Search NASA⌕ Search

SEARCH · Search NASA

Results for “strain effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Interplay of orbital effects and nanoscale strain in topological crystalline insulators

Orbital degrees of freedom can have pronounced effects on the fundamental properties of electrons in solids. In addition to influencing bandwidths, gaps, correlation strength and dispersion, orbital effects have been implicated in generating novel electronic and structural phases. Here we show how the orbital nature of bands can result in non-trivial effects of strain on band structure. We use scanning–tunneling microscopy to study the effects of strain on the electronic structure of a heteroepitaxial thin film of a topological crystalline insulator, SnTe. By studying the effects of uniaxial strain on the band structure we find a surprising effect where strain applied in one direction has the most pronounced influence on the band structure along the perpendicular direction. Our theoretical calculations indicate that this effect arises from the orbital nature of the conduction and valence bands. Our results imply that a microscopic model capturing strain effects must include a consideration of the orbital nature of bands.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain-stress study of Al x Ga 1–x N/AlN heterostructures on c-plane sapphire and related optical properties

This work presents a systematic study of stress and strain of Al x Ga 1-x N/AlN with composition ranging from GaN to AlN, grown on a c-plane sapphire by metal-organic chemical vapor deposition, using synchrotron radiation high-resolution X-ray diffraction and reciprocal space mapping. The c-plane of the Al x Ga 1-x N epitaxial layers exhibits compressive strain, while the alpha-plane exhibits tensile strain. The biaxial stress and strain are found to increase with increasing Al composition, although the lattice mismatch between the Al x Ga 1-x N and the buffer layer AlN gets smaller. A reduction in the lateral coherence lengths and an increase in the edge and screw dislocations are seen as the Al x Ga 1-x N composition is varied from GaN to AlN, exhibiting a clear dependence of the crystal properties of Al x Ga 1-x N on the Al content. The bandgap of the epitaxial layers is slightly lower than predicted value due to a larger tensile strain effect on the alpha-axis compared to the compressive strain on the c-axis. Raman characteristics of the Al x Ga 1-x N samples exhibit a shift in the phonon peaks with the Al composition. The effect of strain on the optical phonon energies of the epitaxial layers is also discussed

36 MATERIALS SCIENCE↗

Rubber friction on road surfaces: Experiment and theory for low sliding speeds

We study rubber friction for tire tread compounds on asphalt road surfaces. The road surface topographies are measured using a stylus instrument and atomic force microscopy, and the surface roughness power spectra are calculated. The rubber viscoelastic modulus mastercurves are obtained from dynamic mechanical analysis measurements and the large-strain effective modulus is obtained from strain sweep data. The rubber friction is measured at different temperatures and sliding velocities, and is compared to the calculated data obtained using the Persson contact mechanics theory. We conclude that in addition to the viscoelastic deformations of the rubber surface by the road asperities, there is an important contribution to the rubber friction from shear processes in the area of contact. The analysis shows that the latter contribution may arise from rubber molecules (or patches of rubber) undergoing bonding-stretching-debonding cycles as discussed in a classic paper by Schallamach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting metal–metal interactions. I. The influence of strain on nanoparticle and metal adlayer stabilities

Strain-engineering of bimetallic nanomaterials is an important design strategy for developing new catalysts. In this paper, we introduce an approach for including strain effects into a recently introduced, density functional theory (DFT)-based alloy stability model. The model predicts adsorption site stabilities in nanoparticles and connects these site stabilities with catalytic reactivity and selectivity. Strain-based dependencies will increase the model’s accuracy for nanoparticles affected by finite-size effects. In addition to the stability of small nanoparticles, strain also influences the heat of adsorption of epitaxially grown metal-on-metal adlayers. In this respect, we successfully benchmark the strain-including alloy stability model with previous experimentally determined trends in the heats of adsorption of Au and Cu adlayers on Pt (111). For these systems, our model predicts stronger bimetallic interactions in the first monolayer than monometallic interactions in the second monolayer. We explicitly quantify the interplay between destabilizing strain effects and the energy gained by forming new metal–metal bonds. While tensile strain in the first Cu monolayer significantly destabilizes the adsorption strength, compressive strain in the first Au monolayer has a minimal impact on the heat of adsorption. Hence, this study introduces and, by comparison with previous experiments, validates an efficient DFT-based approach for strain-engineering the stability, and, in turn, the catalytic performance, of active sites in bimetallic alloys with atomic level resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Density-of-States Effective Mass and Strained Endotaxial Nanostructures in Sb-Doped Pb 0.97 Cd 0.03 Te Thermoelectric Alloys

Here we report that CdTe alloying and Sb doping increase the density-of-states effective mass and introduce endotaxial nanostructuring in n-type PbTe, resulting in enhanced thermoelectric performance. A prior theoretical prediction for the presence of resonance states in the conduction band of this system, however, could not be confirmed. An amount of 3 mol % CdTe alloying widens the band gap of PbTe by 50%, leading to enhanced carrier effective mass and Seebeck coefficient. This effect is even more pronounced at high temperatures where the solubility of CdTe increases. At 800 K, when the carrier concentration is the same (4 × 10 19 cm -3 ), the Seebeck coefficient of CdTe-alloyed PbTe is -195 μV K -1 , 16% higher than that of the Cd-free control sample (-168 μV K -1 ). Sb doping considerably increases the electron concentration of Pb 0.97 Cd 0.03 Te, giving rise to optimized power factors of ~17 μW cm -1 K -2 at 800 K. More importantly, Sb induces strained endotaxial nanostructures evenly distributed in the matrix. Furthermore, these Sb-rich nanostructures account for the ~40% reduction in the lattice thermal conductivity over the whole measured temperature range. As a result, a maximum ZT of 1.2 is attained at 750 K in 0.5 mol % Sb-doped Pb 0.97 Cd 0.03 Te alloys.

36 MATERIALS SCIENCE↗

Edge effects on band gap energy in bilayer 2H-MoS{sub 2} under uniaxial strain

The potential of ultrathin MoS{sub 2} nanostructures for applications in electronic and optoelectronic devices requires a fundamental understanding in their electronic structure as a function of strain. Previous experimental and theoretical studies assume that an identical strain and/or stress state is always maintained in the top and bottom layers of a bilayer MoS{sub 2} film. In this study, a bilayer MoS{sub 2} supercell is constructed differently from the prototypical unit cell in order to investigate the layer-dependent electronic band gap energy in a bilayer MoS{sub 2} film under uniaxial mechanical deformations. The supercell contains an MoS{sub 2} bottom layer and a relatively narrower top layer (nanoribbon with free edges) as a simplified model to simulate the as-grown bilayer MoS{sub 2} flakes with free edges observed experimentally. Our results show that the two layers have different band gap energies under a tensile uniaxial strain, although they remain mutually interacting by van der Waals interactions. The deviation in their band gap energies grows from 0 to 0.42 eV as the uniaxial strain increases from 0% to 6% under both uniaxial strain and stress conditions. The deviation, however, disappears if a compressive uniaxial strain is applied. These results demonstrate that tensile uniaxial strains applied to bilayer MoS{sub 2} films can result in distinct band gap energies in the bilayer structures. Such variations need to be accounted for when analyzing strain effects on electronic properties of bilayer or multilayered 2D materials using experimental methods or in continuum models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thickness dependent transport and magnetotransport in CSD grown La{sub 0.7}Pb{sub 0.3}MnO{sub 3} manganite films

Highlights: {yields} Thickness dependent transport and MR of CSD grown La{sub 0.7}Pb{sub 0.3}MnO{sub 3} manganite films. {yields} Chemical Solution Deposition (CSD) is the low cost, simple and easy to handle. {yields} Prominent strain effect in lower thickness films. {yields} 3D lattice strain and microstructure govern the transport and MR in the films. {yields} Low temperature resistivity minima is also affected by 3D lattice strain. -- Abstract: We report the effect of film thickness on transport and magnetotransport in La{sub 0.7}Pb{sub 0.3}MnO{sub 3} (LPMO) manganite films grown on single crystalline LaAlO{sub 3} substrate using chemical solution deposition (CSD) technique. AFM measurements show the island type grain growth responsible for the strain at the film-substrate interface, while structural studies using XRD shows the presence of thickness dependent compressive strain in the films which modifies the transport and magnetotransport in LPMO/LAO films. The observation of low temperature resistivity minima behavior in all the LPMO films has been explained in the context of electron-electron scattering mechanism. The ZFC-FC magnetization measurements show the glassy state behavior below T{sub min}.

36 MATERIALS SCIENCE↗

Characterization of strain and its effects on ferromagnetic nickel nanocubes

We report on the interplay of magnetic properties and intrinsic strain in ferromagnetic nickel nanocubes with cubic anisotropy. Via coherent x-ray diffraction imaging we observed compressive stress at the bottom surface of these cubes. The nanocubes with {100} facets described and imaged in this study were synthesized using a single-step CVD process. Micromagnetic simulations predict the presence of vortices at remanence in the absence of strain. The effects of strain resulting from the compressive stress on the magnetic response of the ferromagnetic cubes is investigated. We observe that measured intrinsic strain is too low to change the magnetic anisotropy of ferromagnetic cubes but topological behavior of magnetic vortices is sensitive to even this low range of strain.

36 MATERIALS SCIENCE↗

CO-CO coupling on Cu facets: Coverage, strain and field effects

We present a DFT study on the effect of coverage, strain, and electric field on CO-CO coupling energetics on Cu (100), (111), and (211). Our calculations indicate that CO-CO coupling is facile on all three facets in the presence of a cation-induced electric field in the Helmholtz plane, with the lowest barrier on Cu(100). The CO dimerization pathway is therefore expected to play a role in C 2 formation at potentials negative of the Cu potential of zero charge, corresponding to CO 2 /CO reduction conditions at high pH. Both increased *CO coverage and tensile strain further improve C-C coupling energetics on Cu (111) and (211). Since CO dimerization is facile on all 3 Cu facets, subsequent surface hydrogenation steps may also play an important role in determining the overall activity towards C 2 products. Adsorption of *CO, *H, and *OH on the 3 facets were investigated with a Pourbaix analysis. Here, the (211) facet has the largest propensity to co-adsorb *CO and *H, which would favor surface hydrogenation following CO dimerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of biaxial strain on the improper multiferroicity in h – LuFe O 3 films studied using the restrained thermal expansion method

Elastic strain is potentially an important approach in tuning the properties of the improperly multiferroic hexagonal ferrites, the details of which have however been elusive due to the experimental difficulties. Employing the method of restrained thermal expansion, we have studied the effect of isothermal biaxial strain in the basal plane of h-LuFeO 3 (001) films. The results indicate that a compressive biaxial strain significantly enhances the K 3 structural distortion (the order parameter of the improper ferroelectricity), and the effect is larger at higher temperatures. The compressive biaxial strain and the enhanced K 3 structural distortion together, cause an increase in the electric polarization and a reduction in the canting of the weak ferromagnetic moments in h-LuFeO 3 , according to our first principle calculations. These findings are important for understanding the strain effect as well as the coupling between the lattice and the improper multiferroicity in h-LuFeO 3 . Finally, the experimental elucidation of the strain effect in h-LuFeO 3 films also suggests that the restrained thermal expansion can be a viable method to unravel the strain effect in many other thin film materials.

36 MATERIALS SCIENCE↗

Effects of applied strain on nanoscale self-interstitial cluster formation in BCC iron

The effect of applied strains on the configurational evolution of self-interstitial clusters in BCC iron (Fe) is explored with atomistic simulations. A novel cluster configuration is discovered at low temperatures (<600 K), which consists of <110> dumbbells and <111> crowdions in a specific configuration, resulting in an immobile defect. The stability and diffusion of this cluster at higher temperatures is explored. In addition, an anisotropy distribution factor of a particular [hkl] interstitial loop within the family of < hkl > loops is calculated as a function of strain. Here, the results show that loop anisotropy is governed by the angle between the stress direction and the orientation of the <111> crowdions in the loop, and directly linked to the stress induced preferred nucleation of self-interstitial atoms.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Strain and localization effects in InGaAs(N) quantum wells: Tuning the magnetic response

We investigated effects of localization and strain on the optical and magneto-optical properties of diluted nitrogen III–V quantum wells theoretically and experimentally. High-resolution x-ray diffraction, photoluminescence (PL), and magneto-PL measurements under high magnetic fields up to 15 T were performed at low temperatures. Bir-Pikus Hamiltonian formalism was used to study the influence of strain, confinement, and localization effects. The circularly polarized magneto-PL was interpreted considering localization aspects in the valence band ground state. An anomalous behavior of the electron-hole pair magnetic shift was observed at low magnetic fields, ascribed to the increase in the exciton reduced mass due to the negative effective mass of the valence band ground state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hardening of A6111-T4 Aluminum Alloy at Large Strains and Its Effect on Sheet Forming Operations

In a number of sheet metal stamping and joining processes, the material undergoes large plastic deformation exceeding the range of plastic strain achievable in a standard tensile test prior to material plastic instability. In order to extend the range of effective strains, the multistep rolling process was employed which enabled prestraining of aluminum sheet above 2.0 of true strain. Tensile testing of rolled samples was used to identify the flow stress corresponding to the level of prestrain: By varying the prestrain level, several data points were obtained for the studied flow curve. The numerical simulation using Abaqus software for the cold rolling process of aluminum strips confirmed that majority of the strip is deformed in plane strain compression condition. Performed simulation of the LDH test determined that earlier fracture might occur if the curve obtained via rolling–tensile testing approach is used versus traditional power law approximation and Voce law approximation. The results of simulation for the multistep drawing of a cylindrical cup revealed possible wrinkling in the die entry area during redrawing stage of the process if the rolling–tensile testing flow curve is employed.

36 MATERIALS SCIENCE↗

Size–strain separation in diffraction line profile analysis

Separation of size and strain effects on diffraction line profiles has been studied in a round robin involving laboratory instruments and synchrotron radiation beamlines operating with different radiation, optics, detectors and experimental configurations. The studied sample, an extensively ball milled iron alloy powder, provides an ideal test case, as domain size broadening and strain broadening are of comparable size. The high energy available at some synchrotron radiation beamlines provides the best conditions for an accurate analysis of the line profiles, as the size–strain separation clearly benefits from a large number of Bragg peaks in the pattern; high counts, reliable intensity values in low-absorption conditions, smooth background and data collection at different temperatures also support the possibility to include diffuse scattering in the analysis, for the most reliable assessment of the line broadening effect. However, results of the round robin show that good quality information on domain size distribution and microstrain can also be obtained using standard laboratory equipment, even when patterns include relatively few Bragg peaks, provided that the data are of good quality in terms of high counts and low and smooth background.

Scardi, P. (ORCID:0000000310973917)↗

Thermal strain-induced dielectric anisotropy in Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} thin films grown on silicon-based substrates

Dielectric properties of Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} (BST) thin films, which were prepared on silicon-based substrates by ion beam sputtering and postdeposition annealing method, were systematically investigated in different electrode configurations of metal-insulator-metal and coplanar interdigital capacitors. It was found that a large dielectric anisotropy exists in the films with better in-plane dielectric properties (higher dielectric permittivity and tunability) than those along the out-of-plane direction. The observed anisotropic dielectric responses are explained qualitatively in terms of a thermal strain effect that is related to dissimilar film strains along the in-plane and out-of-plane directions. Another reason for the dielectric anisotropy is due to different influences of the interfacial low-dielectric layer between the BST film and the substrate (metal electrode).

36 MATERIALS SCIENCE↗