Search NASA⌕ Search

SEARCH · Search NASA

Results for “wave parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Interplay of superconducting, metallic, and crystalline states of composite fermions at 𝜈 = $\frac{1}{6}$ in wide quantum wells

Evidence for developing fractional quantum Hall effect (FQHE) at filling fraction 𝜈 = 1/6 and 1/8 was recently reported in wide GaAs quantum wells [Wang et al., Phys. Rev. Lett. 134, 046502 (2025)]. In this article, we theoretically investigate the nature of the state at 𝜈 = 1/6 as a function of the quantum well width and the density by considering composite-fermion (CF) crystals, CF Fermi sea, and various kinds of paired CF states. The 𝑓-wave paired state has the lowest energy among the paired CF states. However, for parameters of interest, the energies of the CF crystal, the CF Fermi liquid, and the 𝑓-wave paired CF state are too close to distinguish. We, therefore, predict that 𝑖𝑓 the FQHE at 𝜈 = 1/6 is experimentally confirmed, this state would be an 𝑓-wave paired state of CFs, which can be verified by measurement of its thermal Hall conductance. Exact diagonalization studies on clean systems with up to eight electrons show that the ground states at 𝜈 = 𝑛/(6⁢𝑛 ± 1) are incompressible for all widths and densities we have considered, and are well described by the corresponding Laughlin and Jain states. We propose a phase diagram for large quantum well widths and densities in which at zero disorder, incompressible FQHE states are stabilized at 𝜈 = 𝑛/(6⁢𝑛 ± 1) and 𝜈 = 1/6, but in between these fillings the CF crystal is stabilized. We also present a qualitative discussion on the effects of disorder and propose a schematic phase diagram based on it. With disorder, which creates a spatial variation in the filling factor, two regimes are identified: (i) for small disorder, when the incompressible states percolate at the special fillings, FQHE with quantized Hall plateaus and vanishing longitudinal resistance should occur; and (ii) for larger disorder, when the CF crystal percolates, the longitudinal resistance rises with decreasing temperature but the domains of FQHE liquid produce minima at the special filling factors. Here, experiments are consistent with the latter scenario. We also mention a possible connection of the phase diagram presented here to a puzzling behavior observed for the fractional quantum anomalous Hall effect in pentalayer graphene.

Composite fermions↗
DOE OSTI2020

Collisionless adiabatic afterglow

In this work, we study, by numerical and analytical means, the evolution of a collisionless plasma initiated between absorbing walls. The ensuing flow is described by rarefaction waves that travel inward from the boundaries, interact, and eventually vanish after crossing through, leading up to the asymptotic stage of the decay. Particle simulations indicate that the kinetic evolution strongly resembles one found in isentropic gas dynamics. Namely, a very gradual density profile forms in the expanding central region where the rarefaction waves interact, with an accompanying linear velocity profile. Asymptotically, the density falls off as 1/t. The density and the flux at the boundary show little variation over the period when rarefaction waves still exist. Plasma potential, on the other hand, drops quite rapidly (on the underlying ion-acoustic timescale) to less than initial electron temperature Te when over 70% of the particles still remain in the system. This is due to electron kinetics being governed by conservation of adiabatic invariant in a slowly varying potential well. Analytical model of the velocity distribution is presented to explain the simulations. The results have implications for afterglow plasmas used in material processing and also for ion-extraction devices. One property of potential interest is good uniformity of the decaying plasma that occurs after approximately one ion-acoustic time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Unbiased primordial gravitational wave inference from the CMB with SMICA

The detection of primordial gravitational waves in Cosmic Microwave Background B-mode polarization observations requires accurate and robust subtraction of astrophysical contamination. We show, using a blind Spectral Matching Independent Component Analysis, that it is possible to infer unbiased estimates of the primordial B-mode signal from ground-based observations of a small patch of sky even for highly complex foreground contamination. This work, originally performed in the context of configuration studies for a future CMB-S4 observatory, is highly relevant for the analysis of observations by the current generation of CMB experiments.

cosmological parameters from CMBR↗
DOE OSTI2026

Determining the Hubble constant through cross-correlation of galaxies and gravitational waves

Gravitational-wave (GW) standard sirens have the potential to measure the Hubble constant 𝐻 0 in the local Universe independent of the distance ladder and thus offer unique insights into the Hubble tension. A key challenge with standard sirens is detecting their electromagnetic counterparts and therefore assigning redshifts to the measured distances. One promising way to proceed is to utilize GW dark sirens—events without an identified electromagnetic counterpart—and cross-correlate their angular distribution with that of galaxies. We present a quantitative study of how precisely the Hubble constant can be measured using tomographic cross-correlation between galaxies and GW sources. Altogether, we find that the constraints on 𝐻 0 will be limited by the quality and quantity of GW data. We find that percent-level constraints on 𝐻 0 will primarily depend on achieving small distance uncertainties (𝜎 𝑑𝐿 = 0.1⁢𝑑 𝐿 ), obtaining a large number of GW dark sirens (≳ 5⁢000) and accurate sky localization in the tomographic analysis.

Cosmological parameters↗
DOE OSTI2026

The Simons Observatory: forecasted constraints on primordial gravitational waves with the expanded array of Small Aperture Telescopes

We present updated forecasts for the scientific performance of the degree-scale (0.5 deg FWHM at 93 GHz), deep-field survey to be conducted by the Simons Observatory (SO). By 2027, the SO Small Aperture Telescope (SAT) complement will be doubled from three to six telescopes, including a doubling of the detector count in the 93 GHz and 145 GHz channels to 48,160 detectors. Combined with a planned extension of the survey duration to 2035, this expansion will significantly enhance SO's search for a B-mode signal in the polarisation of the cosmic microwave background, a potential signature of gravitational waves produced in the very early Universe. Assuming a 1/f noise model with knee multipole ℓ knee = 50 and a moderately complex model for Galactic foregrounds, we forecast a 1σ (or 68% confidence level) constraint on the tensor-to-scalar ratio r of σ r = 1.2 × 10 -3 , assuming no primordial B-modes are present. This forecast assumes that 70% of the B-mode lensing signal can ultimately be removed using high resolution observations from the SO Large Aperture Telescope (LAT) and overlapping large-scale structure surveys. For more optimistic assumptions regarding foregrounds and noise, and assuming the same level of delensing, this forecast constraint improves to σ r = 7 × 10 -4 . These forecasts represent a major improvement in SO's constraining power, being a factor of around 2.5 times better than what could be achieved with the originally planned campaign, which assumed the existing three SATs would conduct a five-year survey.

CMBR experiments↗
DOE OSTI2021

Magnetic interactions and spin excitations in van der Waals ferromagnet VI 3

Using a combination of density functional theory (DFT) and spin-wave theory methods, we investigate the magnetic interactions and spin excitations in semiconducting VI 3 . Exchange parameters of monolayer, bilayer, and bulk forms are evaluated by mapping the magnetic energies of various spin configurations, calculated using DFT + U, onto the Heisenberg model. The intralayer couplings remain largely unchanged in three forms of VI 3 , while the interlayer couplings show stronger dependence on the dimensionality of the materials. We calculate the spin-wave spectra within a linear spin-wave theory and discuss how various exchange parameters affect the magnon bands. Here, the magnon–magnon interaction is further incorporated, and the Curie temperature is estimated using a self-consistently renormalized spin-wave theory. To understand the roles of constituent atoms on magnetocrystalline anisotropy energy (MAE), we resolve MAE into sublattices and find that a strong negative V-I inter-sublattice contribution is responsible for the relatively small easy-axis MAE in VI 3 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Nonlinear post-compression in multi-pass cells in the mid-IR region using bulk materials

We numerically investigate the regime of nonlinear pulse compression at mid-IR wavelengths in a multi-pass cell (MPC) containing a dielectric plate. This post-compression setup allows for ionization-free spectral broadening and self-compression while mitigating self-focusing effects. We find that self-compression occurs for a wide range of MPC and pulse parameters and derive scaling rules that enable its optimization. We also reveal the solitonic dynamics of the pulse propagation in the MPC and its limitations and show that spatiotemporal/spectral couplings can be mitigated for appropriately chosen parameters. In addition, we reveal the formation of spectral features akin to quasi-phase matched degenerate four-wave mixing. Finally, we present two case studies of self-compression at 3-μm and 6-μm wavelengths using pulse parameters compatible with driving high-field physics experiments. The simulations presented in this paper set a framework for future experimental work using few-cycle pulses at mid-IR wavelengths.

Carlson, D. (ORCID:0000000346836463)↗
DOE OSTI2021

Planck constraints on the tensor-to-scalar ratio

In this work, we present constraints on the tensor-to-scalar ratio r using Planck data. We use the latest release of Planck maps (PR4), processed with the NPIPE code, which produces calibrated frequency maps in temperature and polarization for all Planck channels from 30 GHz to 857 GHz using the same pipeline. We computed constraints on r using the BB angular power spectrum, and we also discuss constraints coming from the TT spectrum. Given Planck's noise level, the TT spectrum gives constraints on r that are cosmic-variance limited (with $\sigma$ r = 0.093), but we show that the marginalized posterior peaks towards negative values of r at about the 1.2$\sigma$ level. We derived Planck constraints using the BB power spectrum at both large angular scales (the 'reionization bump') and intermediate angular scales (the 'recombination bump') from $\ell$=2 to 150, and find a stronger constraint than that from TT, with $\sigma$ r = 0.069. The Planck BB spectrum shows no systematic bias, and is compatible with zero, given both the statistical noise and the systematic uncertainties. The likelihood analysis using B modes yields the constraint r < 0.158 at 95% confidence using more than 50% of the sky. This upper limit tightens to r < 0.069 when Planck EE, BB, and EB power spectra are combined consistently, and it tightens further to r < 0.056 when the Planck TT power spectrum is included in the combination. Finally, combining Planck with BICEP2/Keck 2015 data yields an upper limit of r < 0.044.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Role of hot electrons in shock ignition constrained by experiment at the National Ignition Facility

Shock ignition is a scheme for direct drive inertial confinement fusion that offers the potential for high gain with the current generation of laser facility; however, the benefits are thought to be dependent on the use of low adiabat implosions without laser–plasma instabilities reducing drive and generating hot electrons. A National Ignition Facility direct drive solid target experiment was used to calibrate a 3D Monte Carlo hot-electron model for 2D radiation-hydrodynamic simulations of a shock ignition implosion. The α = 2.5 adiabat implosion was calculated to suffer a 35% peak areal density decrease when the hot electron population with temperature T ℎ = 55 keV and energy E ℎ = 13 kJ was added to the simulation. Optimizing the pulse shape can recover ~1/3 of the peak areal density lost due to a change in shock timing. Here, despite the harmful impact of laser–plasma instabilities, the simulations indicate shock ignition as a viable method to improve performance and broaden the design space of near ignition high adiabat implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Lagrangian particle simulation of hydrogen pellets and SPI into runaway electron beam in ITER

Numerical studies of the ablation of pellets and shattered pellet injection (SPI) fragments into a runaway electron beam in ITER have been performed using a time-dependent pellet ablation code [Samulyak et al., Nucl. Fusion, 61(4), 046007 (2021)]. The code resolves detailed ablation physics near pellet fragments and large-scale expansion of ablated clouds. The study of a single-fragment ablation quantifies the influence of various factors, in particular, the impact ionization by runaway electrons and cross-field transport models, on the dynamics of ablated plasma and its penetration into the runaway beam. Simulations of SPI performed using different numbers of pellet fragments study the formation and evolution of the ablation clouds and their large-scale dynamics in ITER. In conclusion, the penetration depth of the ablation clouds is found to be of the order of 50 cm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Hall interchange instability as a seed for helical magneto-Rayleigh–Taylor instabilities in magnetized liner inertial fusion Z-Pinches scaled from Z-Machine parameters to a next generation pulsed power facility

Magnetized liner inertial fusion (MagLIF) is a magneto-inertial-fusion concept that is studied on the 20-MA, 100-ns rise time Z Pulsed Power Facility at Sandia National Laboratories. Given the relative success of the platform, there is a wide interest in studying the scaled performance of this concept at a next-generation pulsed-power facility that may produce peak currents upward of 60 MA. An important aspect that requires more research is the instability dynamics of the imploding MagLIF liner, specifically how instabilities are initially seeded. It has been shown in magnetized 1-MA thin-foil liner Z-pinch implosion simulations that a Hall interchange instability (HII) effect can provide an independent seeding mechanism for helical magneto-Rayleigh–Taylor instabilities. Here in this paper, we explore this instability at higher peak currents for MagLIF using 2D discontinuous Galerkin PERSEUS simulations, an extended magneto-hydrodynamics code, which includes Hall physics. Our simulations of scaled MagLIF loads show that the growth rate of the HII is invariant to the peak current, suggesting that studies at 20-MA are directly relevant to 60-MA class machines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Kinetic simulations comparing quasi-parallel and quasi-perpendicular piston-driven collisionless shock dynamics in magnetized laboratory plasmas

Magnetized collisionless shocks are common in astrophysical systems, and scaled versions can be created in laboratory experiments by utilizing laser-driven piston plasmas to create these shocks in a magnetized background plasma. A key parameter for these experiments is the angle θB between the shock propagation direction and the background magnetic field. We performed quasi-1D piston-driven shock simulations to explore shock formation, evolution, and key observables relevant to laboratory experiments for a range of shock angles between θB=90° to θB=30°. Our results show that the spatial and temporal scales of shock formation for all angles considered are similar when expressed in terms of the perpendicular component of the magnetic field. In a steady state, ion and electron temperatures become more isotropic, and the electron-to-ion temperature ratio is higher for smaller θB. At θB=30°, ion heating parallel to the magnetic field becomes dominant, associated with more ions being reflected at one discontinuity and subsequently trapped by the next discontinuity due to shock reformation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Sheath transitions in a cylindrical filament discharge: Axisymmetric 1D3V PIC-MCC simulations

We present the first nonplanar hot cathode discharge simulations that capture the role of the trapped-ions plasma, elucidating new phenomena unobservable in planar geometric discharges. A discharge struck between a single emitting wire filament cathode and a bounding anode is simulated in cylindrical geometry using an axisymmetric (radial) particle-in-cell Monte-Carlo collisions code. Operating the discharge near its ionization energy threshold can lead to the formation of a two plasma mode (TPM). One plasma forms in the conventional upstream region through electron impact ionization of background neutrals. A second plasma, whose global effect on the discharge was not previously well understood, forms downstream through the trapping of cold ions in the potential well of the filament’s virtual cathode, a process enabled by ion-neutral charge exchange collisions. Three space charge regions intersperse the electrode gap—an emissive sheath between the cathode filament and trapped-ions plasma, a double layer between the two plasmas, and a classical sheath between the upstream plasma and the outer anode. Simulations exhibit mode transitions and quenching instabilities that transform the discharge between the TPM and other single-plasma sheath modes that include classical (temperature-limited), space charge limited, and inverse (anode glow) modes. The transitions are explained via “aid-and-compete” dynamics wherein the growth of one plasma enhances growth in the other while concurrently exhibiting expansion dynamics antagonistic to each other. The system exhibits strong hysteresis memory during the mode transitions. Improved understanding and control of these sheath mode transitions are expected to benefit plasma applications with hot cathodes.

Electrical hysteresis↗
DOE OSTI2025

Spatially and temporally resolved plasma parameter estimations of laser heated MagLIF relevant gas pipes at NIF

The ability to control laser pre-heat is an integral part of the inertial confinement fusion concept known as Magnetized Liner Inertial Fusion. This process is studied at the National Ignition Facility (NIF) where 4 of the 192 laser beams are propagated through a 1-cm long gas cell where they deposit >20 kJ of energy into the gaseous fuel via inverse bremsstrahlung absorption. This process ionizes the gas, producing a plasma that follows behind the laser front and expands over the radius of the cell. Emission from this plasma, as viewed by a gated x-ray detector, can be used to build spatially and temporally resolved estimations of the pre-heat plasma's density and temperature profiles. This can then be used to estimate the plasma pressure, internal energy, and radiation losses. Estimations show the evolution of the plasma in magnetized and unmagnetized gas cells filled with ambient temperature neopentane (C5H12) +1% Ar, as well as unmagnetized cryogenically cooled (32 K) deuterium +1% Ne filled targets. This analysis shows the effects of initial gas-fill density, composition, and axial magnetization on the time-dependent plasma parameters. Previously, these parameters at the NIF had not been experimentally characterized, and these estimations provided a potential new means of testing radiation magneto-hydrodynamic predictive capability models. Results in unmagnetized targets have strong agreement with simulations. However, in targets with a 19 T applied axial magnetic field, this method yields electron temperatures up to 100% hotter than those predicted by HYDRA codes.

Bremsstrahlung↗
DOE OSTI2025

A theoretical model for sheath dynamics in the two-plasma mode of a cylindrical filament discharge

We present a refined understanding of cylindrical plasma-facing emitter cathodes by examining the limitations of the conventional space charge limited model, which overlooks ion trapping dynamics within the virtual cathode. While conventional theory distinguishes between temperature-limited and space charge limited regimes based on electron current constraints, our findings reveal that trapped ions can form a quasi-neutral “second plasma,” expanding upstream and interacting with the primary plasma. In cylindrical and other non-planar geometries, an expanding trapped-ions layer produces current enhancement by converting more of the emitted electron flux to passing flux. The current enhancement leads to a complex coupling between the trapped-ions plasma and upstream plasma through ionizing collisions in the upstream region and charge exchange collisions in the virtual cathode. The coupling results in mutual density enhancement and at the same time, antagonistic expansion dynamics between the two plasma layers. The process is understood using a new “aid-compete” model. Numerical solutions, validated against simulations, reveal the model's capacity to predict system evolution and complex discharge behaviors, albeit with qualitative approximations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Platform for 100 s Mbar equation of state measurements on the National Ignition Facility

Equation of state (EOS) measurements in the 100 s Mbar range are needed to underwrite models employed in the simulation of high energy density plasmas. To this end, a platform has been developed for fielding on the National Ignition Facility, capable of producing high-quality impedance match EOS data, wherein a planar, high-pressure, steady shock is driven into a sample package, and sample and reference standard shock velocities are measured. This platform, dubbed planar high pressure, or PHP, was fielded with an initial proof-of-concept shot in January 2023. The first PHP shot, aiming to study gold, demonstrated a pressure close to 400 Mbar, two orders of magnitude higher than previously reported gold EOS data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Theory for transport in magnetized plasmas

We present a two fluid model for anomalous thermal, particle and momentum transport which has been derived from kinetic theory using a small parameter ε~10-2. This small parameter can come from either the ratio of wave frequency to cyclotron frequency or the ratio of potential to thermal energies. This fluid model is strongly nonlinear and has an exact closure within the accuracy ε. It can be used to simulate the full radius of a tokamak including internal and edge transport barriers at the same time without introducing any local assumptions for physics model or grid size. It involves a full transport matrix, thus giving possibility for both density and heat pinches. The model can be derived from the Vlasov equation, adding also close collisions and includes particle pinches of the type found in the magnetosphere and in the Massachusetts Institute of Technology elevated dipole machine. Pinches are also in agreement for the heat pinch experiments on Doublet III D including simultaneous particle and heat pinches. For tokamaks it gives the right scaling of confinement time versus heating power. Finally, we have also recovered the Turbulent Equipartition result that the density scales as inverse safety factor q in typical simulations. Thus this model is both fundamental and of high practical use.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

QUBIC II: Spectral polarimetry with bolometric interferometry

Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foregrounds. In this paper, the methodology is illustrated with examples based on the Q & U Bolometric Interferometer for Cosmology (QUBIC) which is a ground-based instrument designed to measure the B-mode polarization of the sky at millimeter wavelengths. We consider the specific cases of point source reconstruction and Galactic dust mapping and we characterize the point spread function as a function of frequency. We study the noise properties of spectral imaging, especially the correlations between sub-bands, using end-to-end simulations together with a fast noise simulator. Finally, we conclude showing that spectral imaging performance are nearly optimal up to five sub-bands in the case of QUBIC.

79 ASTRONOMY AND ASTROPHYSICS↗