Search NASA⌕ Search

SEARCH · Search NASA

Results for “transition state specificity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Magic Gap Ratio for Optimally Robust Fermionic Condensation and Its Implications for High- $T_c$ Superconductivity

Bardeen-Schrieffer-Cooper (BCS) and Bose-Einstein condensation (BEC) occur at opposite limits of a continuum of pairing interaction strength between fermions. A crossover between these limits is readily observed in a cold atomic Fermi gas. Whether it occurs in other systems such as the high temperature superconducting cuprates has remained an open question. We uncover here unambiguous evidence for a BCS-BEC crossover in the cuprates by identifying a universal magic gap ratio 2Δ/k B T c ≈ 6.5 (where Δ is the pairing gap and T c is the transition temperature) at which paired fermion condensates become optimally robust. At this gap ratio, corresponding to the unitary point in a cold atomic Fermi gas, the measured condensate fraction N0 and the height of the jump δγ(T c ) in the coefficient γ of the fermionic specific heat at T c are strongly peaked. In the cuprates, δγ(T c ) is peaked at this gap ratio when Δ corresponds to the antinodal spectroscopic gap, thus reinforcing its interpretation as the pairing gap. We find the peak in δγ(T c ) also to coincide with a normal state maximum in γ, which is indicative of a pairing fluctuation pseudogap above T c .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ferrimagnetic 120 ° magnetic structure in Cu 2 OSO 4

We report magnetic properties of a 3d 9 (Cu 2+ ) magnetic insulator Cu 2 OSO 4 measured on both powder and single crystal. The magnetic atoms of this compound form layers whose geometry can be described either as a system of chains coupled through dimers or as a kagome lattice where every third spin is replaced by a dimer. Specific heat and DC susceptibility show a magnetic transition at 20 K, which is also confirmed by neutron scattering. Magnetic entropy extracted from the specific heat data is consistent with an S=1/2 degree of freedom per Cu 2+ , and so is the effective moment extracted from DC susceptibility. The ground state has been identified by means of neutron diffraction on both powder and single crystal and corresponds to an ~120° spin structure in which ferromagnetic intradimer alignment results in a net ferrimagnetic moment. No evidence is found for a change in lattice symmetry down to 2 K. Finally, our results suggest that Cu 2 OSO 4 represents a type of model lattice with frustrated interactions where interplay between magnetic order, thermal and quantum fluctuations can be explored.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

HVAC System Performance for Energy Codes (Technical Brief)

The prescriptive path is likely the most widely used approach for commercial code compliance in the United States. Though easy to implement, the prescriptive approach does not discriminate between high-performing and poorly performing heating, ventilation, air conditioning (HVAC) system configurations that are both minimally compliant. To meet aggressive energy and carbon reduction goals, energy codes will need to transition from prescriptive to performance-based approaches, a transition that is riddled with several challenges. HVAC System Performance is a discipline performance path and provides a simpler solution to HVAC system evaluation compared to whole building performance, while keeping tradeoffs limited to specific building systems. The Total System Performance Ratio (TSPR) is a metric for evaluation of overall system efficiency instead of individual component efficiency, a solution that could also eventually facilitate the transition to a 100% performance-based code structure. TSPR is a ratio that compares the annual heating and cooling load of a building to the annual energy consumed by the building’s HVAC system. A web-based calculation tool has been developed for determining a building’s TSPR. Already incorporated into the 2018 Washington State Energy Code, this approach has also been evaluated by the ASHRAE Standard 90.1 Project Committee and has the potential to provide a comprehensive performance-based approach for HVAC system evaluation and analysis

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Total System Performance Ratio—A Systems Based Approach for Evaluating HVAC System Efficiency

The prescriptive path is the most widely used approach for commercial code compliance in the United States. Though easy to implement, prescriptive approaches do not typically discriminate between minimally compliant, high-performing and poorly performing HVAC system configurations. Hence, to meet aggressive energy and carbon reduction goals, it is clear that energy codes will need to transition from prescriptive to performance-based approaches, a transition that is riddled with several challenges. This paper discusses a new HVAC system-based performance approach (HVAC System Performance) which provides a simpler solution to HVAV system evaluation compared to whole building performance, while keeping tradeoffs limited to specific building systems. The Total System Performance Ratio (TSPR) is a metric for evaluation of overall system efficiency instead of individual component efficiency, a solution which could also eventually facilitate the transition to a 100% performance-based code structure. TSPR is a ratio that compares the annual heating and cooling load of a building to the annual energy consumed by the building’s HVAC system. A calculation software tool has been developed for determining a building’s TSPR. Already incorporated into the 2018 Washington State Energy Code, this approach is also being evaluated by ASHRAE Standard 90.l Project Committee and has the potential to provide a comprehensive performance-based approach for HVAC system evaluation and analysis.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Cloud‐Surface Coupling Alters the Morning Transition From Stable to Unstable Boundary Layer

Abstract Due to surface heating, the morning boundary layer transits from stable to neutral or convective conditions, exerting critical influences on low tropospheric thermodynamics. Low clouds closely interact with the boundary layer development, yet their interactions bear considerable uncertainties. Our study reveals that cloud‐surface coupling alters the morning transition from stable to unstable boundary layer and thus notably affects the diurnal variation of the boundary layer. Specifically, due to the reduction in surface fluxes, decoupled clouds can delay the process of eroding nocturnal inversion by 0.8‐hr and even prevent the transition of the boundary layer from happening for 12% of decoupled cases, keeping the boundary layer in a stable state during the noontime. On the other hand, when clouds are coupled with the surface, cloud‐top radiative cooling can directly cool the upper boundary layer to facilitate sub‐cloud convection, leading to an unstable boundary layer in the earlier morning.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Shock to detonation transition of pentaerythritol tetranitrate (PETN) initially pressed to 1.65 g/cm 3

A novel set of experiments and reactive flow modeling of pentaerythritol tetranitrate (PETN) is presented. In this work, the specific phenomenon of shock to detonation transition is examined, where an initial, relatively weak shock is propagated into pressed PETN powder at 1.65 g/cm 3 and the subsequent buildup to detonation is observed experimentally. These experiments, in conjunction with reactant and products’ equations of state, are utilized for building reactive flow models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Single-crystal growth and superconductivity in RbNi 2 Se 2

Herein we report the synthesis and characterization of RbNi 2 Se 2 , an analog of the iron chalcogenide superconductor Rb x Fe 2 Se 2 , via transport, angle-resolved photoemission spectroscopy, and density functional theory calculations. A superconducting transition at T c =1.20 K is identified. In the normal state, RbNi 2 Se 2 shows paramagnetic and Fermi-liquid behaviors. A large Sommerfeld coefficient yields an effective electron mass of m* ≈ 6m e . In the superconducting state, zero-field electronic specific-heat data C es can be described by a two-gap BCS model, indicating that RbNi 2 Se 2 is a possible multigap superconductor. Our density functional theory calculations and angle-resolved photoemission spectroscopy measurements demonstrate that RbNi 2 Se 2 exhibits relatively weak correlations and multiband characteristics, consistent with the multigap superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

PyLRO: A Python calculator for analyzing long-range structural order

We present PyLRO, an open-source Python calculator designed to detect, quantify, and display long-range order in periodic structures. The program’s design methodology, workflow, and approach to order quantification are described and demonstrated using a simple toy model. Additionally, we apply PyLRO to a series of metastable AlPO 4 structural intermediates from a prior high-pressure study, demonstrating how to compute and visualize structural order in all directions on a Miller sphere. We further highlight the program’s capabilities through a high-throughput analysis of structural patterns in the pressure-induced amorphization of AlPO 4 , revealing atomistic insights into specific energy regions of massive amorphous structures. These results suggest that PyLRO can be a valuable tool for investigating crystal–amorphous transition in materials research.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Mapping resonant inelastic x-ray scattering onto electronic structure of iridium compounds

Resonant inelastic X-ray scattering (RIXS) is an indispensable tool that can selectively probe the electronic structure of active sites in energy conversion systems, for example, iridium oxides. However, decoding the RIXS spectra remains challenging due to its inherently complex many-body interactions. Here, we analyze Ir L 3 edge RIXS spectra of Ir, IrCl 3 , and IrO 2 , employing the joint density of states (JDOS) calculated directly from electronic band-structure calculations. The overall energy-loss features in the RIXS spectra are well reproduced by the JDOS, reaffirming the close correspondence between electron–hole excitations and RIXS spectra observed in prior studies. Intriguingly, the RIXS spectra above ∼4 eV in metallic Ir and IrO 2 follow a power-law behavior, 𝐼 RIXS ~Δ −𝑝 , where Δ is the energy loss and p is the associated power-law exponent. This is consistent with edge-singularity behavior commonly found in resonant X-ray scattering from metallic samples. Furthermore, orbital-projected JDOS enables a decomposition of the IrO 2 spectrum into specific dd transitions, providing a clear interpretation of orbital excitations and an efficient strategy for decoding RIXS spectra in iridium-based energy conversion systems.

5d↗
DOE OSTI2022

Design of a supervisory control system for autonomous operation of advanced reactors

Advanced reactors to be deployed in the coming decades will face deregulated energy markets, and may adopt flexible operation to boost profitability. To aid in the transition from baseload to flexible operation paradigm, autonomous operation is sought. This work focuses on the control aspect of autonomous operation. Specifically, a hierarchical control system is designed to support constraint enforcement during routine operational transients. Within the system, data-driven modeling, physics-based state observation, and classical control algorithms are integrated to provide an adaptable and robust solution. A 320 MW Fluoride-cooled High-temperature Pebble-bed Reactor is the design basis for demonstrating the proposed control system. The hierarchical control system consists of a supervisory layer and low-level layer. The supervisory layer receives requests to change the system's operating conditions (e.g., the current reactor power to meet a load -follow), and accepts or rejects them based on constraints that have been assigned. Constraints are issued to keep the plant within an optimal operating region. The low-level layer interfaces with the actuators of the system to fulfill requested changes, while maintaining tracking and regulation duties. Further, to accept requests at the supervisory layer, the Reference Governor algorithm was adopted. To model the dynamics of the reactor, a system identification algorithm, Dynamic Mode Decomposition, was utilized. To estimate the evolution of process variables that cannot be directly measured (e.g., the propagation of delayed neutron precursors), the Unscented Kalman Filter, incorporating a nonlinear model of nuclear dynamics, was adopted. The composition of these algorithms led to a numerical demonstration of constraint enforcement during a 40% power drop transient (at a rate of 5 %/min). Uncontrolled secondary-side temperatures were successfully constrained. Adaptability of the proposed system was demonstrated by modifying the constraint values, and enforcing them during the transient. Robustness was also demonstrated by enforcing constraints under noisy environments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Entangled spin-polarized excitons from singlet fission in a rigid dimer

Abstract Singlet fission, a process that splits a singlet exciton into a biexciton, has promise in quantum information. We report time-resolved electron paramagnetic resonance measurements on a conformationally well-defined acene dimer molecule, TIPS-BP1', designed to exhibit strongly state-selective relaxation to specific magnetic spin sublevels. The resulting optically pumped spin polarization is a nearly pure initial state from the ensemble. The long-lived spin coherences modulate the signal intrinsically, allowing a measurement scheme that substantially removes noise and uncertainty in the magnetic resonance spectra. A nonadiabatic transition theory with a minimal number of spectroscopic parameters allows the quantitative assignment and interpretation of the spectra. In this work, we show that the rigid dimer TIPS-BP1' supports persistent spin coherences at temperatures far higher than those used in conventional superconducting quantum hardware.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Unusual 5f magnetism in new kagome material UV 6 Sn 6

Materials in the family R V 6 Sn 6 (R = rare earth) provide a unique platform to investigate the interplay between local moments from R layers and nonmagnetic vanadium kagome layers. Yet, the investigation of actinide members remains scarce. Here we report the synthesis of UV 6 Sn 6 single crystals through the self-flux technique. Physical property measurements reveal two uranium-driven antiferromagnetic transitions at T N 1 = 29 K and T N 2 = 24 K, a complex field-temperature phase diagram, and unusual negative domain-wall magnetoresistance. Specific heat and angle-resolved photoemission spectroscopy measurements show a moderate f -electron enhancement to the density of states at the Fermi level (EF), whereas our band structure calculations place the vanadium flat bands 0.25 eV above E F . These findings point to a materials opportunity to expand the uranium 166 family with the goal of enhancing correlations by tuning 5 f and 3 d flat bands to E F .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Photo-induced electron paramagnetic resonance: A means to identify defects and the defect level throughout the bandgap of ultrawide bandgap semiconductors

Ultrawide bandgap semiconductors (UWBGs) provide great promise for optical devices operating in the near to deep ultraviolet, and recently they have become a viable semiconducting material for high power electronics. From the power grid to electronic vehicles, the intention is to replace massively awkward components with the convenience of a solid state electronic “chip.” Unfortunately, the challenges faced by wide bandgap electronic materials, such as GaN and SiC, increase as the bandgap increases. A point defect, for example, can take on more charge states and energy configurations. This perspective describes a method to investigate the many charge states and their associated transitions—photo-induced electron paramagnetic resonance (photo-EPR) spectroscopy. Although not new to the study of defects in semiconductors, photo-EPR studies can probe the entire ultrawide bandgap given the appropriate light source for excitation. Examples provided here cover specific defects in UWBGs, AlN, and Ga2O3. The discussion also reminds us how the rapid pace of discovery surrounding this newest class of semiconductors is due, in part, to fundamental research studies of the past, some as far back as a century ago and some based on very different materials systems.

Physics↗
DOE OSTI2020

Spin-orbit-controlled metal–insulator transition in Sr 2 IrO 4

In the context of correlated insulators, where electron–electron interactions (U) drive the localization of charge carriers, the metal–insulator transition is described as either bandwidth- or filling-controlled. Motivated by the challenge of the insulating phase in Sr 2 IrO 4 , a new class of correlated insulators has been proposed, in which spin–orbit coupling (SOC) is believed to renormalize the bandwidth of the half-filled j eff = 1/2 doublet, allowing a modest U to induce a charge-localized phase. Although this framework has been tacitly assumed, a thorough characterization of the ground state has been elusive. Furthermore, direct evidence for the role of SOC in stabilizing the insulating state has not been established, because previous attempts at revealing the role of SOC have been hindered by concurrently occurring changes to the filling. Here, we overcome this challenge by employing multiple substituents that introduce well-defined changes to the signatures of SOC and carrier concentration in the electronic structure, as well as a new methodology that allows us to monitor SOC directly. Specifically, we study Sr 2 Ir 1-x T x O 4 (T = Ru, Rh) by angle-resolved photoemission spectroscopy, combined with ab initio and supercell tight-binding calculations. This allows us to distinguish relativistic and filling effects, thereby establishing conclusively the central role of SOC in stabilizing the insulating state of Sr 2 IrO 4 . Most importantly, we estimate the critical value for SOC in this system to be λ c = 0.42 ± 0.01 eV, and provide the first demonstration of a spin–orbit-controlled metal–insulator transition.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Nature of S-States in the Oxygen-Evolving Complex Resolved by High-Energy Resolution Fluorescence Detected X-ray Absorption Spectroscopy

Photosystem II, the water splitting enzyme of photosynthesis, utilizes the energy of sunlight to drive the four-electron oxidation of water to dioxygen at the oxygen-evolving complex (OEC). The OEC harbors a Mn 4 CaO 5 cluster that cycles through five oxidation states S i (i = 0–4). The S 3 state is the last metastable state before the O 2 evolution. Its electronic structure and nature of the S 2 → S 3 transition are key topics of persisting controversy. Most spectroscopic studies suggest that the S 3 state consists of four Mn(IV) ions, compared to the Mn(III)Mn(IV) 3 of the S 2 state. However, recent crystallographic data have received conflicting interpretations, suggesting either metal- or ligand-based oxidation, the latter leading to an oxyl radical or a peroxo moiety in the S 3 state. Herein, we utilize high-energy resolution fluorescence detected (HERFD) X-ray absorption spectroscopy to obtain a highly resolved description of the Mn K pre-edge region for all S-states, paying special attention to use chemically unperturbed S 3 state samples. In combination with quantum chemical calculations, we achieve assignment of specific spectroscopic features to geometric and electronic structures for all S-states. These data are used to confidently discriminate between the various suggestions concerning the electronic structure and the nature of oxidation events in all observable catalytic intermediates of the OEC. Our results do not support the presence of either peroxo or oxyl in the active configuration of the S 3 state. This establishes Mn-centered storage of oxidative equivalents in all observable catalytic transitions and constrains the onset of the O–O bond formation until after the final light-driven oxidation event.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Exploring Electrocatalysis of Methane on Transition Metal Surfaces (Final Technical Report)

The original primary objective of this project focused on detailed and systematic molecular-level mechanistic studies of low-temperature (~100 °C) electrochemical (EC) direct methane-to-methanol (DMTM) conversion on selected transition metal surfaces. The latter include PtRu, PdAu, and NiCu electrocatalysts. Specifically, the proposed studies aimed to test a bifunctional hypothetical DMTM reaction mechanism on these electrocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Anomalous electrical transport behavior in the vicinity of the first-order magnetostructural transition in the giant magnetocaloric Gd 4 ScGe 4

Here, magnetic, specific heat, and electrical transport measurements of Gd 4 ScGe 4 single crystals reveal sharp, discontinuous, nearly anhysteretic first-order magnetostructural transformation at $T_C$ = 63 K. The electrical resistivity exhibits two distinct regions where it increases with decreasing temperature: between $T_C$ and 120 K, as well as below 3 K; electronic transport remains conventionally metallic at all other measured temperatures, up to 325 K. The dispersion of charge carriers due to electron-paramagnon scattering is the likely reason for the observed anomalous transport above $T_C$. Additionally, the existence of intermediate lattice states near the transition recognized by the spike in the interslab Ge-Ge distances is expected to reduce the mean free path of the electrons contributing to the unusual behavior of the electrical resistivity between $T_C$ and 120 K. Beyond conventional electronic and lattice terms, the third component of likely magnetic origin contributes to the low-temperature heat capacity; the presence of spin waves may be responsible for the increased electron-magnon scattering below 3 K. Minor magnetocrystalline anisotropy is observed with the b axis as the easy magnetization axis in Gd 4 ScGe 4 . A negative deviation from linearity in the temperature dependence of the inverse magnetic susceptibility is detected below 150 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Time-resolved X-ray Spectroscopy from the Atomic Orbital Ground State Up

X-ray spectroscopy has been a key method to determine ground and excited state properties of quantum materials with atomic specificity. Now, new x-ray facilities are opening the door to the study of pump-probe x-ray spectroscopy - specifically time-resolved x-ray absorption (trXAS) and time-resolved resonant inelastic x-ray scattering (trRIXS). In this paper we will present simulations of each of these spectroscopies using a time-domain full atomic multiplet, charge transfer Hamiltonian, adapted to study the properties of a generalized cluster model including a central transition metal ion caged by ligand atoms in a planar geometry. The numerically evaluated trXAS and trRIXS cross-sections for representative electron configurations 3d9 and 3d8 demonstrate the insights that can be obtained from charge transfer pumping, and how this nonequilibrium process affects ground and excited state properties. The straightforward characterization of the excitations in these systems, based on our analysis of the simulations, can serve as a benchmark for future experiments, as access to these time-resolved spectroscopic techniques becomes more widely available.

Jost, Daniel↗