5.2 g L –1 (67.8 mM), 0.22 g L –1 h –1 , and 94% carbon yield, respectively.

2-hydroxyacyl-CoA synthase↗

Navigating the maze: the impact of configurability in bioinformatics software

The bioinformatics software domain contains thousands of applications for automating tasks such as the pairwise alignment of DNA sequences, building and reasoning about metabolic models or simulating growth of an organism. Its end users range from sophisticated developers to those with little computational experience. In response to their needs, developers provide many options to customize the way their algorithms are tuned. Yet there is little or no automated help for the user in determining the consequences or impact of the options they choose. In this paper we describe our experience working with configurable bioinformatics tools. We find limited documentation and help for combining and selecting options along with variation in both functionality and performance. We also find previously undetected faults. We summarize our findings with a set of lessons learned, and present a roadmap for creating automated techniques to interact with bioinformatics software. We believe these will generalize to other types of scientific software.

McDevitt, Mikaela Cashman↗

Classification of Complete Proteomes of Different Organisms and Protein Sets Based on Their Protein Distributions in Terms of Some Key Attributes of Proteins

The existence of complete genome sequences makes it important to develop different approaches for classification of large-scale data sets and to make extraction of biological insights easier. Here, we propose an approach for classification of complete proteomes/protein sets based on protein distributions on some basic attributes. We demonstrate the usefulness of this approach by determining protein distributions in terms of two attributes: protein lengths and protein intrinsic disorder contents (ID). The protein distributions based on L and ID are surveyed for representative proteome organisms and protein sets from the three domains of life. The two-dimensional maps (designated as fingerprints here) from the protein distribution densities in the LD space defined by ln( L ) and ID are then constructed. The fingerprints for different organisms and protein sets are found to be distinct with each other, and they can therefore be used for comparative studies. As a test case, phylogenetic trees have been constructed based on the protein distribution densities in the fingerprints of proteomes of organisms without performing any protein sequence comparison and alignments. The phylogenetic trees generated are biologically meaningful, demonstrating that the protein distributions in the LD space may serve as unique phylogenetic signals of the organisms at the proteome level.

59 BASIC BIOLOGICAL SCIENCES↗

PASTIS v0.1

PASTIS is a distributed-memory library for aligning large protein sequence sets and constructing protein similarity networks.

Buluc, Aydin↗

Structural models and functional annotations for the Sphagnum divinum proteome

This dataset contains the structural models for the primary transcripts of the Sphagnum divinum proteome. Additionally, for a subset of these proteins, sequence and structural alignment results are provided. This dataset represents the most thorough structural study of a Sphagnum species, also known as peat mosses, by providing three-dimensional atomic resolution structures of the majority of the encoded proteins as well as structural alignment results used in the application of annotating the proteome. References (DOI) AlphaFold v2 Monomer: https://doi.org/10.1038/s41586-021-03819-2. References (DOI) US-align2: https://doi.org/10.1038/s41592-022-01585-1

59 BASIC BIOLOGICAL SCIENCES↗