Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Strain Enhanced Functionality in a Bottom-Up Approach Enabled 3D Super-Nanocomposites

The ability to control nanoparticle size, concentration, and distribution in epitaxial nanocomposite films has been a formidable challenge in the synthesis of nanostructured composite materials. In this paper, a novel 3D super-nanocomposite (3D-sNC) architecture is successfully demonstrated by integrating superlattice and vertically aligned nanocomposite structures. In the 3D-sNC architecture, the feature size and distribution of the nanocylinders such as the height/lateral dimension and the vertical/lateral spacing of nanocylinders can be precisely controlled. The microstructure parameters such as nanocylinder height and spacing modulated interfacial area control the lattice strain, which further tunes the magnetotransport property. These results demonstrate that 3D-sNC is a simple and yet effective architecture to achieve controlled functionalities via the precise control of nanocylinder size, spacing, concentration, and distribution. Lastly, such a 3D-sNC structure can be used to design advanced nanostructures with desired physical properties for a variety of material systems.

36 MATERIALS SCIENCE↗

Low-Dimensional Contact Layers for Enhanced Perovskite Photodiodes

Controlling defects and energy-band alignments are of paramount importance to the development of high-performance perovskite-based photodiodes. Yet, concurrent improvements in interfacial contacts and defect reduction simply by tailoring bottom contacts have not been investigated. An effective strategy is reported that can simultaneously improve energy-band alignments and structural defects by introducing low-dimensional contact (LDC) layers at the bottom interface. It is found that LDC-based perovskites considerably suppress undesirable structural defects induced by microstrains, resulting in reduced nonradiative recombination centers and improved carrier lifetimes. Additionally, the resulting LDC-based interface structures help block minority carrier injection from the electrodes by forming built-in electric fields. As a consequence, LDC-based perovskite photodiodes showed improved light detection capabilities. Finally, the result opens an avenue to yield highly efficient photodiodes.

36 MATERIALS SCIENCE↗

The role of precursor modification on the production of graphite foam

A high-conductivity graphite foam developed at Oak Ridge National Laboratory (ORNL) owes its unique thermal properties to the highly aligned graphitic structure along the cell walls. The material exhibits a peak in thermal conductivity at temperatures like that of highly ordered natural graphite, indicating the foam has an extremely graphitic nature. This paper explores the manufacturing process to identify processing conditions that most affect the properties of the foam, such that the production of the foam can be easily tailored to different applications. This paper examines processing conditions from the precursor preparation as well as additives to the precursor, such as graphene, on the resulting foam structure and thermal properties. It was found that heat treating the precursor mesophase to increase melt viscosity and decrease off gassing during foaming decreased the thermal conductivity of the final foams, however, it resulted in smaller pores. Additions of graphene platelets decreases the thermal conductivity of the foams while simultaneously decreasing the pore size as well. In conclusion, these tradeoffs are evident and present the manufacturer options to tailor the foams.

36 MATERIALS SCIENCE↗

Parallel diffusion operator for magnetized plasmas with improved spectral fidelity

Diffusive transport processes in magnetized plasmas are highly anisotropic, with fast parallel transport along the magnetic field lines sometimes faster than perpendicular transport by orders of magnitude. This constitutes a major challenge for describing non-grid-aligned magnetic structures in Eulerian (grid-based) simulations. Here, the present paper describes and validates a new method for parallel diffusion in magnetized plasmas based on the anti-symmetry representation [Halpern and Waltz, Phys. Plasmas 25, 060703 (2018)]. In the anti-symmetry formalism, diffusion manifests as a flow operator involving the logarithmic derivative of the transported quantity. Qualitative plane wave analysis shows that the new operator naturally yields better discrete spectral resolution compared to its conventional counterpart. Numerical simulations comparing the new method against existing finite difference methods are carried out, showing significant improvement. In particular, we find that combining anti-symmetry with finite differences in diagonally staggered grids essentially eliminates the so-called “artificial numerical diffusion” that affects conventional finite difference and finite volume methods.

Anisotropic diffusion↗

In situ study on radiation response of tungsten manufactured by laser powder bed fusion

Tungsten (W) produced by laser powder bed fusion (LPBF) was examined by in situ Krypton (Kr) ion irradiation at 400 °C up to 2.52 displacements per atom (dpa) to investigate its radiation response. Dislocation loops with identical Burgers vectors form aligned raft structures, inducing significant grain misorientation accumulation. Defect saturation was observed beyond 0.36 dpa, marked by constant loop density and raft spacing. WO 3 nanoparticles are found in the as-printed matrix and served as efficient defect sinks. Dislocation loops were absorbed at the W/WO 3 interface, facilitating defect annihilation and suppressing defect accumulation. In conclusion, these findings highlight the role of LPBF microstructure and oxide interfaces in mediating radiation-induced defect evolution, offering insights for designing radiation tolerant W-based materials.

Defect sink↗

Understanding the Species Selectivity of Myeloid Cell Leukemia-1 (Mcl-1) Inhibitors

To test for on target toxicity of a new chemical entity, it is important to have comparable binding affinities of the compound in the target proteins from humans and the test species. To evaluate our myeloid cell leukemia-1 (Mcl-1) inhibitors, we tested them against rodent Mcl-1 and found a significant loss of binding affinity when compared to that seen with human Mcl-1. To understand the affinity loss, we used sequence alignments and structures of human Mcl-1/inhibitor complexes to identify the important differences in the amino acid sequences. One difference is human L246 (F226 in rat, F227 in mouse) in the ligand binding pocket. Mutating rat F226 to a Leu restores affinity, but the mouse F227L mutant still has a ligand affinity that is lower than that of human Mcl-1. Another mutation of mouse F267, located ~12 Å from the ligand pocket, to the human/rat cysteine, F267C, improved the affinity and combined with F227L resulted in a mutant mouse protein with a binding affinity similar to that of human Mcl-1. To help understand the structural components of the affinity loss, we obtained an X-ray structure of a mouse Mcl-1/inhibitor complex and identified how the residue changes reduced compound complementarity. Finally, we tested Mcl-1 of other preclinical animal models (canine, monkey, rabbit, and ferret) that are identical to humans in terms of these two residues and found that their Mcl-1 bound our compounds with affinities comparable to that of human Mcl-1. Furthermore, these results have implications for understanding ligand selectivity for similar proteins and for the interpretation of preclinical toxicology studies with Mcl-1 inhibitors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Linear-Scaling Coupled Cluster with Perturbative Triple Excitations: The Divide–Expand–Consolidate CCSD(T) Model

Here, we propose a reformulation of the traditional (T) triples correction to the coupled cluster singles and doubles (CCSD) energy in terms of local Hartree–Fock (HF) orbitals such that its structural form aligns with our recently developed linear-scaling divide–expand–consolidate (DEC) coupled cluster family of local correlation methods. In a DEC-CCSD(T) calculation, a basis of local occupied and virtual HF orbitals is used to partition the correlated calculation on the full system into a number of independent atomic fragment and pair fragment calculations, each performed within a truncated set of the complete orbital space. In return, this leads to a massively parallel algorithm for the evaluation of the DEC-CCSD(T) correlation energy, which formally scales linearly with the size of the full system and has a tunable precision with respect to a conventional CCSD(T) calculation via a single energy-based input threshold. The theoretical developments are supported by proof of concept DEC-CCSD(T) calculations on a series of medium-sized molecular systems.

Algorithms↗

Solvent Processing and Ionic Liquid-Enabled Long-Range Vertical Ordering in Block Copolymer Films with Enhanced Film Stability

Rapid and reliable processing methods for forming ordered block copolymer (BCP) materials with low defect density in a thin film geometry are required for many nanotechnology applications. Vertically aligned BCP structures, in particular, have applications ranging from nanolithography for electronics and photonics to nanoporous membranes for water remediation and novel batteries for flexible electronics. However, the attainment of nearly complete vertical orientational order of the BCP ordered phase remains challenging. Solvent-based techniques, such as direct immersion annealing (DIA) and solvent vapor annealing (SVA), have immense potential for these applications of BCP films, as it allows for tuning of their thermodynamic, structural, and chain mobility driven kinetic properties. We first demonstrate that DIA, using a judicious choice of binary solvent mixtures along with a relatively hydrophobic ionic liquid (IL), induces the rapid vertical ordering in polystyrene-b-polymethylmethacrylate (PS-PMMA) block copolymer in lamellar films. The IL establishes synergy to the binary solvent mixture of toluene and heptane to 1 create a near-neutral solvent environment for attaining the vertical microstructure of the BCP. Next, we show that IL can suppress the de-wetting of the PS-PMMA films to achieve long-range order using SVA in cylindrical films for long annealing times. Both vertical and horizontal morphology is attained in these films by selecting different solvent environments. Furthermore, attaining enhanced vertical and horizontal BCP structure with long-range defect-free order by tuning solvent quality and using additives like IL can render them useful for many nanotech applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Guided Lithium Metal Deposition and Improved Lithium Coulombic Efficiency through Synergistic Effects of LiAsF 6 and Cyclic Carbonate Additives

Spatial and morphology control over lithium (Li) metal nucleation/growth, as well as improving Li Coulombic efficiency (CE) are of the most challenging issues for rechargeable Li metal batteries. Here, we report that LiAsF6 and vinylene carbonate (VC) can work synergistically to address these challenges. It is revealed that AsF6- can be reduced to Li3As and LiF, which can act as seeds for Li growth and form a robust solid electrolyte interphase (SEI) layer, respectively. The addition of VC is critical because it not only enables uniform AsF6- reduction by passivating the defect sites on Cu substrate, but also improves the SEI layer flexibility during the reductive polymerization process. As a result, highly compact, uniform and dendrite-free Li film with vertically aligned columns structure can be obtained with greatly increased Li CE, and the Li metal batteries using the electrolyte with both LiAsF6 and VC additives can have much improved cycle life.

Coulombic efficiency↗

Atomistic Insights Into the Oriented Attachment of Tunnel-Based Oxide Nanostructures

Controlled synthesis of nanomaterials is one of the grand challenges facing materials scientists. In particular, how tunnel-based nanomaterials aggregate during synthesis while maintaining their well-aligned tunneled structure is not fully understood. Here, we describe the atomistic mechanism of oriented attachment (OA) during solution synthesis of tunneled α-MnO2 nanowires based on a combination of in situ liquid cell transmission electron microscopy (TEM), aberration-corrected scanning TEM with subangstrom spatial resolution, and first-principles calculations. It is found that primary tunnels (1 × 1 and 2 × 2) attach along their common {110} lateral surfaces to form interfaces corresponding to 2 × 3 tunnels that facilitate their short-range ordering. The OA growth of α-MnO2 nanowires is driven by the stability gained from elimination of {110} surfaces and saturation of Mn atoms at {110}-edges. During this process, extra [MnOx] radicals in solution link the two adjacent {110} surfaces and bond with the unsaturated Mn atoms from both surface edges to produce stable nanowire interfaces. Our results provide insights into the controlled synthesis and design of nanomaterials in which tunneled structures can be tailored for use in catalysis, ion exchange, and energy storage applications.

interface↗

River Delta Morphotypes Emerge From Multiscale Characterization of Shorelines

Abstract Delta shoreline structure has long been hypothesized to encode information on the relative influence of fluvial, wave, and tidal processes on delta formation and evolution. We introduce here a novel multiscale characterization of shorelines by defining three process‐informed morphological metrics. We show that this characterization yields self‐emerging classes of morphologically similar deltas, that is, delta morphotypes, and also predicts the dominant forcing of each morphotype. Then we show that the dominant forcings inferred from shoreline structure generally align with those estimated via relative sediment fluxes, while positing that misalignments arise from spatiotemporal heterogeneity in deltaic sediment fluxes not captured in their estimates. The proposed framework for shoreline characterization advances our quantitative understanding of how shoreline features reflect delta forcings, and may aid in deciphering paleoclimate from images of ancient deposits and projecting delta morphologic response to changes in sediment fluxes.

Vulis, L.↗

Self-oscillating synchronematic colloids

Self-oscillators that sustain periodic dynamics under constant input are ubiquitous in natural and engineered systems, where their interactions enable spatiotemporal coordination among many individual units. New forms of organization can emerge when these self-oscillating units are free to move and rotate, coupling their spatial arrangement and alignment with their oscillation frequencies and phases. Here, we report experiments and simulations on populations of Quincke colloids that behave as self-oscillating units with position, orientation, frequency, and phase. Depending on the initial distribution, these active oscillators spontaneously organize into distinct collective states characterized by temporal synchronization and directional alignment, which we term synchronematic order. In fluid-like clusters, this order is short-ranged and decays over a length scale set by the competition between hydrodynamic interactions and athermal noise. In crystalline clusters, these interactions drive flobal synchronization and circular alignment-synchronematic crystals-whose collective frequency increases with cluster size due to non-reciprocal interactions. Our results establish self-oscillating colloids as a model system for active oscillatory matter and reveal fundamental principles by which synchronization, alignment, and structure co-emerge, offering new pathways for designing adaptive, frequency-tunable materials.

colloids↗

Integration of lead-free ferroelectric on HfO2/Si (100) for high performance non-volatile memory applications

We introduce a novel lead-free ferroelectric thin film (1-x)BaTiO3-xBa(Cu1/3Nb2/3)O3 (x 5 0.025) (BT-BCN) integrated on to HfO2 buffered Si for non-volatile memory (NVM) applications. Piezoelectric force microscopy (PFM), x-ray diffraction, and high resolution transmission electron microscopy were employed to establish the ferroelectricity in BT-BCN thin films. PFM study reveals that the domains reversal occurs with 1806 phase change by applying external voltage, demonstrating its effectiveness for NVM device applications. X-ray photoelectron microscopy was used to investigate the band alignments between atomic layer deposited HfO2 and pulsed laser deposited BT-BCN films. Programming and erasing operations were explained on the basis of band-alignments. The structure offers large memory window, low leakage current, and high and low capacitance values that were easily distinguishable even after ,106 s, indicating strong charge storage potential. This study explains a new approach towards the realization of ferroelectric based memory devices integrated on Si platform and also opens up a new possibility to embed the system within current complementary metal-oxide-semiconductor processing technology.

42 ENGINEERING↗

Characterization of DWARF14 Genes in Populus

Strigolactones are a new class of plant hormones regulating shoot branching and symbiotic interactions with arbuscular mycorrhizal fungi. Studies of branching mutants in herbaceous plants have identified several key genes involved in strigolactone biosynthesis or signaling. The strigolactone signal is perceived by a member of the α/β-fold hydrolase superfamily, known as DWARF14 (D14). However, little is known about D14 genes in the woody perennial plants. Here we report the identification of D14 homologs in the model woody plant Populus trichocarpa. We showed that there are two D14 homologs in P. trichocarpa, designated as PtD14a and PtD14b that are over 95% similar at the amino acid level. Expression analysis indicated that the transcript level of PtD14a is generally more abundant than that of PtD14b. However, only PtD14a was able to complement Arabidopsis d14 mutants, suggesting that PtD14a is the functional D14 ortholog. Amino acid alignment and structural modeling revealed substitutions of several highly conserved amino acids in the PtD14b protein including a phenylalanine near the catalytic triad of D14 proteins. Ultimately, we find this study lays a foundation for further characterization of strigolactone pathway and its functions in the woody perennial plants.

60 APPLIED LIFE SCIENCES↗

Achieving nano-gold stability through rational design

When Au is subdivided to the nanoscale its reactivity changes from an inert nature to one of incredible reactivity which is not replicated by other catalysts. When dispersed onto metal oxides such as TiO 2 , nano-Au has shown high reactivities for a multitude of reduction and oxidation reactions of industrial importance with potential and current uses such as, CO oxidation, NOx reduction, purification of hydrogen for fuel cells, water gas shift reactions, abatement of volatile organic compounds (VOC's) as well as pollution and emission control systems such as autocatalysts. However, many industrially important reactions and applications operate under harsh conditions where the catalyst is exposed to high temperatures and further needs to operate for extended periods of time. These conditions cause Au nanoparticle sintering whereby small, highly active clusters form large clusters which are catalytically inactive. For this reason, research into stabilizing Au nanoparticles has abounded with a goal of producing durable, thermally stable catalysts for industrial applications. Here we show a durable, thermally stable Au–TiO 2 catalyst which has been developed by rational design. The catalyst exhibits a 3-dimensional, radially aligned nanorod structure, already locked into the thermodynamically stable polymorph, via a scalable and facile synthesis, with Au nanoparticles isolated on the support structure. As the Au nanoparticles are highly stable the new catalyst is able to maintain light-off for CO oxidation below 115 °C even after multiple cycles at 800 °C. This ability of the catalyst to resist multiple thermal cycles to high temperature while remaining active at low temperatures shows promise for various industrial applications. The thermal stability of the catalyst is investigated and characterized through morphological and structural studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling of Crystallizing Polymer Melts in Electrospinning

In electrospinning, applied electric field elongates a charged fluid jet to produce nanofibers. While most polymer melts result in highly-aligned amorphous structures, some fast-crystallizing polymers such as Nylon can produce semi-crystalline fibers, and by controlling this crystallinity the mechanical properties of electrospun fibers can be tailored. Short inflight residence times, high extensional forces, and radially-uniform stress distributions in electrospinning result in the dominance of flow induced crystallization (FIC) and a nearly 1D microstructure. We present our FIC model based on Kolmogoroff's equation, Hoffman-Lauritzen theory, and key modifications from molecular scale insights to account for flow effects. The model behavior is compared to the conventional Ziabicki FIC model using Nylon-6,6 as the model polymer.

36 MATERIALS SCIENCE↗