Search NASA⌕ Search

SEARCH · Search NASA

Results for “(S)TEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Perfluorobutyl iodides as gain media for a solar-pumped iodine laser amplifier

The effectiveness of t-C4F9I and n-C4F9I as gain media for a space-based solar-pumped iodine photodissociation laser is investigated experimentally. The optically coupled flashlamp/amplifier-tube apparatus described by Hwang et al. (1986) is employed, driving the amplifier with 4-microsec 4.2-mJ TEM(00) pulses from a flashlamp-pumped laser oscillator; the variation of amplification with energy-extraction time was monitored by inserting a delay of up to 1 msec between the firing of the two flashlamps and measuring the delay between the optical pulses. The results are presented graphically and briefly characterized. The performance of t-C4F9I is found to be better than that of n-C4F9I (or n-C3F7I), with an absorption band shifted toward the visible (for improved utilization of solar radiation), higher gain (by a factor of 2) at all delay times, and better chemical reversibility. The gain did not depend significantly on temperature in any of the iodides.

Tabibi, Bagher M.↗
NASA NTRS1987

The microstructure and tensile properties of extruded melt-spun ribbons of iron-rich B2 FeAl

The microstructure of extruded rods of iron-rich FeAl(B2-structure), as characterized by TEM, SEM, optical microscopy and x-ray diffractometry, consisted of elongated grains with a 111-line fibre texture containing a high dislocation density. Numerous oxide particles were found, mostly in lines which reflected the matrix flow during extrusion. In addition, some large inclusions were present. Tensile testing of annealed, relatively dislocation-free specimens as a function of increasing temperature found increasing ductility up to 900K, above which a ductility drop occurred accompanied by a change in fracture mode, from transgranular cleavage to intergranular fracture. The yield strength, which was independent of temperature up to 800K (at about 500MPa), also decreased rapidly as diffusion became more important. The predominant slip vector changed from 111-line to 100-line around 700K.

Baker, I.↗
NASA NTRS1988

Matrix mineralogy of the Orgueil CI carbonaceous chondrite

This paper presents the results of petrographic, SEM, and TEM studies of the matrix minerals in Orgueil. It was found that the matrix consists mainly of Fe-bearing Mg-rich serpentine and saponite, and a poorly crystallized Fe-rich ferrihydrite containing small and varying amounts of S and Ni. The serpentine and saponite, which occur in roughly equal molar proportions, are coherently intergrown and occur mainly in fine phyllosilicates in intimate association with the ferrihydrite. Coarse phylosilicates occur in clusters relatively free of ferrihydrite. The matrix mineralogy of the Orgueil chondrite suggests that Orgueil experienced considerably different alteration conditions than did the CM chondrites.

Tomeoka, Kazushige↗
NASA NTRS1988

Folded cavity design for a ruby resonator

A folded cavity laser resonator operating in the TEM(00) mode has been built and tested. The new oscillator configuration leads to an increase in efficiency and to better line narrowing due to the increased number of passes through the laser rod and tuning elements, respectively. The modification is shown to lead to cavity ruggedization.

Arunkumar, K. A.↗
NASA NTRS1988

Origin of petrofabrics and magnetic anisotropy in ordinary chondrites

Three-dimensional finite strain and magnetic susceptibility anisotropy have been determined for 15 ordinary chondrites. The axes of strain and magnetic ellipsoids roughly correlate in both magnitude and orientation. The shapes of these ellipsoids are generally oblate spheroids that define a dominant foliation and a weak lineation. These characteristics suggest deformation involving uniaxial compaction. The degree of uniaxial deformation correlates with intensity of shock, as indicated by optical, TEM and chemical criteria. These data, plus the lack of a relationship between foliation and metamorphic history, indicate that dynamic processes, i.e., impacts, produced planar deformation fabrics in chondrites.

Sneyd, Deana S.↗
NASA NTRS1988

Analytical electron microscopy of a hydrated interplanetary dust particle

Properties of a hydrated interplanetary dust particle (IDP), Ames-Dec86-11, were investigated using TEM and analytical electron microscopy. The particle was found to have mineralogy and chondritic composition indicating an absence of direct kinship with known carbonaceous chondrites. The available data on the Ames-Dec86-11 suggest that at least one aqueous alteration event took place in this hydrated IDP, during which fine-grained material, possibly glass, was transformed to smectite. This event appears to be unique to hydrated IDPs.

Blake, David F.↗
NASA NTRS1988

Interfaces in polymer, ceramic, and metal matrix composites; Proceedings of the Second International Conference on Composite Interfaces (ICCI-II), Cleveland, OH, June 13-17, 1988

The present conference on interfacial factors in advanced composite materials discusses such topics in their development status and properties as silane coupling, the electrochemical and plasma-surface treatment of carbon fibers, fiber surface-analytical techniques, polymer molecular scale characterization by atom-probe field-ion microscopy, the study of carbon fiber-epoxy resin interface interactions by means of labeling techniques, and the surface tailoring of SiC by ion implantation. Also discussed are developments in laser light-scattered photoelasticity, microstructural evolutions under heat treatment and radiation damage, TEM for composites, the interfaces of carbon fiber-reinforced Al composites, the influence of the interface on macroscopic composite properties, and the status of the theoretical understanding of composite interfaces.

Ishida, Hatsuo↗
NASA NTRS1988

Microstructures in rapidly solidified niobium aluminides

The microstructures of niobium aluminides produced by chill block melt spinning were compared to those of niobium aluminides produced by conventional casting. The rapidly solidified alloys were rapidly solidified by melt spinning in an argon atmosphere, and the melt-spun ribbons were examined by optical, X-ray, and TEM techniques. Microstructures were found to range from single-phase for Nb-75 at. pct Al (NbAl3) to two phase for Nb-46 at. pct Al (NbAl3 + Nb2Al). It was found that the melt spinning of Nb-aluminides produced finer grained microstructures than those produced in induction-melted ingots or in powders produced by the rotating electrode process. Ternary additions such as Cr, Ti, and Si tended to form intermetallic phases along the grain boundaries.

Hebsur, Mohan G.↗
NASA NTRS1988

Crystallization and characterization of Y2O3-SiO2 glasses

Glasses in the yttria-silica system with 20-40 mol pct Y2O3 have been subjected to recrystallization studies after melting at 1900-2100 C in W crucibles in 1 and 50 atm N2. The TEM and XRD results obtained indicate the presence of the delta, gamma, gamma-prime, and beta-Y2Si2O7 crystalline phases, depending on melting and quenching conditions. Heat-treatment in air at 1100-1600 C increased the amount of crystallization, and led to the formation of Y2SiO5, cristobalite, and polymorphs of Y2Si2O7. Also investigated were the effects of 5 and 10 wt pct zirconia additions.

Drummond, C. H., III↗
NASA NTRS1989

Influence of precipitate morphology on intermediate temperature creep properties of a nickel-base superalloy single crystal

The relative creep behavior of cuboidal (as-heat treated) and rafted (precrept at 1000 C) gamma-prime microstructures in the single-crystal Ni-based superalloy NASAIR 100 at 760 C was investigated using SEM and TEM examinations of materials at various stages of creep. It was found that, at high applied stresses, the crystals with cuboidal gamma-prime structure had both lower minimum creep rates and longer rupture lives than the crystals with lamellar gamma-prime. At lower stress levels, the initially cuboidal gamma-prime microstructure maintained a lower creep rate, but exhibited a similar rupture life compared to the prerafted crystals.

Nathal, M. V.↗
NASA NTRS1988

Elevated temperature slow plastic deformation of NiAl/TiB2 particulate composites

The 'XD' process for production of discontinuously-reinforced metal-matrix composites has been used to enhance the high-temperature strength of NiAl-TiB2 composites with particulate densities of up to 30 vol pct. SEM, TEM, and optical characterizations of the resulting microstructures showed the average TiB2 particle size to be about 1 micron, while the average grain of the NiAl matrix was of the order of 10 microns. Elevated temperature compression tests conducted at 1200 and 1300 K indicated flow strengths to increase with TiB2 content, so that the 20 vol pct TiB2-reinforced composite was three times stronger than the unreinforced NiAl; this is ascribed to the very high density of microstructural tangled dislocations, loops, and subgrain boundaries connecting the particles.

Whittenberger, J. Daniel↗
NASA NTRS1989

The influence of annealing in the ferrite-plus-austenite phase field on the stability of vanadium carbide precipitates

The effect of rapid excursions into the ferrite-plus-austenite two-phase field on V4C3 precipitates formed by tempering in the ferrite phases was investigated. Heat treatments were first performed to produce a starting microstructure of fine vanadium carbide particles precipitated in a ferrite matrix, and the microstructure was then subjected to various short-time heat treatment cycles that transformed part of the matrix to austenite. TEM was used to determine the effects of the matrix change on the size, morphology, and distribution of the vanadium carbide particles.

Locci, I. E.↗
NASA NTRS1989

Epitaxial growth of InSb (111) on sapphire (0001)

Indium antimonide has been epitaxially grown directly on sapphire. Reflection high-energy electron diffraction, TEM, and SEM data are presented to show that the indium antimonide layer is epitaxial, has an abrupt interface with the sapphire, and grows in the 111-line direction. Mobility data show room-temperature mobilities as high as 10,000 sq cm/V s from some regions on the wafer.

Jamison, K. D.↗
NASA NTRS1988

Shock metamorphism of deformed quartz

The effect produced by shock loading (to peak pressures of 12 and 24) on deformed synthetic quartz containing a dislocation and abundant bubbles and small inclusions was investigated, and the relationships between preexisting dislocation density shock lamellae in the target material were examined. The resultant material was found to be inhomogeneously deformed and extremely fractured. Results of TEM examinations indicate that no change in dislocation density was caused by shock loading except in regions containing shock lamellae, where the dislocation density was lowered. The shock-induced defects tend to nucleate on and be controlled by preexisting stress concentrators; shock lamellae, glassy veins, and most curviplanar defects form in tension, presumably during release. An extremely mobile silica fluid is formed and injected into fractures during release, which forcibly removes crystalline fragments from vein walls. It is concluded that shock deformation in quartz is dominated by fracture and melting.

Gratz, Andrew J.↗
NASA NTRS1988

Nucleation and growth of CrSi2 on Si(111)

The nucleation and growth of CrSi2 on Si(111) by MBE and solid-phase epitaxy (SPE), was investigated using SEM and TEM observations of 2-mm-thick layers grown under a variety of conditions, including the use of a CoSi2 buffer. During growth, the wafers were monitored in situ using reflection high-energy electron diffraction. Island growth was observed, with islands found to nucleate with three epitaxial orientations. The morphology of CrSi2 islands was found to be affected by the degree and direction of substrate misorientation, the growth technique, and the use of CoSi2 buffer. However, the reconstruction of the Si surface does not appear to be an important factor in controlling SPE growth.

Fathauer, R. W.↗
NASA NTRS1989

Ceramic problems/challenges in high temperature oxide superconductors - Hysteretic force measurements as a new analysis tool

A technique is presented for analyzing high-temperature oxide superconductors using hysteretic magnetic force/distance measurements. Emphasis is placed on developing low weight, highly robust superconducting materials for space applications. Bi-Ca-Sr-Cu superconductors are prepared and characterized by standard techniques. It is found that standard techniques such as XRD, SEM, and TEM are insufficient to completely characterize superconductors. The magnetic properties of the superconductors are studied with the new technique, based on measuring the force between a magnet and the superconductor as a function of their separation.

Morgan, P. E. D.↗
NASA NTRS1989

Comparative functional ultrastructure of two hypersaline submerged cyanobacterial mats - Guerrero Negro, Baja California Sur, Mexico, and Solar Lake, Sinai, Egypt

The ultrastructure of the submerged microbial mat from the Solar Lake (SL), Egypt, was compared to that of samples from the Guerrero Negro (GN), Mexico, salt pans. The locations and distributions of the main organisms were determined light microscopy, and the corresponding ultrathin sections were examined under TEM; chemical microprofile analyses were carried out on the day of sampling for microscopic studies. Both communities were found to be dominated by Microleus chthonoplastes, although several morphological species found in the GN mat were absent from the SL mat, including the Tropica nigra and the 'big' Microleus chthonoplastes component. The chemical microprofiles of oxygen, sulfide, pH, and the oxygenic photosynthesis in the two mats were virtually identical. In both mats, the photic zone was restricted to the upper 800 microns of the mat, and oxygenic photosynthesis was detected down to 600 microns.

D'Amelio, Elisa D'antoni↗
NASA NTRS1989

Mechanism for nearly ohmic behavior in annealed Au/n-GaAs Schottky diodes

The mechanism of the ohmic behavior commonly observed after annealing Au/n-GaAs 110-oriented Schottky diodes was investigated using electron-beam-induced current (EBIC) measurements, secondary electron imaging (SEI), and SEM and TEM observations. The results showed that the ohmic behavior of annealed Schottky diodes originates from a shunt current pathway at the diode periphery. The SEI, EBIC, and electrical measurements indicated that the ohmic leakage current is due to the surface recombinations at the exposed surface of GaAs between elongated Au crystallites.

Leon, R. P.↗