Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Rapid variability of 10-140 keV X-rays from Cygnus X-1

On five occasions in 1977 and 1978, Cygnus X-1 was observed using the low-energy detectors of the UCSD/MIT Hard X-ray and Low-Energy Gamma Ray experiment on the HEAO 1 satellite. Rapid (times between 0.08 and 1000 sec) variability was found in the 10-140 keV band. The power spectrum was white for frequencies between 0.001 and 0.05 Hz and was proportional to the inverse of the frequency for frequencies between 0.05 and 3 Hz, indicating correlations on all time scales less than approximately 20 s. The shape of the energy spectrum was correlated with intensity; it was harder at higher intensity. If the emission is produced by Comptonization of a soft photon flux in a hot cloud, the heating of the cloud cannot be constant; it must vary on time scales up to approximately 20 s. A variable accretion rate could cause the observed effects.

Nolan, P. L.↗

Image Moment-Based Extended Object Tracking for Complex Motions

A novel image moment-based model for shape estimation and tracking of an extended target moving with a complex trajectory is presented. The proposed extended object tracking algorithm is based on multiple noisy measurement points sampled from the target at each time step. The shape of the object, approximated by an ellipse, is estimated using a combination of image moments. Dynamic models of image moments for constant velocity and coordinated turn motions are mathematically derived. An unscented Kalman filter - interacting multiple model (UKF-IMM) method is used to track the object and estimate its shape. A likelihood function based on average log-likelihood is derived for the IMM filter. Simulation results of the proposed UKF-IMM algorithm with the image momentbased models are presented that show the estimation of the shape of the object moving in a complex trajectory. The intersection over union (IoU), and the root mean square errors (RMSEs) of the position and velocity of the centroid of the ellipse are used as metrics. The comparison results of the proposed algorithm with a benchmark algorithm from literature based on the IoU and RMSE metrics are presented.

Extended object tracking↗

Gasdynamic modeling of the Venus magnetotail

A gasdynamic, convected magnetic field model of the solar wind interaction with Venus is used to model the steady state Venus magnetotail. The flow obstacle surface is approximated as a tangential discontinuity. An initial obstacle shape is defined by balancing a hydrostatic equilibrium approximation for the internal plasma pressure with an external flow pressure approximation. These approximations produce a cylindrical obstacle in the distant tail. A refined obstacle shape that attempts to balance this internal pressure with the calculated external flow pressure tapers inward toward the tail axis downstream of the terminator. The bulk plasma flow and magnetic field properties compare well with experimental observations. The model predicts central magnetotail oxygen plasma number densities of about 0.2/cu cm and temperatures on the order of 10 to the 6th K flowing tailward at speeds as low as 200 m/s.

Moore, K. R.↗

High internal inductance for steady-state operation in ITER and a reactor

Increased confinement and ideal stability limits at relatively high values of the internal inductance (ℓ i ) have enabled an attractive scenario for steady-state tokamak operation to be demonstrated in DIII-D. We achieved normalized plasma pressure in the range appropriate for a reactor in high elongation and triangularity double-null divertor discharges with beta(N) approximate to 5 at ℓ i approximate to 1.3, near the ideal n = 1 kink stability limit calculated without the effect of a stabilizing vacuum vessel wall, with the ideal-wall limit still higher at β N > 5.5. Moreover, confinement is above the H-mode level with H 98(y,H- 2) approximate to 1.8. At q 95 approximate to 7.5, the current is overdriven, with bootstrap current fraction f BS approximate to 0.8, noninductive current fraction f NI > 1 and negative surface voltage. For ITER (which has a single-null divertor shape), operation at ℓ i approximate to 1 is a promising option with f BS approximate to 0.5 and the remaining current driven externally near the axis where the electron cyclotron current drive efficiency is high. This scenario has been tested in the ITER shape in DIII-D at q 95 = 4.8, so far reaching f NI = 0.7 and f BS = 0.4 at beta N approximate to 3.5 with performance appropriate for the ITER Q=5 mission, H 89 beta N /q 2 95 approximate to 0.3. Finally, modeling studies explored how increased current drive power for DIII-D could be applied to maintain a stationary, fully noninductive high ℓ i discharge. Stable solutions in the double-null shape are found without the vacuum vessel wall at beta N = 4, ℓ i = 1.07 and f BS = 0.5, and at beta N = 5 with the vacuum vessel wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parametrically driven nonlinear Dirac equation with arbitrary nonlinearity

Here, the damped and parametrically driven nonlinear Dirac equation with arbitrary nonlinearity parameter $\kappa$ is analyzed, when the external force is periodic in space and given by $\mathcal{f(x) = r}$ cos(Kx), both numerically and in a variational approximation using five collective coordinates (time dependent shape parameters of the wave function). Our variational approximation satisfies exactly the low-order moment equations. Because of competition between the spatial period of the external force λ = 2π/K , and the soliton width $l_s$, which is a function of the nonlinearity $\kappa$ as well as the initial frequency ω 0 of the solitary wave, there is a transition (at fixed ω 0 ) from trapped to unbound behavior of the soliton, which depends on the parameters $\mathcal{r}$ and K of the external force and the nonlinearity parameter $\kappa$. We previously studied this phenomena when $\kappa$ = 1 where we showed that for λ $\gg l_s$ the soliton oscillates in an effective potential, while forλ $\ll l_s$ it moves uniformly as a free particle. In this paper we focus on the $\kappa$ dependence of the transition from oscillatory to particle behavior and explicitly compare the curves of the transition regime found in the collective coordinate approximation as a function of $\mathcal{r}$ and K when $\kappa$ = 1/2,1,2 at fixed value of the frequency ω 0 . Since the solitary wave gets narrower for fixed ω 0 as a function of $\kappa$, we expect and indeed find that the regime where the solitary wave is trapped is extended as we increase $\kappa$.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Instantaneous-shape sampling for calculation of the electromagnetic dipole strength in transitional nuclei

Electromagnetic dipole absorption cross sections of transitional nuclei with large-amplitude shape fluctuations are calculated in a microscopic way by introducing the concept of instantaneous-shape sampling, which is based on slow shape dynamics as compared with fast dipole vibrations. The dipole strength is calculated by means of the quasiparticle random-phase approximation (QRPA) for the instantaneous shapes, the probability of which is obtained by means of the interacting boson approximation. The calculations agree well with the experimental photoabsorption cross sections near the nucleon emission threshold, but they underestimate it at low energies. The cumulative cross sections for the region below the threshold are a factor of 2 too low.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comet West: A view from the HELIOS zodiacal light photometers

Comet West passed through perihelion on February 25, 1976. The comet crossed the HELIOS A and B spacecraft zodiacal light photometer fields of view as the spacecraft orbited the Sun, allowing them to record the brightness, polarization, and color of the comet and its surrounding interplanetary medium. Data from the U, B, and V photometers across the tail shows a distinct bluing followed by a slight reddening corresponding to the ion and dust tails, respectively, entering the field of view. The non-Earth perspective of the HELIOS photometers allows a comparison of the tail with Earth observations at the same time. Precise location of the nucleus and tail allow the photometer data to be searched for evidence of the comet bow shock and orbital dust. A brightness bump present in the data before the comet reaches some photometer positions, can be shown to approximately form a parabolic shape Sunward and ahead of the orbital motion of the Comet West nucleus. If this is the comet bow shock or bow compression, then it corresponds to a density enhancement of the ambient medium by 1.5 to 2 times in the vicinity of the comet. The distance of the brightness increase from the nucleus by comparison with Comet Halley implies a neutral gas production rate of approximately 3 times that of Halley.

Benensohn, R. M.↗

Response Surface Methods For Spatially-Resolved Optical Measurement Techniques

Response surface methods (or methodology), RSM, have been applied to improve data quality for two vastly different spatially-resolved optical measurement techniques. In the first application, modern design of experiments (MDOE) methods, including RSM, are employed to map the temperature field in a direct-connect supersonic combustion test facility at NASA Langley Research Center. The laser-based measurement technique known as coherent anti-Stokes Raman spectroscopy (CARS) is used to measure temperature at various locations in the combustor. RSM is then used to develop temperature maps of the flow. Even though the temperature fluctuations at a single point in the flowfield have a standard deviation on the order of 300 K, RSM provides analytic fits to the data having 95% confidence interval half width uncertainties in the fit as low as +/- 30 K. Methods of optimizing future CARS experiments are explored. The second application of RSM is to quantify the shape of a 5-meter diameter, ultra-lightweight, inflatable space antenna at NASA Langley Research Center. Photogrammetry is used to simultaneously measure the shape of the antenna at approximately 500 discrete spatial locations. RSM allows an analytic model to be developed that describes the shape of the majority of the antenna with an uncertainty of 0.4 mm, with 95% confidence. This model would allow a quantitative comparison between the actual shape of the antenna and the original design shape. Accurately determining this shape also allows confident interpolation between the measured points. Such a model could, for example, be used for ray tracing of radio-frequency waves up to 95 GHz. to predict the performance of the antenna.

Danehy, P. M.↗

The effect of measurement errors and computational approximations on a perspective ILM radar image

The effect was examined of aircraft position and attitude, of measurement errors, and of computational approximations on the size, shape, and position of a perspective radar image of an airport runway as might be displayed by an independent landing monitor in transport aircraft. The effect on runway image geometry was examined for different aircraft attitudes and different aircraft positions relative to a standard three degree glide slope. Measurement errors investigated were errors in radar azimuth angle and range, and errors in those aircraft parameters supplied to the radar for use in converting the radar image into a perspective format (namely pitch, roll, and altitude). Also investigated were the effects of using certain mathematical approximations, such as small angle, in the coordinate transformation which converts the image to a perspective format.

Bundick, W. T.↗

Low-Gain Circularly Polarized Antenna with Torus-Shaped Pattern

The Juno mission to Jupiter requires an antenna with a torus-shaped antenna pattern with approximately 6 dBic gain and circular polarization over the Deep Space Network (DSN) 7-GHz transmit frequency and the 8-GHz receive frequency. Given the large distances that accumulate en-route to Jupiter and the limited power afforded by the solar-powered vehicle, this toroidal low-gain antenna requires as much gain as possible while maintaining a beam width that could facilitate a +/-10deg edge of coverage. The natural antenna that produces a toroidal antenna pattern is the dipole, but the limited approx. = 2.2 dB peak gain would be insufficient. Here a shaped variation of the standard bicone antenna is proposed that could achieve the required gains and bandwidths while maintaining a size that was not excessive. The final geometry that was settled on consisted of a corrugated, shaped bicone, which is fed by a WR112 waveguide-to-coaxial- waveguide transition. This toroidal low-gain antenna (TLGA) geometry produced the requisite gain, moderate sidelobes, and the torus-shaped antenna pattern while maintaining a very good match over the entire required frequency range. Its "horn" geometry is also low-loss and capable of handling higher powers with large margins against multipactor breakdown. The final requirement for the antenna was to link with the DSN with circular polarization. A four-layer meander-line array polarizer was implemented; an approach that was fairly well suited to the TLGA geometry. The principal development of this work was to adapt the standard linear bicone such that its aperture could be increased in order to increase the available gain of the antenna. As one increases the aperture of a standard bicone, the phase variation across the aperture begins to increase, so the larger the aperture becomes, the greater the phase variation. In order to maximize the gain from any aperture antenna, the phase should be kept as uniform as possible. Thus, as the standard bicone fs aperture increases, the gain increase becomes less until one reaches a point of diminishing returns. In order to overcome this problem, a shaped aperture is used. Rather than the standard linear bicone, a parabolic bicone was found to reduce the amount of phase variation as the aperture increases. In fact, the phase variation is half of the standard linear bicone, which leads to higher gain with smaller aperture sizes. The antenna pattern radiated from this parabolic-shaped bicone antenna has fairly high side lobes. The Juno project requested that these sidelobes be minimized. This was accomplished by adding corrugations to the parabolic shape. This corrugated-shaped bicone antenna had reasonably low sidelobes, and the appropriate gain and beamwidth to meet project requirements.

Amaro, Luis R.↗

The reliability of X-ray constraints of intrinsic cluster shapes

Using the simulation of Katz & White (1993) we have tested the viability of X-ray analysis for constraining the intrinsic shapes of clusters of galaxies considering the effects of both substructure and steep temperature gradients. We restrict our analysis to the aggregate shapes of clusters on scales of r approximately 1-2 Mpc in order to reduce our sensitivity to subclustering in the core. For low redshifts (z less than or approximately = 0.25) the X-ray method accurately measures the true ellipticity of the three-dimensional cluster dark matter provided the inclination of the cluster is known to within approximately 30 deg; assuming the gas is isothermal adds only small errors to the derived shapes. At higher redshifts the X-ray method yields unreliable results since the gas does not trace the cluster gravitational potential. We proffer some necessary conditions for the reliability of X-ray methods characterized by both the amount of substructure in the X-ray surface brightness images and the shapes of the isophotes. We conclude that measurements of the aggregate shapes of clusters on scales r approximately 1-2 Mpc are insensitive to core substructure representing scales of a few hundred kpc. Therefore our results suggest that the X-ray measurements of aggregate cluster shapes by Fabricant, Rybicki, & Gorenstein (1984) and Buote & Canizares (1992) are valid provided that they do not suffer from serious projection effects. A substantial number of Abell clusters observed with the ROSAT PSPC will be amenable to X-ray shape analysis.

Buote, David A.↗

Quantitative measurements of vaporization, burst ionization, and emission characteristics of shaped charge barium releases

Intensity-calibrated color video recordings of three barium-shaped charge injections in the ionopshere were used to determine the initial ionization, the column density corresponding to unity optical depth, and the yield of vaporized barium in the fast jet. It was found that the initial ionization at the burst was less than 1% and that 0% burst ionization was consistent with the observations. Owing to the Doppler shift, the column density for optical thickness in the neutral barium varies somewhat according to the velocity distribution. For the cases examined here, the column density was 2-5 x 10(exp 10) atoms/sq cm. This value, which occurred 12 to 15 s after release, should be approximately valid for most shaped charge experiments. The yield was near 30% (15% in the fast jet) for two of the releases and was somewhat lower in the third, which also had a lower peak velocity. This study also demonstrated the applicability of the computer simulation code developed for chemical releases by Stenbaek-Nielsen and provided experimental verification of the Doppler-corrected emission rates calculated b Stenbaek-Nielsen (1989).

Hoch, Edward L.↗

DETERMINING THE MAGNETIZATION OF THE QUIET SUN PHOTOSPHERE FROM THE HANLE EFFECT AND SURFACE DYNAMO SIMULATIONS

The bulk of the quiet solar photosphere is thought to be significantly magnetized, due to the ubiquitous presence of a tangled magnetic field at subresolution scales with an average strength (B) {approx} 100 G. This conclusion was reached through detailed three-dimensional (3D) radiative transfer modeling of the Hanle effect in the Sr I 4607 A line, using the microturbulent field approximation and assuming that the shape of the probability density function of the magnetic field strength is exponential. Here, we relax both approximations by modeling the observed scattering polarization in terms of the Hanle effect produced by the magnetic field of a 3D photospheric model resulting from a (state-of-the-art) magneto-convection simulation with surface dynamo action. We show that the scattering polarization amplitudes observed in the Sr I 4607 A line can be explained only after enhancing the magnetic strength of the photospheric model by a sizable scaling factor, F {approx} 10, which implies (B) {approx} 130 G in the upper photosphere. We also argue that in order to explain both the Hanle depolarization of the Sr I 4607 A line and the Zeeman signals observed in Fe I lines, we need to introduce a height-dependent scaling factor, such that the ensuing (B) {approx} 160 G in the low photosphere and (B) {approx} 130 G in the upper photosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Application of the diagnostic radiological index of protection to protective garments

Purpose: Previously, the diagnostic radiological index of protection (DRIP) was proposed as a metric for quantifying the protective value of radioprotective garments. The DRIP is a weighted sum of the percent transmissions of different radiation beams through a garment. Ideally, the beams would represent the anticipated stray radiation encountered during clinical use. However, it is impractical to expect a medical physicist to possess the equipment necessary to accurately measure transmission of scattered radiation. Therefore, as a proof of concept, the authors tested a method that applied the DRIP to clinical practice. Methods: Primary beam qualities used in interventional cardiology and radiology were observed and catalogued. Based on the observed range of beam qualities, five representative clinical primary beam qualities, specified by kV and added filtration, were selected for this evaluation. Monte Carlo simulations were performed using these primary beams as source definitions to generate scattered spectra from the clinical primary beams. Using numerical optimization, ideal scatter mimicking primary beams, specified by kV and added aluminum filtration, were matched to the scattered spectra according to half- and quarter-value layers and spectral shape. To within reasonable approximation, these theoretical scatter-mimicking primary beams were reproduced experimentally in laboratory x ray beams and used to measure transmission through pure lead and protective garments. For this proof of concept, the DRIP for pure lead and the garments was calculated by assigning equal weighting to percent transmission measurements for each of the five beams. Finally, the areal density of lead and garments was measured for consideration alongside the DRIP to assess the protective value of each material for a given weight. Results: The authors identified ideal scatter mimicking primary beams that matched scattered spectra to within 0.01 mm for half- and quarter-value layers in copper and within 5% for the shape function. The corresponding experimental scatter-mimicking primary beams matched the Monte Carlo generated scattered spectra with maximum deviations of 6.8% and 6.6% for half- and quarter-value layers. The measured DRIP for 0.50 mm lead sheet was 2.0, indicating that it transmitted, on average, 2% of incident radiation. The measured DRIP for a lead garment and one lead-alternative garment closely matched that for pure lead of 0.50 mm thickness. The DRIP for other garments was substantially higher than 0.50 mm lead (3.9–5.4), indicating they transmitted about twice as much radiation. When the DRIP was plotted versus areal density, it was clear that, of the garments tested, none were better than lead on a weight-by-weight basis. Conclusions: A method for measuring the DRIP for protective garments using scatter-mimicking primary beams was developed. There was little discernable advantage in protective value per unit weight for lead-alternative versus lead-only garments. Careful consideration must be given to the balance of protection and weight when choosing a lead-alternative protective garment with a lower specified “lead equivalence,” e.g., 0.35 mm. The DRIP has the potential to resolve this dilemma. Reporting the DRIP relative to areal density is an ideal metric for objective comparisons of protective garment performance, considering both protective value in terms of transmission of radiation and garment weight.

60 APPLIED LIFE SCIENCES↗

A Meshfree Cell-based Smoothed Point Interpolation Method for Solid Mechanics Problems

In the framework of a weakened weak (W{sup 2}) formulation using a generalized gradient smoothing operation, this paper introduces a novel meshfree cell-based smoothed point interpolation method (CS-PIM) for solid mechanics problems. The W{sup 2} formulation seeks solutions from a normed G space which includes both continuous and discontinuous functions and allows the use of much more types of methods to create shape functions for numerical methods. When PIM shape functions are used, the functions constructed are in general not continuous over the entire problem domain and hence are not compatible. Such an interpolation is not in a traditional H{sup 1} space, but in a G{sup 1} space. By introducing the generalized gradient smoothing operation properly, the requirement on function is now further weakened upon the already weakened requirement for functions in a H{sup 1} space and G{sup 1} space can be viewed as a space of functions with weakened weak (W{sup 2}) requirement on continuity. The cell-based smoothed point interpolation method (CS-PIM) is formulated based on the W{sup 2} formulation, in which displacement field is approximated using the PIM shape functions, which possess the Kronecker delta property facilitating the enforcement of essential boundary conditions [3]. The gradient (strain) field is constructed by the generalized gradient smoothing operation within the cell-based smoothing domains, which are exactly the triangular background cells. A W{sup 2} formulation of generalized smoothed Galerkin (GS-Galerkin) weak form is used to derive the discretized system equations. It was found that the CS-PIM possesses the following attractive properties: (1) It is very easy to implement and works well with the simplest linear triangular mesh without introducing additional degrees of freedom; (2) it is at least linearly conforming; (3) this method is temporally stable and works well for dynamic analysis; (4) it possesses a close-to-exact stiffness, which is much softer than the overly-stiff FEM model and much stiffer than the overly-soft node-based smoothed point interpolation method (NS-PIM); (5) the results of the present method are of better accuracy and higher convergence rate than the linear FEM model using the same set of triangular meshes.

97 MATHEMATICS AND COMPUTING↗

Planar blast scaling with condensed-phase explosives in a shock tube

Blast waves are strong shock waves that result from large power density deposition into a fluid. The rapid energy release of high-explosive (HE) detonation provides sufficiently high power density for blast wave generation. Often it is desirable to quantify the energy released by such an event and to determine that energy relative to other reference explosives to derive an explosive-equivalence value. In this study, we use condensed-phase explosives to drive a blast wave in a shock tube. The explosive material and quantity were varied to produce blast waves of differing strengths. Pressure transducers at varying lengths measured the post-shock pressure, shock-wave arrival time and sidewall impulse associated with each test. Blast-scaling concepts in a one-dimensional geometry were then used to both determine the energy release associated with each test and to verify the scaling of the shock position versus time, overpressure versus distance, and impulse. Most blast scaling measurements to-date have been performed in a three-dimensional geometry such as a blast arena. Testing in a three-dimensional geometry can be challenging, however, as spherical shock-wave symmetry is required for good measurements. Additionally, the spherical wave strength decays rapidly with distance and it can be necessary to utilize larger (several kg) quantities of explosive to prevent significant decay from occurring before an idealized blast wave has formed. Such a mode of testing can be expensive, require large quantities of explosive, and be limited by both atmospheric conditions (such as rain) and by noise complaints from the population density near the test arena. Testing is possible in more compact geometries, however. Non-planar blast waves can be formed into a quasi-planar shape by confining the shock diffraction with the walls of a shock tube. Regardless of the initial form, the wave shape will begin to approximate a planar front after successive wave reflections from the tube walls. Such a technique has previously been used to obtain blast scaling measurements in the planar geometry with gaseous explosives and the condensed-phase explosive nitroguanidine. Recently, there has been much interest in the blast characterization of various non-ideal high explosive (NIHE) materials. With non-ideals, the detonation reaction zone is significantly larger (up to several cm for ANFO) than more ideal explosives. Wave curvature, induced by charge-geometry, can significantly affect the energy release associated with NIHEs. To measure maximum NIHE energy release accurately, it is desirable to minimize any such curvature and, if possible, to overdrive the detonation shock to ensure completion of chemical reactions ahead of the sonic locus associated with the reaction zone. This is achieved in the current study through use of a powerful booster HE and a charge geometry consisting of short cylindrical lengths of NIHE initiated along the charge centerline.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Axisymmetric shapes and stability of charged drops in an external electric field

A highly conducting charged drop that is surrounded by a fluid insulator of another density can be levitated by suitably applying a uniform electric field. Axisymmetric equilibrium shapes and stability of the levitated drop are found by solving simultaneously the augmented Young-Laplace equation for surface shape and the Laplace equation for the elecric field, together with constraints of fixed drop volume, charge, and center of mass. The means are a method of subdomains, finite element basis functions, and Galerkin's method of weighted residuals, all facilitated by a large-scale computer. Shape families of fixed charge are treated systematically by first-order continuation. Previous analyses by Abbas et al. in 1967 and Abbas and Latham in 1969, in which the shapes of levitated drops are approximated as spheroids, are corrected. The new analysis shows that drops charged to less than the Rayleigh limit lose shape stability at turning points, with respect to external field strength, and that the instability seen in experiments of Doyle et al. in 1964 and others is not a bifurcation to a family of two-lobed shapes, but rather is a related imperfect bifurcation.

Basaran, O. A.↗

Development of the self-consistent approximation and its application to the problem of magnetoelastic resonance in an inhomogeneous medium

Our previously proposed approximation involving both the first and second terms of the expansion of the vertex function is generalized to the system of two interacting wavefields of different physical nature. A system of self-consistent equations for the matrix Green’s function and matrix vertex function is derived. On the basis of this matrix generalization of the new self-consistent approximation, a theory of magnetoelastic resonance is developed for a ferromagnetic model, where the magnetoelastic coupling parameter ε(x) is inhomogeneous. Equations for magnetoelastic resonance are analyzed for one-dimensional inhomogeneities of the coupling parameter. The diagonal and off-diagonal elements of the matrix Green’s function of the system of coupled spin and elastic waves are calculated with the change in the ratio between the average value ε and rms fluctuation Δε of the coupling parameter between waves from the homogeneous case (ε ≠ 0, Δε = 0) to the extremely randomized case (ε = 0, Δε ≠ 0) at various correlation wavenumbers of inhomogeneities k{sub c}. For the limiting case of infinite correlation radius (k{sub c} = 0), in addition to approximate expressions, exact analytical expressions corresponding to the summation of all diagrams of elements of the matrix Green’s function are obtained. The results calculated for an arbitrary k{sub c} value in the new self-consistent approximation are compared to the results obtained in the standard self-consistent approximation, where only the first term of the expansion of the vertex function is taken into account. It is shown that the new approximation corrects disadvantages of the Green’s functions calculated in the standard approximation such as the dome shape of resonances and bends on the sides of resonance peaks. The appearance of a fine structure of the spectrum in the form of a narrow resonance on the Green’s function of spin waves and a narrow antiresonance on the Green’s function of elastic waves, which was previously predicted in the standard self-consistent approximation, is confirmed. With an increase in the parameter k{sub c}, the Green’s functions calculated in the standard and new approximations approach each other and almost coincide with each other at k{sub c}/k ≥ 0.5. At the same time, the results of this work indicate that the new self-consistent approximation has a certain advantage for studying the problems of stochastic radiophysics in media with long-wavelength inhomogeneities (small k{sub c} values), because it describes both the shape and width of peaks much better than the standard approximation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗