Search NASA⌕ Search

SEARCH · Search NASA

Results for “sounding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Design and preliminary test results at Mach 5 of an axisymmetric slotted sound shield

The basic theory and sound attenuation mechanisms, the design procedures, and preliminary experimental results are presented for a small axisymmetric sound shield for supersonic wind tunnels. The shield consists of an array of small diameter rods aligned nearly parallel to the entrance flow with small gaps between the rods for boundary layer suction. Results show that at the lowest test Reynolds number (based on rod diameter) of 52,000 the noise shield reduced the test section noise by about 60 percent ( or 8 db attenuation) but no attenuation was measured for the higher range of test reynolds numbers from 73,000 to 190,000. These results are below expectations based on data reported elsewhere on a flat sound shield model. The smaller attenuation from the present tests is attributed to insufficient suction at the gaps to prevent feedback of vacuum manifold noise into the shielded test flow and to insufficient suction to prevent transition of the rod boundary layers to turbulent flow at the higher Reynolds numbers. Schlieren photographs of the flow are shown.

Beckwith, I. E.↗
NASA NTRS1976

Feasibility of making sound power measurements in the NASA Langley V/STOL tunnel test section

Based on exploratory acoustic measurements in Langley's V/STOL wind tunnel, recommendations are made on the methodology for making sound power measurements of aircraft components in the closed tunnel test section. During airflow, tunnel self-noise and microphone flow-induced noise place restrictions on the amplitude and spectrum of the sound source to be measured. Models of aircraft components with high sound level sources, such as thrust engines and powered lift systems, seem likely candidates for acoustic testing.

Brooks, T. F.↗
NASA NTRS1976

Wake-related sound generation from isolated airfoils

A model for the prediction of wake-related sound generation by a single airfoil is presented which assumes that the net force fluctuation on an airfoil can be expressed in terms of the net momentum fluctuation in the near wake of the airfoil. The model predicts a forcing function for sound generation which is related to the spectra of the two-point velocity correlations in the turbulent region near the airfoil trailing edge. Cross spectra were obtained from correlations of the longitudinal and transverse components of turbulence in the wake of a 36-in. chord airfoil in a wind tunnel using x-probe hot-wire sensors. Additional data were obtained from a 10-in. chord airfoil in a free-jet facility. Based on results from these tests, a scaling model was developed using the turbulent boundary-layer thickness as the primary length measure. The model was used to predict the sound radiated from a 2-in. chord airfoil for which acoustical data was available; good agreement was obtained both in level and spectral shape. The single-airfoil result is extended to a rotor geometry, and comparisons are studied for various aerodynamic parameters.

Clark, L. T.↗
NASA NTRS1975

Attenuation of sound in ducts with acoustic treatment - A generalized approximate equation

A generalized approximate equation for duct lining sound attenuation is presented. The specification of two parameters, the maximum possible attenuation and the optimum wall acoustic impedance is shown to completely determine the sound attenuation for any acoustic mode at any selected wall impedance. The equation is based on the nearly circular shape of the constant attenuation contours in the wall acoustic impedance plane. For impedances far from the optimum, the equation reduces to Morse's approximate expression. The equation can be used for initial acoustic liner design. Not least important is the illustrative nature of the solutions which provide an understanding of the duct propagation problem usually obscured in the exact calculations. Sample calculations using the approximate attenuation equation show that the peak and the bandwidth of the sound attenuation spectrum can be represented by quite simple functions of the ratio of actual wall acoustic resistance to optimum resistance.

Rice, E. J.↗
NASA NTRS1976

Non-dimensional groups in the description of finite-amplitude sound propagation through aerosols

Several parameters, which have fairly transparent physical interpretations, appear in the analytic description of finite-amplitude sound propagation through aerosols. Typically, each of these parameters characterizes, in some sense, either the sound or the aerosol. It also turns out that fairly obvious combinations of these parameters yield non-dimensional groups which, in turn, characterize the nature of the acoustic-aerosol interaction. This theme is developed in order to illustrate how a quick examination of such parameters and groups can yield information about the nature of the processes involved, without the necessity of extensive mathematical analysis. This concept is developed primarily from the viewpoint of sound propagation through aerosols, although complimentary acoustic-aerosol interaction phenomena are briefly noted.

Scott, D. S.↗
NASA NTRS1976

A microscopic description of sound absorption in the atmosphere

The various mechanisms which contribute to sound absorption in the atmosphere are identified and a technique for computing the contribution from each is presented. The similarities between sound absorption, laser fluorescence measurements, and the opto-acoustic effect are discussed. Finally, experimental sound absorption results are compared to predictions to test the microscopic energy transfer approach.

Bass, H. E.↗
NASA NTRS1976

The prediction and measurement of sound radiated by structures

Theories regarding the radiation of sound are reviewed and the implementation in strategies for explaining or measuring the sound produced by practical strucutres are discussed. Particular attention is given to those aspects that relate to the determination of the relative amounts of sound generated by various parts of a machine or structure, which can be very useful information for noise reduction efforts.

Lyon, R. H.↗
NASA NTRS1976

Sound radiation from randomly vibrating beams of finite circular cross section

The radiation of sound from vibrating cylindrical beams is analyzed based on the frequency of the beam vibrations and the physical characteristics of the beam and its surroundings. A statistical analysis of random beam vibrations allows this result to be independent of the boundary conditions at the ends of the beam. The acoustic power radiated by the beam can be determined from a knowledge of the frequency band vibration data without a knowledge of the individual modal vibration amplitudes. A practical example of the usefulness of this technique is provided by the application of the theoretical calculations to the prediction of the octave band acoustic power output of the picking sticks of an automatic textile loom. Calculations are made of the expected octave band sound pressure levels based on measured acceleration data. These theoretical levels are subsequently compared with actual sound pressure level measurements of loom noise.

Sutterlin, M. W.↗
NASA NTRS1976

Field support, data analysis and associated research for the acoustic grenade sounding program

Temperature and horizontal winds in the 30 to 90 km altitude range of the upper atmosphere, were determined by acoustic grenade soundings conducted at Wallops Island, Virginia and Kourou, French Guiana. Field support provided at these locations included deployment of the large area microphone system, supervision, maintenance and operation of sound ranging stations; and coordination of activities. Data analysis efforts included the analysis of field data to determine upper atmospheric meteorological parameters. Profiles for upper atmospheric temperature, wind and density are provided in plots and tables for each of the acoustic grenade soundings conducted during the contract period. Research efforts were directed toward a systematic comparison of temperature data from acoustic grenade with other meteorological sensor probes in the upper atmosphere.

Barnes, T. G.↗
NASA NTRS1976

Sound propagation in choked ducts

The linearized equations describing the propagation of sound in variable area ducts containing flow are shown to be singular when the duct mean flow is sonic. The singularity is removed when previously ignored nonlinear terms are retained. The results of a numerical study, for the case of plane waves propagating in a one-dimensional converging-diverging duct, show that the sound field is adequately described by the linearized equations only when the axial mean flow Mach number at the duct throat M sub th 0.6. For M sub th 0.6, the numerical results showed that acoustic energy flux was not conserved. An attempt was made to extend the study to include the nonlinear behavior of the sound field. Meaningful results were not obtained due, primarily, to numerical difficulties.

Hersh, A. S.↗
NASA NTRS1977

The generation of sound by vorticity waves in swirling duct flows

Swirling flow in an axisymmetric duct can support vorticity waves propagating parallel to the axis of the duct. When the cross-sectional area of the duct changes a portion of the wave energy is scattered into secondary vorticity and sound waves. Thus the swirling flow in the jet pipe of an aeroengine provides a mechanism whereby disturbances produced by unsteady combustion or turbine blading can be propagated along the pipe and subsequently scattered into aerodynamic sound. In this paper a linearized model of this process is examined for low Mach number swirling flow in a duct of infinite extent. It is shown that the amplitude of the scattered acoustic pressure waves is proportional to the product of the characteristic swirl velocity and the perturbation velocity of the vorticity wave. The sound produced in this way may therefore be of more significance than that generated by vorticity fluctuations in the absence of swirl, for which the acoustic pressure is proportional to the square of the perturbation velocity. The results of the analysis are discussed in relation to the problem of excess jet noise.

Howe, M. S.↗
NASA NTRS1977

Tube method of sound-absorption measurement extended to frequencies far above cutoff

Equipment had been constructed for measuring sound absorption in the frequency range from 4 to 100 kHz in a large tube 25.4 cm in diameter and 4.8-m long. The technique employs a large moveable solid-dielectric capacitance transducer that completely fills the tube cross section and generates pulses of plane waves. An identical transducer terminates the other end of the tube and serves as a microphone to detect and reflect the sound pulses. Measurements in argon, nitrogen, and air indicate that the attenuation of the sound pulses differs by less than 1% from values calculated for the zero-order mode for frequencies up to 44 times the cutoff frequency for the first 'nonplane' mode. Above that frequency, the measured values are less than those predicted by theory by an amount that is approximately proportional to the wavelength to the -3.1 power. In a smaller tube of similar construction, the high-frequency deviation from theory is absent.

Shields, F. D.↗
NASA NTRS1978

Application of second-order turbulent modeling to the prediction of radiated aerodynamic sound

The Ribner formulation of the generation of aerodynamic sound is coupled with predictions of second-order velocity correlations and integral scale to estimate the sound radiated from several complicated jet flows. In particular, it is shown that the sound radiated from a cold swirling jet is greater than from its nonswirling equal thrust counterpart. The noise radiated from the flow field of a multitube suppressor was estimated and compared with an equal thrust diameter Gaussian jet. It is shown that the multitube concept is indeed quieter.

Bilanin, A. J.↗
NASA NTRS1978

The GISS sounding temperature impact test

The impact of DST 5 and DST 6 satellite sounding data on mid-range forecasting was studied. The GISS temperature sounding technique, the GISS time-continuous four-dimensional assimilation procedure based on optimal statistical analysis, the GISS forecast model, and the verification techniques developed, including impact on local precipitation forecasts are described. It is found that the impact of sounding data was substantial and beneficial for the winter test period, Jan. 29 - Feb. 21. 1976. Forecasts started from initial state obtained with the aid of satellite data showed a mean improvement of about 4 points in the 48 and 772 hours Sub 1 scores as verified over North America and Europe. This corresponds to an 8 to 12 hour forecast improvement in the forecast range at 48 hours. An automated local precipitation forecast model applied to 128 cities in the United States showed on an average 15% improvement when satellite data was used for numerical forecasts. The improvement was 75% in the midwest.

Halem, M.↗
NASA NTRS1977

The impact of satellite soundings upon the NMC analysis and forecast system

The importance of satellite-derived soundings on National Meteorological Center weather analysis and forecast was studied by comparing summertime DST (Aug. 18-Sept. 4, 1975) forecasts generated by analyses with and without both the operational VTPR soundings from NOAA-4 and the experimental soundings derived from the infrared and microwave instruments aboard Nimbus-6. Objective and subjective procedures, including evaluation of standard skill scores and judgment by skilled synopticians, was used to evaluate the importance of satellite data. The investigation shows that satellite data do not aid numerical weather prediction in the Northern Hemisphere.

Tracton, M. S.↗
NASA NTRS1980

Overall loudness of steady sounds

Loudness (in sones) and loudness level (in phons) of any sound that is steady for tenths of second can be calculated using computer program derived from new operational theory of loudness. Theory is constructed from psychoacoustic and physiological data on mammalian (monkey) auditory systems. Computer program permits prediction of loudness of any steady sound including, for example, transportation noises, machinery noises, and other environmental noises, with possible additional applications to broadcasting, sound reproduction, establishment and enforcement of noise laws.

Howes, W. L.↗
NASA NTRS1978

Excitation of instability waves in a two-dimensional shear layer by sound

The excitation of instability waves in a plane compressible shear layer by sound waves is studied. The problem is formulated mathematically as an inhomogeneous boundary-value problem. A general solution for abitrary incident sound wave is found by first constructing the Green's function of the problem. Numerical values of the coupling constants between incident sound waves and excited instability waves for a range of flow Mach number are calculated. The effect of the angle of incidence in the case of a beam of acoustic waves is analyzed. It is found that for moderate subsonic Mach numbers a narrow beam aiming at an angle between 50 to 80 deg to the flow direction is most effective in exciting instability waves.

Tam, C. K. W.↗
NASA NTRS1979

A 'special effort' to provide improved sounding and cloud-motion wind data for FGGE

Enhancement and editing of high-density cloud motion wind assessments and research satellite soundings have been necessary to improve the quality of data used in The Global Weather Experiment. Editing operations are conducted by a man-computer interactive data access system. Editing will focus on such inputs as non-US satellite data, NOAA operational sounding and wind data sets, wind data from the Indian Ocean satellite, dropwindsonde data, and tropical mesoscale wind data. Improved techniques for deriving cloud heights and higher resolution sounding in meteorologically active areas are principal parts of the data enhancement program.

Greaves, J. R.↗