Search NASA⌕ Search

SEARCH · Search NASA

Results for “signal analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Analysis of the Impedance Resonance of Piezoelectric Multi-Fiber Composite Stacks

Multi-Fiber CompositesTM (MFC's) produced by Smart Materials Corp behave essentially like thin planar stacks where each piezoelectric layer is composed of a multitude of fibers. We investigate the suitability of using previously published inversion techniques for the impedance resonances of monolithic co-fired piezoelectric stacks to the MFCTM to determine the complex material constants from the impedance data. The impedance equations examined in this paper are those based on the derivation. The utility of resonance techniques to invert the impedance data to determine the small signal complex material constants are presented for a series of MFC's. The technique was applied to actuators with different geometries and the real coefficients were determined to be similar within changes of the boundary conditions due to change of geometry. The scatter in the imaginary coefficient was found to be larger. The technique was also applied to the same actuator type but manufactured in different batches with some design changes in the non active portion of the actuator and differences in the dielectric and the electromechanical coupling between the two batches were easily measureable. It is interesting to note that strain predicted by small signal impedance analysis is much lower than high field stains. Since the model is based on material properties rather than circuit constants, it could be used for the direct evaluation of specific aging or degradation mechanisms in the actuator as well as batch sorting and adjustment of manufacturing processes.

Multi-fiber composites↗
NASA NTRS2019

Sensitvity analysis of SMAP-Reflectometry (SMAP-R) signals to vegetation water content

Global Navigation Satellite System – Reflectometry (GNSSR) techniques have proven successful to retrieve several geophysical parameters such as, ocean wind speed, soil moisture, altimetry, wetland dynamics, snow depth estimations. In this paper, the L2C GPS signals measured from the Soil Moisture Active Passive (SMAP) radar after its malfunction is used to investigate the effect of the vegetation water content on the electromagnetic signal. The SMAP Reflectometry (SMAP-R) measurements are obtained at V and H polarizations allowing for not only signal-to-noise ratio (SNR) analysis but also for polarimetric ratio (PR) studies.

Morris, Mary↗
NASA NTRS2020

Connecting Users and Applications with Po.daac Hosted GHRSST Data

The 80+ GHRSST public datasets represent a rich resource for sea surface temperature research and applications given their time series length, resolution, spatial coverage, varying measurement types and processing levels, and availability in the full spectrum of PO.DAAC tools and services ecosystem. The PO.DAAC has created a publicly accessible recipe suite for the user community to perform straightforward yet powerful computations on GHRSST data using python recipes, Jupyter notebooks, R, Matlab, and the NCO programming language. These recipes include numerical computations for regional and global SST trends, anomaly derivations, EOF analysis, climate signal reproduction, and ocean phenology. For example, one recipe reproduces a famous SST based warming figure from the Fourth National Climate Assessment (USA) while another focuses on quantifying the regional changes in ocean SST phenology. Most are python-based while some contain hybrid calls and leverage the NCO programming interface too. All are available on the PO.DAAC user forum (https://podaac.jpl.nasa.gov/forum/) and/or via the open source NASA GitHub repository (https://github.com/nasa/podaac_tools_and_services). Several are available in the Jupyter notebook framework including podaacypy (https://github.com/nasa/podaacpy), a recipe for GHRSST granule metadata discovery and application, and more recently a Jupyter notebook developed to support data analysis and visualization of a cloud-based Zarr formatted Level 4 MUR dataset in the AWS Open Data Registry. Throughout the summer of 2020, the PO.DAAC intends to add and migrate more of its numerical recipes to the Jupyter notebook framework and publish them on its open source GitHub repository.

Gentemann, Chelle↗
NASA NTRS2007

Using G4FETs as a Data Router for In-Plane Crossing of Signal Paths

Theoretical analysis and some experiments have demonstrated that siliconon- insulator (SOI) 4-gate transistors the type known as G(exp 4)FETs could be efficiently used for in-plane crossing of signal paths. Much of the effort of designing very-large-scale integrated (VLSI) circuits is focused on area-efficient routing of signals. The main source of difficulty in VLSI signal routing is the requirement to prevent crossing, in the same plane, of wires that are meant to be kept electrically insulated from each other. Consequently, it often becomes necessary to design and build VLSI circuits in multiple layers with vias (connections between conductors in different layers at selected locations). Suitable devices that would prevent, or at least sufficiently suppress, undesired electrical coupling (cross-talk) between wires crossing in the same plane would enable compact, simpler implementation complex interconnection networks with in-plane crossings that, heretofore, have not been possible in VLSI circuitry. The use of G4FETs as in-plane signal-crossing devices or routers, in combination with the use of G(exp 4)FETs as universal programmable logic gates, would create opportunities for reducing complexity in VLSI design.

Fijany, Amir↗
NASA NTRS1984

Field-aligned electron density irregularities near 500 km. Equator to polar cap topside sounder Z mode observations

In addition to spread F, evidence for field-aligned electron density irregularities is commonly observed on Alouette 2 topside sounder ionograms recorded near perigee (500 km). This evidence is provided by distinctive signal returns from sounder-generated Z mode waves. At low latitudes these waves become guided in wave ducts caused by field-aligned electron density irregularities and give rise to strong long-duration echoes. At high latitudes, extending well into the polar cap, these Z mode waves (and stimulated electrostatic waves at the plasma frequency) produce a series of vertical bars on the ionogram display as the satellite traverses discrete field-aligned density structures. The radio frequency (RF) noise environment to be expected in the 400 to 500 km altitude region from low to high latitudes was examined by analyzing perigee Alouette 2 topside sounder data. All observed noise bands were scaled on nearly 200 topside sounder ionograms recorded near perigee at low, mid, and high latitude telemetry stations. The minimum and maximum frequencies of each noise band were entered into a data base or compuer analysis. The signals of primary interest in the perigee study were found to be sounder-generated.

Benson, R. F.↗
NASA NTRS1985

Field-aligned electron density irregularities near 500 km Equator to polar cap topside sounder observations

In addition to spread F, evidence for field-aligned electron density irregularities is commonly observed on Alouette 2 topside sounder ionograms recorded near perigee (500 km). This evidence is provided by distinctive signal returns from sounder-generated Z mode waves. At low latitudes these waves become guided in wave ducts caused by field-aligned electron density irregularities and give rise to strong long-duration echoes. At high latitudes, extending well into the polar cap, these Z mode waves (and stimulated electrostatic waves at the plasma frequency) produce a series of vertical bars on the ionogram display as the satellite traverses discrete field-aligned density structures. The radio frequency (RF) noise environment to be expected in the 400 to 500 km altitude region from low to high latitudes was examined by analyzing perigee Alouette 2 topside sounder data. All observed noise bands were scaled on nearly 200 topside sounder ionograms recorded near perigee at low, mid, and high latitude telemetry stations. The minimum and maximum frequencies of each noise band were entered into a data base or computer analysis. The signals of primary interest in the perigee study were found to be sounder-generated.

Benson, R. F.↗
NASA NTRS1966

Minimizing the maximum signal energy.

Minimizing maximum signal energy, when signals are represented as points in N-dimensional space, by choosing origin as center of smallest hypersphere enclosing all points

SIGNAL ANALYSIS↗