Search NASA⌕ Search

SEARCH · Search NASA

Results for “variational optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Numerical methods for the inverse problem of density functional theory

Here, the inverse problem of Kohn–Sham density functional theory (DFT) is often solved in an effort to benchmark and design approximate exchange-correlation potentials. The forward and inverse problems of DFT rely on the same equations but the numerical methods for solving each problem are substantially different. We examine both problems in this tutorial with a special emphasis on the algorithms and error analysis needed for solving the inverse problem. Two inversion methods based on partial differential equation constrained optimization and constrained variational ideas are introduced. We compare and contrast several different inversion methods applied to one-dimensional finite and periodic model systems.

97 MATHEMATICS AND COMPUTING↗

Prediction of {sup 2}D Rydberg energy levels of {sup 6}Li and {sup 7}Li based on very accurate quantum mechanical calculations performed with explicitly correlated Gaussian functions

Very accurate variational nonrelativistic finite-nuclear-mass calculations employing all-electron explicitly correlated Gaussian basis functions are carried out for six Rydberg {sup 2}D states (1s{sup 2}nd, n= 6, Horizontal-Ellipsis , 11) of the {sup 7}Li and {sup 6}Li isotopes. The exponential parameters of the Gaussian functions are optimized using the variational method with the aid of the analytical energy gradient determined with respect to these parameters. The experimental results for the lower states (n= 3, Horizontal-Ellipsis , 6) and the calculated results for the higher states (n= 7, Horizontal-Ellipsis , 11) fitted with quantum-defect-like formulas are used to predict the energies of {sup 2}D 1s{sup 2}nd states for {sup 7}Li and {sup 6}Li with n up to 30.

74 ATOMIC AND MOLECULAR PHYSICS↗

A technique for integrating engine cycle and aircraft configuration optimization

A method for conceptual aircraft design that incorporates the optimization of major engine design variables for a variety of cycle types was developed. The methodology should improve the lengthy screening process currently involved in selecting an appropriate engine cycle for a given application or mission. The new capability will allow environmental concerns such as airport noise and emissions to be addressed early in the design process. The ability to rapidly perform optimization and parametric variations using both engine cycle and aircraft design variables, and to see the impact on the aircraft, should provide insight and guidance for more detailed studies. A brief description of the aircraft performance and mission analysis program and the engine cycle analysis program that were used is given. A new method of predicting propulsion system weight and dimensions using thermodynamic cycle data, preliminary design, and semi-empirical techniques is introduced. Propulsion system performance and weights data generated by the program are compared with industry data and data generated using well established codes. The ability of the optimization techniques to locate an optimum is demonstrated and some of the problems that had to be solved to accomplish this are illustrated. Results from the application of the program to the analysis of three supersonic transport concepts installed with mixed flow turbofans are presented. The results from the application to a Mach 2.4, 5000 n.mi. transport indicate that the optimum bypass ratio is near 0.45 with less than 1 percent variation in minimum gross weight for bypass ratios ranging from 0.3 to 0.6. In the final application of the program, a low sonic boom fix a takeoff gross weight concept that would fly at Mach 2.0 overwater and at Mach 1.6 overland is compared with a baseline concept of the same takeoff gross weight that would fly Mach 2.4 overwater and subsonically overland. The results indicate that for the design mission, the low boom concept has a 5 percent total range penalty relative to the baseline. Additional cycles were optimized for various design overland distances and the effect of flying off-design overland distances is illustrated.

Geiselhart, Karl A.↗

Refinement of the experimental energy levels of higher {sup 2}D Rydberg states of the lithium atom with very accurate quantum mechanical calculations

Very accurate variational non-relativistic calculations are performed for four higher Rydberg {sup 2}D states (1s{sup 2}nd{sup 1}, n= 8, ..., 11) of the lithium atom ({sup 7}Li). The wave functions of the states are expanded in terms of all-electron explicitly correlated Gaussian functions and finite nuclear mass is used. The exponential parameters of the Gaussians are optimized using the variational method with the aid of the analytical energy gradient determined with respect to those parameters. The results of the calculations allow for refining the experimental energy levels determined with respect to the {sup 2}S 1s{sup 2}2s{sup 1} ground state.

74 ATOMIC AND MOLECULAR PHYSICS↗

Adaptive pruning-based optimization of parameterized quantum circuits

Abstract Variational hybrid quantum–classical algorithms are powerful tools to maximize the use of noisy intermediate-scale quantum devices. While past studies have developed powerful and expressive ansatze, their near-term applications have been limited by the difficulty of optimizing in the vast parameter space. In this work, we propose a heuristic optimization strategy for such ansatze used in variational quantum algorithms, which we call ‘parameter-efficient circuit training (PECT)’. Instead of optimizing all of the ansatz parameters at once, PECT launches a sequence of variational algorithms, in which each iteration of the algorithm activates and optimizes a subset of the total parameter set. To update the parameter subset between iterations, we adapt the Dynamic Sparse Reparameterization scheme which was originally proposed for training deep convolutional neural networks. We demonstrate PECT for the Variational Quantum Eigensolver, in which we benchmark unitary coupled-cluster ansatze including UCCSD and k -UpCCGSD, as well as the Low-Depth Circuit Ansatz (LDCA), to estimate ground state energies of molecular systems. We additionally use a layerwise variant of PECT to optimize a hardware-efficient circuit for the Sycamore processor to estimate the ground state energy densities of the one-dimensional Fermi-Hubbard model. From our numerical data, we find that PECT can enable optimizations of certain ansatze that were previously difficult to converge and more generally can improve the performance of variational algorithms by reducing the optimization runtime and/or the depth of circuits that encode the solution candidate(s).

Physics↗

Reshaping of Truncated Pd Nanocubes: Energetic and Kinetic Analysis Integrating Transmission Electron Microscopy with Atomistic-Level and Coarse-Grained Modeling

Stability against reshaping of metallic fcc nanocrystals synthesized with tailored far-from-equilibrium shapes is key to maintaining optimal properties for applications such as catalysis. Yet Arrhenius analysis of experimental reshaping kinetics, and appropriate theory and simulation, is lacking. As such, we use TEM to monitor the reshaping of Pd nanocubes of ~25 nm side length between 410 °C (over ~4.5 h) and 440 °C (over ~0.25 h), extracting a high effective energy barrier of E eff ≈ 4.6 eV. We also provide an analytic determination of the energy variation along the optimal pathway for reshaping that involves transfer of atoms across the nanocube surface from edges or corners to form new layers on side {100} facets. The effective barrier from this analysis is shown to increase strongly with the degree of truncation of edges and corners in the synthesized nanocube. Theory matches experiment for the appropriate degree of truncation. In addition, we perform simulations of a stochastic atomistic-level model incorporating a realistic description of diffusive hopping for undercoordinated surface atoms, thereby providing a visualization of the initial reshaping process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of adsorption processes for climate control and thermal energy storage

Adsorption based heat-pumps have received significant interest owing to their promise of higher efficiencies and energy savings when coupled with waste heat and solar energy compared to conventional heating and cooling systems. While adsorption systems have been widely studied through computational analysis and experiments, general design guidelines to enhance their overall performance have not been proposed. In this work, we identified conditions suitable for the maximum utilization of the adsorbent to enhance the performance of both intermittent as well as continuously operating adsorption systems. A detailed computational model was developed based on a general framework governing adsorption dynamics in a single adsorption layer and pellet. We then validated the computational analysis using experiments with a model system of zeolite 13X-water for different operating conditions. A dimensional analysis was subsequently carried out to optimize adsorption performance for any desired operating condition, which is determined by the choice of adsorbent-vapor pair, adsorption duration, operational pressure, intercrystalline porosity, adsorbent crystal size, and intracrystalline vapor diffusivity. The scaling analysis identifies the critical dimensionless parameters and provides a simple guideline to determine the most suitable geometry for the adsorbent particles. Based on this selection criterion, the computational model was used to demonstrate maximum utilization of the adsorbent for any given operational condition. By considering a wide range of parametric variations for performance optimization, these results offer important insights for designing adsorption beds for heating and cooling systems. (C) 2014 Elsevier Ltd. All rights reserved.

Narayanan, S↗

{sup 1}D states of the beryllium atom: Quantum mechanical nonrelativistic calculations employing explicitly correlated Gaussian functions

Very accurate finite-nuclear-mass variational nonrelativistic calculations are performed for the lowest five {sup 1}D states (1s{sup 2} 2p{sup 2}, 1s{sup 2} 2s{sup 1} 3d{sup 1}, 1s{sup 2} 2s{sup 1} 4d{sup 1}, 1s{sup 2} 2s{sup 1} 5d{sup 1}, and 1s{sup 2} 2s{sup 1} 6d{sup 1}) of the beryllium atom ({sup 9}Be). The wave functions of the states are expanded in terms of all-electron explicitly correlated Gaussian functions. The exponential parameters of the Gaussians are optimized using the variational method with the aid of the analytical energy gradient determined with respect to those parameters. The calculations exemplify the level of accuracy that is now possible with Gaussians in describing bound states of a four-electron system where some of the electrons are excited into higher angular states.

74 ATOMIC AND MOLECULAR PHYSICS↗

Particle-Number Fluctuations and Correlations in Transfer Reactions Obtained Using the Balian-Veneroni Variational Principle

The Balian-Veneroni (BV) variational principle, which optimizes the evolution of the state according to the relevant observable, is used at the mean-field level to determine the particle-number fluctuations in fragments of many-body systems. For fermions, the numerical evaluation of such fluctuations requires the use of a time-dependent Hartree-Fock (TDHF) code. Proton, neutron, and total nucleon number fluctuations in fragments produced in collisions of two {sup 40}Ca are computed well above the fusion barrier. For deep-inelastic collisions, the fluctuations calculated from the BV variational principle are much larger than standard TDHF results, and closer to experimental fluctuations. Correlations between proton and neutron numbers are determined. These correlations are shown to be larger with exotic systems where charge equilibration occurs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Backflow Transformations via Neural Networks for Quantum Many-Body Wave Functions

Obtaining an accurate ground state wave function is one of the great challenges in the quantum many-body problem. In this Letter, we propose a new class of wave functions, neural network backflow (NNB). Here, the backflow approach, pioneered originally by Feynman and Cohen [Phys. Rev. 102, 1189 (1956)], adds correlation to a mean-field ground state by transforming the single-particle orbitals in a configuration-dependent way. NNB uses a feed-forward neural network to learn the optimal transformation via variational Monte Carlo calculations. NNB directly dresses a mean-field state, can be systematically improved, and directly alters the sign structure of the wave function. It generalizes the standard backflow [L. F. Tocchio et al., Phys. Rev. B 78, 041101(R) (2008)], which we show how to explicitly represent as a NNB. We benchmark the NNB on Hubbard models at intermediate doping, finding that it significantly decreases the relative error, restores the symmetry of both observables and single-particle orbitals, and decreases the double-occupancy density. Finally, we illustrate interesting patterns in the weights and bias of the optimized neural network.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Combined control-structure optimization

An approach for combined control-structure optimization keyed to enhancing early design trade-offs is outlined and illustrated by numerical examples. The approach employs a homotopic strategy and appears to be effective for generating families of designs that can be used in these early trade studies. Analytical results were obtained for classes of structure/control objectives with linear quadratic Gaussian (LQG) and linear quadratic regulator (LQR) costs. For these, researchers demonstrated that global optima can be computed for small values of the homotopy parameter. Conditions for local optima along the homotopy path were also given. Details of two numerical examples employing the LQR control cost were given showing variations of the optimal design variables along the homotopy path. The results of the second example suggest that introducing a second homotopy parameter relating the two parts of the control index in the LQG/LQR formulation might serve to enlarge the family of Pareto optima, but its effect on modifying the optimal structural shapes may be analogous to the original parameter lambda.

Salama, M.↗

Shape Stability of Truncated Octahedral fcc Metal Nanocrystals

Metallic nanocrystals (NCs) can be synthesized with tailored nonequilibrium shapes to enhance desired properties, e.g., octahedral fcc metal NCs optimize catalytic activity associated with {111} facets. However, maintenance of optimized properties requires stability against thermal reshaping. Thus, we analyze the reshaping of truncated fcc metal octahedra mediated by surface diffusion using a stochastic atomistic-level model with energetic input parameters for Pd. Furthermore, the model describes NC thermodynamics by an effective nearest-neighbor interaction and includes a realistic treatment of diffusive hopping for undercoordinated surface atoms. Kinetic Monte Carlo simulation reveals that the effective barrier, E eff , for the initial stage of reshaping is strongly tied to the degree of truncation of the vertices in the synthesized initial octahedral shapes. This feature is elucidated via exact analytic determination of the energy variation along the optimal reshaping pathway at low-temperature (T), which involves transfer of atoms from truncated {100} vertex facets to form new layers on {111} side facets. Deviations from predictions of the low-T analysis due to entropic effects are more prominent for higher T and larger NC sizes.

36 MATERIALS SCIENCE↗

Adaptive Replanning to Account for Lumpectomy Cavity Change in Sequential Boost After Whole-Breast Irradiation

Purpose: To evaluate the efficiency of standard image-guided radiation therapy (IGRT) to account for lumpectomy cavity (LC) variation during whole-breast irradiation (WBI) and propose an adaptive strategy to improve dosimetry if IGRT fails to address the interfraction LC variations. Methods and Materials: Daily diagnostic-quality CT data acquired during IGRT in the boost stage using an in-room CT for 19 breast cancer patients treated with sequential boost after WBI in the prone position were retrospectively analyzed. Contours of the LC, treated breast, ipsilateral lung, and heart were generated by populating contours from planning CTs to boost fraction CTs using an auto-segmentation tool with manual editing. Three plans were generated on each fraction CT: (1) a repositioning plan by applying the original boost plan with the shift determined by IGRT; (2) an adaptive plan by modifying the original plan according to a fraction CT; and (3) a reoptimization plan by a full-scale optimization. Results: Significant variations were observed in LC. The change in LC volume at the first boost fraction ranged from a 70% decrease to a 50% increase of that on the planning CT. The adaptive and reoptimization plans were comparable. Compared with the repositioning plans, the adaptive plans led to an improvement in target coverage for an increased LC case (1 of 19, 7.5% increase in planning target volume evaluation volume V{sub 95%}), and breast tissue sparing for an LC decrease larger than 35% (3 of 19, 7.5% decrease in breast evaluation volume V{sub 50%}; P=.008). Conclusion: Significant changes in LC shape and volume at the time of boost that deviate from the original plan for WBI with sequential boost can be addressed by adaptive replanning at the first boost fraction.

62 RADIOLOGY AND NUCLEAR MEDICINE↗