Search NASA⌕ Search

SEARCH · Search NASA

Results for “APPROPRIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

In-situ Investigations on Gold Nanoparticles Stabilization Mechanisms in Biological Environments Containing HSA

Nanoparticles (NPs) developments advance innovative biomedical applications. However, complex interactions and the low colloidal stability of NPs in biological media restrict their widespread utilization. The influence of NPs properties on the colloidal stability for gold NPs with 5 and 40 nm in diameter with two surface modifications, methoxy-polyethylene glycol-sulfhydryl (PEG) and citrate, in NaCl and human serum albumin (HSA) protein solution, is investigated. This study is based on small-angle X-ray scattering (SAXS) methods allowing the in-situ monitoring of interactions in physiological conditions. The PEG coating provides high colloidal stability for NPs of both sizes. For 5 nm NPs in NaCl solution, a stable 3D self-assembled body-centered cubic (BCC) arrangement is detected with an interparticle distance of 20.7 ± 0.1 nm. In protein solution, this distance increases to 21.9 ± 0.1 nm by protein penetration inside the ordered structure. For citrate-capped NPs, a different mechanism is observed. The protein particles attach to the NPs surfaces, and an appropriate concentration of proteins results in a stable suspension. Cryogenic transmission electron microscopy (Cryo-TEM), UV–visible spectroscopy, and dynamic light scattering (DLS) support the SAXS results. The findings will pave the way to design and synthesize NPs with controlled behaviors in biomedical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of the Selective Halogenation of Small Molecule Acceptors on the Blend Morphology and Voltage Loss of High-Performance Solar Cells

Herein, the impacts of the selective halogenation at two different positions of dicyanomethylene-3-indanone (IC) end groups and inner side chains of small molecular acceptors (SMAs) on the P D :SMA interfacial interactions, blend morphology, and resulting photovoltaic properties are described. In this study, four different SMAs (A1, A2, A3, and A4) with the same molecular backbone, but with different degrees of halogenation, are synthesized. The IC end groups on the backbones of the A1 and A3, and A2 and A4 SMAs are chlorinated and fluorinated, respectively; in addition, 6-phenoxyhexyl inner side chains of the A3 and A4 are chlorinated. The SMAs are paired with a chlorinated PBDT-Cl PD to construct organic solar cells (OSCs). The PBDT-Cl:A4-based OSC exhibits the highest power conversion efficiency of 17.2%, outperforming the PBDT-Cl:A1-(13.3%), PBDT-Cl:A2-(15.6%), and PBDT-Cl:A3-based OSC (16.5%). The Cl atoms on the side chains in the A3 and A4 SMAs enhance the molecular/energetic interactions at the P D :SMA interfaces and improve the blend morphology in terms of domain purity and spacing. These effects lead to the improved fill factors and reduced voltage loss of the PBDT-Cl:A3- and PBDT-Cl:A4-based OSCs. This study demonstrates the importance of appropriate halogenation of SMAs in optimizing the blend morphology, reducing voltage loss, and improving OSC performance.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Smartly Optimizing Crystallinity, Compatibility, and Morphology for Polymer Solar Cells by Small Molecule Acceptor with Unique 2D-EDOT Side Chain

A desired morphology is essential for achieving efficient polymer solar cells. Donors and acceptors with appropriate crystallization can lead to a suitable phase-separated morphology for effective photocurrent generation process. Inspired by the success of Y6 acceptors and the 2D side chain engineering on popular polymer donors and small molecule acceptors, the usage of unique 2D 3,4-ethylene dioxythiophene (EDOT) side chains on Y6 to regulate its crystallinity, compatibility, and thus the related blend morphology is explored. Here, in this study, two molecules of BTP-EDOT-4F and BTP-EDOT-4Cl with such unique 2D EDOT side chains are designed and synthesized. Due to the advantage of EDOT side chain, when these molecules are blended with PM6, the decent power conversion efficiencies (PCEs) of 16.78% and 15.87% are obtained. Furthermore, BTP-EDOT-4F is selected as the third component and added into PM6:L8-BO binary system to form ternary blends. The optimized crystallinity, compatibility, and morphology of such ternary blend are discovered in the presence of BTP-EDOT-4F, which enables efficient exciton dissociation and charge transport as well as decreased recombination, resulting in higher short circuit current density (J sc ) and fill factor. Finally, the outstanding PCE of 18.56% is achieved in ternary blends containing PM6, L8-BO, and BTP-EDOT-4F.

2D EDOT side chains↗
DOE OSTI2023

Developing Efficient Benzene Additives for 19.43% Efficiency of Organic Solar Cells by Crossbreeding Effect of Fluorination and Bromination

Employing volatile solid additives have emerged as a promising method to optimize the morphology and improve the performance of organic solar cells (OSCs). However, principles governing the efficient design of solid additives remain elusive. In this work, the programmed fluorination and/or bromination on benzene core to develop efficient additives for OSCs is reported. The programmed fluorination and/or bromination endow the five halogen benzene derivatives, 1,3,5-trifluorobenzene, hexafluorobenzene, 1,3,5-tribromo-2,4,6-trifluorobenzene (TFTB), 1,3,5-tribromobenzene, and hexabromobenzene, with different melting and boiling points, volatility, as well as interactions with the host blend. Studies indicate that the additives with extremely high and low volatility are almost powerless and even detrimental to the morphology evolution. Among them, the combination of fluorine and bromine atoms on TFTB not only enables the more appropriate m.p./b.p. and volatility, but also exerts stronger molecular interactions with the host blend, giving rise to higher ordered molecular packing and more favorable morphology. Importantly, TFTB exhibits good universality to optimize the performances of OSCs with high power conversion efficiencies (PCEs; over 18%) in a group of binary blend systems, and an impressive PCE of 19.43% in the ternary PBTz-F:PM6:L8-BO system.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Impact of Linker Engineering in Core‐Linked Dimeric Acceptors for High‐Performance Organic Solar Cells

Abstract The dimerization of small molecule acceptors (SMAs) is a promising strategy for enhancing the long‐term stability and power conversion efficiency (PCE) of organic solar cells (OSCs). However, the reported DSMAs are primarily limited to end‐linked molecular configurations, highlighting the need for further exploration of various dimer architectures. Herein, the development of two distinct core‐linked dimerized SMAs (DYF‐V and DYF‐E) are reported with tailored linker structures (vinylene and ethynyl, respectively), achieving high‐performance OSCs (PCE = 18.53%). Interestingly, a subtle change in the linker structures results in markedly different molecular properties and photovoltaic performances of the dimer acceptors. DYF‐E with an ethynyl linker exhibits more twisted backbone conformation and mitigated aggregation property compared to DYF‐V, inducing desirable blend morphologies with a polymer donor including high crystallinity, face‐on oriented packing structures, and well‐intermixed domains. Thus, the DYF‐E‐based OSCs exhibit a high PCE (17.02%), which significantly outperforms the DYF‐V‐based OSCs (PCE = 9.98%). Furthermore, the ternary OSCs based on DYF‐E achieve a higher PCE of 18.53%. Thus, this study highlights the significance of selecting an appropriate linker in core‐linked dimerized SMAs for producing high‐performance OSCs.

Oh, Shinbee↗
DOE OSTI2026

Cation-Diffusive Carbon Interlayers Stabilize Na Metal and Double the Current in Na-S Redox-Flow Batteries for Grid-Scale Energy Storage

The sodium-sulfur nonaqueous redox-flow batteries (Na-S NARFBs) using earth-abundant elements are highly attractive due to the low material cost and improved energy density for grid-scale energy storage. However, the low current performance, poor Na0/Na+ redox kinetics, and Na dendrite growth pose severe challenges. We introduce cation-diffusive layers (CDLs): thin and Na+ affinitive interlayers at the Na anode that direct Na+ transport and stabilize Na deposition. Benchmarking three archetypal materials—carbon paper (CP), glass microfiber paper (GF), and foam—across Na-Na and Na-Cu, and Na-S cells identifies CP as the optimum. CP reduces symmetric cell overpotential by more than 70%, achieves 98% Na plating-stripping efficiency, and doubles the Na-S cell current density from 0.5 to 1.0 mA cm−2 without sacrificing capacity or efficiency. Ex situ electrochemical and SEM/XPS analysis, combined with molecular dynamics (MD) studies, reveal that electron-rich carbon fibers disperse supporting salt aggregates, enrich near-surface Na+ density, and create ion transport pathways for fast Na0/Na+ exchange while mitigating membrane degradation. Because of the ion-centric mechanism, CDLs can be generalized to other metal-anode designs. Further, this work establishes CDL design rules—cationic affinity and appropriate micro/nanostructure—as a simple, scalable route to high-current, durable metal-anode flow batteries.

Wu, Wenda [ORNL] (ORCID:000900033307687X)↗
DOE OSTI2020

Antiferromagnetic Inverse Spinel Oxide LiCoVO 4 with Spin-Polarized Channels for Water Oxidation

Exploring highly efficient catalysts for the oxygen evolution reaction (OER) is essential for water electrolysis. Cost-effective transition-metal oxides with reasonable activity are raising attention. Recently, OER reactants' and products' differing spin configurations have been thought to cause slow reaction kinetics. Catalysts with magnetically polarized channels could selectively remove electrons with opposite magnetic moment and conserve overall spin during OER, enhancing triplet state oxygen molecule evolution. Herein, antiferromagnetic inverse spinel oxide LiCoVO 4 is found to contain d 7 Co 2+ ions that can be stabilized under active octahedral sites, possessing high spin states S = 3/2 (t 2g 5 e g 2 ). With high spin configuration, each Co 2+ ion has an ideal magnetic moment of 3 µ B , allowing the edge-shared Co 2+ octahedra in spinel to be magnetically polarized. Density functional theory simulation results show that the layered antiferromagnetic LiCoVO 4 studied contains magnetically polarized channels. The average magnetic moment (µ ave ) per transition-metal atom in the spin conduction channel is around 2.66 µ B . Such channels are able to enhance the selective removal of spin-oriented electrons from the reactants during the OER, which facilitates the accumulation of appropriate magnetic moments for triplet oxygen molecule evolution. Finally, the LiCoVO 4 reported has been identified as an oxide catalyst with excellent OER activity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Superconducting Quantum Metamaterials from Convergence of Soft and Hard Condensed Matter Science

Superconducting quantum metamaterials are expected to exhibit a variety of novel properties, but have been a major challenge to prepare as a result of the lack of appropriate synthetic routes to high-quality materials. Here, the discovery of synthesis routes to block copolymer (BCP) self-assembly-directed niobium nitrides and carbonitrides is described. The resulting materials exhibit unusual structure retention even at temperatures as high as 1000 °C and resulting critical temperature, T c , values comparable to their bulk analogues. Applying the concepts of soft matter self-assembly, it is demonstrated that a series of four different BCP-directed mesostructured superconductors are accessible from a single triblock terpolymer. Resulting materials display a mesostructure-dependent T c without substantial variation of the XRDmeasured lattice parameters. Lastly, field-dependent magnetization measurements of a sample with double-gyroid morphology show abrupt jumps comparable in overall behavior to flux avalanches. Results suggest a fruitful convergence of soft and hard condensed matter science.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Direct Chemical Vapor Deposition Synthesis of Porous Single-Layer Graphene Membranes with High Gas Permeances and Selectivities

Single-layer graphene containing molecular-sized in-plane pores is regarded as a promising membrane material for high-performance gas separations due to its atomic thickness and low gas transport resistance. However, typical etching-based pore generation methods cannot decouple pore nucleation and pore growth, resulting in a trade-off between high areal pore density and high selectivity. In contrast, intrinsic pores in graphene formed during chemical vapor deposition are not created by etching. Therefore, intrinsically porous graphene can exhibit high pore density while maintaining its gas selectivity. Here in this work, the density of intrinsic graphene pores is systematically controlled for the first time, while appropriate pore sizes for gas sieving are precisely maintained. As a result, single-layer graphene membranes with the highest H 2 /CH 4 separation performances recorded to date (H 2 permeance > 4000 GPU and H 2 /CH 4 selectivity > 2000) are fabricated by manipulating growth temperature, precursor concentration, and non-covalent decoration of the graphene surface. Moreover, it is identified that nanoscale molecular fouling of the graphene surface during gas separation where graphene pores are partially blocked by hydrocarbon contaminants under experimental conditions, controls both selectivity and temperature dependent permeance. Overall, the direct synthesis of porous single-layer graphene exploits its tremendous potential as high-performance gas-sieving membranes.

chemical vapor deposition↗
DOE OSTI2021

Textured Electrodes: Manipulating Built-In Crystallographic Heterogeneity of Metal Electrodes via Severe Plastic Deformation

Control of crystallography of metal electrodeposit films has recently emerged as a key to achieving long operating lifetimes in next-generation batteries. It is reported that the large crystallographic heterogeneity, e.g., broad orientational distribution, that appears characteristic of commercial metal foils, results in rough morphology upon plating/stripping. On this basis, an accumulative roll bonding (ARB) methodology—a severe plastic deformation process—is developed. Zn metal is used as a first example to interrogate the concept. It is demonstrated that the ARB process is highly effective in achieving uniform crystallographic control on macroscopic materials. After the ARB process, the Zn grains exhibit a strong (002) texture (i.e., [002] Zn //ND). The texture transitions from a classical bipolar pattern to a nonclassical unipolar pattern under large nominal strain eliminate the orientational heterogeneity of the foil. The strongly (002)-textured Zn remarkably improves the plating/stripping performance by nearly two orders of magnitude under practical conditions. The performance improvements are readily scaled to achieve pouch-type full batteries that deliver exceptional reversibility. The ARB process can, in principle, be applied to any metal chemistry to achieve similar crystallographic uniformity, provided the appropriate temperature and accumulated strains are employed. Here this concept is evaluated using commercial Li and Na foils, which, unlike Zn (HCP), are BCC crystals. The simple process for creating strong textures in both hexagonal and cubic metals and illustrating the critical role such built-in crystallography plays underscores opportunities for developing highly reversible thin metal anodes (e.g., hexagonal Zn, Mg, and cubic Li, Na, Ca, Al).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Machine Learning on a Robotic Platform for the Design of Polymer–Protein Hybrids

Polymer–protein hybrids are intriguing materials that can bolster protein stability in non-native environments, thereby enhancing their utility in diverse medicinal, commercial, and industrial applications. One stabilization strategy involves designing synthetic random copolymers with compositions attuned to the protein surface, but rational design is complicated by the vast chemical and composition space. Here, a strategy is reported to design protein-stabilizing copolymers based on active machine learning, facilitated by automated material synthesis and characterization platforms. The versatility and robustness of the approach is demonstrated by the successful identification of copolymers that preserve, or even enhance, the activity of three chemically distinct enzymes following exposure to thermal denaturing conditions. Although systematic screening results in mixed success, active learning appropriately identifies unique and effective copolymer chemistries for the stabilization of each enzyme. Overall, this work broadens the capabilities to design fit-for-purpose synthetic copolymers that promote or otherwise manipulate protein activity, with extensions toward the design of robust polymer–protein hybrid materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

ECRAM Materials, Devices, Circuits and Architectures: A Perspective

Abstract Non‐von‐Neumann computing using neuromorphic systems based on two‐terminal resistive nonvolatile memory elements has emerged as a promising approach, but its full potential has not been realized due to the lack of materials and devices with the appropriate attributes. Unlike memristors, which require large write currents to drive phase transformations or filament growth, electrochemical random access memory (ECRAM) decouples the “write” and “read” operations using a “gate” electrode to tune the conductance state through charge‐transfer reactions, and every electron transferred through the external circuit in ECRAM corresponds to the migration of ≈1 ion used to store analogue information. Like static dopants in traditional semiconductors, electrochemically inserted ions modulate the conductivity by locally perturbing a host's electronic structure; however, ECRAM does so in a dynamic and reversible manner. The resulting change in conductance can span orders of magnitude, from gradual increments needed for analog elements, to large, abrupt changes for dynamically reconfigurable adaptive architectures. In this in‐depth perspective, the history of ECRAM, the recent progress in devices spanning organic, inorganic, and 2D materials, circuits, architectures, the rich portfolio of challenging, fundamental questions, and how ECRAM can be harnessed to realize a new paradigm for low‐power neuromorphic computing are discussed.

Talin, A. Alec↗
DOE OSTI2023

Sequential Deposition of Multicomponent Bulk Heterojunctions Increases Efficiency of Organic Solar Cells

Constructing tandem and multi-blend organic solar cells (OSCs) is an effective way to overcome the absorption limitations of conventional single-junction devices. However, these methods inevitably require tedious multilayer deposition or complicated morphology-optimization procedures. Herein, sequential deposition is utilized as an effective and simple method to fabricate multicomponent OSCs with a double-bulk heterojunction (BHJ) structure of the active layer to further improve photovoltaic performance. Two efficient donor-acceptor pairs, D18-Cl:BTP-eC9 and PM6:L8-BO, are sequentially deposited to form the D18-Cl:BTP-eC9/PM6:L8-BO double-BHJ active layer. In these double-BHJ OSCs, light absorption is significantly improved, and optimal morphology is also retained without requiring a more complicated morphology optimization involved in quaternary blends. Compared to the quaternary blend devices, energy loss (E loss ) is also reduced by rationally matching each donor with an appropriate acceptor. Consequently, the power conversion efficiency (PCE) is improved from 18.25% for D18-Cl:BTP-eC9 and 18.69% for PM6:L8-BO based binary blend OSCs to 19.61% for the double-BHJ OSCs. In contrast, a D18-Cl:PM6:L8-BO:BTP-eC9 quaternary blend of OSCs exhibited a dramatically reduced PCE of 15.83%. Finally, these results demonstrate that a double-BHJ strategy, with a relatively simple processing procedure, can potentially enhance the device performance of OSCs and lead to more widespread use.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electrolytes with Solvating Inner Sheath Engineering for Practical Na–S Batteries

Sodium–sulfur (Na–S) batteries with durable Na-metal stability, shuttle-free cyclability, and long lifespan are promising to large-scale energy storages. However, meeting these stringent requirements poses huge challenges with the existing electrolytes. Herein, a localized saturated electrolyte (LSE) is proposed with 2-methyltetrahydrofuran (MeTHF) as an inner sheath solvent, which represents a new category of electrolyte for Na–S system. Unlike the traditional high concentration electrolytes, the LSE is realized with a low salt-to-solvent ratio and low diluent-to-solvent ratio, which pushes the limit of localized high concentration electrolyte (LHCE). The appropriate molecular structure and solvation ability of MeTHF regulate a saturated inner sheath, which features a reinforced coordination of Na + to anions, enlarged Na + -solvent distance, and weakened anion-diluent interaction. Such electrolyte configuration is found to be the key to build a sustainable interphase and a quasi-solid–solid sulfur redox process, making a dendrite-inhibited and shuttle-free Na–S battery possible. With this electrolyte, pouch cells with decent cycling performance under rather demanding conditions are demonstrated.

25 ENERGY STORAGE↗
DOE OSTI2023

Synthesis of 2H/ fcc -Heterophase AuCu Nanostructures for Highly Efficient Electrochemical CO 2 Reduction at Industrial Current Densities

Structural engineering of nanomaterials offers a promising way for developing high-performance catalysts toward catalysis. However, the delicate modulation of thermodynamically unfavorable nanostructures with unconventional phases still remains a challenge. Here, in this study, the synthesis of hierarchical AuCu nanostructures is reported with hexagonal close-packed (2H-type)/face-centered cubic (fcc) heterophase, high-index facets, planar defects (e.g., stacking faults, twin boundaries, and grain boundaries), and tunable Cu content. The obtained 2H/fcc Au 99 Cu 1 hierarchical nanosheets exhibit excellent performance for the electrocatalytic CO 2 reduction to produce CO, outperforming the 2H/fcc Au 91 Cu 9 and fcc Au 99 Cu 1 . The experimental results, especially those obtained by in-situ differential electrochemical mass spectroscopy and attenuated total reflection Fourier-transform infrared spectroscopy, suggest that the enhanced catalytic performance of 2H/fcc Au 99 Cu 1 arises from the unconventional 2H/fcc heterophase, high-index facets, planar defects, and appropriate alloying of Cu. Impressively, the 2H/fcc Au 99 Cu 1 shows CO Faradaic efficiencies of 96.6% and 92.6% at industrial current densities of 300 and 500 mA cm -2 , respectively, as well as good durability, placing it among the best CO 2 reduction electrocatalysts for CO production. The atomically structural regulation based on phase engineering of nanomaterials (PEN) provides an avenue for the rational design and preparation of high-performance electrocatalysts for various catalytic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Atomic‐Scale Mechanisms of Nucleation and Stabilization in CuCrO 2 and CuFeO 2 Delafossite Thin Films on Al 2 O 3

Abstract Delafossite thin films exhibit a range of intriguing physical properties derived from their layered structure, which consists of alternating noble metal ( A + ) and ( B O 2 − ) sublayers in an AB O 2 stoichiometry. The integration of these properties into functional devices requires the successful epitaxial growth of delafossites as thin films on appropriate substrates. Unfortunately, their unique lattice geometry complicates growth, as different delafossites display variable behavior on the same substrate, often unrelated to lattice mismatch. This suggests the presence of yet unidentified stabilization mechanisms that enable the selective growth of certain delafossites, allowing them to be grown either as films themselves or to be used as buffer layers for subsequent deposition. In this study, advanced scanning transmission electron microscopy (STEM) is employed to investigate the nucleation mechanisms governing the stable growth of Cu‐based delafossites on Al 2 O 3 , specifically CuCrO 2 and CuFeO 2 thin films synthesized via molecular‐beam epitaxy. These findings reveal that a combination of a misfit dislocation network at the interface and monolayer‐deep chemical intermixing effectively relieves lattice mismatch strain. This mechanism, which differs fundamentally from that observed in Pd‐based delafossites, provides key insights into the controlled epitaxy of delafossite materials.

Scheid, Anna [Max Planck Institute for Solid State↗
DOE OSTI2022

Flexible Copper Metal Circuits via Desktop Laser Printed Masks

A novel process is demonstrated that produces patterns of electrically conductive copper on a flexible polyimide film substrate using standard desktop laser printed toner and near room temperature aqueous chemistry. The laser toner acts as a mask to selectively block the ion exchange self-metallization (IESM) reduction reaction that forms nanoscale silver or palladium coatings at the polyimide surface. The silver or palladium IESM coating is then used as a catalyst for electroless deposition of copper. Under appropriate conditions, the copper is deposited selectively on top of the catalyst layer. The resulting copper layer has a measured sheet resistance as low as 0.3 Ohms/sq. Electrical isolation was measured between copper traces spaced as close as 300 microns, and high conductivity was measured along traces with widths as low as 200 microns. The minimum pattern size appears to be limited primarily by the resolution of the laser toner pattern, as the IESM metal layer was observed to follow the contours of individual toner particles. Here, the process avoids the use of high temperature, vacuum, and organic solvents and is thus suitable for very low cost prototyping or distributed manufacturing of simple electronic devices.

36 MATERIALS SCIENCE↗