Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

The influence of size, shape, and surface coating on the stability of aqueous nanoparticle suspensions

In response to the rapid development and emerging commercialization of nanoparticles, fundamental studies concerning the fate of nanoparticles in the environment are needed. Precise control over the nanoparticle size, shape, and surface coating of cadmium selenide particles modified with thiolate ligands has been used to analyze the effects of nanoparticle design on their stability in aqueous environments. Nanoparticle stability was quantified using the concept of critical coagulation concentration (CCC) in solutions of sodium chloride. These investigations characterized the instability of the ligand coatings, which varied directly with chain length of the capping ligands. The stability of the ligand coatings were characterized as a function of time, pH, and ionic strength. Ligand dissociation has been shown to be a primary mechanism for nanoparticle aggregation when short-chain (C2-C6) ligands are used in the ligand shell. Stable nanoparticle suspensions prepared with long chain ligands (C11) were used to characterize nanoparticle stability as a function of size and shape. A linear relationship between particle surface area and the CCC was discovered and was found to be independent of nanoparticle shape. Quantitative analysis of nanoparticle size, shape, and surface coating demonstrated the importance of ligand stability and particle surface area for the prediction of nanoparticle stability.

54 ENVIRONMENTAL SCIENCES↗

Computational Investigation of FeS 2 Surfaces and Prediction of Effects of Sulfur Environment on Stabilities

Density functional theory calculations were employed to investigate the (001), (210), (111), and (110) surfaces of FeS 2 . The surface free energies were calculated in equilibrium with a sulfur environment using firstprinciples based thermodynamics approach. Surfaces that feature metal atoms in their outermost layer are predicted to be higher in energy. Within the studied subset of (1 x 1) terminations, the stoichiometric (001) surface terminated by a layer of sulfur atoms is the most stable for sulfur-lean condition. For increasingly sulfur-rich environment, two structures were found to have notably lower surface energies compared to others. They have (210) and (111) orientation, both terminated by layers of sulfur. Interestingly, these surfaces are nonstoichiometric exhibiting an excess of sulfur atoms.

54 ENVIRONMENTAL SCIENCES↗

Theory of multiple quantum dot formation in strained-layer heteroepitaxy

We develop a theory for the experimentally observed formation of multiple quantum dots (QDs) in strained-layer heteroepitaxy based on surface morphological stability analysis of a coherently strained epitaxial thin film on a crystalline substrate. Using a fully nonlinear model of surface morphological evolution that accounts for a wetting potential contribution to the epitaxial film's free energy as well as surface diffusional anisotropy, we demonstrate the formation of multiple QD patterns in self-consistent dynamical simulations of the evolution of the epitaxial film surface perturbed from its planar state. The simulation predictions are supported by weakly nonlinear analysis of the epitaxial film surface morphological stability. We find that, in addition to the Stranski-Krastanow instability, long-wavelength perturbations from the planar film surface morphology can trigger a nonlinear instability, resulting in the splitting of a single QD into multiple QDs of smaller sizes, and predict the critical wavelength of the film surface perturbation for the onset of the nonlinear tip-splitting instability. The theory provides a fundamental interpretation for the observations of “QD pairs” or “double QDs” and other multiple QDs reported in experimental studies of epitaxial growth of semiconductor strained layers and sets the stage for precise engineering of tunable-size nanoscale surface features in strained-layer heteroepitaxy by exploiting film surface nonlinear, pattern forming phenomena.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of thickness and surface composition on the stability of polarization in ferroelectric Hf x Zr 1 - x O 2 thin films

Using density functional theory, we find that tailoring the surface composition provides a route to stabilize the polar phases of the promising ferroelectric material, Hf x Zr 1-x O 2 . First, we show that for pure Hf O 2 , controlling the positively polarized surface to be relatively oxygen rich adequately screens the ferroelectric surface charges and stabilizes the polar orthorhombic phase. We then demonstrate that the ferroelectric polarization, as measured by the structural polar displacements, increases with decreasing thickness, leading to the emergence of a polar rhombohedral-like phase at the ultrathin limit (1.5 unit cells). Our findings extend to the cases of Hf 0.5 Zr 0.5 O 2 and Zr O 2 , both of which have surface energy landscapes similar to that of Hf O 2 . In conclusion, these findings are consistent with and offer insights into the observed absence of a ferroelectric thickness limit in Hf x Zr 1-x O 2 -based thin films.

36 MATERIALS SCIENCE↗

Spatial Arrangment of Organic Compounds on a Model Mineral Surface: Implications for Soil Organic Matter Stabilization

The complexity of the mineral organic carbon interface may influence the extent of stabilization of organic carbon compounds in soils, which is important for global climate futures. The nanoscale structure of a model interface was examined here by depositing films of organic carbon compounds of contrasting chemical character, hydrophilic glucose and amphiphilic stearic acid, onto a soil mineral analogue (Al2O3). Neutron reflectometry, a technique which provides depth-sensitive insight into the organization of the thin films, indicates that glucose molecules reside in a layer between Al2O3 and stearic acid, a result that was verified by water contact angle measurements. Molecular dynamics simulations reveal the thermodynamic driving force behind glucose partitioning on the mineral interface: The entropic penalty of confining the less mobile glucose on the mineral surface is lower than for stearic acid. The fundamental information obtained here helps rationalize how complex arrangements of organic carbon on soil mineral surfaces may arise

Petridis, Loukas↗

Controlled one-step synthesis of hierarchically structured macroscopic silica spheres

Novel hierarchically structured macroscopic silica spheres have been synthesized using a biphasic oil-in-water system. The spheres are prepared in a one-step process by injection of the precursor solution into water. This leads to controlled hydrolysis and condensation of the silanes. The precursor solution contained three different silanes, a block copolymer acting as surfactant and a solvent. The spheres have a hierarchically layered morphology, high mechanical stability, specific surface areas up to 700 m{sup 2}/g with mesopores in the range of 9-27 nm. The synthesis of such materials with a simultaneous control of the macroscopic and microscopic structure allows facile implementation in separation and catalysis.

36 MATERIALS SCIENCE↗

Synthesis, Structure, and Metalation of Two New Highly Porous Zirconium Metal-Organic Frameworks

Three new metal-organic frameworks [MOF-525, Zr 6 O 4 (OH) 4 (TCPP-H 2 ) 3 ; MOF-535, Zr 6 O 4 (OH) 4 (XF) 3 ; MOF-545, Zr 6 O 8 (H 2 O) 8 (TCPP-H 2 ) 2 , where porphyrin H 4 -TCPP-H 2 = (C 48 H 24 O 8 N 4 ) and cruciform H 4 -XF = (C 42 O 8 H 22 )] based on two new topologies, ftw and csq, have been synthesized and structurally characterized. MOF-525 and -535 are composed of Zr 6 O 4 (OH) 4 cuboctahedral units linked by either porphyrin (MOF-525) or cruciform (MOF-535). Another zirconium-containing unit, Zr 6 O 8 (H 2 O) 8 , is linked by porphyrin to give the MOF-545 structure. The structure of MOF-525 was obtained by analysis of powder X-ray diffraction data. The structures of MOF-535 and -545 were resolved from synchrotron single-crystal data. MOF-525, -535, and -545 have Brunauer-Emmett-Teller surface areas of 2620, 1120, and 2260 m 2 /g, respectively. In addition to their large surface areas, both porphyrin-containing MOFs are exceptionally chemically stable, maintaining their structures under aqueous and organic conditions. MOF-525 and -545 were metalated with iron(III) and copper(II) to yield the metalated analogues without losing their high surface area and chemical stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesoporous silica nanoparticles for biomedical and catalytical applications

Mesoporous silica materials, discovered in 1992 by the Mobile Oil Corporation, have received considerable attention in the chemical industry due to their superior textual properties such as high surface area, large pore volume, tunable pore diameter, and narrow pore size distribution. Among those materials, MCM-41, referred to Mobile Composition of Matter NO. 41, contains honeycomb liked porous structure that is the most common mesoporous molecular sieve studied. Applications of MCM-41 type mesoporous silica material in biomedical field as well as catalytical field have been developed and discussed in this thesis. The unique features of mesoporous silica nanoparticles were utilized for the design of delivery system for multiple biomolecules as described in chapter 2. We loaded luciferin into the hexagonal channels of MSN and capped the pore ends with gold nanoparticles to prevent premature release. Luciferase was adsorbed onto the outer surface of the MSN. Both the MSN and the gold nanoparticles were protected by poly-ethylene glycol to minimize nonspecific interaction of luciferase and keep it from denaturating. Controlled release of luciferin was triggered within the cells and the enzymatic reaction was detected by a luminometer. Further developments by varying enzyme/substrate pairs may provide opportunities to control cell behavior and manipulate intracellular reactions. MSN was also served as a noble metal catalyst support due to its large surface area and its stability with active metals. We prepared MSN with pore diameter of 10 nm (LP10-MSN) which can facilitate mass transfer. And we successfully synthesized an organo silane, 2,2'-Bipyridine-amide-triethoxylsilane (Bpy-amide-TES). Then we were able to functionalize LP10-MSN with bipyridinyl group by both post-grafting method and co-condensation method. Future research of this material would be platinum complexation. This Pt (II) complex catalyst has been reported for a C-H bond activation reaction as an alternative of the traditional Friedel-Crafts reaction. And we will compare the turnover numbers of MSN supported material with homogenous catalyst to evaluate the catalytical efficiency of our material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mitigation of rapid capacity decay in silicon-LiNi 0.6 Mn 0.2 Co 0.2 O 2 full batteries

Silicon (Si)-based materials have been considered as the most promising anode materials for high-energy-density lithium-ion batteries because of their higher storage capacity and similar operating voltage, as compared to the commercial graphite (Gr) anode. But the use of Si anodes including silicon-graphite (Si-Gr) blended anodes often leads to rapid capacity decay in Si-Gr/LiNixMnyCo z O 2 (x+y+z=1) full cells, which has been attributed to surface instability of the Si component. In addition to stabilizing the surface, this work investigates the potential of the Si-Gr blended anodes in a full-cell configuration and its impact on the capacity contribution from active components. Using dQ/dV plots of the full cells, a powerful but simple-to-implement differential potential approach is developed to decouple the capacity contribution and degradation from the graphite and silicon components. Data collected from three-electrode cells confirm the results from the differential potential approach, which suggests a voltage slippage to a higher voltage at the blended anode side. Additionally, the voltage slippage causes a reduced utilization of the Gr component and exacerbates side reactions between the Si-Gr anode and carbonate electrolytes. Furthermore, based on these failure mechanisms, we adopted a mitigation strategy to tune the open circuit voltage of the prelithiated anode while stabilizing the surface. As a result, the full cells with the modified Si-Gr anodes (mass loading, 2.5 mAh/cm 2 ) offer a highly reversible full-cell energy density of 390 Wh/kg (based on the mass of both anode and cathode materials in a full cell) with a cycling CE of 99.9% over 200 cycles.

25 ENERGY STORAGE↗

Catalytic Activity and Water Stability of the MgO(111) Surface for 2-Pentanone Condensation

Nanomaterials derived from earth-abundant metal oxides have gained tremendous interest as catalysts; although, water stability remains a challenge. This study examines MgO(111) surfaces for 2-pentanone condensation and their evolution during D2O hydration. Catalyst screening confirmed the high activity of fresh MgO(111) for 2-pentanone condensation relative to conventionally prepared MgO(100). Computational modeling suggests that the (111) surface is readily hydroxylated, and that surface hydroxyls help stabilize the surface and reduce the barrier for 2-pentanone condensation. Vapor-phase D2O hydration after 3 min increased MgO(111) hydroxyls and retained surface area and activity; however, after 1 h, deuteroxide formation reduced the surface area and activity by >30 %. After 24 h, deuteroxide growth slowed down, and surface area and activity remained stable. This suggests MgO(111)-derived hydroxide may be the dominant surface responsible for 2-pentanone condensation following water exposure. Thermal regeneration of the 24-h sample restored 86 % of the surface area and 94 % of the activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical Study of the Effects of Atmospheric and Wake Turbulence on Wind Turbine Dynamics

Although the atmospheric sciences community has been studying the effects of atmospheric stability and surface roughness on the planetary boundary layer for some time, their effects on wind turbine dynamics have not been well studied. In this study, we performed numerical experiments to explore some of the effects of atmospheric stability and surface roughness on wind turbine dynamics. We used large-eddy simulation to create atmospheric winds and compute the wind turbine flows, and we modeled the wind turbines as revolving and flexible actuator lines coupled to a wind turbine structural and system dynamic model. We examined the structural moments about the wind turbine blade, low-speed shaft, and nacelle; power production; and wake evolution when large 5-MW turbines are subjected to winds generated from low- and high-surface roughness levels representative of offshore and onshore conditions, respectively, and also neutral and unstable atmospheric conditions. In addition, we placed a second turbine 7 rotor diameters downwind of the first one so that we could explore wake effects under these different conditions. The results show that the turbulent structures generated within the atmospheric boundary layer wind simulations cause isolated loading events at least as significant as when a turbine is waked by an upwind turbine. The root-mean-square (RMS) turbine loads are consistently larger when the surface roughness is higher. The RMS blade-root out-of-plane bending moment and low-speed shaft torque are higher when the atmospheric boundary layer is unstable as compared with when it is neutral. However, the RMS yaw moments are either equal or reduced in the unstable case as compared with the neutral case. For a given surface roughness, the ratio of power produced by the downwind turbine relative to that of the upwind turbine is 15-20% higher when the conditions are unstable as compared with neutral. For a given atmospheric stability, this power ratio is 10% higher with the onshore roughness value versus the offshore one. The main conclusion is that various coherent turbulent structures that form under different levels of atmospheric stability and surface roughness have important effects on wind turbine structural response, power production, and wake evolution.

17 WIND ENERGY↗

Coinage Metal–Sulfur Complexes: Stability on Metal(111) Surfaces and in the Gas Phase

We introduce a comprehensive theoretical assessment at the level of density functional theory (DFT) of the stability of various coinage metal–sulfur complexes, both in the gas phase and also for the complexes adsorbed on the (111) surface of the same coinage metal. Our primary interest lies in the latter where earlier scanning tunneling microscopy (STM) experiments were interpreted to imply the existence of adsorbed S-decorated metal trimers, sometimes as a component of more complex adlayer structures. Recent STM studies at 5 K directly observed other isolated adsorbed metal–sulfur complexes. For these adsorbed species, we measure various aspects of their energetics including a natural measure of stability corresponding to their formation energy from sulfur adsorbed on terraces and from metal atoms that are in thermal equilibrium with the substrate. From this perspective, our DFT analysis shows that all of Ag 2 S 3 , Ag 3 S 3 , and many larger complexes on Ag(111) are strongly stable, Cu 2 S 3 is stable, and some larger complexes are marginally stable on Cu(111), but only Au 4 S 4 on Au(111) is stable. Results are consistent with STM observations for Cu(111) and Ag(111) surfaces but appear to deviate slightly for Au(111). A systematic analysis relating stability in the gas phase with that of adsorbed species is achieved within the framework of Hess’s law. This analysis also unambiguously elucidates various energetic contributions to stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Nanocrystalline SnO 2 –TiO 2 System‒Part II: Surface Energies and Thermodynamic Stability

The thermodynamic stability of nanocrystalline SnO 2 –TiO 2 solid solutions was studied experimentally. Microcalorimetry of water adsorption revealed a systematic decrease in the surface energy with increasing Ti 4+ content in the SnO 2 ‐rich compositions, consistent with previous reports of Ti 4+ segregation on the surface. The surface energy change was accompanied by an increase in the magnitude of the heat of water adsorption, also indicating a modification of the SnO 2 surface by Ti 4+ . Supporting the water adsorption data, calculations using high‐temperature oxide melt solution calorimetry data also suggest a decrease in the interface energies. A thermodynamic analysis showed that the observed surface energy decrease is responsible for an increase in the stability of solid solutions in the nanophase regime. Although a miscibility gap is expected in this system from bulk phase diagrams, the surface energy contribution modifies the bulk trend and promotes extensive solid solutions when the surface area is above a critical value dependent on the surface energy and the bulk enthalpy of mixing.

Miagava, Joice↗

Surface effects and phase stability in metal oxides nanoparticles under visible irradiation

The light induced phase transformation between stable phases of metal oxides nanoparticles is analyzed. The surrounding atmosphere as well as the defect density at the surface play a fundamental role. It has been found that in oxygen poor chamber atmosphere the phase transformation is favored, while the phase transition cannot be achieved if the defects at the surface are properly passivated. The phase transition is activated by intragap irradiation, able to activate the F- center at the surface connected to oxygen vacancies, and promoting the activation of the surface and the nucleation of neighboring crystallites. The phase transition was studied in Titanium oxide (TiO{sub 2}) and in Iron oxide (Fe{sub 2}O{sub 3}): Maghemite is subjected to a phase transformation to α−Fe{sub 2}O{sub 3} (hematite), Anatase nanoparticles converts to Rutile. The general mechanism of the phase transition and, more in general, the possibility to optically control the surface activity of metal oxides is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tailoring the Surface of Silicon Nanoparticles for Enhanced Chemical and Electrochemical Stability for Li-Ion Batteries

Organic monolayers of epoxy-containing oligo(ethylene oxide)s were grafted to the surface of silicon nanoparticles via a hydrosilylation reaction. The surface functional groups suppressed the chemical and electrochemical reactivity of the as-grown and lithiated silicon nanoparticles with high material utilization. A robust Si/electrolyte interphase was formed with the participation of the grafted organic groups with facilitated Li+ transfer and was further enforced by electrode integrity via the epoxy/poly(acrylic acid) (PAA) binder reaction. The improved cycling stability and post-test analysis indicate that surface functionalization on the Si particle level is a feasible approach to enabling a Si anode in high-energy-density lithium-ion batteries.

36 MATERIALS SCIENCE↗

Fermi Surface Structure and Isotropic Stability of Fulde-Ferrell-Larkin-Ovchinnikov Phase in Layered Organic Superconductor β''-(BEDT-TTF) 2 SF 5 CH 2 CF 2 SO 3

The Fermi surface structure of a layered organic superconductor β''-(BEDT-TTF) 2 SF 5 CH 2 CF 2 SO 3 was determined by angular-dependent magnetoresistance oscillations measurements and band-structure calculations. This salt was found to have two small pockets with the same area: a deformed square hole pocket and an elliptic electron pocket. Characteristic corrugations in the field dependence of the interlayer resistance in the superconducting phase were observed at any in-plane field directions. The features were ascribed to the commensurability (CM) effect between the Josephson vortex lattice and the periodic nodal structure of the superconducting gap in the Fulde–Ferrell–Larkin–Ovchinnikov (FFLO) phase. The CM effect was observed in a similar field region for various in-plane field directions, in spite of the anisotropic nature of the Fermi surface. The results clearly showed that the FFLO phase stability is insensitive to the in-plane field directions.

36 MATERIALS SCIENCE↗