Search NASA⌕ Search

SEARCH · Search NASA

Results for “source location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Modeling the refraction of microbaroms by the winds of a large maritime storm

Continuous infrasonic signals produced by the ocean surface interacting with the atmosphere, termed microbaroms, are known to be generated by a number of phenomena including large maritime storms. Storm generated microbaroms exhibit axial asymmetry when observed at locations far from the storm due to the source location being offset from the storm center. Because of this offset, a portion of the microbarom energy will radiate towards the storm center and interact with the winds in the region. Detailed here are predictions for the propagation of microbaroms through an axisymmetric, three-dimensional model storm. Geometric propagation methods have been utilized and the predicted horizontal refraction is found to produce signals that appear to emanate from a virtual source near the storm center when observed far from the storm. This virtual source near the storm center is expected to be observed only from a limited arc around the storm system with increased extent associated with more intense wind fields. This result implies that identifying the extent of the arc observing signal from the virtual source could provide a means to estimate the wind structure using infrasonic observations far from the storm system.

54 ENVIRONMENTAL SCIENCES↗

Simulations and Experimental Verifications of an Algorithm for Radiation Source Mapping and Navigational Path Generation

Accurate and efficient mapping and localization of both ionizing and non-ionizing radiation sources are important across many different fields. As such, a versatile mapping and navigational path generation algorithm, which can be applied to any point source measurements that follow an inverse-square characteristic, was developed using non-linear least squares methods. Forty thousand simulations were performed on the algorithm, which located sources successfully in a 10 m × 10 m × 10 m three-dimensional space with a success rate of over 80% across different noise functions, given a proportional constant of 10 to 1,000. The algorithm was also verified experimentally with small-scale radioactive decontamination of a 70 cm × 70 cm surface and localization of a lost Wi-Fi router in a 70 m × 70 m open field. One hundred twenty-one measurements were taken from each experiment, which were then fed into the algorithm for navigation. For the radioactive 137Cs source, the estimated locations were within 7 cm × 7 cm of the answer in 79.3% of the scenarios, while the Wi-Fi router was located to within 7 m × 7 m in 57.9% of the tests. In general, the method requires much less information and data than a geographically comprehensive survey and thus shows a lot of potential for practical applications, such as lost source retrieval with unmanned aerial vehicles, small-scale decontamination, mapping undocumented Wi-Fi routers or radio towers, and radiation simulation with radio signals. Here, the different failure modes, desirable features, and potential improvements were also identified but remain as future work.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The solid angle (geometry factor) for a spherical surface source and an arbitrary detector aperture

It is proven that the solid angle (or geometry factor, also called the geometrical efficiency) for a spherically symmetric outward-directed surface source with an arbitrary radius and polar angle distribution and an arbitrary detector aperture is equal to the solid angle for an isotropic point source located at the center of the spherical surface source and the same detector aperture.

42 ENGINEERING↗

THE CHANDRA VIEW OF NGC 4178: THE LOWEST MASS BLACK HOLE IN A BULGELESS DISK GALAXY?

Using high-resolution Chandra data, we report the presence of a weak X-ray point source coincident with the nucleus of NGC 4178, a late-type bulgeless disk galaxy known to have high-ionization mid-infrared (mid-IR) lines typically associated with active galactic nuclei (AGNs). Although the faintness of this source precludes a direct spectral analysis, we are able to infer its basic spectral properties using hardness ratios. X-ray modeling, combined with the nuclear mid-IR characteristics, suggests that NGC 4178 may host a highly absorbed AGN accreting at a high rate with a bolometric luminosity on order of 10{sup 43} erg s{sup -1}. The black hole mass estimate, based on our Chandra data and archival Very Large Array data using the most recent fundamental plane relations, is {approx}10{sup 4}-10{sup 5} M{sub Sun }, possibly the lowest mass nuclear black hole currently known. There are also three off-nuclear sources, two with a similar brightness to the nuclear source at 36'' and 32'' from the center. As with the nuclear source, hardness ratios are used to estimate spectra for these two sources, and both are consistent with a simple power-law (PL) model with absorption. These two sources have X-ray luminosities of the order of {approx}10{sup 38} erg s{sup -1}, which place them at the threshold between X-ray binaries and ultraluminous X-ray sources (ULXs). The third off-nuclear source, located 49'' from the center, is the brightest source detected, with an X-ray luminosity of {approx}10{sup 40} erg s{sup -1}. Its spectrum is well fit with an absorbed PL model, suggesting that it is a ULX. We also fit its spectrum with the Bulk Motion Comptonization model and suggest that this source is consistent with an intermediate-mass black hole of mass (6 {+-} 2) Multiplication-Sign 10{sup 3} M{sub Sun }.

79 ASTRONOMY AND ASTROPHYSICS↗

An explainable variational autoencoder model for three-dimensional acoustic emission source localization in hollow cylindrical structures

We introduce an explainable variational autoencoder for three-dimensional (3D) localization of acoustic emission sources in hollow cylindrical structures, with an unsupervised approach. This research capitalizes on multi-arrival waveforms generated by helical path propagation in cylindrical geometries to enable efficient two-receiver localization. By integrating the modal characteristics of Lamb modes under multi-path conditions, we demonstrate that two sets of time-of-arrival differences and peak amplitudes extracted from one receiver can serve as effective localization features. This initial approach identifies four potential source locations, highlighting the feasibility of two-receiver source localization using traditional feature extraction methods. However, direct extraction can be challenging when mode overlaps occur, complicating the localization process. To address this, our work proposes a novel waveform-based method. This method leverages the consistent dispersion characteristics within isotropic materials, where each unique combination of mode arrival times and peak amplitudes constructs a distinct waveform. This distinctiveness overcomes the ambiguities associated with mode overlaps, significantly enhancing the method’s precision and robustness. Our approach adopts a data-driven strategy for waveform-based localization using variational autoencoder (VAE). VAE discerns waveform patterns for localization, while also addressing data uncertainties. The VAE’s encoder and decoder networks capture the localization process and the source’s influence on waveform generation, respectively, guiding latent variables to segregate waveforms by source in the latent space. The design of the learning process focuses on specific localization characteristics to enhance result explainability. Localization predictions are generated by projecting test waveforms, not included in the training set, onto a trained latent space. The prediction is determined using a nearest-neighbor approach based on the closest latent representation of a source. Validation with pencil-lead-break tests on a metallic pipe confirmed our method’s effectiveness, achieving an averaged 3D localization accuracy of 0.84.

Lee, Guan-Wei↗

Scattering of terrestrial kilometric radiation at very high altitudes

On a number of occasions during the 3.8 yr. operating lifetime of RAE-2, strong terrestrial kilometric radiation was observed when the spacecraft was over the far side of the moon and when the low altitude terrestrial magnetosphere was completely obscured from view. If these deep lunar occultation events are used to infer radio source locations, then it is found that the apparent source must sometimes be situated at geocentric distances of 10 to 40 sub E or more. From an analysis of these events, it is shown that they are probably due to propagation effects rather than the actual generation of the emission at such large distances. The kilometric radiation can be generated near the earth at auroral latitudes and subsequently strongly scattered in the magnetosheath and nearby solar wind to produce the large apparent distances. The most likely scatterers are density inhomogeneities in the magnetosheath plasma and ion plasma waves in the magnetosheath and the upstream solar wind.

Alexander, J. K.↗

Scattering of terrestrial kilometric radiation at very high altitudes

On a number of occasions during the 3.5-yr operating lifetime of Rae 2, strong terrestrial kilometric radiation has been observed when the spacecraft was over the far side of the moon and when the low-altitude terrestrial magnetosphere was completely obscured from view. If these deep lunar occultation events are used to infer radio source locations, then it is found that the apparent source must sometimes be situated at geocentric distances of 10-40 earth-radii or more. From an analysis of these events, it is shown that they are probably due to propagation effects rather than the actual generation of the emission at such large distances. The kilometric radiation can be generated near the earth at auroral latitudes and subsequently strongly scattered in the magnetosheath and nearby solar wind to produce the large apparent distances. The most likely scatterers are density inhomogeneities in the magnetosheath plasma and ion plasma waves in the magnetosheath and the upstream solar wind.

Alexander, J. K.↗

A model for intensity profiles of dust jets near the nucleus of Comet Halley

The Giotto spacecraft's Halley Multicolor Camera images have been used to derive intensity profiles of the jetlike dust features that are associated with active regions of the Comet Halley nucleus. An intensity profile's asymptotic behavior at a radius greater than 100 km from the nucleus can be seen as arising from a source located at a hypothetical point below the active source region. Several source distributions are investigated. The extended source model considers divergent dust flow from an active area of arbitrary shape. It is concluded that the surface is neither smooth nor homogeneous, but must instead be characterized by varying curvature and roughness in order to reflect the observed conical dust flow.

Huebner, W. F.↗

Reflection type skin friction meter

A housing block is provided having an upper surface conforming to the test surface of a model or aircraft. An oil film is supplied upstream of a transparent wedge window located in this upper surface by an oil pump system located external to the housing block. A light source located within the housing block supplies a light beam which passes through this transparent window and is reflected back through the transparent window by the upper surface of the oil film to a photo-sensitive position sensor located within the housing. This position sensor allows the slope history of the oil film caused by and aerodynamic flow to be determined. The skin friction is determined from this slope history. Internally located mirrors augment and sensitize the reflected beam as necessary before reaching the position sensor. In addition, a filter may be provided before this sensor to filter the beam.

Bandyopadhyay, Promode R.↗

Possible Very Distant or Optically Dark Cluster of Galaxies

The goal of this proposal was an XMM followup observation of the extended X-ray source detected in our ROSAT PSPC cluster survey. Approximately 95% of extended X-ray sources found in the ROSAT data were optically identified as clusters of galaxies. However, we failed to find any optical counterparts for C10952-0148. Two possibilities remained prior to the XMM observation: (1) This is was a very distant or optically dark cluster of galaxies, too faint in the optical, in which case XMM would easily detect extended X-ray emission and (2) this was a group of point-like sources, blurred to a single extended source in the ROSAT data, but easily resolvable by XMM due to a better energy resolution. The XMM data have settled the case --- C10952-0148 is a group of 7 relatively bright point sources located within 1 square arcmin. All but one source have no optical counterparts down to I=22. Potentially, this can be an interesting group of quasars at a high redshift. We are planning further optical and infrared followup of this system.

Vikhlinin, Alexey↗

The Solid Angle for a Spherical Surface Source and a Detector with an Arbitrary Aperture: An Elegant Proof

It has previously been proven that the solid angle (or geometry factor, also called the geometrical efficiency) for a spherically symmetric outward-directed surface source with an arbitrary radius and polar angle distribution and an arbitrary detector aperture is equal to the solid angle for an isotropic point source located at the center of the spherical surface source and the same detector aperture. The solid angle for a source-detector system is the fraction of source particles that enter the detector aperture and so it is not purely geometric-the angular distribution of the source is a factor. The previous proof relied on an analytic transport-theory (streaming only) calculation of the solid angle Ω for a spherically symmetric surface source and a point detector. In this paper, a new, more elegant proof is given. Since the net current across any portion of a plane that intersects the center of a spherical surface source is zero, the solid angle for a spherical surface source with any polar angle distribution and a uniform azimuthal angle distribution and any detector aperture is equal to the solid angle for an isotropic point source and the same detector. This insight obviates the calculus and trigonometry involved in the previous proof. (author)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The x ray reflectivity of the AXAF VETA-I optics

The x-ray reflectivity of the VETA-I optic, the outermost shell of the AXAF x-ray telescope, with a bare Zerodur surface, is measured and compared with theoretical predictions. Measurements made at energies of 0.28, 0.9, 1.5, 2.1, and 2.3 keV are compared with predictions based on ray trace calculations. The data were obtained at the x-ray calibrations facility at Marshall Space Flight Center with an electron impact x-ray source located 528 m from the grazing incidence mirror. The source used photoelectric absorption filters to eliminate bremsstrahlung continuum. The mirror has a diameter of 1.2 m and a focal length of 10 m. The incident and reflected x-ray flux are detected using two proportional counters, one located in the incident beam of x-rays at the entrance aperture of the VETA-I, and the other in the focal plane behind an aperture of variable size. Results on the variation of the reflectivity with energy as well as the absolute value of the reflectivity are presented. We also present a synchrotron reflectivity measurement with high energy resolution over the range 0.26 to 1.8 keV on a flat Zerodur sample, done at NSLS. We present evidence for contamination of the flat by a thin layer of carbon on the surface, and the possibility of alteration of the surface composition of the VETA-I mirror perhaps by the polishing technique. The overall agreement between the measured and calculated effective area of VETA-I is between 2.6 percent and 10 percent, depending on which model for the surface composition is adopted. Measurements at individual energies deviate from the best-fitting calculation to 0.3 to 0.8 percent, averaging 0.6 percent at energies below the high energy cutoff of the mirror reflectivity, and are as high as 20.7 percent at the cutoff. We also discuss the approach to the final preflight calibration of the full AXAF flight mirror.

Kellogg, Edwin M.↗

Retrieval, Disposal, and Disposition of Legacy 252 Cf Sealed Sources

In this article, we describe work performed on behalf of the US Department of Energy (DOE) to disposition 467 government-owned, sealed californium-252 ( 252 Cf) sources located at 52 academic and government research sites. These sources are the legacy of the DOE 252 Cf Loan/Lease Program, which operated from the late 1960s until 2008, when the loan program closed abruptly. Although the DOE took decades to fabricate and distribute the sources, best safety and nuclear accountability practices demanded retrieval or disposition of all loaned sources as soon as achievable after the loan program was closed. An adaptable disposition approach was developed, and disposition of the sources was pursued. The approach involved a combination of source retrievals, disposal actions, and source ownership transfers. A new shielded shipping container was designed and deployed to aid in source retrievals. In a couple cases, incomplete source fabrication and shipping records prevented shipment, and those sources were left indefinitely with the customer in a safe configuration. Lastly, all the sources in the inventory were safely dispositioned in some way, and lessons learned from this effort are provided.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

HighNESS conceptual design report: Volume I

The European Spallation Source, currently under construction in Lund, Sweden, is a multidisciplinary international laboratory. Once completed to full specifications, it will operate the world’s most powerful pulsed neutron source. Supported by a 3 million Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) has been completed to develop a second neutron source located below the spallation target. Compared to the first source, designed for high cold and thermal brightness, the new source has been optimized to deliver higher intensity, and a shift to longer wavelengths in the spectral regions of cold (CN, 2–20 Å), very cold (VCN, 10–120 Å), and ultracold (UCN, >500 Å) neutrons. The second source comprises a large liquid deuterium moderator designed to produce CN and support secondary VCN and UCN sources. Various options have been explored in the proposed designs, aiming for world-leading performance in neutronics. These designs will enable the development of several new instrument concepts and facilitate the implementation of a high-sensitivity neutron-antineutron oscillation experiment (NNBAR). This document serves as the Conceptual Design Report for the HighNESS project, representing its final deliverable.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

OSO-8 X-ray observations of AM Herculis

Hard X-ray observations of the binary system AM Her were coincident with soft X-ray and ground-based optical measurements. In the 2-60 KeV band, variability was detected with an eclipse during phases 0.5 to 0.7 with respect to the 0. d 12892 period optical minima, synchronous with the known soft X-ray eclipse. The 2-60 KeV uneclipsed flux was 9.5 x 10 to the minus 10th power erg sq cm/sec, of which 86% lies above 10 keV. Thus AM Her contains a hard source located near the similarly eclipsed soft X-ray source. The X-ray data are interpreted in terms of thermal bremsstrahlung from accretion onto a white dwarf.

Swank, J. H.↗

OSO-8 X-ray observations of AM Herculis

Results are reported for hard X-ray observations of the binary system AM Her, which were coincident with soft X-ray and ground-based optical measurements. In the 2-60-keV band, variability was detected with an eclipse during phases 0.5 to 0.7 with respect to the 0.12892-day optical minima, synchronous with the known soft X-ray eclipse. The 2-60-keV uneclipsed flux was 9.5 by 10 to the -10th power erg/sq cm per sec, of which 86% lies above 10 keV. Thus, AM Her contains a hard source located near the similarly eclipsed soft X-ray source. The X-ray data are interpreted in terms of thermal bremsstrahlung from accretion onto a white dwarf.

Swank, J.↗

Evidence for a variable far-infrared source in NGC 6334

NGC 6334 has been mapped with a 40-250 micron photometer with 1 arcmin resolution. Six sources of far-infrared radiation have been detected. The second-strongest source was not detected in an earlier (2.7 years) 40-350 micron survey of the same region. This source is interpreted as a variable far-infrared source. The new source, located at the position of OH and H2O maser sources, is extended (0.7 arcmin FWHM) and has a bolometric luminosity of 190,000 solar luminosities and may represent a hitherto unobserved transient stage of protostellar collapse.

Mcbreen, B.↗

Source of O mode radio emissions from the dayside of Uranus

During the inbound trajectory toward Uranus, the Planetary Radio Astronomy instrument on Voyager 2 observed narrow-band smooth (n-smooth) emission at frequencies centered near 60 kHz and O-mode emission (the dayside source) in a frequency range narrowly confined around 160 kHz. Assuming empirical models of the plasma density for the dayside magnetosphere of Uranus, and using cold plasma theory together with observational constraints, ray-tracing calculations are performed to determine the source location of the O-mode emission. The dayside source appears to originate along magnetic field lines with a footprint near the north magnetic pole. Sources of nightside high-frequency broadband smooth (b-smooth) emission observed by Voyager after encounter are believed to exist near the conjugate footprint of these same field lines. This would indicate that the particle population supplying the free energy source has energies at least as high as a few keV.

Menietti, J. D.↗