Search NASA⌕ Search

SEARCH · Search NASA

Results for “stratiform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Electrical and kinematic structure of an Oklahoma mesoscale convective system

The case study examines the dynamics and kinematics of a mesoscale convective system (MCS) by comparing its meteorological parameters with in situ electrical measurements. Conventional MCS characteristics are reported including a rear inflow jet, wake low, and a bipolar cloud-to-ground pattern, but some nonclassical conditions are also reported. Horizontally long cloud-to-ground electrical strikes are noted which demonstrate that cloud-to-ground electrical data alone cannot entirely characterize stratiform electrification in MCSs.

Hunter, Steven M.↗

Meso-beta scale numerical simulation studies of terrain-induced jet streak mass/momentum perturbations

Work performed during the report period is summarized. The first numerical experiment which was performed on the North Carolina Supercomputer Center's CRAY-YMP machine during the second half of FY92 involved a 36 hour simulation of the CCOPE case study. This first coarse-mesh simulation employed the GMASS model with a 178 x 108 x 32 matrix of grid points spaced approximately 24 km apart. The initial data was comprised of the global 2.5 x 2.5 degree analyses as well as all available North American rawinsonde data valid at 0000 UTC 11 July 1981. Highly-smoothed LFM-derived terrain data were utilized so as to determine the mesoscale response of the three-dimensional atmosphere to weak terrain forcing prior to including the observed highly complex terrain of the northern Rocky Mountain region. It was felt that the model should be run with a spectrum of terrain geometries, ranging from observed complex terrain to no terrain at all, to determine how crucial the terrain was in forcing the mesoscale phenomena. Both convection and stratiform (stable) precipitation were not allowed in this simulation so that their relative importance could be determined by inclusion in forth-coming simulations. A full suite of planetary boundary layer forcing was allowed in the simulation, including surface sensible and latent heat fluxes employing the Blakadar PBL formulation. The details of this simulation, which in many ways could be considered the control simulation, including the important synoptic-scale, meso-alpha scale, and meso-beta scale circulations is described. These results are compared to the observations diagnosed by Koch and his colleagues as well as hypotheses set forth in the project proposal for terrain-influences upon the jet stream and their role in the generation of mesoscale wave phenomenon. The fundamental goal of the analyses being the discrimination among background geostrophic adjustment, terrain influences, and shearing instability in the initiation and maintainance of mesoscale internal wave phenomena. Based upon these findings, FY93 plans are discussed. A review of linear theory and theoretical modeling of a geostrophic zonal wind anomaly is included.

Lin, Yuh-Lang↗

The formation of ore mineral deposits on the Moon: A feasibility study

Most of the ore deposits on Earth are the direct result of formation by hydrothermal solutions. Analogous mineral concentrations do not occur on the Moon, however, because of the absence of water. Stratified ore deposits form in layered instrusives on Earth due to fractional crystallization of magma and crystal settling of high-density minerals, particularly chromium in the mineral chromite. We have evaluated the possibility of such mineral deposition on the Moon, based upon considerations of 'particle settling velocities' in lunar vs. terrestrial magmas. A first approximation of Stoke's Law would seem to indicate that the lower lunar gravity (1/6 terrestrial) would result in slower crystal settling on the Moon. However, the viscosity of the silicate melt is the most important factor affecting the settling velocity. The viscosities of typical lunar basaltic melts are 10-100 times less than their terrestrial analogs. These lower viscosities result from two factors: (1) lunar basaltic melts are typically higher in FeO and lower in Al2O3, Na2O, and K2O than terrestrial melts; and (2) lunar igneous melts and phase equilibria tend to be 100-150 C higher than terrestrial, largely because of the general paucity of water and other volatile phases on the Moon. Therefore, particle settling velocities on the Moon are 5-10 times greater than those on Earth. It is highly probable that stratiform ore deposits similar to those on Earth exist on the Moon. The most likely ore minerals involved are chromite, ilmenite, and native FeNi metal. In addition, the greater settling velocities of periodotite in lunar magmas indicate that the buoyancy effects of the melt are less than on Earth. Consequently, the possibility is considerably less than on Earth of deep-seated volcanism transporting upper mantle/lower crustal xenoliths to the surface of the Moon, such as occurs in kimberlites on Earth.

Taylor, Lawrence A.↗

Electric and kinematic structure of the Oklahoma mesoscale convective system of 7 June 1989

Balloon soundings of electric field in Oklahoma mesoscale convective systems (MCS) were obtained by the National Severe Storms Laboratory in the spring of 1989. This study focuses on a sounding made in the rearward edge of an MCS stratiform rain area on 7 June 1989. Data from Doppler radars, a lightning ground-strike location system, satellite, and other sources is used to relate the mesoscale attributes of the MCS to the observed electric-field profile.

Hunter, Steven M.↗

An intercomparison of three satellite infrared rainfall techniques over Japan and surrounding waters

Three satellite infrared techniques of increasing complexity for the estimation of rainfall are compared: (1) the GOES precipitation index (Arkin, 1979, 1983), (2) the Negri-Adler-Wetzel (Negri et al., 1984) technique, and (3) the convective-stratiform technique (CST), described by Adler and Negri (1988). It is shown that all three techniques performed poorly in estimating the rain maxima over southeastern Japan associated with shallow orographic warm rain systems. However, when the data set was limited to the ocean-only points, the CST method performed best, with the lowest bias, the lowest rms, and the highest correlation. Daily rainfall estimates had rms errors of almost 200 percent of the mean, and negative biases of about 50 percent of the mean.

Negri, Andrew J.↗

Preliminary results from multiparameter airborne rain radar measurement in the western Pacific

Preliminary results are presented from multiparameter airborne radar measurements of tropical storms. The experiment was conducted in the western Pacific in September 1990 with the NASA DC-8 aircraft that was equipped with a dual-wavelength radar at X and Ka bands and several microwave radiometers. The modification to dual-polarization at X-band radar enabled measurements of the linear depolarization ratio (LDR). Vertical profiles of dual-polarization and dual-frequency observables for an example of stratiform rain and three examples of convective rain cells are examined. It is shown that at nadir incidence the LDR measurement often can be used to distinguish the phase states of the hydrometeors and to identify the melting layer. In addition to the information concerning particle shape and orientation from LDR, the ratio of the radar reflectivity factors in two frequency bands (X and Ka bands) provides insight into particle size. The capabilities of dual-wavelength and dual-polarization radar in the identification of particle size and phase will be important considerations in the design of future spaceborne weather radars.

Kumagai, Hiroshi↗

The radiative budgets of a tropical mesoscale convective system during the EMEX-STEP-AMEX experiment. I - Observations. II - Model results

The spatial radiation heating budget associated with tropical mesoscale convective systems (MCSs) is studied and the change of this heating/budget throughout the life cycle of such a cloud system is investigated. The movements of an EMEX 9 cloud cluster are described. The vertical structure of the cluster contains two types of imbedded convection: an upright vertical structure and a pronounced rearward slope with vertical extent of 14.5 km or more and a horizontal scale of about 40 km. The cloud base and cloud top altitude in the stratiform region are of the order of 4.8 km and 15-16 km, respectively. The upward and downward solar flux profiles suggest very little solar heating in these regions. A tropical MCS that occurred during the EMEX Mission 9 is simulated, and the simulation is shown to broadly agree with the observations. The simulation results, which are reported in detail, show how tropical mesoscale cloud systems provide an effective radiative heat source for the tropical atmosphere.

Wong, Takmeng↗

Dual-polarization characteristics of the radar ocean return in the presence of rain

Experimental data are presented on the polarimetric and dual-wavelength characteristics of the ocean surface in the presence of rain. To explain a portion of the variability observed in scatter plots under rain conditions, a storm model is used that incorporates measured drop size distributions. The fairly large variability indicates that effects of drop size distribution and the presence of partially melted particles can introduce a significant error in the estimate of attenuation. This effect is especially significant in the case of a 10-GHz radar under high rain rates. A surface reference method at this frequency will tend to overestimate the rain attenuation unless melting layer attenuation is properly taken into account. Observations of the cross-polarization return in stratiform rain over an ocean surface show three distinct components. Two of these correspond to aspherical, nonaligned particles in the melting layer seen in the direct and mirror-image returns. The remaining part depends both on the off-nadir depolarization by the surface and on the rain medium. A possible mechanism for this latter effect is the bistatic scattering from the rain to the surface.

Meneghini, R.↗

Hydrometeor discrimination in melting layer using multiparameter airborne radar measurement

Results from a multiparameter airborne radar/radiometer experiment (the Typhoon experiment) are presented. The experiment was conducted in the western Pacific with the NASA DC-8 aircraft, in which a dual-wavelength at X-band and Ka-band and dual-polarization at X-band radar was installed. The signatures of dBZ(X), dBZ(Ka), LDR (linear depolarization ratio) at X-band and DZ=dBZ(X)-dBZ(Ka) are discussed for the data obtained in the penetration of the typhoon Flo. With emphasis on discrimination of hydrometeor particles, some statistical features of the brightband in stratiform rain are discussed.

Kumagai, H.↗

Radar depolarization signatures of rain in cumulus clouds measured with a dual-frequency air-borne radar

Experimental data are presented on dual-wavelength scattering characteristics of subtropical rain observed during the convection and precipitation/electrification (CaPE) experiment. Linear depolarization ratios (LDRs) are calculated at both X-band and Ka-band channels. In stratiform rain, the cross-polarized return signal is generally below the noise level except within the melting layer where the maximum LDR at both frequencies is typically between -12 and -10 dB. In convective rain the range profiles of the LDR in X-band and those in Ka-band do not coincide. The X-band LDR values in convective rain typically remain smaller than -25 dB at high altitudes and take somewhat larger values of -25 to -15 dB at low altitudes. The Ka-band LDR values, in contrast, typically increase with radar range, sometimes reaching a level of -3 dB just before the cross-polarized signal falls below the noise level. Such high values of LDR in Ka-band are most likely attributable to multiple scattering effects.

Iguchi, Toshio↗

A study of the threshold method utilizing raingage data

The threshold method for estimation of area-average rain rate relies on determination of the fractional area where rain rate exceeds a preset level of intensity. Previous studies have shown that the optimal threshold level depends on the climatological rain-rate distribution (RRD). It has also been noted, however, that the climatological RRD may be composed of an aggregate of distributions, one for each of several distinctly different synoptic conditions, each having its own optimal threshold. In this study, the impact of RRD variations on the threshold method is shown in an analysis of 1-min rainrate data from a network of tipping-bucket gauges in Darwin, Australia. Data are analyzed for two distinct regimes: the premonsoon environment, having isolated intense thunderstorms, and the active monsoon rains, having organized convective cell clusters that generate large areas of stratiform rain. It is found that a threshold of 10 mm/h results in the same threshold coefficient for both regimes, suggesting an alternative definition of optimal threshold as that which is least sensitive to distribution variations. The observed behavior of the threshold coefficient is well simulated by assumption of lognormal distributions with different scale parameters and same shape parameters.

Short, David A.↗

Physical retrieval of precipitation water contents from Special Sensor Microwave/Imager (SSM/I) data. Part 1: A cloud ensemble/radiative parameterization for sensor response (report version)

The physical retrieval of geophysical parameters based upon remotely sensed data requires a sensor response model which relates the upwelling radiances that the sensor observes to the parameters to be retrieved. In the retrieval of precipitation water contents from satellite passive microwave observations, the sensor response model has two basic components. First, a description of the radiative transfer of microwaves through a precipitating atmosphere must be considered, because it is necessary to establish the physical relationship between precipitation water content and upwelling microwave brightness temperature. Also the spatial response of the satellite microwave sensor (or antenna pattern) must be included in the description of sensor response, since precipitation and the associated brightness temperature field can vary over a typical microwave sensor resolution footprint. A 'population' of convective cells, as well as stratiform clouds, are simulated using a computationally-efficient multi-cylinder cloud model. Ensembles of clouds selected at random from the population, distributed over a 25 km x 25 km model domain, serve as the basis for radiative transfer calculations of upwelling brightness temperatures at the SSM/I frequencies. Sensor spatial response is treated explicitly by convolving the upwelling brightness temperature by the domain-integrated SSM/I antenna patterns. The sensor response model is utilized in precipitation water content retrievals.

Olson, William S.↗

Forecast model applications of retrieved three dimensional liquid water fields

Forecasts are made for tropical storm Emily using heating rates derived from the SSM/I physical retrievals described in chapters 2 and 3. Average values of the latent heating rates from the convective and stratiform cloud simulations, used in the physical retrieval, are obtained for individual 1.1 km thick vertical layers. Then, the layer-mean latent heating rates are regressed against the slant path-integrated liquid and ice precipitation water contents to determine the best fit two parameter regression coefficients for each layer. The regression formulae and retrieved precipitation water contents are utilized to infer the vertical distribution of heating rates for forecast model applications. In the forecast model, diabatic temperature contributions are calculated and used in a diabatic initialization, or in a diabatic initialization combined with a diabatic forcing procedure. Our forecasts show that the time needed to spin-up precipitation processes in tropical storm Emily is greatly accelerated through the application of the data.

Raymond, William H.↗

Multiple scattering effects on the Linear Depolarization Ratio (LDR) measured during CaPE by a Ka-band air-borne radar

Air-borne radar measurements of thunderstorms were made as part of the CaPE (Convection and Precipitation/Electrification) experiment in Florida in July 1991. The radar has two channels, X-band (10 GHz) and Ka-band (34.5 GHz), and is capable of measuring cross-polarized returns as well as co-polarized returns. In stratiform rain, the cross-polarized components can be observed only at the bright band region and from the surface reflection. The linear depolarization ratios (LDR's) measured at X-band and Ka-band at the bright band are nearly equal. In convective rain, however, the LDR in Ka-band often exceeds the X-band LDR by several dB, and sometimes by more than 10 dB, reaching LDR values of up to -5 dB over heavy convective rain. For randomly oriented hydrometeors, such high LDR values cannot be explained by single scattering from non-spherical scattering particles alone. Because the LDR by single backscatter depends weakly on the wavelength, the difference between the Ka-band and X-band LDR's suggests that multiple scattering effects prevail in the Ka-band LDR. In order to test this inference, the magnitude of the cross-polarized component created by double scattering was calculated using the parameters of the airborne radar, which for both frequencies has beamwidths of 5.1 degrees and pulse widths of 0.5 microsecond. Uniform rain beyond the range of 3 km is assumed.

Iguchi, Toshio↗

Breaking Kelvin-Helmholtz waves and cloud-top entrainment as revealed by K-band Doppler radar

Radars have occasionally detected breaking Kelvin-Helmholtz (KH) waves under clear-air conditions in the atmospheric boundary layer and in the free troposphere. However, very few direct measurements of such waves within clouds have previously been reported and those have not clearly documented wave breaking. In this article, we present some of the most detailed and striking radar observations to date of breaking KH waves within clouds and at cloud top and discuss their relevance to the issue of cloud-top entrainment, which is believed to be important in convective and stratiform clouds. Aircraft observations reported by Stith suggest that vortex-like circulations near cloud top are an entrainment mechanism in cumuliform clouds. Laboratory and modeling studies have examined possibility that KH instability may be responsible for mixing at cloud top, but direct observations have not yet been presented. Preliminary analyses shown here may help fill this gap. The data presented in this paper were obtained during two field projects in 1991 that included observations from the NOAA Wave Propagation Laboratory's K-band Doppler radar (wavelength = 8.7 mm) and special rawinsonde ascents. The sensitivity (-30 dBZ at 10 km range), fine spatial resolution (375-m pulse length and 0.5 degrees beamwidth), velocity measurement precision (5-10 cm s-1), scanning capability, and relative immunity to ground clutter make it sensitive to non-precipitating and weakly precipitating clouds, and make it an excellent instrument to study gravity waves in clouds. In particular, the narrow beam width and short pulse length create scattering volumes that are cylinders 37.5 m long and 45 m (90 m) in diameter at 5 km (10 km) range. These characteristics allow the radar to resolve the detailed structure in breaking KH waves such as have been seen in photographic cloud images.

Martner, Brooks E.↗

Radiatively driven interactions between stratocumulus and synoptic waves

Quasi-geostrophic disturbances on a midlatitude beta-plane channel forced by radiative heating perturbations due to synoptic-scale variations of low-level stratiform cloud are considered. The longitudinal phase of the cloud is linked to that of the low-level streamfunction. Cloudiness is wavelike with cooling above cloudy areas that decreases exponentially with height. No perturbation cooling occurs above cloud-free areas. Two background flows are considered: one is constant and the other has a jet centered near the tropopause. Forced linear steady waves are found. Though infinitesimal amplitude disturbances are considered, the problem is nonlinear because of the coupling between cloud and winds. The resulting structures are sensitive to the phase shift between cloud and streamfunction with strongest coupling for cloud to the west of surface troughs. The waves have vertical scales on the order of the troposphere depth. The stationary structures capture the summertime pattern of stratocumulus off California and its linkage to the mid-Pacific ridge. When zonal-mean cloud cooling is allowed, the mean westerlies are strengthened in the northern half of the channel near the lower boundary. Synoptic-scale amplitudes respond to the mean cloud cooling by increasing (decreasing) just above the cloud in the northern (southern) part of the channel.

Clark, John H. E.↗

Multilevel cloud retrieval using multispectral HIRS and AVHRR data: Nighttime oceanic analysis

A multispectral, multiresolution (MSMR) method is developed for analyzing scenes of overlapping cloud layers. The MSMR method is applied to data from the NOAA 11 advanced very high resolution radiometer (AVHRR) and the high-resolution infrared radiometer sounder (HIRS-2). The data are from a nighttime oceanic scene in which a semitransparent cirrus veil overlays a large-scale stratus cloud. Low-cloud and clear-sky radiances are determined using a spatial coherence technique. Middle to upper level cloud pressures and radiances are estimated from HIRS-2 15 micrometer CO2 band radiometric data. The MSMR method improves the interpretation of a nighttime, oceanic scene containing thin cirrus over a large-scale stratiform cloud. If, for example, the same scene is analyzed using only the AVHRR 10.8 micrometer channel, the accompanying retrieved cloud heights are found to be between the cirrus and stratus cloud heights and are incorrectly identified as midlevel altostratus clouds. Theoretical radiative transfer model results for both water droplet spheres and randomly oriented hexagonal ice crystals are compared to observed AVHRR brightness temperature differences (BTD) between the 3.7- and 10.8 micrometer channels (BTD(sup 34)) and between the 10.8- and 12- micrometer channels (BTD(sup 45)) to distinguish among the effects of cloud optical depth, particle size, and phase for both single-layer clouds and overlapping two-layer clouds. Theoretical BTD calculations are used to estimate the range of effective particle sizes for eac h cloud layer. The data for the cirrus in the case study region near Bermuda are consistent with theoretical results for relatively small randomly oriented hexagonal ice crystals. The observed BTD(sup 34) and BTD(sup 45) values are lower for the cirrus above a lower-level cloud than for single-level cirrus with no underlying cloud. In certain cases the BTD analysis provides a way to distinguish between clouds composed of supercooled water droplets rather than ice particles. Analysis of nighttime data permits determination of stratus infrared optical depths smaller than 4.

Baum, Bryan A.↗