Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural heterogeneity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Galileo Probe Measurements of Thermal and Solar Radiation Fluxes in the Jovian Atmosphere

The Galileo probe net flux radiometer (NFR) measured radiation fluxes in Jupiter's atmosphere from about 0.44 to 14 bars, using five spectral channels to separate solar and thermal components. Onboard calibration results confirm that the NFR responded to radiation approximately as expected. NFR channels also responded to a superimposed thermal perturbation, which can be approximately removed using blind channel measurements and physical constraints. Evidence for the expected NH3 cloud was seen in the spectral character of spin-induced modulations of the direct solar beam signals. These results are consistent with an overlying cloud of small NH3 ice particles (0.5-0.75 microns in radius) of optical depth 1.5-2 at 0.5 microns. Such a cloud would have so little effect on thermal fluxes that NFR thermal channels provide no additional constraints on its properties. However, evidence for heating near 0.45 bar in the NFR thermal channels would seem to require either an additional opacity source beyond this small-particle cloud, implying a heterogeneous cloud structure to avoid conflicts with solar modulation results, or a change in temperature lapse rate just above the probe measurements. The large thermal flux levels imply water vapor mixing ratios that are only 6% of solar at 10 bars, but possibly increasing with depth, and significantly subsaturated ammonia at pressures less than 3 bars. If deep NH3 mixing ratios at the probe entry site are 3-4 times ground-based inferences, as suggested by probe radio signal attenuation, then only half as much water is needed to match NFR observations. No evidence of a water cloud was seen near the 5-bar level. The 5-microns thermal channel detected the presumed NH4SH cloud base near 1.35 bars. Effects of this cloud were also seen in the solar channel upflux measurements but not in the solar net fluxes, implying that the cloud is a conservative scatterer of sunlight. The minor thermal signature of this cloud is compatible with particle radii near 3 gm, but it cannot rule out smaller particles. Deeper than about 3 bars, solar channels indicate unexpectedly large absorption of sunlight at wavelengths longer than 0.6 microns, which might be due to unaccounted-for absorption by NH3 between 0.65 and 1.5 microns.

Sromovsky, L. A.↗
NASA NTRS1998

Galileo Probe Measurements of Thermal and Solar Radiation Fluxes in the Jovian Atmosphere

The Galileo probe net flux radiometer (NFR) measured radiation fluxes in Jupiter's atmosphere from about 0.44 to 14 bars, using five spectral channels to separate solar and thermal components. Onboard calibration results confirm that the NFR responded to radiation approximately as expected. NFR channels also responded to a superimposed thermal perturbation, which can be approximately removed using blind channel measurements and physical constraints. Evidence for the expected NH3 cloud was seen in the spectral character of spin-induced modulations of the direct solar beam signals. These results are consistent with an overlying cloud of small NH3 ice particles (0.5-0.75 microns in radius) of optical depth 1.5-2 at 0.5 microns. Such a cloud would have so little effect on thermal fluxes that NFR thermal channels provide no additional constraints on its properties. However, evidence for heating near 0.45 bar in the NFR thermal channels would seem to require either an additional opacity source beyond this small-particle cloud, implying a heterogeneous-cloud structure to avoid conflicts with solar modulation results, or a change in temperature lapse rate just above the probe measurements. The large thermal flux levels imply water vapor mixing ratios that are only 6% of solar at 10 bars, but possibly increasing with depth, and significantly subsaturated ammonia at pressures less than 3 bars. If deep NH3 mixing ratios at the probe entry site are 3-4 times ground-based inferences, as suggested by probe radio signal attenuation, then only half as much water is needed to match NFR observations. No evidence of a water cloud was seen near the 5-bar level. The 5 microns thermal channel detected the presumed NH4SH cloud base near 1.35 bars. Effects of this cloud were also seen in the solar channel upflux measurements but not in the solar net fluxes, implying that the cloud is a conservative scatterer of sunlight. The minor thermal signature of this cloud is compatible with particle radii near 3 microns, but it cannot rule out smaller particles. Deeper than about 3 bars, solar channels indicate unexpectedly large absorption of sunlight at wavelengths longer than 0.6 microns, which might be due to unaccounted-for absorption by NH3 between 0.65 and 1.5 microns.

Sromovsky, L. A.↗
NASA NTRS2000

Significant Centers of Tectonic Activity as Identified by Wrinkle Ridges for the Western Hemisphere of Mars

The western hemisphere region of Mars has been the site of numerous scientific investigations regarding its tectonic evolution. For this region of Mars, the dominant tectonic region is the Tharsis province. Tharsis is characterized by an enormous system of radiating grabens and a circumferential system of wrinkle ridges. Past investigations of grabens associated with Tharsis have identified specific centers of tectonic activity. A recent structural analysis of the western hemisphere region of Mars which includes the Tharsis region, utilized 25,000 structures to determine the history of local and regional centers of tectonic activity based primarily on the spatial and temporal relationships of extensional features. This investigation revealed that Tharsis is more structurally complex (heterogeneous) than has been previously identified: it consists of numerous regional and local centers of tectonic activity (some are more dominant and/or more long lived than others). Here we use the same approach as Anderson et al. to determine whether the centers of tectonic activity that formed the extensional features also contributed to wrinkle ridge (compressional) formation.

Anderson, R.C.↗
NASA NTRS2017

Using Information from Rendezvous Missions for Best-Case Appraisals of Impact Damage to Planet Earth Caused by Natural Objects

The Asteroid Threat Assessment Project (ATAP), a part of NASAs Planetary Defense Coordination Office (PDCO) has the responsibility to appraise the range of surface damage by potential asteroid impacts on land or water. If a threat is realized, the project will provide appraisals to officials empowered to make decisions about potential mitigation actions. This paper describes a scenario for assessment of surface damage when characterization of an asteroid had been accomplished by a rendezvous mission that would be conducted by the international planetary defense community. It is shown that the combination of data from ground and in-situ measurements on an asteroid provides knowledge that can be used to pin-point its impact location and predict the level of devastation it would cause. The hypothetical asteroid 2017 PDC with a size range of 160 to 290 m in diameter to be discussed at the PDC 2017 is used as an example. In order of importance for appraising potential damage, information required is: (1) where will the surface impact occur? (2) what is the mass, shape and size of the asteroid and what is its entry state (speed and entry angle) at the 100 km atmospheric pierce point? And (3) is the asteroid a monolith or a rubble pile? If it is a rubble pile, what is its structure and heterogeneity from the surface and throughout its interior? Item (1) is of first order importance to determine levels of devastation (loss of life and infrastructure damage) because it varies strongly on the impact location. Items (2) and (3) are used as inputs for ATAPs simulations to define the level of surface hazards: winds, overpressure, thermal exposure; all created by the deposition of energy during the objects atmospheric flight, andor cratering. Topics presented in this paper include: (i) the devastation predicted by 2017 PDCs impact on land based on initial observations using ATAPs risk assessment capability, (ii) how information corresponding to items (1) to (3) could be obtained from a rendezvous mission, and (iii) how information from a rendezvous mission could be used, along with that from ground observations and data from the literature to provide input for a new risk analysis capability that is emerging from ATAPs research. It is concluded that this approach would result in the creation of an appraisal of the threat from 2017 PDC with the least uncertainty possible, herein called the best-case.

Asteroid Impact Appraisals↗
DOE OSTI2024

NuGraph2: A Graph Neural Network for Neutrino Event Reconstruction

Neutrino experiments are set to probe some of the most important open questions in physics, from CP violation and the nature of dark matter. The technology of choice for many of these experiments is the liquid argon time projection chamber (LArTPC). In current LArTPC experiments, reconstruction performance often represents a limiting factor for the sensitivity. New developments are therefore needed to unlock the full potential of LArTPC experiments. NuGraph2 is a state of the art Graph Neural Network for reconstruction of data in LArTPC experiments. NuGraph2 utilizes a heterogeneous graph structure, with separate subgraphs of 2D nodes (hits in each plane) connected across planes via 3D nodes (space points). The model provides a consistent description of the neutrino interaction across all planes. NuGraph2 is a multi-purpose network, with a common message-passing attention engine connected to multiple decoders with different classification or regression tasks. These include the classification of detector hits according to the particle type that produced them (semantic segmentation) and the separation of hits from the neutrino interaction from hits due to noise or cosmic-ray background. Additional decoders are being developed, performing tasks such as the regression of the neutrino interaction vertex position. Performance results will be presented based on publicly available samples from MicroBooNE. These include both physics performance metrics, achieving 95% accuracy for semantic segmentation and 98% classification of neutrino hits, as well as computational metrics for training and for inference on CPU or GPU. The status of the NuGraph integration in the LArSoft software framework will be presented, as well as initial studies about model interpretability and injection of domain knowledge.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

NuGraph2: A Graph Neural Network for Neutrino Event Reconstruction

Neutrino experiments are set to probe some of the most important open questions in physics, from CP violation and the nature of dark matter. The technology of choice for many of these experiments is the liquid argon time projection chamber (LArTPC). In current LArTPC experiments, reconstruction performance often represents a limiting factor for the sensitivity. New developments are therefore needed to unlock the full potential of LArTPC experiments. NuGraph2 is a state of the art Graph Neural Network for reconstruction of data in LArTPC experiments [https://arxiv.org/abs/2403.11872]. NuGraph2 utilizes a heterogeneous graph structure, with separate subgraphs of 2D nodes (hits in each plane) connected across planes via 3D nodes (space points). The model provides a consistent description of the neutrino interaction across all planes. NuGraph2 is a multi-purpose network, with a common message-passing attention engine connected to multiple decoders with different classification or regression tasks. These include the classification of detector hits according to the particle type that produced them (semantic segmentation) and the separation of hits from the neutrino interaction from hits due to noise or cosmic-ray background. Additional decoders are being developed, performing tasks such as the regression of the neutrino interaction vertex position. Performance results will be presented based on publicly available samples from MicroBooNE. These include both physics performance metrics, achieving 95% accuracy for semantic segmentation and 98% classification of neutrino hits, as well as computational metrics for training and for inference on CPU or GPU. The status of the NuGraph integration in the LArSoft software framework will be presented, as well as initial studies about model interpretability and injection of domain knowledge.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Impact of Asymmetric Microstructure on Ion Transport in Ti 3 C 2 T x Membranes

Consolidation or densification of low-dimensional MXene materials into membranes can result in the formation of asymmetric membrane structures. Nanostructural (short-range) and microstructural (long-range) heterogeneity can influence mass transport and separation mechanisms. Short-range structural dynamics include the presence of water confined between the 2D layers, while long-range structural properties include the formation of defects, micropores, and mesopores. Herein, it is demonstrated that structural heterogeneity in Ti 3 C 2 T x membranes fabricated via vacuum-assisted filtration significantly affects ion transport. Higher ion permeabilities are achieved when the dense “bottom” side of the membrane, rather than the porous “top” side, faces the feed solution. Characterization of the membrane reveals distinct differences in flake alignment, surface roughness, and porosity across the membrane. In conclusion, the directional dependence on permeability suggests that one region of the membrane experiences stronger internal concentration polarization, potentially suppressing permeability through the porous side of the membrane.

MXene↗
DOE OSTI2022

Probing the Influence of Multiscale Heterogeneity on Effective Properties of Graphite Electrodes

Graphite electrodes in the lithium-ion battery exhibit various particle shapes, including spherical and platelet morphologies, which influence structural and electrochemical characteristics. It is well established that porous structures exhibit spatial heterogeneity, and the particle morphology can influence transport properties. The impact of the particle morphology on the heterogeneity and anisotropy of geometric and transport properties has not been previously studied. Herein, this study characterizes the spatial heterogeneities of 18 graphite electrodes at multiple length scales by calculating and comparing the structural anisotropy, geometric quantities, and transport properties (pore-scale tortuosity and electrical conductivity). We found that the particle morphology and structural anisotropy play an integral role in determining the spatial heterogeneity of directional tortuosity and its dependency on pore-scale heterogeneity. Our analysis reveals that the magnitude of in-plane and through-plane tortuosity difference influences the multiscale heterogeneity in graphite electrodes.

25 ENERGY STORAGE↗
DOE OSTI2026

Elucidating Lithium Transport Mechanisms in Disordered LiF from Machine-Learning Molecular Dynamics Simulations

Lithium fluoride (LiF) is a ubiquitous component of solid- and cathode–electrolyte interphases, yet its functional role remains unclear under the structural and chemical heterogeneity typical of cycling batteries. Here, we systematically quantify how structural disorder, off-stoichiometry, and strain govern Li-ion transport in LiF. Using a machine-learning potential to enable extensive molecular-dynamics sampling, we compare crystalline and amorphous LiF, Li 0.95 F, and LiF 0.95 , and evaluate the impact of small homogeneous deformations. Defect-free crystalline LiF is effectively ion-blocking at 300−500 K, whereas amorphization generates free-volume–assisted percolation pathways that facilitates Li-ion diffusion. At elevated temperatures, thermodynamically driven crystallization disrupts these pathways, leading to non-Arrhenius behavior. In crystalline phases, Li deficiency activates vacancy-mediated diffusion, while in amorphous LiF, transport is governed primarily by network connectivity. Strain is found to have only a marginal effect on Li mobility in both crystalline and amorphous structures.

Batteries↗
DOE OSTI2023

Tree mortality during long-term droughts is lower in structurally complex forest stands

Increasing drought frequency and severity in a warming climate threaten forest ecosystems with widespread tree deaths. Canopy structure is important in regulating tree mortality during drought, but how it functions remains controversial. Here, we show that the interplay between tree size and forest structure explains drought-induced tree mortality during the 2012-2016 California drought. Through an analysis of over one million trees, we find that tree mortality rate follows a “negative-positive-negative” piecewise relationship with tree height, and maintains a consistent negative relationship with neighborhood canopy structure (a measure of tree competition). Trees overshadowed by tall neighboring trees experienced lower mortality, likely due to reduced exposure to solar radiation load and lower water demand from evapotranspiration. Our findings demonstrate the significance of neighborhood canopy structure in influencing tree mortality and suggest that re-establishing heterogeneity in canopy structure could improve drought resiliency. Our study also indicates the potential of advances in remote-sensing technologies for silvicultural design, supporting the transition to multi-benefit forest management.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Tailoring Cu-Zr gradient nanoglass structures: Influence of nanoparticle size and cooling rates on glass-glass interfaces

The study of gradient nanoglasses (GNGs) has gained attention due to their unique mechanical properties and potential applications in advanced materials. This study employs molecular dynamics simulations to synthesize a GNG using Cu-Zr metallic glass nanoparticles (NPs) sized from 3 to 15 nm. The NPs were produced by melting and quenching metallic clusters at a relatively slow quench rate of 10 9 K/s. The synthesis of GNG is elucidated along with the characterization of its heterogeneous metallic glass nanostructure. A seamless GNG structure is formed through cold compression of Cu 64 Zr 36 amorphous NPs of varying sizes. The influence of NP size on the GNG structure is investigated, utilizing deeply relaxed NPs, which exhibit a characteristic Cu segregation pattern on their surfaces. The results highlight an increase in structural heterogeneity due to heterogeneous mass transport and the development of local composition and density variations caused by Cu segregation at glass-glass interfaces (GGIs). A reduction in NP size is correlated with decreased Cu atomic displacements and local density at GGIs, suggesting that larger NPs may produce stronger GGIs. This research presents a novel methodology for synthesizing heterogeneous metallic glasses, demonstrating the capacity to control and customize nanostructure heterogeneity through the manipulation of NP sizes and cooling rates. Furthermore, these findings enhance our understanding of structural evolution during nanoglass synthesis and lay the foundation for further exploration in nanomaterial synthesis and characterization.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Modeling Heterogeneity in UO 2 Nanoparticles Using X‐ray Absorption Spectroscopy

Abstract EXAFS provides the capability to interrogate nanoparticle (NP) structure in atomistic detail without relying on long‐range crystallinity. There is a limitation in that EXAFS provides averaged structural information, making it difficult to separate a small amount of heterogeneous structure from bulk. In this work, models were developed to extract surface‐specific information from conventional EXAFS measurements collected on UO 2 NPs of varying size. Specifically, the surface terminating species of UO 2 NPs was determined from comparison of coordination numbers with geometric models while the origin of static disorder was interrogated from user‐defined simulations. Results show that the degree of oxygenation on the NP surface does not significantly deviate from bulk surface and that static disorder is highly enhanced in NP surface layers but cannot be attributed to surface relaxation effects alone. The approach described herein has the potential to be adapted to a range of inorganic NP systems to interrogate surface structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Microfibril orientation and compositional heterogeneity in fiber and vessel cell walls of poplar xylem studied by AFM-IR and SFG spectroscopy

Understanding the structural organization of cellulose microfibrils (CMFs) within individual plant cell walls is essential for connecting cell wall architecture to its mechanical and physiological functions. However, due to the complex hierarchical structure and nanoscale heterogeneity of cell walls, it remains technically challenging to resolve detailed compositional and orientational information at subcellular levels of individual cell walls. This study investigates the internal 3D structure, chemical composition, and sublayer organization of fiber and vessel cell walls in the xylem tissue of a two-year-old field-grown hybrid poplar tree (Populus alba × P. glandulosa) using photothermal atomic force microscopy coupled with infrared spectroscopy (AFM-IR) and sum frequency generation (SFG) hyperspectral microscopy. AFM-IR provided nanoscale chemical imaging, revealing localized compositional heterogeneity, including variations between adjacent cell walls and transitional layers beyond the traditional S1, S2, and S3 sublayers. SFG microscopy revealed that CMFs in fiber walls are highly aligned along the stem axis, consistent with their role in mechanical support, while vessel cell walls exhibited slightly tilted CMFs, reflecting their function in hydraulic transport. Together, these results offer new insights into cell-type-specific CMF organization and compositional gradients in hybrid poplar xylem. These findings highlight the structural and chemical complexity of secondary cell walls in woody plants and demonstrate the value of AFM-IR and SFG spectroscopy in elucidating plant cell wall architecture.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Structural and Dynamical Roles of Bound Polymer Chains in Rubber Reinforcement

The addition of nanofillers to rubber matrices is a powerful route to improve the mechanical properties. Here, we focus on a molecular understanding of basic mechanisms that are important for the reinforcement in rubbers. The key role in this process is ascribed to bound rubber (BR) that engages with the matrix as well as with adjacent nanofillers. To date, this understanding has been impeded by the lack of experimental tools to directly probe the BR chains buried in a polymer matrix composed of the same polymer. To tackle this challenge, we combine neutron scattering/spectroscopy techniques with isotope-labeling and molecular dynamics simulations. The system is a simplified carbon-black-filled polybutadiene. The combined experimental and computational results provide new insights into the local structural and dynamical heterogeneities of BR chains and their interactions with the matrix polymer, highlighting (i) the structural partition of the bound chains into three components (i.e., trains, loops, and tails) and their fractions; (ii) their dynamical hierarchies, i.e., the trains that remain immobile on the filler surface, the loops that are fairly large and hence allow the interdigitation of matrix chains, and the tails with their unique characteristics to reach far out into the matrix and entangle with matrix chains. These multiple roles of the constituent components of the BR chains promote the formation of a well-developed adhesive polymer–filler interface, enhancing the elastic property of a filled rubber. Finally, the comprehensive understanding derived and validated by the model rubber will be translatable to many other polymer nanocomposites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Tailoring the Reaction Heterogeneity for Robust Li‐Rich Cathodes

The practical application of Li-rich Mn-based layered oxides (LLO) cathode is hindered by severe capacity and voltage degradation resulting from severe oxygen release and irreversible phase transition. In this work, the reaction heterogeneity, which describes the spatially resolved electrochemical divergence within individual cathode particles, is engineered through compositional gradient design to couple Li + transport kinetics and the anion redox activity between particle interiors and surfaces. It is revealed that Co/Mn concentration gradient within particles creates heterogeneous phase content distribution and structural ordering, inducing surface-bulk reaction heterogeneity that significantly impacts the overall electrochemical performance. Specifically, Li 2 MnO 3 -poor and Co-enriched surface effectively mitigates the oxygen loss and enhances electrochemical reaction kinetics, benefited from the reduced surface redox reactivity and induced highly ordered intra-layered cationic arrangement. Meanwhile, the Li 2 MnO 3 -enriched core with slight Li/Ni intermixing provides high reversible capacity and strong mechanical stability. Consequently, the greatly enhanced anion redox reversibility, Li + diffusion dynamics, and structure stability endow LLO with exceptional electrochemical properties, showing a capacity retention of 86.0% and a reduced voltage decay of 0.518 mV per cycle after 500 cycles at 1 C. This work provides a valuable strategy to tailor the redox chemistry and achieve robust LLO.

25 ENERGY STORAGE↗
DOE OSTI2019

Influence of Coordination Environment of Anchored Single-Site Cobalt Catalyst on CO 2 Hydrogenation

Heterogeneous catalysts generally have a variety of active-site structures due to the innate heterogeneity of the surface,resulting in complicated correlations between activity and active-site structure. Single site heterogeneous cobalt catalysts with a uniform catalytic surface were utilized as a platform to probe surface sensitive reactions; in this case CO 2 hydrogenation. It was found that atomically isolated cobalt single sites, which exist solely in the tetrahedral Co 2+ coordination, exclusively form CO under typical CO 2 methanation conditions,while cobalt clusters yielded the highest rate of CO 2 reactionand began to form methane. Utilizing the principles of Ostwald Ripening to probe the ensemble effects for CO 2 hydrogenation, the transition from atomic isolation to small clusters of atoms to nanoparticles was explored. Furthermore, the chemical structure of the cobalt was elucidated primarily via X-Ray Absorption Spectroscopy (XANES/EXAFS) and X-Ray Photoelectron Spectroscopy (XPS).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗