Search NASA⌕ Search

SEARCH · Search NASA

Results for “technical potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Front-of-Meter Model Results

These files contains aggregations of key variables from the NREL Distributed Wind Futures Study using full parcel level data. These variables describe total technical and economic potential for distributed wind turbine deployment. Aggregations are available at the (1) county, (2) zipcode (zip code tabulation area or zcta), and (3) US Census block group level. Each scenario is coded with the scenario name (e.g., baseline) and year (e.g., 2022). Those files postfixed with 'econpot' contain results for only those parcels that are economically viable while the files postfixed with 'techpot' include results for all parcels that are technically feasible. Hence these correspond to technoeconomic and technical potential respectively. The data are available as CSV or Geopackage. Columns in the files are as follows: * geoid: geographic identifier (FIPS code or similar) * min_techpot_sum_kw: technical potential for all parcels in kW using turbines downsized to demand when appropriate * max_techpot_sum_kw: technical potential for all parcels in kW without downsizing turbines * aep_sum_kwh: annual energy production estimate in kWh * cf_mean_ratio: mean capacity factor * lcoe_mean_cents_per_kwh: mean levelized cost of energy for parcels in geography in cents per kWh * lcoe_std_cents_per_kwh: standard deviation of the above * parcel_area_sum_acres: total area of viable parcels in acres * n_turbines: number of cited turbines (one per viable parcel currently) Note: These are preliminary results from the full-parcel 2024 update of the Distributed Wind Energy Futures study. Please take care when making use of the data, and feel free to contact the team with any questions. Full documentation in support of these data is in progress and will follow.

17 WIND ENERGY↗

Behind-the-Meter Model Results

These files contains aggregations of key variables from the NREL Distributed Wind Futures Study using full parcel level data. These variables describe total technical and economic potential for distributed wind turbine deployment. Aggregations are available at the (1) county, (2) zipcode (zip code tabulation area or zcta), and (3) US Census block group level. Each scenario is coded with the scenario name (e.g., baseline) and year (e.g., 2022). Those files postfixed with 'econpot' contain results for only those parcels that are economically viable while the files postfixed with 'techpot' include results for all parcels that are technically feasible. Hence these correspond to technoeconomic and technical potential respectively. The data are available as CSV or Geopackage. Columns in the files are as follows: * geoid: geographic identifier (FIPS code or similar) * min_techpot_sum_kw: technical potential for all parcels in kW using turbines downsized to demand when appropriate * max_techpot_sum_kw: technical potential for all parcels in kW without downsizing turbines * aep_sum_kwh: annual energy production estimate in kWh * cf_mean_ratio: mean capacity factor * lcoe_mean_cents_per_kwh: mean levelized cost of energy for parcels in geography in cents per kWh * lcoe_std_cents_per_kwh: standard deviation of the above * parcel_area_sum_acres: total area of viable parcels in acres * n_turbines: number of cited turbines (one per viable parcel currently)

17 WIND ENERGY↗

Technical and Economic Screening for Potential of Distributed Energy Resource Integration at Chervonohrad Water Utility in Ukraine

In this report, the authors present a preliminary techno-economic screening for distributed renewable energy for Chervonohrad Vodokanal, the water utility in Chervonohrad, Ukraine. The screening estimates the technical potential and economics of integrating solar photovoltaics (PV) and battery energy storage systems (BESS) at Chervonohrad Vodokanal water pumping stations, Pravda, Bendiuha, and Mezhyrichchya. For the Ukrainian version of this report, see NREL/TP-7A40-90360 (https://www.nrel.gov/docs/fy24osti/90360.pdf).

14 SOLAR ENERGY↗

ТЕХНІКО-ЕКОНОМІЧНИЙ АНАЛІЗ ПОТЕНЦІАЛУ ІНТЕГРАЦІЇ РОЗПОДІЛЕНИХ ЕНЕРГЕТИЧНИХ РЕСУРСІВ ДЛЯ ВОДОКАНАЛУ М.ЧЕРВОНОГРАД В УКРАЇНІ [Technical and Economic Screening for Potential of Distributed Energy Resource Integration at Chervonohrad Water Utility in Ukraine] (Ukrainian Translation)

In this report, the authors present a preliminary techno-economic screening for distributed renewable energy for Chervonohrad Vodokanal, the water utility in Chervonohrad, Ukraine. The screening estimates the technical potential and economics of integrating solar photovoltaics (PV) and battery energy storage systems (BESS) at Chervonohrad Vodokanal water pumping stations, Pravda, Bendiuha, and Mezhyrichchya. For the English version of this report, see NREL/TP-7A40-89599 (https://www.nrel.gov/docs/fy24osti/89599.pdf).

14 SOLAR ENERGY↗

Vision of 3D printing with concrete ÔÇö Technical, economic and environmental potentials

A vision is presented on 3D printing with concrete, considering technical, economic and environmental aspects. Although several showcases of 3D printed concrete structures are available worldwide, many challenges remain at the technical and processing level. Currently available high-performance cement-based materials cannot be directly 3D printed, because of inadequate rheological and stiffening properties. Active rheology control (ARC) and active stiffening control (ASC) will provide new ways of extending the material palette for 3D printing applications. From an economic point of view, digitally manufactured concrete (DFC) will induce changes in the stakeholders as well as in the cost structure. Although it is currently too ambitious to quantitatively present the cost structure, DFC presents many potential opportunities to increase cost-effectiveness of construction processes. The environmental impact of 3D printing with concrete has to be seen in relation to the shape complexity of the structure. Implementing structural optimization as well as functional hybridization as design strategies allows the use of material only where is structurally or functionally needed. This design optimization increases shape complexity, but also reduces material use in DFC. As a result, it is expected that for structures with the same functionality, DFC will environmentally perform better over the entire service life in comparison with conventionally produced concrete structures.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Satellite provided customer premise services: A forecast of potential domestic demand through the year 2000. Volume 2: Technical report

The potential United States domestic telecommunications demand for satellite provided customer premises voice, data and video services through the year 2000 were forecast, so that this information on service demand would be available to aid in NASA program planning. To accomplish this overall purpose the following objectives were achieved: development of a forecast of the total domestic telecommunications demand, identification of that portion of the telecommunications demand suitable for transmission by satellite systems, identification of that portion of the satellite market addressable by Computer premises services systems, identification of that portion of the satellite market addressabble by Ka-band CPS system, and postulation of a Ka-band CPS network on a nationwide and local level. The approach employed included the use of a variety of forecasting models, a market distribution model and a network optimization model. Forecasts were developed for; 1980, 1990, and 2000; voice, data and video services; terrestrial and satellite delivery modes; and C, Ku and Ka-bands.

Kratochvil, D.↗

Techno-Economic Renewable Energy Potential on Tribal Lands

Renewable energy technologies provide opportunities for diversification, energy independence, environmental sustainability, and new revenue streams for Native American Indian tribes and Alaska Native villages. Many of these lands are in areas with that have abundant renewable energy, such as wind, solar, and biomass. This study estimates the technical and economic potential for renewable energy development on tribal lands. It aims to support tribes in decision-making as they evaluate technologies, potential scales of development, and economic viability. The resources analyzed here include wind, solar photovoltaics (PV) and concentrating solar power (CSP), woody biomass, biogas, geothermal, and hydropower. The study provides updated information to a previous renewable energy technical potential analysis on tribal lands, Geospatial Analysis of Renewable Energy Technical Potential on Tribal Lands (Doris et al. 2013). It includes current information, refined data, additional locations (in Alaska, for distributed generation only), and an expanded scope expansion that includes an economic evaluation of the renewable energy potential.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Proceedings of the 2021 Airborne Wind Energy Workshop

On March 2-3, 2021, the National Renewable Energy Laboratory (NREL) conducted a virtual workshop to evaluate the status, potential development, and technical viability of AWE systems as a source of energy in the United States. Stakeholder input provided at the workshop will contribute to the report to Congress. This report summarizes key workshop findings, current technology research and development activities in the United States, and opportunities and potential modes of collaboration and coordination for future technology research and development activities. The workshop focused on U.S. stakeholders in AWE, with approximately 100 experts and industry stakeholders from AWE technology developers, operators, engineering firms, consultants, government, national laboratories, and university researchers. The workshop began with an explanation from DOE's Wind Energy Technologies Office (WETO) Technology Manager, Ben Hallissy, of the context and purpose of the workshop, including a request from Congress that the U.S. Department of Energy (DOE) deliver a "report on the potential for, and technical viability of, airborne wind energy systems to provide a significant source of energy in the United States, including a summary of research, development, demonstration, and commercialization needs, including an estimate of Federal funding requirements, to further examine and validate the technical and economic viability of airborne wind energy concepts over the 10-year period." The workshop began with brief introductions from attendees who explained their interest in AWE. Nicolas El Hayek of Planair summarized the proceedings from the AWE workshop held in September 2020 by the International Energy Agency (IEA) Wind Task 11. This was followed by a presentation by Roland Schmehl of TU-Delft summarizing European AWE R&D efforts. Chris Vermillion of North Carolina State University and Jason Jonkman of NREL presented an overview of U.S. R&D efforts. Then five panelists discussed AWE markets, sizes of AWE systems, challenges, and opportunities. Panelists included: Cristina Archer, professor at the College of Earth, Ocean, and Environment and associate director at the Center for Research in Wind (CReW) at the University of Delaware; Stephan Brabeck, chief technology officer at SkySails; Thierry Delahave, innovation and technology development lead at Saipem; Rob Creighton, founder and chief executive officer at WindLift; and David Schaefer, founder and chief executive officer at eWind Solutions. The second day of the workshop began with a brief overview of five key topics that are crucial to enabling AWE in the United States. These topics range from estimates of the U.S. wind resource, technical generation potential, economic analysis, environmental challenges, status of current technology and R&D activities, and needed activities to enable commercialization of AWE. This set the stage for a robust discussion in breakout groups where individuals could offer their opinions on the potential opportunities for AWE in the United States. The following topics were discussed in the breakout groups: resource potential and energy output, technical potential, social and environmental impacts, and permitting, techno-economic analysis and markets, technology assessment and upscaling and demonstration and commercialization needs. The second day concluded with reports by the NREL research team, communicating the key themes and outcomes from each of the breakout group discussions.

17 WIND ENERGY↗

H2@Scale Analysis

The 'H2@Scale' concept focuses on the opportunity for hydrogen to be an energy intermediate like electricity that supports both production opportunities and demand applications. Hydrogen is complementary to electricity because of its inherent capability to be stored. It can also be produced easily from electricity and is fungible with a variety of applications. This presentation summarizes the H2@Scale analysis efforts performed during the latter half of 2017 and the first third of 2018. The analysis focused on the technical and economic potential for hydrogen and found that the technical potential is 87 million metric tons (MMT) annually. The analysis shows sufficient wind and solar resources to meet that demand. Four economic potential scenarios are also presented. Their market sizes, prices, sources, and applications are estimated through development of national supply and demand curves and using them to estimate market equilibria. The resulting market size ranges from 16 MMT/yr to 31 MMT/yr. Analysis is underway to identify the lowest-cost delivery and storage options for those four scenarios. Additional proposed work focuses on developing regional fidelity and understanding potential opportunities for a transition from today's hydrogen market to one with H2@Scale.

08 HYDROGEN↗

Energy efficiency, human behavior, and economic growth: Challenges to cutting energy demand to sustainable levels

Increasing energy efficiency in households, transportation, industries, and services is an important strategy to reduce energy service demand to levels that allow the steep reduction of greenhouse gases, and a full fledged switch of energy systems to a renewable basis. Yet, technological efficiency improvements may generate so-called rebound effects, which may ‘eat up’ parts of the technical savings potential. This article provides a comprehensive review of existing research on these effects, raises critiques, and points out open questions. It introduces micro-economic rebound effect and suggests extending consumer-side analysis to incorporate potential ‘psychological rebound effects.’ It then discusses meso-economic rebound effects, i.e. producer-side and market-level rebounds, which so far have achieved little attention in the literature. Finally, the article critically reviews evidence for macro-economic rebound effects as energy efficiency-induced economic growth impacts. For all three categories, the article summarizes assessments of their potential quantitative scope, while pointing out remaining methodological weaknesses and open questions. As a rough “rule of thumb”, in the long term and on gross average, only half the technical savings potential of across-the-board efficiency improvements may actually be achieved in the real world. Policies that aim at cutting energy service demand to sustainable levels are well advised to take due note of detrimental behavioral and economic growth impacts, and should foster policies and measures that can contain them.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Environmental and technical assessments of the potential utilization of sewage sludge ashes (SSAs) as secondary raw materials in construction

Highlights: ► We used sewage sludge ashes in ready-mix concrete recipe. ► SSAs were used as a substitution of cement. ► Compressive strength of ready-mix concrete incorporating SSAs were similar as blank one. ► Contaminants leaching from concrete monoliths were above threshold limits. - Abstract: Ashes produced by thermal treatments of sewage sludge exhibit common properties with cement. For example, major elements present in SSA are the same of major elements of cement. Hydraulic properties of SSA are quite the same of cement ones. They may therefore be used to substitute part of cement in concrete or other cementitious materials, provided that technical prescriptions are satisfied and that environmental risks are not significantly increased. The objective of the present study was to determine the appropriate substitution ratios to satisfy both technical and environmental criteria. In a first step, the elemental composition and particle size distribution of the ashes were measured. Then the ashes were used along with Portland cement and sand at different ratios of substitution to produce mortar and concrete which were cured for up to 90 days into parallelepipedic or cylindrical monoliths. The mechanical properties of the monoliths were measured using standard procedures for flexural and compressive strengths, and compared to blanks containing no ashes. The environmental criteria were assessed using leaching tests conducted according to standard protocols both on the ashes and the monoliths, and compared to the blanks. Results showed that the characteristics of the ashes ranged between those of cement and sand because of their larger particle size and higher content in SiO{sub 2} as compared to cement. The monoliths made with the highest substitution ratios exhibited a significant decrease in flexural and compressive strengths. However, when the ashes were used in partial substitution of cement at appropriate ratios, the concrete monoliths exhibited similar compressive strengths as the blank samples. The most appropriate ratios were found to be 10% substitution of cement and 2% substitution of sand. The leaching tests conducted on the ashes in their powdery form revealed that amongst the potential contaminants analyzed only Mo and Se were leached at concentrations above the threshold limits considered. The leaching tests conducted on concrete monoliths showed however that none of the contaminants monitored, including Mo and Se, were leached above the limits. In addition, whether concrete recipe incorporated ashes or not, similar concentrations were measured for each potential contaminant in the leachates. This result indicated that mixing ash with cement and sand to produce mortar or concrete induced a stabilization of Mo and Se and thereby constituted in itself a good treatment of the ashes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

H2@Scale: Opportunities for Hydrogen as an Energy Carrier

H2@Scale is a concept where hydrogen is an energy carrier that complements electricity and the natural gas system. This presentation summarizes the motivation for developing the H2@Scale concept and provides estimates of how large the hydrogen market could be.

08 HYDROGEN↗

China Energy and Emissions Paths to 2030

After over two decades of staggering economic growth and soaring energy demand, China has started taking serious actions to reduce its economic energy and carbon intensity by setting short and medium-term intensity reduction targets, renewable generation targets and various supporting policies and programs. In better understanding how further policies and actions can be taken to shape China's future energy and emissions trajectory, it is important to first identify where the largest opportunities for efficiency gains and emission reduction lie from sectoral and end-use perspectives. Besides contextualizing China's progress towards reaching the highest possible efficiency levels through the adoption of the most advanced technologies from a bottom-up perspective, the actual economic costs and benefits of adopting efficiency measures are also assessed in this study. This study presents two modeling methodologies that evaluate both the technical and economic potential of raising China's efficiency levels to the technical maximum across sectors and the subsequent carbon and energy emission implications through 2030. The technical savings potential by efficiency measure and remaining gap for improvements are identified by comparing a reference scenario in which China continues the current pace of with a Max Tech scenario in which the highest technically feasible efficiencies and advanced technologies are adopted irrespective of costs. In addition, from an economic perspective, a cost analysis of selected measures in the key industries of cement and iron and steel help quantify the actual costs and benefits of achieving the highest efficiency levels through the development of cost of conserved energy curves for the sectors. The results of this study show that total annual energy savings potential of over one billion tonne of coal equivalent exists beyond the expected reference pathway under Max Tech pathway in 2030. CO 2 emissions will also peak earlier under Max Tech, though the 2020s is a likely turning point for both emission trajectories. Both emission pathways must meet all announced and planned policies, targets and non-fossil generation targets, or an even wider efficiency gap will exist. The savings potential under Max Tech varies by sector, but the industrial sector appears to hold the largest energy savings and emission reduction potential. The primary source of savings is from electricity rather than fuel, and electricity savings are magnified by power sector decarbonization through increasing renewable generation and coal generation efficiency improvement. In order to achieve the maximum energy savings and emission reduction potential, efficiency improvements and technology switching must be undertaken across demand sectors as well as in the growing power sector. From an economic perspective, the cost of conserved energy analysis indicates that nearly all measures for the iron and steel and cement industry are cost-effective. All 23 efficiency measures analyzed for the cement industry are cost-effective, with combined CO 2 emission reduction potential of 448 Mt CO 2 . All of the electricity savings measures in the iron and steel industry are cost-effective, but the cost-effective savings potential for fuel savings measures is slightly lower than total technical savings potential. The total potential savings from these measures confirm the magnitude of savings in the scenario models, and illustrate the remaining efficiency gap in the cement and iron and steel industries.

01 COAL, LIGNITE, AND PEAT↗

Analysis of Energy-Efficiency Opportunities for the Pulp and Paper Industry in China

This study assesses the impact of 23 energy-efficiency measures that could be applied in China's pulp and paper industry. We analyze the fuel- and electricity-efficiency improvement potential of these technologies for the year 2010 using a bottom-up conservation supply curve (CSC) model. The fuel CSC model shows that the cost-effective fuel efficiency improvement potential for China's pulp and paper industry is 179.6 PJ, and the total technical fuel-savings potential is 254.3 PJ. These figures represent 26.8 percent and 38.0 percent, respectively, of total fuel used in China’s pulp and paper industry in 2010. The CO 2 emissions reduction potential associated with ii the cost-effective fuel savings is 16.9 Mt CO 2 , and the total technical potential for CO 2 emissions reduction is 24.2 Mt CO 2 . The electricity CSC model shows that the total technical electricity-efficiency potential to 2,316 gigawatt-hours (GWh) or 4.3 percent of total electricity use in the pulp and paper industry in 2010. All of the electricity-efficiency potential is cost effective. The CO 2 emissions reduction potential associated with the total electricity savings is 1.8 Mt CO 2 . Sensitivity analyses for adoption rate, discount rate, electricity and fuel prices, investment costs, and the energy savings from each measure show that these parameters have significant influence on the results. Therefore, the results presented in this report should be interpreted with caution.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Community-Scale Energy Efficiency Assessment for Zero Net Energy Using the URBANopt Simulation Platform: Preprint

This project explored an innovative modeling approach for assessing the energy efficiency potential of the existing low-income Oceano neighborhood, in unincorporated San Luis Obispo County, and its effects on renewable generation requirements for achieving zero net energy (ZNE). One particular challenge faced was ascertaining the technical energy savings potential across a large neighborhood in a timely manner. The project overcame this challenge through the use of the URBANopt simulation platform, developed at the National Renewable Energy Laboratory. URBANopt manages the automated model creation, simulation, and result aggregation for different design scenarios of existing or candidate buildings in a large neighborhood. Customized energy efficiency packages considered for the residential and commercial sector in the neighborhood included lighting, HVAC, plug load, water heating, envelope, and energy education measures. As a result of the analysis for the Oceano community, energy efficiency measures that are available through incentive programs may provide a 7.4% reduction in the required distributed energy resource (DER) size, corresponding to a 25,000 ft2 decrease in PV array area, to achieve ZNE. Through this work, a computational tool was developed and is being leveraged by the County of San Luis Obispo (CoSLO). The tool has enabled the CoSLO staff to perform similar analysis of the technical potential for energy efficiency, and an understanding of the DER asset requirements and potential savings in other communities within the county.

building energy modeling↗

Assessment of Energy Efficiency Improvement and CO 2 Emission Reduction Potentials in the Cement Industry in China

China’s annual cement production (i.e., 1,868 Mt) in 2010 accounted for nearly half of the world’s annual cement production in the same year. We identified and analyzed 23 energy efficiency technologies and measures applicable to the processes in the cement industry. The Conservation Supply Curve (CSC) used in this study is an analytical tool that captures both the engineering and the economic perspectives of energy conservation. Using a bottom-up electricity CSC model, the cumulative cost-effective electricity savings potential for the Chinese cement industry for 2010-2030 is estimated to be 251 TWh, and the total technical electricity saving potential is 279 TWh. The CO 2 emissions reduction associated with cost-effective electricity savings is 144 Mt CO 2 and the CO 2 emission reduction associated with technical electricity saving potential is 161 Mt CO 2 . The fuel CSC model for the cement industry suggests cumulative cost-effective fuel savings potential of 4,326 PJ which is equivalent to the total technical potential with associated CO 2 emission reductions of 406 Mt CO 2 . In addition, a sensitivity analysis with respect to the discount rate used is conducted to assess the effect of changes in this parameter on the results. We also developed a scenario in which instead of only implementing the international technologies in 2010-2030, we implement both international and Chinese domestic technologies during the analysis period and calculate the saving and cost of conserved energy accordingly. The result of this study gives a comprehensive and easy to understand perspective to the Chinese cement industry and policy makers about the energy efficiency potential and its associated cost.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗