Promises and potentialities of electric propulsion status of thrustor performance
Electric thrustor development reviewed with stress on lifetime, efficiency, and potential use in space program
THRUSTOR↗
SEARCH · Search NASA
Results for “thrust programming”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Monopropellant hydrazine resistojet: Flight application design
The design, development, and testing of an engineering model nominal 20-millipound thrust monopropellant hydrazine resistojet program is directed toward the advanced development of an electrothermal hydrazine thruster (EHT). The EHT decomposes hydrazine thermally and expands the decomposition products through a nozzle to provide the impulse necessary to fulfill spacecraft propulsive requirements. The thruster is capable of operation at pulse widths from 0.050 second to steady state and delivers specific impulse values up to about 230 seconds depending on the duty cycle. The program is comprised of six tasks including analyses, the generation of specifications and other documentation, design, fabrication and test, data correlation, and recommendations for the design of flight units.
Kurch, C. K.↗
Monopropellant hydrazine resistojet: Data correlation
The design, development, and testing of an engineering model nominal 20-millipound thrust monopropellant hydrazine resistojet program is divided into six basic tasks. Included in these tasks are analyses, design, test, and data correlation of the electrothermal hydrazine thruster (EHT). A brief summary is provided of the analyses conducted for the EHT and the design of the engineering model thruster. Some of the results of the engineering model tests are then compared with the analytical performance models generated early in the program.
Murch, C. K.↗
Multistage, multiband and sequential imagery to identify and quantify non-forest vegetation resources
Earth Resources photographs from Apollo 6, 7, and 9 and photographs taken during Gemini 4, were used in the research along with high altitude and conventional aerial photography. A unified land use and resource analysis system was devised and used to develop a mapping legend. The natural vegetation, land use, macrorelief, and landforms of northern Maricopa County, Arizona, were analyzed and inventoried. This inventory was interpreted in relation to the critical problem of urban expansion and agricultural production in the study area. The central thrust of the research program has been to develop methods for use of space and small-scale, high-altitude aerial photography to develop information for land use planning and resource allocation decisions.
Driscoll, R. S.↗
Advanced materials for space
The principal thrust of the LSST program is to develop the materials technology required for confident design of large space systems such as antennas and platforms. Areas of research in the FY-79 program include evaluation of polysulfones, measurement of the coefficient of thermal expansion of low expansion composite laminates, thermal cycling effects, and cable technology. The development of new long thermal control coatings and adhesives for use in space is discussed. The determination of radiation damage mechanisms of resin matrix composites and the formulation of new polymer matrices that are inherently more stable in the space environment are examined.
Tenney, D. R.↗
Crystal growth of device quality GaAs in space
The crystal growth, device processing and device related properties and phenomena of GaAs are investigated. Our GaAs research evolves about these key thrust areas. The overall program combines: (1) studies of crystal growth on novel approaches to engineering of semiconductor materials (i.e., GaAs and related compounds); (2) investigation and correlation of materials properties and electronic characteristics on a macro- and microscale; (3) investigation of electronic properties and phenomena controlling device applications and device performance. The ground based program is developed which would insure successful experimentation with and eventually processing of GaAs in a near zero gravity environment.
Gatos, H. C.↗
Crystal Growth of Device Quality Gaas in Space
The GaAs research evolves about these key thrust areas. The overall program combines: (1) studies of crystal growth on novel approaches to engineering of semiconductor material (i.e., GaAs and related compounds); (2) investigation and correlation of materials properties and electronic characteristics on a macro- and microscale; and (3) investigation of electronic properties and phenomena controlling device applications and device performance. This effort is aimed at the essential ground-based program which would insure successful experimentation with and eventually processing of GaAs in near zero gravity environment. It is believed that this program addresses in a unique way materials engineering aspects which bear directly on the future exploitation of the potential of GaAs and related materials in device and systems applications.
Gatos, H. C.↗
Overview of mechanics of materials branch activities in the computational structures area
Base programs and system programs are discussed. The base programs include fundamental research of composites and metals for airframes leading to characterization of advanced materials, models of behavior, and methods for predicting damage tolerance. Results from the base programs support the systems programs, which change as NASA's missions change. The National Aerospace Plane (NASP), Advanced Composites Technology (ACT), Airframe Structural Integrity Program (Aging Aircraft), and High Speed Research (HSR) programs are currently being supported. Airframe durability is one of the key issues in each of these system programs. The base program has four major thrusts, which will be reviewed subsequently. Additionally, several technical highlights will be reviewed for each thrust.
Poe, C. C., Jr.↗
SSTAC/ARTS Review of the Draft Integrated Technology Plan (ITP). Volume 2: Propulsion Systems
The topics addressed are: (1) space propulsion technology program overview; (2) space propulsion technology program fact sheet; (3) low thrust propulsion; (4) advanced propulsion concepts; (5) high-thrust chemical propulsion; (6) cryogenic fluid management; (7) NASA CSTI earth-to-orbit propulsion; (8) advanced main combustion chamber program; (9) earth-to-orbit propulsion turbomachinery; (10) transportation technology; (11) space chemical engines technology; (12) nuclear propulsion; (13) spacecraft on-board propulsion; and (14) low-cost commercial transport.
Source record↗
Low energy CMOS for space applications
The current focus of NASA's space flight programs reflects a new thrust towards smaller, less costly, and more frequent space missions, when compared to missions such as Galileo, Magellan, or Cassini. Recently, the concept of a microspacecraft was proposed. In this concept, a small, compact spacecraft that weighs tens of kilograms performs focused scientific objectives such as imaging. Similarly, a Mars Lander micro-rover project is under study that will allow miniature robots weighing less than seven kilograms to explore the Martian surface. To bring the microspacecraft and microrover ideas to fruition, one will have to leverage compact 3D multi-chip module-based multiprocessors (MCM) technologies. Low energy CMOS will become increasingly important because of the thermodynamic considerations in cooling compact 3D MCM implementations and also from considerations of the power budget for space applications. In this paper, we show how the operating voltage is related to the threshold voltage of the CMOS transistors for accomplishing a task in VLSI with minimal energy. We also derive expressions for the noise margins at the optimal operating point. We then look at a low voltage CMOS (LVCMOS) technology developed at Stanford University which improves the power consumption over conventional CMOS by a couple of orders of magnitude and consider the suitability of the technology for space applications by characterizing its SEU immunity.
Panwar, Ramesh↗
Microelectromechanical Systems
Micro-electromechanical systems (MEMS) is an enabling technology that merges computation and communication with sensing and actuation to change the way people and machines interact with the physical world. MEMS is a manufacturing technology that will impact widespread applications including: miniature inertial measurement measurement units for competent munitions and personal navigation; distributed unattended sensors; mass data storage devices; miniature analytical instruments; embedded pressure sensors; non-invasive biomedical sensors; fiber-optics components and networks; distributed aerodynamic control; and on-demand structural strength. The long term goal of ARPA's MEMS program is to merge information processing with sensing and actuation to realize new systems and strategies for both perceiving and controlling systems, processes, and the environment. The MEMS program has three major thrusts: advanced devices and processes, system design, and infrastructure.
Gabriel, Kaigham J.↗
LIDAR Remote Sensing Concepts
The primary goal of the NASA New Millennium Program (NMP) is to develop technology for use on future operational missions. The Program consists of two thrust areas, one oriented towards developing technologies for Deep Space Probes and one oriented towards developing technology for Earth Observing Probes. Each thrust area intends to fly several technology demonstrator spacecraft designated DS-X and EO-X respectively where X is the mission number. Each mission has an approximately $100 million cap on total mission cost. The EO-1 mission has been selected and is under development. The instrument discussed here was submitted by NASA MSFC as a potential candidate for the EO-2 or EO-3 missions due to launch in 2001 and late 2002 or early 2003 respectively. This report summarizes and follows the format of the material provided to NMP.
Spiers, Gary D.↗
LIDAR Remote Sensing Concepts
The primary goal of the NASA New Millennium Program (NMP) is to develop technology for use on future operational missions. The Program consists of two thrust areas, one oriented towards developing technologies for Deep Space Probes and one oriented towards developing technology for Earth Observing Probes. Each thrust area intends to fly several technology demonstrator space designated DS-X and EO-X respectively where X is the mission number. Each mission has an approximately $100 million cap on total mission cost. The EO-1 mission has been selected and is under development. The instrument discussed here was submitted by NASA MSFC as a potential candidate for the EO-2 or EO-3 missions due to launch in 2001 and late 2002 or early 2003 respectively. This report summarizes and follows the format of the material provided to NMP.
Spiers, Gary D.↗
Operational Issues in the Development of a Cost-Effective Reusable LOX/LH2 Engine
The NASA Space Launch Initiative (SLI) was initiated in early 2001 to conduct technology development and to reduce the business and technical risk associated with developing the next-generation reusable launch system. In the field of main propulsion, two LOXLH2 rocket engine systems, the Pratt & Whitney / Aerojet Joint Venture (JV) COBRA and the Rocketdyne RS-83, were funded to develop a safe, economical, and reusable propulsion system. Given that a large-thrust reusable rocket engine program had not been started in the U.S. since 1971, with the Space Shuttle Main Engine (SSME), this provided an opportunity to build on the experience developed on the SSME system, while exploiting advances in technology that had occurred in the intervening 30 years. One facet of engine development that was identified as being especially vital in order to produce an optimal system was in the areas of operability and maintainability. In order to achieve the high levels of performance required by the Space Shuttle, the SSME system is highly complex with very tight tolerances and detailed requirements. Over the lifetime of the SSME program, the engine has required a high level of manpower to support the performance of inspections, maintenance (scheduled and unscheduled) and operations (prelaunch and post-flight). As a consequence, the labor- intensive needs of the SSME provide a significant impact to the overall cost efficiency of the Space Transportation System (STS). One of the strategic goals of the SLI is to reduce cost by requiring the engine(s) to be easier (Le. less expensive) to operate and maintain. The most effective means of accomplishing this goal is to infuse the operability and maintainability features into the engine design from the start. This paper discusses some of the operational issues relevant to a reusable LOx/LH2 main engine, and the means by which their impact is mitigated in the design phase.
Ballard, Richard O.↗
Engine With Regression and Neural Network Approximators Designed
At the NASA Glenn Research Center, the NASA engine performance program (NEPP, ref. 1) and the design optimization testbed COMETBOARDS (ref. 2) with regression and neural network analysis-approximators have been coupled to obtain a preliminary engine design methodology. The solution to a high-bypass-ratio subsonic waverotor-topped turbofan engine, which is shown in the preceding figure, was obtained by the simulation depicted in the following figure. This engine is made of 16 components mounted on two shafts with 21 flow stations. The engine is designed for a flight envelope with 47 operating points. The design optimization utilized both neural network and regression approximations, along with the cascade strategy (ref. 3). The cascade used three algorithms in sequence: the method of feasible directions, the sequence of unconstrained minimizations technique, and sequential quadratic programming. The normalized optimum thrusts obtained by the three methods are shown in the following figure: the cascade algorithm with regression approximation is represented by a triangle, a circle is shown for the neural network solution, and a solid line indicates original NEPP results. The solutions obtained from both approximate methods lie within one standard deviation of the benchmark solution for each operating point. The simulation improved the maximum thrust by 5 percent. The performance of the linear regression and neural network methods as alternate engine analyzers was found to be satisfactory for the analysis and operation optimization of air-breathing propulsion engines (ref. 4).
Patnaik, Surya N.↗
Simulation of the Genesis of Hurricane Javier (2004) in the Eastern Pacific
NASA is preparing for the Tropical Cloud Systems and Processes (TCSP) field experiment in July 2005, a joint effort with NOAA to study tropical cloud systems and tropical cyclone genesis in the Eastern Pacific. A major thrust of the TCSP program is the improvement of the understanding and prediction of tropical cyclone genesis, intensity, motion, rainfall potential, and landfall impacts using remote sensing and in-situ data, as well as numerical modeling, particularly as they relate to the three phases of water. The Eastern Pacific has the highest frequency of genesis events per unit area of any region worldwide. African easterly waves, mesoscale convective systems (MCSs), and orographic effects are thought to play roles in the genesis of tropical cyclones there. The general consensus is that tropical depressions form in association with one or more mid-level, mesoscale cyclonic vortices that are generated within the stratiform region of the MCS precursors. To create the warm core tropical depression vortex, however, the midlevel cyclonic circulation must somehow extend down to the surface and the tangential winds must attain sufficient strength (-10 m s- ) to enable the wind-induced surface heat exchange to increase the potential energy of the boundary layer air.
Braun, Scott↗
Commercial Hypersonic Transportation Market Study
In support of NASA’s evaluation of its future research thrusts for its hypersonics program, NASA commissioned independent studies of the market for commercial hypersonic transportation. SAIC and BryceTech (formerly Bryce Space and Technology) were awarded one of these independent studies to assist NASA in better understanding: (1) the passenger demand for high-speed aviation travel; (2) the pressures on the business case for developing and operating a hypersonic aircraft for the commercial aviation market; and (3) the non-technical (i.e., societal) barriers and challenges, including the steps NASA and the Government could take to overcome those barriers and challenges. Our approach to addressing these three tasks for NASA included modeling future demand and future business operations, considering global air transportation at speeds of Mach 2 to Mach 7. The team forecast premium air travel demand through 2060 and assessed the willingness of passengers of different income and wealth levels to pay to save time on flights between 800 city pairs. With the total addressable market defined, we examined industry-level business case viability for several aircraft speed and range cases. Considering operating and manufacturing costs for routes that could be serviced profitably, as well as typical profitability targets for the aviation industry, we quantified the level of RDT&E funding available to support each business case.
hypersonic aircraft↗
Independent Market Study: Commercial Hypersonic Transportation
In support of NASA’s evaluation of its future research thrusts for its hypersonics program, NASA commissioned independent studies of the market for commercial hypersonic transportation. SAIC and BryceTech (formerly Bryce Space and Technology) were awarded one of these independent studies to assist NASA in better understanding: (1) the passenger demand for high-speed aviation travel; (2) the pressures on the business case for developing and operating a hypersonic aircraft for the commercial aviation market; and (3) the non-technical (i.e., societal) barriers and challenges, including the steps NASA and the Government could take to overcome those barriers and challenges. Our approach to addressing these three tasks for NASA included modeling future demand and future business operations, considering global air transportation at speeds of Mach 2 to Mach 7. The team forecast premium air travel demand through 2060 and assessed the willingness of passengers of different income and wealth levels to pay to save time on flights between 800 city pairs. With the total addressable market defined, we examined industry-level business case viability for several aircraft speed and range cases. Considering operating and manufacturing costs for routes that could be serviced profitably, as well as typical profitability targets for the aviation industry, we quantified the level of RDT&E funding available to support each business case.
hypersonic aircraft↗