Search NASA⌕ Search

SEARCH · Search NASA

Results for “tunable mechanical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Noncontact Andreev Reflection as a Direct Probe of Superconductivity on the Atomic Scale

Direct detection of superconductivity has long been a key strength of point-contact Andreev reflection. However, its applicability to atomic-scale imaging is limited by the mechanical contact of the Andreev probe. To this end, we present a new method to probe Andreev reflection in a tunnel junction, leveraging tunneling spectroscopy and junction tunability to achieve quantitative detection of Andreev scattering. This method enables unambiguous assignment of superconducting origins of current-carrying excitations, as well as detection of higher order Andreev processes in atomic-scale junctions. Herein, we furthermore revealed distinct sensitivity of Andreev reflection to natural defects, such as step edges, even in classical superconductors. The methodology opens a new path to nano- and atomic-scale imaging of superconducting properties, including disordered superconductors and proximity to phase transitions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Magnetized, radiofrequency-driven hollow cathode chemical-vapor deposition of ultrathick hydrogenated amorphous carbon

Amorphous carbon is an attractive material for next-generation inertial confinement fusion (ICF) ablators due to its amorphous structure, tunable density, compatibility with dopants, chemical inertness, and mechanical robustness. Ablators are typically deposited as ultrathick (10–200 μm) coatings on removable spherical templates. The deposition of such thick amorphous carbon films is challenging due to high intrinsic compressive stress, which causes film buckling and delamination. Here, we study the deposition of amorphous carbon films by magnetized, radiofrequency-driven hollow cathode chemical vapor deposition with a custom-designed source in Ne plasmas. Emphasis is on the hollow-cathode source design and effects of the plasma discharge power and the precursor flow rate on film properties. We demonstrate deposition rates of >1 μm/h for films with hydrogen content of ∼40 at. %, densities of 1.1–1.7 g/cm 3 , and trace quantities of oxygen impurities. In conclusion, we also demonstrate the feasibility of depositing thick hydrogenated amorphous carbon films (∼30 μm) for ICF applications.

Carbon based materials↗
DOE OSTI2022

Self-assembly of cocontinuous nanostructured copolymer templates with compositional and architectural dispersity. Final Report

Cocontinuous nanostructured materials in which multiple domains of different materials simultaneously span three dimensional space offer opportunities to achieve combined properties not possible with a single homogeneous material. These architectures have importance in a broad range of energy-relevant technologies including batteries, supercapacitors, fuel cells, separation membranes, and catalysts. Achieving such structures in polymeric materials has been of long-standing interest in the field, due to both the inherently attractive properties of cocontinuous polymer morphologies as well as their ability to serve as templates for other functional nanostructured materials. Our work on this project has established that randomly-linked polymer architectures constructed from two immiscible polymer strands provide robust and highly tunable approaches to disordered cocontinuous nanostructures. In particular, we developed a detailed understanding of how the parameters (linker functionality and strand length, asymmetry, and dispersity) of randomly-linked networks controlled the breadth of the cocontinuous window over which both phases remain percolated. We further characterized how these nanostructures undergo orientation, while retaining cocontinuity, under mechanical deformation. We also compared their behavior to that of random multi-block polymers of linear architecture, which show similar propensity to form disordered nanostructures, albeit over narrower ranges of parameter space. Finally, we have explored the development of functional polymer nanostructures and composites based in part on the fundamental understanding obtained via this project.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Quasimolecular 𝐽 tet = 3/2 Moments in the Cluster Mott Insulator GaTa 4 ⁢Se 8

Quasimolecular orbitals in cluster Mott insulators provide a route to tailor exchange interactions, which may yield novel quantum phases of matter. Here, we demonstrate the cluster Mott character of the lacunar spinel GaTa 4 Se 8 using resonant inelastic x-ray scattering (RIXS) at the Ta L 3 edge. Electrons are fully delocalized over Ta 4 tetrahedra, forming quasimolecular J tet = 3/2 moments. The modulation of the RIXS intensity as function of the transferred momentum q allows us to determine the cluster wave function, which depends on competing intracluster hopping terms that mix states with different character. This mixed wave function is decisive for the macroscopic properties since it affects intercluster hopping and exchange interactions and furthermore renormalizes the effective spin-orbit coupling constant. The versatile wave function, tunable via intracluster hopping, opens a new perspective on the large family of lacunar spinels and cluster Mott insulators in general.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Reflectin: Protein Driver of Dynamically Tunable Biophotonics; New Paradigm for Tunably Reconfigurable Materials

We discovered that the reflectins, with architecture and sequences unlike those of any other proteins known, exhibit a novel interplay between signal-controlled nucleation and growth of dynamically arrested liquid-liquid phase-segregated assemblies that uniquely enables the continuous and precise fine-tuning of physical properties governing the color and brightness of light reflected from the membrane-enclosed nanostructures that contain them. Our research included high-resolution structural analyses conducted at the DOE-BES user facilities of the Stanford Synchrotron Light Source and LBL National Laboratory’s Molecular Foundry, leveraging their capabilities for time-resolved SAXS and cryo-TEM with our ongoing genetic engineering, biophysical and computational analyses to identify the structural determinants and mechanisms governing the dynamic behaviors of the reflectins. We augmented these methods with EPR analyses that revealed for the first time the existence of a specific pathway of reflectin assembly. Using dynamic light scattering and continuously monitored circular dichroism and Raman microscopy, we elucidated the progression of structural changes underlying the mechanisms of signal-induced condensation, folding, assembly, liquefaction, dynamic arrest, regulation and reversal.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Structural characterization of ligand binding and pH-specific enzymatic activity of mouse Acidic Mammalian Chitinase

Chitin is an abundant biopolymer and pathogen-associated molecular pattern that stimulates a host innate immune response. Mammals express chitin-binding and chitin-degrading proteins to remove chitin from the body. One of these proteins, Acidic Mammalian Chitinase (AMCase), is an enzyme known for its ability to function under acidic conditions in the stomach but is also active in tissues with more neutral pHs, such as the lung. Here, we used a combination of biochemical, structural, and computational modeling approaches to examine how the mouse homolog (mAMCase) can act in both acidic and neutral environments. We measured kinetic properties of mAMCase activity across a broad pH range, quantifying its unusual dual activity optima at pH 2 and 7. We also solved high-resolution crystal structures of mAMCase in complex with oligomeric GlcNAcn, the building block of chitin, where we identified extensive conformational ligand heterogeneity. Leveraging these data, we conducted molecular dynamics simulations that suggest how a key catalytic residue could be protonated via distinct mechanisms in each of the two environmental pH ranges. These results integrate structural, biochemical, and computational approaches to deliver a more complete understanding of the catalytic mechanism governing mAMCase activity at different pH. Engineering proteins with tunable pH optima may provide new opportunities to develop improved enzyme variants, including AMCase, for therapeutic purposes in chitin degradation.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2008

Algorithms for Spectral Decomposition with Applications to Optical Plume Anomaly Detection

The analysis of spectral signals for features that represent physical phenomenon is ubiquitous in the science and engineering communities. There are two main approaches that can be taken to extract relevant features from these high-dimensional data streams. The first set of approaches relies on extracting features using a physics-based paradigm where the underlying physical mechanism that generates the spectra is used to infer the most important features in the data stream. We focus on a complementary methodology that uses a data-driven technique that is informed by the underlying physics but also has the ability to adapt to unmodeled system attributes and dynamics. We discuss the following four algorithms: Spectral Decomposition Algorithm (SDA), Non-Negative Matrix Factorization (NMF), Independent Component Analysis (ICA) and Principal Components Analysis (PCA) and compare their performance on a spectral emulator which we use to generate artificial data with known statistical properties. This spectral emulator mimics the real-world phenomena arising from the plume of the space shuttle main engine and can be used to validate the results that arise from various spectral decomposition algorithms and is very useful for situations where real-world systems have very low probabilities of fault or failure. Our results indicate that methods like SDA and NMF provide a straightforward way of incorporating prior physical knowledge while NMF with a tuning mechanism can give superior performance on some tests. We demonstrate these algorithms to detect potential system-health issues on data from a spectral emulator with tunable health parameters.

Srivastava, Askok N.↗
DOE OSTI2022

Luminescence from Self‐Trapped Excitons and Energy Transfers in Vacancy‐Ordered Hexagonal Halide Perovskite Cs 2 HfF 6 Doped with Rare Earths for Radiation Detection

Abstract Compared to halides Cs 2 HfX 6 (X = Cl, Br, I) with a vacancy‐ordered cubic double perovskite structure, the halide Cs 2 HfF 6 (CHF), with a hexagonal Bravais lattice, possesses a higher mass density and chemical stability for radiation detection. Luminescence properties and energy transfer mechanisms of rare‐earths‐doped CHF materials are studied here. The structure of CHF is identified as a new type of vacancy‐ordered hexagonal perovskite, with the same type of building blocks of the double perovskite but stacked with single layers. Density‐functional theory calculations reveal a large bandgap of CHF. A broad emission is observed from the pristine CHF host, which is suggested to be associated with self‐trapped excitons (STEs). A series of rare‐earths‐doped materials are designed utilizing the STE emissions, and efficient energy transfers from STEs and Tb 3+ to Eu 3+ are achieved for tunable emissions. The codoped material shows stable emission under X‐ray irradiation, with 10.2% reduction from its initial emission intensity, associated with possible structural evolution by radiation‐induced deformation of the soft host. The radiation responses of singly and codoped materials are evaluated, and the codoped material is found to be more sensitive to the radiation energy than the singly doped or pristine CHF for radiation detection.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electrochemical lithium extraction from hectorite ore

Electrochemical technologies add a unique dimension for ore refinement, representing tunable methods that can integrate with renewable energy sources and existing downstream process flows. However, the development of electrochemical extraction technologies has been impeded by the technological maturity of hydro- and pyro-metallurgy, as well as the electrical insulating properties of many metal oxide ores. The fabrication and use of carbon/insulating material composite electrodes has been a longstanding method to enable electrochemical activation. Here, using real hectorite ore, we employ this technical approach to fabricate hectorite-carbon black composite electrodes (HCCEs) and achieve electrochemical activation of hectorite. Anodic polarization results in lithium-ion release through a multi-step chemical and electrochemical mechanism that results in 50.7 ± 4.4% removal of lithium from HCCE, alongside other alkaline ions. This technical proof-of-concept study underscores that electrochemical activation of ores can facilitate lattice deterioration and ion removal from ores.

25 ENERGY STORAGE↗
DOE OSTI2022

Disentangling Memristive and Memcapacitive Effects in Droplet Interface Bilayers Using Dynamic Impedance Spectroscopy

The underlying principles for generating intelligent behavior in living organisms are fundamentally different from those in traditional solid-state circuits. Biomimetic neuromorphic equivalents based on biological membranes offer novel implementation of tunable plasticity and diverse mechanisms to control functionality. Here, dynamic electrochemical impedance spectroscopy (dEIS) to probe diphytanoylphosphatidylcholine (DPhPC) droplet interface bilayers (DIBs) to better understand the differences in molecular level structure/dynamics that give rise to hysteretic loops and neuromorphic, memelement behaviors in lipid bilayers in response to electrical biasing is used. Importantly, this system does not have ion-conducting channels and is, therefore, not expected to show memristive behavior. Surprisingly, both memristive and memcapacitive behaviors by measuring the time-dependent complex impedance of DPhPC DIBs are detected. Furthermore, it is shown that nonlinear memristance can originate from structural changes in the bilayer, affecting its dielectric properties. This novel dEIS application allows for the simultaneous analysis of the system's changing memristive and memcapacitive properties, which originate from different molecular restructuring processes. Moreover, and importantly, access to this type of information increases the number of neuromorphic processes supported simultaneously in a single two-terminal device.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effect of heating/cooling dynamics in the hysteresis loop and tunable IR emissivity of VO 2 thin films

We experimentally investigate the semiconductor-to-metal transition (SMT) in vanadium dioxide thin films using an infrared thermographic technique. During the semiconductor to metal phase change process, VO 2 optical properties dynamically change and infrared emission undergoes a hysteresis loop due to differences between heating and cooling stages. The shape of the hysteresis loop was accurately monitored under different dynamic heating/cooling rates. In order to quantify and understand the effects of different rates, we used a numerical modelling approach in which a VO 2 thin layer was modeled as metamaterial. The main experimental findings are interpreted assuming that both the rate of formation and shape of metallic inclusions are tuned with the heating/cooling rate. The structural transition from monoclinic to tetragonal phases is the main mechanism for controlling the global properties of the phase transition. However, our experimental results reveal that the dynamics of the heating/cooling process can become a useful parameter for further tuning options and lays out a macroscopic optical sensing scheme for the microscopic phase change dynamics of VO 2 . Our study sheds light on phase-transition dynamics and their effect on the infrared emission spectra of VO 2 thin films, therefore enabling the heating/cooling rate to be an additional parameter to control infrared emission characteristics of thermal emitters. The hysteresis loop represents the phase coexistence region, thus being of fundamental importance for several applications, such as the operation of radiative thermal logic elements based on phase transition materials. For such applications, the phase transition region is shifted for heating and cooling processes. We also show that, depending on the way the phase change elements are heated, the temperature operation range will be slightly modified.

42 ENGINEERING↗
DOE OSTI2022

Evidence for 4e charge of Cooper quartets in a biased multi-terminal graphene-based Josephson junction

Abstract In a Josephson junction (JJ) at zero bias, Cooper pairs are transported between two superconducting contacts via the Andreev bound states (ABSs) formed in the Josephson channel. Extending JJs to multiple superconducting contacts, the ABSs in the Josephson channel can coherently hybridize Cooper pairs among different superconducting electrodes. Biasing three-terminal JJs with antisymmetric voltages, for example, results in a direct current (DC) of Cooper quartet (CQ), which involves a four-fermion entanglement. Here, we report half a flux periodicity in the interference of CQ formed in graphene based multi-terminal (MT) JJs with a magnetic flux loop. We observe that the quartet differential conductance associated with supercurrent exhibits magneto-oscillations associated with a charge of 4 e , thereby presenting evidence for interference between different CQ processes. The CQ critical current shows non-monotonic bias dependent behavior, which can be modeled by transitions between Floquet-ABSs. Our experimental observation for voltage-tunable non-equilibrium CQ-ABS in flux-loop-JJs significantly extends our understanding of MT-JJs, enabling future design of topologically unique ABS spectrum.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Unveiling the Degradation Nature of Pt/NbOx/C Catalysts for Oxygen Reduction Reaction via in situ X-ray Absorption Spectroscopy

Among various metal nanoparticles supported on metal oxide (MMO) catalysts, the Pt/NbOx/C system has promising oxygen reduction reaction (ORR) activity as cathode for proton exchange membrane fuel cells (PEMFCs). Herein, we study a series of Pt/NbOx/C catalysts with tunable structural and electronic properties via physical vapor deposition and unravel the nature of metal and metal oxide interaction (MMOI) by characterizing this system under reactive conditions. By conducting in situ X-ray absorption spectroscopy (XAS) experiments, we demonstrate the Pt preferably interacts with O but not Nb in the Pt/NbOx/C system and such Pt-O interaction benefits the ORR activity via electronic effect rather than strain effect. We also provide clear evidence for the formation of metallic Nb phase at the early stage of PEMFC operation and identify severe particle growth of Pt after long-term PEMFC operation. These findings deepen our understanding of the degradation mechanism of MMO catalysts during long-term PEMFC operation.

MMO catalyst↗
DOE OSTI2020

Tunable structural color of bottlebrush block copolymers through direct-write 3D printing from solution

Additive manufacturing of functional materials is limited by control of microstructure and assembly at the nanoscale. In this work, we integrate nonequilibrium self-assembly with direct-write three-dimensional (3D) printing to prepare bottlebrush block copolymer (BBCP) photonic crystals (PCs) with tunable structure color. After varying deposition conditions during printing of a single ink solution, peak reflected wavelength for BBCP PCs span a range of 403 to 626 nm (blue to red), corresponding to an estimated change in d-spacing of >70 nm (Bragg- Snell equation). Physical characterization confirms that these vivid optical effects are underpinned by tuning of lamellar domain spacing, which we attribute to modulation of polymer conformation. Using in situ optical microscopy and solvent-vapor annealing, we identify kinetic trapping of metastable microstructures during printing as the mechanism for domain size control. More generally, we present a robust processing scheme with potential for on-the-fly property tuning of a variety of functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Depolymerization of PET by common alkanolamines yields tunable monomers to expand the design space of 3D-printable, intrinsically self-healing polyamide-ionenes

Polyethylene terephthalate (PET), a ubiquitous thermoplastic used in textiles and packaging, is one of the primary contributors to plastic pollution. While PET is also one of the most recycled plastics, it has value as a rich source of chemical building blocks. When PET is depolymerized by amino alcohols (“alkanolamines”) such as monoethanolamine (MEA), terephthalamide-diol molecules are produced. In the presence of thionyl chloride (SOCl2), these diols are amenable to transformation to the corresponding dichloride monomers, which can then be polymerized via condensation methods (i.e., Menshutkin reaction) with bisimidazole compounds followed by ion-exchange to yield polyamide (PA)-ionenes with tailored structures. The PA-ionenes produced from these methods are intrinsically self-healing and possess thermal and mechanical properties which make them amenable to 3D printing. This study reports on synthetic methods and structure–property relationships in PA-ionenes that arise from the choice of molecular building blocks.

Bepari, Mousumi R. [Univ. of Alabama, Tuscaloosa, ↗
DOE OSTI2024

Tailoring Piezoelectricity of 3D Printing PVDF-MoS 2 Nanocomposite via In Situ Induced Shear Stress

3D printing of unique structures with tunable properties offers significant advantages in the fabrication of complex and customized electronic devices. Here, this study introduces a process-microstructure–property-guided manufacturing route to fabricate PVDF-2D MoS 2 piezoelectric nanocomposites with tunable piezoelectric properties without having a postprocess. We control PVDF’s microstructure through direct ink writing (DIW) 3D printing while tuning PVDF-MoS 2 interfacial strain by controlling rheology and 3D printing parameters, such as nozzle size and printing speed. Our approach demonstrates tunable piezoelectricity in PVDF-MoS 2 , achieving a 15-fold increase in the piezoelectric coefficient (d 33 ) at a printing-induced shear stress of 6685 Pa. This enhancement arises from the electrostatic interactions between PVDF and MoS 2 and the filler distribution and alignment caused by the in situ shear stress in 3D printing, as confirmed by XPS and Raman mapping analyses. Our findings advance the understanding of piezoelectric mechanisms in PVDF-based nanocomposites, laying the foundation for 3D printing of piezoelectric sensors in wearable device applications with enhanced performance and customization capabilities.

2D MoS2↗
DOE OSTI2021

Design, synthesis, and characterization of vinyl-addition polynorbornenes with tunable thermal properties

Unfunctionalized vinyl-addition polynorbornene (VAPNB) possesses many outstanding properties such as high thermal, chemical, and oxidative stability. These features make VAPNB a promising candidate for many engineering applications. However, VAPNB has a small service window between its glass transition temperature (T g ) and decomposition temperature (T d ), and it cannot be readily processed in a melt state. In this work, we demonstrate that the service window of VAPNBs can be tailored through the use of norbornene monomers bearing alkyl, aryl, and aryl ether substituents. The vinyl addition homopolymerization and copolymerization of these functionalized norbornyl-based monomers yielded VAPNBs with high T' g s (>150 °C) and large service windows (T d –T g > 100 °C), which are comparable to other commercial engineering thermoplastics. To further establish the feasibility of melt processing, a functionalized VAPNB material with T g = 209 °C and a service window of 170 °C was successfully extruded and molded into bars. Subsequent characterization of the bars by dynamic mechanical analysis (DMA), nuclear magnetic resonance spectroscopy (NMR), and gel permeation chromatography (GPC) revealed only minor signs of polymer degradation. Furthermore, these studies suggest that substituted VAPNBs could be developed into a new class of engineering thermoplastics that is compatible with workhorse melt processing techniques such as extrusion and injection molding, as well as emerging techniques such as extrusion-based 3D printing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Peptoid-based hierarchically-structured biomimetic nanomaterials: Synthesis, characterization and applications

Peptoids (or poly-N-substituted glycines) is a promising class of bioinspired sequence-defined polymers due to their highly efficient synthesis, high chemical stability, enzyme hydrolysis resistance, and biocompatibility. By tuning the side chain chemistry of peptoids, it allows for a precise control over sequences and achieving a large side-chain diversity. Due to these unique features, in the last several years, many amphiphilic peptoids were designed as highly tunable building blocks for the preparation of biomimetic nanomaterials with well-defined hierarchical structures and desired functionalities. In this paper, we provide an overview of the recent achievements in this area by dividing them into the following three aspects. First, mica- and silica-templated peptoid self-assembly was summarized. Here, the presence of inorganic substrates provides the guarantee of investigating their self-assembly mechanisms and interactions between peptoids and substrates using nanoscale characterization techniques, particularly in situ atomic force spectroscopy (AFM) and AFM-based dynamic force spectroscopy (AFM-DFS). Second, solution-phase self-assembly of peptoids into nanotubes and nanosheets was presented, as well as their self-repair properties. Third, the applications of peptoid based nanomaterials were outlined, including the construction of catalytic nanomaterials as a template and cytosolic delivery as cargoes.

36 MATERIALS SCIENCE↗