Search NASA⌕ Search

SEARCH · Search NASA

Results for “shock wave and boundary layer interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Experimental and numerical investigation of the effect of distributed suction on oblique shock wave/turbulent boundary layer interaction

A combined experimental and numerical study of the interaction of an incident oblique shock wave with a turbulent boundary layer on a rough plate and on a porous plate with suction is presented. The experimental phase involved the acquisition of mean data upstream of, within, and downstream of the interaction region at Mach numbers 2.5 and 3.0. Data were taken at unit Reynolds numbers of 1.66 E7 and 1.85 E7 m respectively, and for flow deflection angles of 0, 4, 6 and 8 degs. Measured data include wall static pressure, pitot pressure profiles, and local bleed distributions on the porous plate. On the rough plate, with no suction, the boundary layer profiles were modified near the wall, but not separated for the 4 deg flow deflection angle. For the higher deflection angles of 6 and 8 degs, the boundary layer was separated. Suction increases the strength of the incident shock required to separate the turbulent boundary layer; for all shock strengths tested, separation is completely eliminated. The pitot pressure profiles are affected throughout the whole boundary layer; they are fuller than the ones obtained on the rough plate. It is also found that the combination of suction and roughness introduces spatial perturbations.

Benhachmi, Driss↗
NASA NTRS1989

CFD analysis for high speed inlets

The increased national interest in high speed flight has increased research for high speed propulsion components. The highly 3-D flows present in supersonic/hypersonic inlets are currently being studied at NASA-Lewis both experimentally and computationally using a family of steady Parabolized Navier-Stokes (PNS) and Navier-Stokes (NS) solvers and unsteady NS solvers. Some of the results of these efforts are presented with an emphasis on the comparison of the computational and experimental results. The flow in high speed inlets typically involves the interaction of compression shock waves and boundary layers on the internal surfaces. The fundamentals of these interactions have been studied experimentally for many years, while more recently, computations have been used to study these complex 3-D flow fields. Attempts to control the flow through boundary layer bleed are being investigated computationally prior to wind tunnel experiments. The ultimate goal is the higher performing inlets required for high speed flight.

Benson, Tom↗
NASA NTRS1993

Time-sequenced and spectrally filtered Rayleigh imaging of shock wave and boundary layer structure for inlet characterization

Multiple pulsed Rayleigh imaging and filtered Rayleigh scattering are used to generate images of a complex boundary layer structure, shock wave/boundary layer interactions, and crossing shock waves. Time-sequenced Rayleigh images taken with a visible, double-pulsed laser system show the evolution of boundary layer structure of the internal flow in a generic cross-shock inlet. The images taken in the inlet give insight into 3D effects caused by the inlet geometry and may be used for modeling the complex flows.

Forkey, Joseph↗
NASA NTRS1976

Investigation of shock-induced separation of a turbulent boundary layer using laser velocimetry

Boundary-layer measurements realized by laser velocimetry are presented for a Mach 2.9, two-dimensional, shock-wave/turbulent boundary-layer interaction containing an extensive region of separated flow. Mean velocity and turbulent intensity profiles were obtained from upstream of the interaction zone to downstream of the mean reattachment point. The superiority of the laser velocimeter technique over pressure sensors in turbulent separated flows is demonstrated by a comparison of the laser velocimeter data with results obtained from local pitot and static pressure measurements for the same flow conditions. The locations of the mean separation and reattachment points as deduced from the mean velocity measurements are compared to oil-flow visualization results. Representative, velocity probability density functions obtained in the separated flow region are also presented. Critical to the success of this investigation were: (1) the use of Bragg cell frequency shifting and (2) artificial seeding of the flow with submicron light-scattering particles.

Modarress, D.↗
NASA NTRS1980

Unsteady aerodynamics of conventional and supercritical airfoils

The unsteady aerodynamics of a conventional and a supercritical airfoil are compared by examining measured chordwise unsteady pressure time-histories from four selected flow conditions. Although an oscillating supercritical airfoil excites more harmonics, the strength of the airfoil's shock wave is the more important parameter governing the complexity of the unsteady flow. Whether they are conventional or supercritical, airfoils that support weak shock waves induce unsteady loads that are qualitatively predictable with classical theories; flows with strong shock waves are sensitive to details of the shock-wave and boundary-layer interaction and cannot be adequately predicted.

Davis, S. S.↗
NASA NTRS1983

A time-split finite-volume algorithm for three-dimensional flow-field simulation

A general finite-volume algorithm is developed for solving three-dimensional, time-dependent, compressible Navier-Stokes equations for high Reynolds number flows over an arbitrary geometry. This algorithm adapts MacCormack's (1982) explicit-implicit scheme to a time-split, three-dimensional finite-volume concept in a general coordinate system. It is shown that the thin-layer approximation in all three spatial directions significantly reduces the evaluation of viscous terms and allows the algorithm to solve more complicated geometries with all boundaries in two or all three directions. The calculated results using this method are found to be in good agreement with the experimental measurements of a blunt-fin induced shock wave and boundary-layer interaction problems. Observations of the existence of peak pressure, primary horseshoe and secondary vortices, and reversed supersonic zones show that computational fluid dynamics can effectively supplement the wind tunnel tests for aerodynamic design as well as for understanding basic fluid dynamics.

Hung, C. M.↗
NASA NTRS1987

Supersonic turbulent flow past a 3-D swept compression corner at Mach 3

Experimental and theoretical studies are presented on the three-dimensional shock wave-turbulent boundary layer interaction generated by a swept compression corner at Mach 3 for compression angle of 24 deg, sweep angle of 60 deg, and Reynolds numbers from 140,000 to 900,000. Two theoretical approaches were used, both of which utilize the full mass-averaged compressible three-dimensional Navier-Stokes equations but differ in the choice of turbulence model (the Baldwin-Lomax, 1978, and the Jones-Launder, 1972, model, respectively). The features of the computed mean flow structure were found to be qualitatively the same for both the Baldwin-Lomax and Jones-Launder models.

Knight, Doyle D.↗
NASA NTRS1988

Supersonic turbulent flow past a swept compression corner at Mach 3. II

The three-dimensional Mach 3.0 shock wave-turbulent boundary layer interaction generated by a swept compression corner whose geometry is characterized by the angle of streamwise compression angle alpha and the angle of sweep lambda is presently treated by the Baldwin-Lomax (1978) algebraic turbulent eddy viscosity model. The results obtained, and those previously derived by means of Cebeci and Smith (1974) and Jones and Launder (1972) models, are compared with experimental measurements. The rate of change of the mean kinetic energy along a streamline is investigated, and evidence is obtained that the flowfield structure is rotational and inviscid.

Knight, Doyle D.↗
NASA NTRS1990

Numerical investigations in three-dimensional internal flows

The application of the SCRAM2D code to investigating the flow fields that might be expected to occur in a representative Mach 10, two dimensional (ramp-compression) inlet is described. This Mach number allows the use of existing Navier-Stokes codes without the additional complexity of air chemistry and the associated large increases in computational time required to achieve numerical simulations of such flow fields. The CFD simulation consists of a two-dimensional inlet geometry that has an overall geometric turning of 36 degrees. The cowl for this inlet is assumed to be aligned with the oncoming freestream flow, turning the ramp flow field back parallel to the freestream, thus producing the overall 36 degree turning angle. The primary subject is the cowl shock wave-ramp boundary layer interaction effects. The results of numerical simulations carried out at the design Mach number of 10 and two other off-design Mach numbers, 7.2 and 5.0 are described.

Rose, William C.↗
NASA NTRS1979

Investigation of Turbulent Boundary-Layer Separation Using Laser Velocimetry

Boundary-layer measurements realized by laser velocimetry are presented for a Much 2.9, two-dimensional, shock-wave/turbulent boundary-layer interaction containing an extensive region of separated flow. Mean velocity and turbulent intensity profiles were obtained from upstream of the interaction zone to downstream of the mean reattachment point. The superiority of the laser velocimeter technique over pressure sensors in turbulent separated flows is demonstrated by a comparison of the laser velocimeter data with results obtained from local pilot and static pressure measurements for the same flow conditions. The locations of the mean separation and reattachment points as deduced from the mean velocity measurements are compared to oil-now visualization results. Representative velocity probability density functions obtained in the separated now region are also presented. Critical to the success of this investigation were: the use of Bragg cell frequency shifting and artificial seeding of the now with submicron light-scattering particles.

Modarress, D.↗
NASA NTRS2010

Computational Fluid Dynamics (CFD) Simulation of Hypersonic Turbine-Based Combined-Cycle (TBCC) Inlet Mode Transition

Methods of computational fluid dynamics were applied to simulate the aerodynamics within the turbine flowpath of a turbine-based combined-cycle propulsion system during inlet mode transition at Mach 4. Inlet mode transition involved the rotation of a splitter cowl to close the turbine flowpath to allow the full operation of a parallel dual-mode ramjet/scramjet flowpath. Steady-state simulations were performed at splitter cowl positions of 0deg, -2deg, -4deg, and -5.7deg, at which the turbine flowpath was closed half way. The simulations satisfied one objective of providing a greater understanding of the flow during inlet mode transition. Comparisons of the simulation results with wind-tunnel test data addressed another objective of assessing the applicability of the simulation methods for simulating inlet mode transition. The simulations showed that inlet mode transition could occur in a stable manner and that accurate modeling of the interactions among the shock waves, boundary layers, and porous bleed regions was critical for evaluating the inlet static and total pressures, bleed flow rates, and bleed plenum pressures. The simulations compared well with some of the wind-tunnel data, but uncertainties in both the windtunnel data and simulations prevented a formal evaluation of the accuracy of the simulation methods.

Slater, John W.↗
NASA NTRS1992

Two-equation turbulence modeling for 3-D hypersonic flows

An investigation to verify, incorporate and develop two-equation turbulence models for three-dimensional high speed flows is presented. The current design effort of hypersonic vehicles has led to an intensive study of turbulence models for compressible hypersonic flows. This research complements an extensive review of experimental data and the current development of 2D turbulence models. The review of experimental data on 2D and 3D flows includes complex hypersonic flows with pressure profiles, skin friction, wall heat transfer, and turbulence statistics data. In a parallel effort, turbulence models for high speed flows have been tested against flat plate boundary layers, and are being tested against the 2D database. In the present paper, we present the results of 3D Navier-Stokes numerical simulations with an improved k-omega two-equation turbulence model against experimental data and empirical correlations of an adiabatic flat plate boundary layer, a cold wall flat plate boundary layer, and a 3D database flow, the interaction of an oblique shock wave and a thick turbulent boundary layer with a free stream Mach number = 8.18 and Reynolds number = 5 x 10 to the 6th.

Bardina, J. E.↗
NASA NTRS2019

Investigation of Transitional Shock-Wave/Boundary Layer Interactions Using Direct Numerical Simulations

Interaction of a transitional boundary layer with a normal-shock is investigated using unstructured tetrahedral meshes under the numerical framework of the space-time conservation element, solution element (CESE) method. The computations mimic recent experimental efforts at the University of Tennessee Space Institute, where a Mach 2.0 flow interacts with a tall cylinder attached to a flat plate. The location of the cylinder with respect to the flat plate leading edge determines if the incoming boundary layer is laminar, transitional or fully turbulent. Four representative flow conditions exemplifying laminar and transitional boundary layers are analyzed by direct numerical simulations. Similar to what was observed in the experiments for the case of transitional interaction, the computations reveal an intermittent upstream influence (UI) shock that repeatedly travels upstream from the lambda-foot toward the leading edge before vanishing. Through detailed unsteady flow analysis obtained using Fourier analysis and dynamic mode decomposition techniques, the presence of disturbances with similar frequencies as those measured in experiments were identified in the flow along with locations that appear to influence the dynamics of the flow.

Venkatachari, Balaji Shankar↗
NASA NTRS1993

Time-dependent simulation of reflected-shock/boundary layer interaction

An initial numerical/experimental investigation has been done to better understand multi-dimensional flow phenomena inside pulse facilities. Time-dependent quasi-one-dimensional and axisymmetric numerical simulations of complete shock tube flow are compared with experimental pressure traces recorded at the NASA Ames electric-arc driven shock tube facility (from cold driver shots). Of particular interest is the interaction between the reflected shock wave and the boundary layer. Evidence of the shock bifurcation caused by this interaction is clearly seen in the present experimental data. The axisymmetric simulations reproduce this phenomenon and demonstrate how this interaction can provide a mechanism for driver gas to contaminate the stagnation region. The simulations incorporate finite-rate chemistry, a moving mesh and laminar viscosity.

Wilson, Gregory J.↗
NASA NTRS1988

Skin friction measurements by laser interferometry in swept shock wave/turbulent boundary-layer interactions

The laser interferometric skin friction meter was used to measure wall shear stress distributions in two interactions of fin-generated swept shock waves with turbulent boundary layers. The basic research configuration was an unswept sharp-leading-edge fin of variable angle mounted on a flatplate. The results indicate that such measurements are practical in high-speed interacting flows, and that a repeatability of + or - 6 percent or better is possible. Marked increases in wall shear were observed in both swept interactions tested.

Kim, Kwang-Soo↗
NASA NTRSDate not supplied

Cross-Measurement Comparisons for a CFD Validation Dataset on Mach 2.5 Axisymmetric Turbulent Shock-Wave/Boundary-Layer Interactions

Experimental data for a shock-wave/boundary-layer interaction has been collected using multiple measurement techniques. Unfortunately, diversity of methods for acquisition begets an aggregation of data which does not directly quantify the same properties of the flowfield. The objective in this paper was to (a) present the collection of flowfield measurements in one venue in a format more usable for those validating CFD models against the data, (b) evaluate the degree to which the experimental data support each other, and (c) highlight the differences and relative advantages/shortcomings of each measurement techniques. To present the various measured quantities into common format, CFD results from a companion paper also submitted for presentation at this meeting are utilized. For the case where the boundary layer remains attached, there is agreement between the various measurements as well as with Reynolds-averaged Navier-Stokes simulation solutions. As the impinging shock strength is increased beyond the point of separating the boundary layer, the congruity of the data wanes. Generally, agreement among the measurements exceeds the degree to which the CFD solutions agree with experiments. This suggests that unmodeled physical phenomena, such as transient motion of the reflected shock and separation bubble, give rise to the discrepancies observed in the computational results.

Shock-wave Boundary-layer interaction↗