Search NASA⌕ Search

SEARCH · Search NASA

Results for “stellarator optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Efficient calculation of self magnetic field, self-force, and self-inductance for electromagnetic coils with rectangular cross-section

Abstract For designing high-field electromagnets, the Lorentz force on coils needs to be computed in order to design suitable support structures, and the inductance should be computed to evaluate the stored energy and dynamics. Also, the magnetic field and its variation inside the conductor is of interest for computing stress and strain, and due to superconducting quench limits. For these force, inductance, energy, and internal field calculations, the coils cannot be naively approximated as infinitesimally thin filaments due to divergences when the source and evaluation points coincide, so more computationally demanding calculations are usually required, resolving the finite cross-section of the conductors. Here, we present a new alternative method that enables the internal magnetic field vector, self-force, and self-inductance to be computed rapidly and accurately within a 1D filament model. The method is applicable to coils for which the curve center-line can have general noncircular shape, as long as the conductor width is small compared to the radius of curvature. This paper extends a previous calculation for circular-cross-section conductors (Hurwitz et al 2024 IEEE Trans. Magn. ) to consider the case of rectangular cross-section. The reduced model is derived by rigorous analysis of the singularity, regularizing the filament integrals such that they match the true high-dimensional integrals at high coil aspect ratio. The new filament model exactly recovers analytic results for a circular coil, and is shown to accurately reproduce full finite-cross-section calculations for a non-planar coil of a stellarator magnetic fusion device. Due to the efficiency of the model here, it is well suited for use inside design optimization.

Landreman, Matt (ORCID:000000027233577X)↗

Emission from dust in visual reflection nebulae at infrared and submillimeter wavelengths

Far-IR and submillimeter images of five bright visual reflection nebulae, IC 446, NGC2247, NGC 2245, NGC 7023, and CED 201 are presented and used with composite IR spectra to derive parameters such as the fraction of nebulae emission attributed to molecule-sized grains, the range of nebulae grain albedos, gas densities, and gas cloud geometries. The results show that 30-45 percent of the nebulae emission lies at wavelengths of less than 30 microns. The variation in IR luminosity may be related to variations in nebulae gas density and less than optimal gas cloud geometries rather than to anomalous grain albedos. Relative extinction efficincies of roughly 1000-5000 are inferred for stellar photospheres with effective wavelengths of roughly 0.25-0.5 micron. The resultant mass-extinction coefficient is roughly 10-50 sq cm/g.

Casey, Sean C.↗

The ULX Population in the Starburst Galaxy NGC 253

Optimism is mounting for the existence of intermediate mass black holes (IMBH), which occupy the mass spectrum somewhere between the stellar-mass and supermassive varieties. IMBH are naturally predicted by theoretical stellar and black hole evolution models, but the strong attention to them began only recently with the discovery of ultraluminous x-ray sources (ULX). If isotropic and accreting normally, ULX have luminosities tens to thousands of times greater than the Eddington luminosity of a neutron star or stellar-mass black hole. A standard interpretation of their x-ray flux implies that they are powered by IMBH. On the other hand, they may be stellar-mass black holes that are beamed or emit anisotropically. Therefore, the exact nature of ULX is highly controversial. ULX are common in starburst galaxies. At a distance of only 3 Mpc, NGC 253 is bright, nearby, and one of the best-studied starburst galaxies. Approximately 50 distinct x-ray point sources are detected in or near the plane of the galaxy. At least six of these are ULX, with luminosities greater than 10 times that expected for a stellar-mass, accreting compact object. We present new Chandra data from an 80 ksec observation of NGC 253 obtained in 2003 that provides high quality spectra of these sources. Comparing the 1999 and 2003 Chandra observations, the sources have varied significantly over the course of four years, with one of the ULX disappearing completely. The ULX spectra are similar to black-hole XRBs and at least one appears to possess an iron K line. We will discuss what insight these data provide for the nature of ULX in NGC 253 .

Weaver, K. A.↗

The COS Legacy Archive Spectroscopy Survey (CLASSY) Treasury Atlas

Far-ultraviolet (FUV; ~1200–2000 Å) spectra are fundamental to our understanding of star-forming galaxies, providing a unique window on massive stellar populations, chemical evolution, feedback processes, and reionization. The launch of the James Webb Space Telescope will soon usher in a new era, pushing the UV spectroscopic frontier to higher redshifts than ever before; however, its success hinges on a comprehensive understanding of the massive star populations and gas conditions that power the observed UV spectral features. This requires a level of detail that is only possible with a combination of ample wavelength coverage, signal-to-noise, spectral-resolution, and sample diversity that has not yet been achieved by any FUV spectral database. We present the Cosmic Origins Spectrograph Legacy Spectroscopic Survey (CLASSY) treasury and its first high-level science product, the CLASSY atlas. CLASSY builds on the Hubble Space Telescope (HST) archive to construct the first high-quality (S/N 1500 Å ≳ 5/resel), high-resolution (R ~ 15,000) FUV spectral database of 45 nearby (0.002 < z < 0.182) star-forming galaxies. The CLASSY atlas, available to the public via the CLASSY website, is the result of optimally extracting and coadding 170 archival+new spectra from 312 orbits of HST observations. The CLASSY sample covers a broad range of properties including stellar mass (6.2 < log M * (M ⊙ ) < 10.1), star formation rate (–2.0 < log SFR (M ⊙ yr –1 ) < +1.6), direct gas-phase metallicity (7.0 < 12+log(O/H) < 8.8), ionization (0.5 < O 32 < 38.0), reddening (0.02 < E(B – V) < 0.67), and nebular density (10 < n e (cm –3 ) < 1120). CLASSY is biased to UV-bright star-forming galaxies, resulting in a sample that is consistent with the z ~ 0 mass–metallicity relationship, but is offset to higher star formation rates by roughly 2 dex, similar to z ≳ 2 galaxies. This unique set of properties makes the CLASSY atlas the benchmark training set for star-forming galaxies across cosmic time.

79 ASTRONOMY AND ASTROPHYSICS↗

The GMRT archive atomic gas survey – II. Mass modelling and dark matter halo properties across late-type spirals

Studying the kinematics and mass modelling of galaxies from H i 21 cm data provides valuable insights into the properties of both the baryonic components and the dark matter halo in nearby galaxies. Despite many observational studies, mass modelling of galaxies remains challenging due to different limitations. For example, most of the previous studies involving mass modelling are based on rotation curves derived from 2D velocity fields from H i or H α spectroscopic observation which are often affected by beam smearing and projection effect. However, kinematic modelling done by fitting the ‘Tilted ring model’ to 3D data cube is not affected by these issues. In this study, we present and compare 3D kinematic modelling of a pilot sample of 11 galaxies from the GMRT archive atomic gas survey (GARCIA) using two different publicly available pipelines. We model the observed H i rotation curve using 3.6-μm infrared data and SDSS r-band data for stellar contribution, H i surface density profile for gas, and Navarro–Frenk–White profile for dark matter halo; and employ the Markov chain Monte Carlo optimization method for parameter estimation. Further, to validate our analysis, we revisit important scaling relations, e.g. the M gas –M star relation, M star –M halo relation, M gas –M halo relation and Baryonic Tully–Fisher relation. Here, the scaling relations from our analysis are broadly consistent with that reported in the literature. A larger sample of galaxies from GARCIA in the near future will allow studying these scaling relations in greater details.

79 ASTRONOMY AND ASTROPHYSICS↗

The effect of an offset polar cap dipolar magnetic field on the modeling of the vela pulsar's γ-ray light curves

We performed geometric pulsar light curve modeling using static, retarded vacuum, and offset polar cap (PC) dipole B-fields (the latter is characterized by a parameter ϵ), in conjunction with standard two-pole caustic (TPC) and outer gap (OG) emission geometries. The offset-PC dipole B-field mimics deviations from the static dipole (which corresponds to ϵ=0). In addition to constant-emissivity geometric models, we also considered a slot gap (SG) E-field associated with the offset-PC dipole B-field and found that its inclusion leads to qualitatively different light curves. Solving the particle transport equation shows that the particle energy only becomes large enough to yield significant curvature radiation at large altitudes above the stellar surface, given this relatively low E-field. Therefore, particles do not always attain the radiation-reaction limit. Our overall optimal light curve fit is for the retarded vacuum dipole field and OG model, at an inclination angle α=78{sub −1}{sup +1{sup {sup ∘}}} and observer angle ζ=69{sub −1}{sup +2{sup {sup ∘}}}. For this B-field, the TPC model is statistically disfavored compared to the OG model. For the static dipole field, neither model is significantly preferred. We found that smaller values of ϵ are favored for the offset-PC dipole field when assuming constant emissivity, and larger ϵ values favored for variable emissivity, but not significantly so. When multiplying the SG E-field by a factor of 100, we found improved light curve fits, with α and ζ being closer to best fits from independent studies, as well as curvature radiation reaction at lower altitudes.

79 ASTRONOMY AND ASTROPHYSICS↗

Spectroscopic Fourth-order Coronagraph for the Characterization of Terrestrial Planets at Small Angular Separations from Host Stars

We propose a new approach for high-contrast imaging at the diffraction limit using segmented telescopes in a modest observation bandwidth. This concept, named “spectroscopic fourth-order coronagraphy,” is based on a fourth-order coronagraph with a focal-plane mask that modulates the complex amplitude of the Airy disk along one direction. While coronagraphs applying the complex amplitude mask can achieve the theoretical limit performance for any arbitrary pupils, the focal-plane mask severely limits the bandwidth. Here, focusing on the fact that the focal-plane mask modulates the complex amplitude along one direction, we noticed that the mask can be optimized for each spectral element generated by a spectrograph. We combine the fourth-order coronagraph with two spectrographs to produce a stellar spectrum on the focal plane and reconstruct a white pupil on the Lyot stop. Based on the wave-front analysis of an optical design applying an Offner-type imaging spectrograph, we found that the achievable contrast of this concept is 10{sup −10} at 1.2–1.5 times the diffraction limit over the wavelength range of 650–750 nm for the entrance pupil of the LUVOIR telescope. Thus, this coronagraph concept could bring new habitable planet candidates not only around G- and K-type stars beyond 20–30 pc but also around very nearby M-type stars. This approach potentially promotes the characterization of the atmospheres of nearby terrestrial planets with future on- and off-axis segmented large telescopes.

47 OTHER INSTRUMENTATION↗

Astrometry

Progress in astrometry is reviewed. Aspects of photographic astrometry are addressed, including the use and optimization of emulsions as detectors and the application of side-field and long-focus photographic astrometry to the determination of stellar positions, to proper motion surveys, the determination of more accurate parallaxes, the study of binaries, and the examination of the membership and internal motions of star clusters. The advantages and disadvantages of photoelectric astrometry are summarized, and the instruments used in this field is discussed, including scanners, detector arrays, stellar interferometers, space telescopes, and satellites. Promising observational methods for studying binary stars are addressed. Astrometry derived from meridian circle observations is considered, emphasizing the FK4 system. The use of radio astrometry is briefly discussed.

Van Altena, W. F.↗

Intrinsic plasma rotation and Reynolds stress at the plasma edge in the HSX stellarator

Using multi-tipped Langmuir probes in the edge of the HSX stellarator, the radial electric field and parallel flows are found to deviate from the values calculated by the neoclassical transport code PENTA for the optimized quasi-helically symmetric (QHS) configuration. To understand whether Reynolds stress might explain the discrepancy, fluctuating floating potential measurements are made at two locations in the torus corresponding to the low field and high field sides of the device. The measurements at the two locations show clear evidence of a gradient in the Reynolds stress. However, the resulting flow due to the gradient in the stress is found to be large and in opposite directions for the two locations. This makes an estimation of the flux surface average using a small number of measurement locations impractical from an experimental perspective. These results neither confirm nor rule out whether Reynolds stress plays an important role for the QHS configuration. Measurements made in configurations with the quasi-symmetry degraded show even larger flows and greater deviations from the neoclassically calculated velocity profiles than the QHS configuration while the fluctuation magnitudes are reduced. Lastly, for these configurations in particular, the Reynolds stress is most likely not responsible for the additional momentum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

IMPROVED VARIABLE STAR SEARCH IN LARGE PHOTOMETRIC DATA SETS: NEW VARIABLES IN CoRoT FIELD LRa02 DETECTED BY BEST II

The CoRoT field LRa02 has been observed with the Berlin Exoplanet Search Telescope II (BEST II) during the southern summer 2007/2008. A first analysis of stellar variability led to the publication of 345 newly discovered variable stars. Now, a deeper analysis of this data set was used to optimize the variability search procedure. Several methods and parameters have been tested in order to improve the selection process compared to the widely used J index for variability ranking. This paper describes an empirical approach to treat systematic trends in photometric data based upon the analysis of variance statistics that can significantly decrease the rate of false detections. Finally, the process of reanalysis and method improvement has virtually doubled the number of variable stars compared to the first analysis by Kabath et al. A supplementary catalog of 272 previously unknown periodic variables plus 52 stars with suspected variability is presented. Improved ephemerides are given for 19 known variables in the field. In addition, the BEST II results are compared with CoRoT data and its automatic variability classification.

79 ASTRONOMY AND ASTROPHYSICS↗

A GENERAL RELATIVISTIC NULL HYPOTHESIS TEST WITH EVENT HORIZON TELESCOPE OBSERVATIONS OF THE BLACK HOLE SHADOW IN Sgr A*

The half opening angle of a Kerr black hole shadow is always equal to (5 ± 0.2)GM/Dc{sup 2}, where M is the mass of the black hole and D is its distance from the Earth. Therefore, measuring the size of a shadow and verifying whether it is within this 4% range constitutes a null hypothesis test of general relativity. We show that the black hole in the center of the Milky Way, Sgr A*, is the optimal target for performing this test with upcoming observations using the Event Horizon Telescope (EHT). We use the results of optical/IR monitoring of stellar orbits to show that the mass-to-distance ratio for Sgr A* is already known to an accuracy of ∼4%. We investigate our prior knowledge of the properties of the scattering screen between Sgr A* and the Earth, the effects of which will need to be corrected for in order for the black hole shadow to appear sharp against the background emission. Finally, we explore an edge detection scheme for interferometric data and a pattern matching algorithm based on the Hough/Radon transform and demonstrate that the shadow of the black hole at 1.3 mm can be localized, in principle, to within ∼9%. All these results suggest that our prior knowledge of the properties of the black hole, of scattering broadening, and of the accretion flow can only limit this general relativistic null hypothesis test with EHT observations of Sgr A* to ≲10%.

79 ASTRONOMY AND ASTROPHYSICS↗

A Multiwavelength Look at the GJ 9827 System: No Evidence of Extended Atmospheres in GJ 9827b and d from HST and CARMENES Data

GJ 9827 is a bright star hosting a planetary system with three transiting planets. As a multiplanet system with planets that sprawl within the boundaries of the radius gap between terrestrial and gaseous planets, GJ 9827 is an optimal target to study the evolution of the atmospheres of close-in planets with a common evolutionary history and their dependence from stellar irradiation. Here we report on the Hubble Space Telescope (HST) and CARMENES transit observations of GJ 9827 planets b and d. We performed a stellar and ISM characterization from the ultraviolet HST spectra, obtaining fluxes for Lyα and Mg ii of F(Lyα) = (5.42{sub −0.75}{sup +0.96}) × 10{sup −13} erg cm{sup −2} s{sup −1} and F(Mgii) = (5.64 ± 0.24) × 10{sup −14} erg cm{sup −2} s{sup −1}. We also investigated a possible absorption signature in Lyα in the atmosphere of GJ 9827b during a transit event from HST spectra, as well as Hα and He i signature for the atmosphere of GJ 9827b and d from CARMENES spectra. We found no evidence of an extended atmosphere in either of the planets. This result is also supported by our analytical estimations of mass loss based on the measured radiation fields for all three planets of this system, which led to a mass-loss rate of 0.4, 0.3, and 0.1 planetary masses per Gyr for GJ 9827b, c, and d, respectively. These values indicate that the planets could have lost their volatiles quickly in their evolution and probably do not retain an atmosphere at the current stage.

47 OTHER INSTRUMENTATION↗

Optimization of the Configuration of Pixilated Detectors Based on the Sgabbib-Nyquist Theory for the X-ray Spectroscopy of Hot Tokamak Plasmas

This paper describes an optimization of the detector configuration, based on the Shannon-Nyquist theory, for two major x-ray diagnostic systems on tokamaks and stellarators: x-ray imaging crystal spectrometers and x-ray pinhole cameras. Typically, the spectral data recorded with pixilated detectors are oversampled, meaning that the same spectral information could be obtained using fewer pixels. Using experimental data from Alcator C-Mod, we quantify the degree of oversampling and propose alternate uses for the redundant pixels for additional diagnostic applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimization of the Configuration of Pixilated Detectors Based on the Shannon-Nyquist Theory for the X-Ray Spectroscopy of Hot Tokamak Plasmas

This paper describes an optimization of the detector configuration, based on the Shannon-Nyquist theory, for two major x-ray diagnostic systems on tokamaks and stellarators: x-ray imaging crystal spectrometers and x-ray pinhole cameras. Typically, the spectral data recorded with pixilated detectors are oversampled, meaning that the same spectral information could be obtained using fewer pixels. Using experimental data from Alcator C-Mod, we quantify the degree of oversampling and propose alternate uses for the redundant pixels for additional diagnostic applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control of stellarator properties illustrated by a Wendelstein7-X equilibrium

Plasma properties in stellarators can be controlled by changing the externally produced magnetic field normal to the unperturbed-plasma surface. However, a change in the amplitude of only a few spatial distributions of the externally produced normal field has a linear effect on the plasma properties. The number and the form of the external field distributions to which the plasma has a linear sensitivity is important for determining (a) the flexibility that can be obtained in given device, (b) the required features of coils, so simpler coils sets can be designed, and (c) the degree to which plasma properties can be individually optimized. Features of the linear response are illustrated using the bootstrap current and the effective ripple in the magnetic field strength for a particular equilibrium of the Wendelstein7-X stellarator. For the effective ripple, the available control is determined by just a few distributions of the external magnetic field even though the ripple is a function of position. For the total bootstrap current, the available control is given by a single distribution of the external magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two color multichannel heterodyne interferometer set up for high spatial resolution electron density profile measurements in TJ-II

A high spatial resolution two color [CO{sub 2}, {lambda}=10.6 {mu}m/Nd:YAG (Nd:YAG denotes neodymium-doped yttrium aluminum garnet), and {lambda}=1.064 {mu}m] expanded-beam multichannel heterodyne interferometer has been installed on the TJ-II stellarator. Careful design of the optical system has allowed complete control on the evolution of both Gaussian beams along the interferometer, as well as the evaluation and optimization of the spatial resolution to be expected in the measurements. Five CO{sub 2} (measurement) channels and three Nd:YAG (vibration compensation) channels have been used to illuminate the plasma with a probe beam of 100 mm size. An optimum interpolation method has been applied to recover both interferometric phasefronts prior to mechanical vibration subtraction. The first results of the installed diagnostic are presented in this paper.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optimization of operation of a three-electrode gyrotron with the use of a flow-type calorimeter

Results are presented for measurements of microwave power of the Borets-75/0.8 gyrotron with recovery of residual electron energy, which were performed by a flow-type calorimeter. This gyrotron is a part of the ECR plasma heating complex put into operation in 2010 at the L-2M stellarator. The new calorimeter is capable of measuring microwave power up to 0.5 MW. Monitoring of the microwave power makes it possible to control the parameters of the gyrotron power supply unit (its voltage and current) and the magnetic field of the cryomagnet in order to optimize the gyrotron operation and arrive at maximum efficiency.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

An automated design process for short pulse laser driven opacity experiments

Stellar-relevant conditions can be reached by heating a buried layer target with a short pulse laser. Previous design studies of iron buried layer targets found that plasma conditions are dominantly controlled by the laser energy while the accuracy of the inferred opacity is limited by tamper emission and optical depth effects. In this paper, we developed a process to simultaneously optimize laser and target parameters to meet a variety of design goals. We explored two sets of design cases: a set focused on conditions relevant to the upper radiative zone of the sun (electron temperatures of 200 to 400 eV and densities greater than 1/10 of solid density) and a set focused on reaching temperatures consistent with deep within the radiative zone of the sun (500 to 1000 eV) at a fixed density. We found optimized designs for iron targets and determined that the appropriate dopant, for inferring plasma conditions, depends on the goal temperature: magnesium for up to 300 eV, aluminum for 300 to 500 eV, and sulfur for 500 to 1000 eV. The optimal laser energy and buried layer thickness increase with goal temperature. The accuracy of the inferred opacity is limited to between 11% and 31%, depending on the design. Finally, overall, short pulse laser heated iron experiments reaching stellar-relevant conditions have been designed with consideration of minimizing tamper emission and optical depth effects while meeting plasma condition and x-ray emission goals.

36 MATERIALS SCIENCE↗