Search NASA⌕ Search

SEARCH · Search NASA

Results for “ADAPTIVE CONTROL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Adaptive Control for Uncertain Nonlinear Multi-Input Multi-Output Systems

Systems and methods of adaptive control for uncertain nonlinear multi-input multi-output systems in the presence of significant unmatched uncertainty with assured performance are provided. The need for gain-scheduling is eliminated through the use of bandwidth-limited (low-pass) filtering in the control channel, which appropriately attenuates the high frequencies typically appearing in fast adaptation situations and preserves the robustness margins in the presence of fast adaptation.

Cao, Chengyu↗
NASA NTRS1975

ATS-6 - Spacecraft Attitude Precision Pointing and Slewing Adaptive Control Experiment

The primary objective of the Spacecraft Attitude Precision Pointing and Slewing Adaptive Control (SAPPSAC) experiment is to establish feasibility and evaluate capabilities of a ground-based spacecraft attitude control system, wherein RF command and telemetry links, together with a ground station on-line minicomputer, perform closed loop attitude control of the Applications Technology Satellite-6 (ATS-6). The ground processor is described, including operational characteristics and the controller software. Attitude maneuvers include precision pointing to fixed targets, slewing between targets, and generation of prescribed ground tracks. Test results show high performance and reliability for over 30 hours of on-line control with no serious anomalies. Attitude stabilization relative to a prescribed target has been achieved to better than 0.007 deg in pitch and roll and 0.02 deg in yaw for a period of 43 min. Ground tracks were generated which had maximum latitude/longitude deviations less than 0.15 deg from reference.

Isley, W. C.↗
NASA NTRS1975

Discrete model reference adaptive control with an augmented error signal

A method for designing discrete model reference adaptive control systems when one has access to only the plant's input and output signals is given. Controllers for single-input, single-output, nonlinear, nonautonomous plants are developed via Liapunov's second method. Anticipative values of the plant output are not required, but are replaced by signals easily obtained from a low-pass filter operating on the plant's output. The augmented error signal method is employed, ensuring finally that the normally used error signal also approaches zero asymptotically.

Ionescu, T.↗
NASA NTRS1988

Adaptive Control For Flexible Structures

Paper discusses ways to cope with measurement noise in adaptive control system for large, flexible structure in outer space. System generates control signals for torque and thrust actuators to turn all or parts of structure to desired orientations while suppressing torsional and other vibrations. Main result of paper is general theory for introduction of filters to suppress measurement noise while preserving stability.

Bayard, David S.↗
NASA NTRS1989

Joint-space adaptive control of a redundant telerobot manipulator

The design of a joint-space adaptive control scheme for controlling the slave arm motion of a dual-arm telerobot system is presented. Each slave arm of the dual-arm system is a kinematically redundant manipulator with 7 DOF. The implementation of the derived control scheme does not require the computation of manipulator dynamics, which makes the control scheme sufficiently fast for real-time applications.

Nguyen, Charles C.↗
NASA NTRS1992

Comparison and extension of a direct model reference adaptive control procedure

This paper analyzes and extends an easily implemented direct model reference adaptive control procedure. The paper focuses on the major limitation of this control approach which is the satisfaction of a strictly positive real sufficiency condition in order to guarantee asymptotic tracking. Attempts, to date, to address this problem have been unable to relax simultaneously the stringent condition and maintain asymptotic tracking capabilities. Three different modifications to existing versions of this algorithm are presented which substantially relax the stringent sufficiency condition while providing asymptotic tracking. These three modifications achieve this goal by imposing slight adjustments to existing sufficiency conditions. A simulation example demonstrates that the modifications eliminate the steady error inherent in the existing methods.

Neat, Gregory W.↗
NASA NTRS1993

The cost of model reference adaptive control - Analysis, experiments, and optimization

In this paper the performance of Model Reference Adaptive Control (MRAC) is studied in numerical simulations and verified experimentally with the objective of understanding how differences between the plant and the reference model affect the control effort. MRAC is applied analytically and experimentally to a single degree of freedom system and analytically to a MIMO system with controlled differences between the model and the plant. It is shown that the control effort is sensitive to differences between the plant and the reference model. The effects of increased damping in the reference model are considered, and it is shown that requiring the controller to provide increased damping actually decreases the required control effort when differences between the plant and reference model exist. This result is useful because one of the first attempts to counteract the increased control effort due to differences between the plant and reference model might be to require less damping, however, this would actually increase the control effort. Optimization of weighting matrices is shown to help reduce the increase in required control effort. However, it was found that eventually the optimization resulted in a design that required an extremely high sampling rate for successful realization.

Messer, R. S.↗
NASA NTRS1969

On adaptive manual control.

Adaptive manual control rapid variation determined by input, controlled element, task and programmed adaptation systems, discussing human strategy changes

Young, L. R.↗
NASA NTRS1996

Adaptive Control Strategies for Flexible Robotic Arm

The control problem of a flexible robotic arm has been investigated. The control strategies that have been developed have a wide application in approaching the general control problem of flexible space structures. The following control strategies have been developed and evaluated: neural self-tuning control algorithm, neural-network-based fuzzy logic control algorithm, and adaptive pole assignment algorithm. All of the above algorithms have been tested through computer simulation. In addition, the hardware implementation of a computer control system that controls the tip position of a flexible arm clamped on a rigid hub mounted directly on the vertical shaft of a dc motor, has been developed. An adaptive pole assignment algorithm has been applied to suppress vibrations of the described physical model of flexible robotic arm and has been successfully tested using this testbed.

Bialasiewicz, Jan T.↗
NASA NTRS2012

Adaptive Control with Reference Model Modification

This paper presents a modification of the conventional model reference adaptive control (MRAC) architecture in order to improve transient performance of the input and output signals of uncertain systems. A simple modification of the reference model is proposed by feeding back the tracking error signal. It is shown that the proposed approach guarantees tracking of the given reference command and the reference control signal (one that would be designed if the system were known) not only asymptotically but also in transient. Moreover, it prevents generation of high frequency oscillations, which are unavoidable in conventional MRAC systems for large adaptation rates. The provided design guideline makes it possible to track a reference commands of any magnitude from any initial position without re-tuning. The benefits of the method are demonstrated with a simulation example

Stepanyan, Vahram↗
NASA NTRS1974

Model reference adaptive control with an augmented error signal

It is shown how globally stable model reference adaptive control systems may be designed when one has access to only the plant's input and output signals. Controllers for single input-single output, nonlinear, nonautonomous plants are developed based on Lyapunov's direct method and the Meyer-Kalman-Yacubovich lemma. Derivatives of the plant output are not required, but are replaced by filtered derivative signals. An augmented error signal replaces the error normally used, which is defined as the difference between the model and plant outputs. However, global stability is assured in the sense that the normally used error signal approaches zero asymptotically.

Monopoli, R. V.↗
NASA NTRS1986

Necessary and sufficient conditions for parameter convergence in adaptive control

Using Generalized Harmonic Analysis, a complete description of parameter convergence in Model Reference Adaptive Control (MRAC) is given in terms of the spectrum of the exogenous reference input signal. Roughly speaking, if the reference signal 'contains enough frequencies' then the parameter vector converges to its correct value. If not, it converges to an easily characterizable subspace in parameter space.

Boyd, Stephen↗
NASA NTRS1988

Averaging analysis of adaptive control algorithms

The method of averaging is used to analyze discrete-time indirect adaptive control. The analysis focuses on various prediction-error-driven identification algorithms coupled with a general linear control law. The plant is not required to be in the model set of the identifier, which accounts for systems with unmodeled plant dynamics. Exogenous input signals including known command signals and unknown disturbances are also included. Both gradient and Newton-based algorithms are considered.

Phillips, Stephen M.↗
NASA NTRS2006

Flight Test of an Adaptive Controller and Simulated Failure/Damage on the NASA NF-15B

The method of flight-testing the Intelligent Flight Control System (IFCS) Second Generation (Gen-2) project on the NASA NF-15B is herein described. The Gen-2 project objective includes flight-testing a dynamic inversion controller augmented by a direct adaptive neural network to demonstrate performance improvements in the presence of simulated failure/damage. The Gen-2 objectives as implemented on the NASA NF-15B created challenges for software design, structural loading limitations, and flight test operations. Simulated failure/damage is introduced by modifying control surface commands, therefore requiring structural loads measurements. Flight-testing began with the validation of a structural loads model. Flight-testing of the Gen-2 controller continued, using test maneuvers designed in a sequenced approach. Success would clear the new controller with respect to dynamic response, simulated failure/damage, and with adaptation on and off. A handling qualities evaluation was conducted on the capability of the Gen-2 controller to restore aircraft response in the presence of a simulated failure/damage. Control room monitoring of loads sensors, flight dynamics, and controller adaptation, in addition to postflight data comparison to the simulation, ensured a safe methodology of buildup testing. Flight-testing continued without major incident to accomplish the project objectives, successfully uncovering strengths and weaknesses of the Gen-2 control approach in flight.

Buschbacher, Mark↗
NASA NTRS2020

Dynamic Stability And Adaptive Control of Networked Evolving Formations with Weak Nonlinearities

The dynamic stability of formation geometry is vital to the design of large scale multiagent systems. In this paper, we probe into the structure of the formation system matrix using the Laplacian of a digraph to develop several fundamental theoretical results on the stability of formation geometry. Our key-results include the integration of the graph Laplacian into linear and weak-nonlinear relative dynamics, the development of several new coordinate transformations that expose the influence of the graph Laplacian matrix on the control laws of the agents, and the use of direct adaptive control as stability restoring devices. We also develop two fundamental results that provide upper bounds for stable formation evolution under nonlinear perturbations of agent dynamics. Finally, we use an illustrative example to demonstrate our theoretical findings.

Gehlot, Vinod P.↗
NASA NTRS1973

Model reference adaptive control using only input and output signals

It is shown how globally stable model reference adaptive control systems may be designed using only the plant's input and output signals. Controllers for single input-single output, nonlinear, nonautonomous plants are developed based on Liapunov's direct method and the Meyer-Kalman-Yacubovich lemma. Filtered derivatives of the plant output replace pure derivatives which are normally required in these systems. An augmented error signal replaces the error previously used which is the difference between the model and plant outputs. However, global stability is assured in the sense that this difference approaches zero asymptotically.

Monopoli, R. V.↗