Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface backgrounds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

The Radius of PSR J0740+6620 from NICER with NICER Background Estimates

We report a revised analysis for the radius, mass, and hot surface regions of the massive millisecond pulsar PSR J0740+6620, studied previously with joint fits to NICER and XMM-Newton data by Riley et al. (2021) and Miller et al. (2021). We perform a similar Bayesian estimation for the pulse-profile model parameters, except that instead of fitting simultaneously the XMM-Newton data, we use the best available NICER background estimates to constrain the number of photons detected from the source. This approach eliminates any potential issues in the cross-calibration between these two instruments, providing thus an independent check of the robustness of the analysis. The obtained neutron star parameter constraints are compatible with the already published results, with a slight dependence on how conservative the imposed background limits are. A tighter lower limit causes the inferred radius to increase, and a tighter upper limit causes it to decrease. We also extend the study of the inferred emission geometry to examine the degree of deviation from antipodality of the hot regions. We show that there is a significant offset to an antipodal spot configuration, mainly due to the non-half-cycle azimuthal separation of the two emitting spots. The offset angle from the antipode is inferred to be above 25° with 84% probability. This seems to exclude a centered-dipolar magnetic field in PSR J0740+6620.

79 ASTRONOMY AND ASTROPHYSICS↗

In-Situ Measurement of Chirality of Molecules and Molecular Assemblies with Surface Nonlinear Spectroscopy

Developments in quantitative measurement and analysis in nonlinear surface spectroscopy, namely, second harmonic generation linear dichroism (SHG-LD) and sum frequency generation vibrational spectroscopy linear dichroism (SFG-VS-LD), provide new opportunities for probing the surface chirality of monolayers and thin films. In this book chapter, the up-to-date theoretical background and experimental methodology, as well as examples and future perspectives on the developments with surface nonlinear spectroscopy in surface chirality studies are to be summarized and outlined for general readers.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantum extremal modular curvature: modular transport with islands

Modular Berry transport is a useful way to understand how geometric bulk information is encoded in the boundary CFT: the modular curvature is directly related to the bulk Riemann curvature. We extend this approach by studying modular transport in the presence of a non-trivial quantum extremal surface. Focusing on JT gravity on an AdS background coupled to a non-gravitating bath, we compute the modular curvature of an interval in the bath in the presence of an island: the Quantum Extremal Modular Curvature (QEMC). We highlight some important properties of the QEMC, most importantly that it is non-local in general. In an OPE limit, the QEMC becomes local and probes the bulk Riemann curvature in regions with an island. Our work gives a new approach to probe physics behind horizons.

2D Gravity↗

Regional water consumption for hydro and thermal electricity generation in the United States

Water is an essential resource for most electric power generation technologies. Thermal power plants typically require a large amount of cooling water whose evaporation is regarded to be consumed. Hydropower plants result in evaporative water loss from the large surface areas of the storing reservoirs. This paper estimated the regional water consumption factors (WCFs) for thermal and hydro electricity generation in the United States, because the WCFs of these power plants vary by region and water supply and demand balance are of concern in many regions. For hydropower, total WCFs were calculated using a reservoir’s surface area, state-level water evaporation, and background evapotranspiration. Then, for a multipurpose reservoir, a fraction of its WCF was allocated to hydropower generation based on the share of the economic valuation of hydroelectricity among benefits from all purposes of the reservoir. For thermal power plants, the variations in WCFs by type of cooling technology, prime mover technology, and by region were addressed. The results show that WCFs for electricity generation vary significantly by region. Finally, the generation-weighted average WCFs of thermoelectricity and hydropower are 1.25 (range of 0.18–2.0) and 16.8 (range of 0.67–1194) L/kWh, respectively, and the generation-weighted average WCF by the U.S. generation mix in 2015 is estimated at 2.18 L/kWh.

13 HYDRO ENERGY↗

A finite element procedure for radio-frequency sheath–plasma interactions based on a sheath impedance model

A finite element code that solves self-consistent radio-frequency (RF) sheath-plasma interaction problems is improved by incorporating a generalized sheath boundary condition in the macroscopic solution scheme. This sheath boundary condition makes use of a complex sheath impedance including both the sheath capacitance and resistance, which enables evaluation of not only the RF voltage across the sheath but also the power dissipation in the sheath. The newly developed finite element procedure is applied to cases where the background magnetic field is perpendicular to the sheath surface in one- and two-dimensional domains filled by uniform low- and high-density plasmas. The numerical results are compared with those obtained by employing the previous capacitive sheath model at a typical frequency for ion cyclotron heating used in fusion experiments. It is shown that for sheaths on the order of 100 V in a high-density plasma, localized RF power deposition can reach a level which causes material damage. It is also shown that the sheath-plasma wave resonances predicted by the capacitive sheath model do not occur when parameters are such that the generalized sheath impedance model substantially modifies the capacitive character of the sheath. Here, possible explanations for the difference in the maximum RF sheath voltage depending on the plasma density are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Review of Cluster Ion Beam Facilities and Technology

The paper reviews the development of cluster ion beam technology, including historical background, fundamental characteristics of cluster ion to solid surface interactions, emerging industrial applications, and identification of some of the significant events which occurred as the technology has evolved into what it is today. Processes employing ions of clusters comprised of a few hundred to many thousand atoms are now being developed into a new field of ion beam technology. Cluster-surface collisions produce important non-linear effects which are being applied to shallow junction formation, to etching and smoothing of semiconductors, metals, and dielectrics, to assisted formation of thin films with nano-scale accuracy, and to other surface modification applications.

43 PARTICLE ACCELERATORS↗

THE GHOSTS SURVEY. I. HUBBLE SPACE TELESCOPE ADVANCED CAMERA FOR SURVEYS DATA

We present an overview of the GHOSTS survey, the largest study to date of the resolved stellar populations in the outskirts of disk galaxies. The sample consists of 14 disk galaxies within 17 Mpc, whose outer disks and halos are imaged with the Hubble Space Telescope Advanced Camera for Surveys (ACS). In the first paper of this series, we describe the sample, explore the benefits of using resolved stellar populations, and discuss our ACS F606W and F814W photometry. We use artificial star tests to assess completeness and use overlapping regions to estimate photometric uncertainties. The median depth of the survey at 50% completeness is 2.7 mag below the tip of the red giant branch (TRGB). We comprehensively explore and parameterize contamination from unresolved background galaxies and foreground stars using archival fields of high-redshift ACS observations. Left uncorrected, these would account for 10{sup 0.65xF814W-19.0} detections per mag per arcsec{sup 2}. We therefore identify several selection criteria that typically remove 95% of the contaminants. Even with these culls, background galaxies are a significant limitation to the surface brightness detection limit which, for this survey, is typically V {approx} 30 mag arcsec{sup -2}. The resulting photometric catalogs are publicly available and contain some 3.1 million stars across 76 ACS fields, predominantly of low extinction. The uniform magnitudes of TRGB stars in these fields enable galaxy distance estimates with 2%-7% accuracy.

79 ASTRONOMY AND ASTROPHYSICS↗

A simple framework to characterize land aridity based on surface energy partitioning regimes

Land aridity is often characterized by the aridity index (AI), which does not account for land surface water-energy interactions that are crucially important in determining regional climate. Such interactions can be captured by the evaporative fraction (EF, ratio of evapotranspiration to available energy) regimes. As EF is subject to energy and water limitations in humid and dry areas, respectively, EF regimes may be used to characterize land aridity to account for the influence of complex land characteristics and their impact on water availability. Here, we propose a simple framework to characterize land aridity by statistically ranking the coupling strength between EF and surface energy and water terms. The framework is demonstrated using gridded data and compared with AI over the U.S. and China. Results show that regionalization of aridity zones based on EF regimes and a two-tiered classification scheme may provide information such as surface energy and water variability complementary to the background aridity depicted by AI, with implications for extreme events.

54 ENVIRONMENTAL SCIENCES↗

A method for measuring coherent elastic neutrino-nucleus scattering at a far off-axis high-energy neutrino beam target

We present an experimental method for measuring the process of coherent elastic neutrino-nucleus scattering (CENNS). This method uses a detector situated transverse to a high-energy neutrino beam production target. This detector would be sensitive to the low-energy neutrinos arising from decay-at-rest pions in the target. We discuss the physics motivation for making this measurement and outline the predicted backgrounds and sensitivities using this approach. We report a measurement of neutron backgrounds as found in an off-axis surface location of the Fermilab Booster Neutrino Beam (BNB) target. The results indicate that the Fermilab BNB target is a favorable location for a CENNS experiment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

TH-AB-BRA-12: Experimental Results From the First High-Field Inline MRI-Linac

Purpose: The pursuit of real-time image guided radiotherapy using optimal tissue contrast has seen the development of several hybrid MRI-treatment systems, high field and low field, and inline and perpendicular configurations. As part of a new MRI-Linac program, an MRI scanner was integrated with a linear accelerator to enable investigations of a coupled inline MRI-Linac system. This work describes our experimental results from the first high-field inline MRI-Linac. Methods: A 1.5 Tesla magnet (Sonata, Siemens) was located in a purpose built RF cage enabling shielding from and close proximity to a linear accelerator with inline orientation. A portable linear accelerator (Linatron, Varian) was installed together with a multi-leaf collimator (Millennium, Varian) to provide dynamic field collimation and the whole assembly built onto a stainless-steel rail system. A series of MRI-Linac experiments was performed to investigate: (1) image quality with beam on measured using a macropodine (kangaroo) ex vivo phantom; (2) the noise as a function of beam state measured using a 6-channel surface coil array and; (3) electron focusing measured using GafChromic film. Results: (1) The macropodine phantom image quality with the beam on was almost identical to that with the beam off. (2) Noise measured with a surface RF coil produced a 25% elevation of background noise when the radiation beam was on. (3) Film measurements demonstrated electron focusing occurring at the center of the radiation field. Conclusion: The first high-field MRI-Linac has been built and experimentally characterized. This system has allowed us to establish the efficacy of a high field in-line MRI-Linac and study a number of the technical challenges and solutions. Supported by the Australian National Health and Medical Research Council, the Australian Research Council, the Australian Cancer Research Foundation and the Health and Hospitals Fund.

60 APPLIED LIFE SCIENCES↗

Technical Note: Experimental results from a prototype high-field inline MRI-linac

Purpose: The pursuit of real-time image guided radiotherapy using optimal tissue contrast has seen the development of several hybrid magnetic resonance imaging (MRI)-treatment systems, high field and low field, and inline and perpendicular configurations. As part of a new MRI-linac program, an MRI scanner was integrated with a linear accelerator to enable investigations of a coupled inline MRI-linac system. This work describes results from a prototype experimental system to demonstrate the feasibility of a high field inline MR-linac. Methods: The magnet is a 1.5 T MRI system (Sonata, Siemens Healthcare) was located in a purpose built radiofrequency (RF) cage enabling shielding from and close proximity to a linear accelerator with inline (and future perpendicular) orientation. A portable linear accelerator (Linatron, Varian) was installed together with a multileaf collimator (Millennium, Varian) to provide dynamic field collimation and the whole assembly built onto a stainless-steel rail system. A series of MRI-linac experiments was performed to investigate (1) image quality with beam on measured using a macropodine (kangaroo) ex vivo phantom; (2) the noise as a function of beam state measured using a 6-channel surface coil array; and (3) electron contamination effects measured using Gafchromic film and an electronic portal imaging device (EPID). Results: (1) Image quality was unaffected by the radiation beam with the macropodine phantom image with the beam on being almost identical to the image with the beam off. (2) Noise measured with a surface RF coil produced a 25% elevation of background intensity when the radiation beam was on. (3) Film and EPID measurements demonstrated electron focusing occurring along the centerline of the magnet axis. Conclusions: A proof-of-concept high-field MRI-linac has been built and experimentally characterized. This system has allowed us to establish the efficacy of a high field inline MRI-linac and study a number of the technical challenges and solutions.

60 APPLIED LIFE SCIENCES↗

Confirmatory Survey of the Fuel Oil Tank Area - Humboldt Bay Power Plant, Eureka, California (Final Report)

During the period of February 14 to 15, 2012, ORISE performed radiological confirmatory survey activities for the former Fuel Oil Tank Area (FOTA) and additional radiological surveys of portions of the Humboldt Bay Power Plant site in Eureka, California. The radiological survey results demonstrate that residual surface soil contamination was not present significantly above background levels within the FOTA. Therefore, it is ORISE’s opinion that the radiological conditions for the FOTA surveyed by ORISE are commensurate with the site release criteria for final status surveys as specified in PG&E’s Characterization Survey Planning Worksheet. In addition, the confirmatory results indicated that the ORISE FOTA survey unit Cs-137 mean concentrations results compared favorably with the PG&E FOTA Cs-137 mean concentration results, as determined by ORISE from the PG&E characterization data. The interlaboratory comparison analyses of the three soil samples analyzed by PG&E’s onsite laboratory and the ORISE laboratory indicated good agreement for the sample results and provided confidence in the PG&E analytical procedures and final status survey soil sample data reporting.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Measurements of alpha and beta radiation from uncontaminated surfaces of common building materials using the RadEye SX with Ludlum 43-93 Probe

Federal regulation requires the measurement of radioactivity located in or on potentially-contaminated items or materials prior to public release. Surface radioactivity must be at or below radioactivity limits that are protective of the public. These limits are low enough that contributions to radioactive emissions from naturally occurring radioactive materials (NORM) in the building materials must be considered. In uncontaminated materials, measurements commonly reflect NORM content inside construction materials in addition to radon decay products that have collected on surfaces. Therefore, it is important to quantify typical background NORM count rates to accurately determine the fraction of radioactivity added to building materials by radiological operations.

36 MATERIALS SCIENCE↗

Measuring dark neutrinos and light using external and internal components of LArTPCs

The so-called MiniBooNE low-energy excess has been a long-standing questionfor beyond Standard Model (BSM) physics in the neutrino field. The ShortBaseline Neutrino (SBN) program was proposed to investigate and provide furtherinsights into this excess. The SBN program utilises Liquid Argon Time ProjectionChamber (LArTPC) technology, which allows for precise measurements of neutrinointeractions and holds great potential for addressing significant open questions inthe field. Within the SBN program, the Short Baseline Near Detector (SBND) plays acrucial role as one of the near detector, positioned just 110 meters from the neutrinosource. Being located on the surface, SBND is exposed to cosmic-ray background,and to mitigate this, the Cosmic Ray Tagger (CRT) system has been implemented toidentify and veto cosmic background events, thereby enhancing the purity of neutrinointeractions. Additionally, the CRT system can be used to search for BSM signatures,such as the dark neutrinos, which have been proposed to explain the MiniBooNElow-energy excess. This thesis presents a novel approach for searching for darkneutrinos using existing SBND CRT data, collected with a unique setup called theCRT Beam Telescope. An extended model-independent search based on the darkneutrino analysis is also presented. The sensitivity plot for the CRT Beam Telescopeis compared with an estimated MiniBooNE exclusion limit. Furthermore, this thesiscovers the commissioning work conducted for the SBND CRT system, which is vitalfor ensuring optimal performance. The LArTPC technology also benefits from liquidargon’s excellent scintillation properties, producing abundant scintillation light. Thisthesis describes a method developed to understand the detector response to thescintillation light produced across the LArTPC, enhancing our understanding of thedetector’s performance and facilitating more accurate measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Simultaneous mapping of nanoscale dielectric, electrochemical, and ferroelectric surface properties of van der Waals layered ferroelectric via advanced SPM

Ferroelectric surfaces involve a complex interplay between polarization and dielectric properties, internal and external surface charge screening, and ionic and electrochemical effects. There is currently no good way to simultaneously capture all the required information at appropriate length scales. To this end, we present an advanced scanning probe microscopy approach for simultaneously mapping surface potential, dielectric, and piezoelectric properties on the nanoscale. For quantitatively mapping electromechancial properties, we utilize interferometric displacement sensing piezoresponse force microscopy, which measures the effective piezoelectric coefficient free of background artifacts such as the cantilever body electrostatics. The dielectric and surface electrochemical properties are captured during G-mode electrostatic force microscopy/Kelvin probe force microscopy operated in the lift mode. We show the capabilities of this approach on the chemically phase separated composite sample consisting of a van der Waals layered ferroelectric CuInP 2 S 6 phase and a non-polar In 4/3 P 2 S 6 phase. Finally, we demonstrate domain structure evolution during thermally stimulated phase transition.

36 MATERIALS SCIENCE↗

Surface complexation modeling of U(VI) adsorption by aquifer sediments from a former mill tailings site at Rifle, Colorado

U(VI) adsorption by two aquifer sediment samples was studied under oxic conditions as a function of pH, U(VI), Ca, and dissolved carbonate concentration. Background-A (BKG-A) sediment was collected upstream of a former uranium mill-tailings site at Rifle, Colorado, and Little Rusty Composite (LRC) was collected on site but with low U contamination. Batch adsorption experiments were performed using artificial groundwater solutions prepared to simulate the field groundwater composition in equilibrium with specific partial pressures of carbon dioxide. To encompass the geochemical conditions of the alluvial aquifer at the site, the experimental conditions ranged from 6.8×10-8 to 10-5 M in [U(VI)]tot, 7.2 to 8.0 in pH, 3.0×10-3 to 6.0×10-3 M in [Ca2+], and 0.05 to 2.6% in partial pressure of carbon dioxide. The sediment was extracted with a dilute bicarbonate/carbonate solution to determine the background labile U(VI) already present in the sediment. A semi-empirical surface complexation model was developed to describe U(VI) adsorption using FITEQL4. The non-electrostatic, generalized composite surface complexation model successfully simulated U(VI) adsorption over the range of groundwater conditions at the Old Rifle site, using a two-site, two-reaction fitting scheme. The sensitivity of model parameters to background U(VI) concentration on the two samples was evaluated. U(VI) adsorption experiments were also performed using a sand fraction of BKG-A separated through repeated sonication and wet-sieving. Surface area normalized Kd for the bulk and sand fraction indicated similar reactivity for both. The surface complexation model developed in this work is expected to contribute to the prediction of fate and transport of U(VI) in the alluvial aquifer at the Old Rifle site, and to assist in the simulation of biostimulation field experiments performed at the site.

54 ENVIRONMENTAL SCIENCES↗

Enhancement of the contrast ratio associated with surface waves in a metal pillar-slit structure

A simple optical structure, termed a pillar-slit structure, is proposed to enhance the contrast ratio of the weak optical signal. The structure consists of a metal slit surrounded by two metal pillars and can be directly incorporated onto optical sensors. The waves excited on the incident surface are modulated by the pillars and then scattered by the slit entrance so as to generate the in-slit surface plasmon polaritons passing through the slit. The transmission power is modified by the surface wave intensity. This structure is capable of suppressing background and enhancing signal light simultaneously. A calculated illustration by the numerical simulation method shows that an increase of the contrast ratio can be exceeded 900 times.

36 MATERIALS SCIENCE↗

Analysis of dynamic radiation level changes using surface networks [Book Chapter]

The Fukushima nuclear accident reminds us of severe risk of radioactive substances. Citizen scientists voluntarily collect and share radiation data using geo-tagged sensors for radiation preparedness. However, radiation levels are affected by a number of factors including for example weather conditions, naturally occurring radioactive materials (NORM), and large marble structures. It is therefore difficult to determine whether a higher radiation level comes from a normal variation in background or not. This research analyzes the radiation changes using surface networks that can be used to characterize complex surfaces. A new algorithm has been developed to identify salient peaks and their hills by merging insignificant peaks recur-sively. Salient peaks and their hills are converted into graphs. The structural similarities of graphs were compared over time. The radiation measurements in the city of Koriyama, Japan were analyzed as a case study. The results demonstrated that structural analysis of dynamic radiation levels revealed stable changes, while numeric analysis of radiation levels presented statistically significant differences. This method is able to detect radiation level changes irrespective of background variations.

97 MATHEMATICS AND COMPUTING↗