Search NASA⌕ Search

SEARCH · Search NASA

Results for “ATOMIC MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Detailed investigations on radiative opacity and emissivity of tin plasmas in the extreme-ultraviolet region

Radiative opacity and emissivity of tin plasmas at average ionization degree of about 10 was investigated in detail by using a fully relativistic detailed level accounting approach, in which main physical effects on the opacity were carefully taken into account. Among these physical effects, configuration interaction, in particular core-valence electron correlations, plays an important role on the determination of accurate atomic data required in the calculation of opacity. It results in a strong narrowing of lines from all transition arrays and strong absorption is located in a narrow wavelength region of 12.5-14 nm for Sn plasmas. Using a complete accurate atomic data, we investigated the opacity of Sn plasmas at a variety of physical condition. Among the respective ions of Xe{sup 6+}-Xe{sup 15+}, Xe{sup 10+} has the largest absorption cross section at 13.5 nm, while the favorable physical condition for maximal absorption at 13.5 nm do not mean that Xe{sup 10+} has the largest fraction. Comparison with other theoretical results showed that a complete set of consistent accurate atomic data, which lacks very much, is essential to predict accurate opacity. Our atomic model is useful and can be applied to interpret opacity experiments. Further benchmark experiments are urgently needed to clarify the physical effects on the opacity of Sn plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The spectra of the multicharged argon hollow ions: Observation, modeling and using for diagnostics of the early stage of the heating of clusters by a super high contrast femtosecond laser pulses

A study is made of the ultra-short laser pulse irradiation of Ar cluster targets. Experiments have been performed with large cluster sizes and using very high laser contrasts, which have allowed clear and unambiguous observation of exotic inner-shell transitions in near-neutral Ar ions. The interaction of the main laser pulse with the unperturbed target is a necessary requirement for observing these lines. Our measurements are supported by kinetics calculations in which a very detailed atomic model is used. The calculations predict all of the spectral features found experimentally, and support the notion that the X-ray emission arises from many ion stages of the Ar plasma, from near-neutral through He-like ions, and from a range of plasma temperatures and densities. Differences between X-ray argon clusters excited at the laser-cluster and laser-droplet interactions have been analyzed. X-ray spectral methods have been proposed to determine the parameters of the plasma formed at the early stages of its evolution. It has been shown that the spectra of hollow ions are the most informative in the first moments of the heating of a cluster, whereas the diagnostics of the late stages can be performed using the conventional lines of multicharged ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-ray resonant magnetic scattering and x-ray magnetic circular dichroism branching ratios, L[subscript 3] / L[subscript 2], for heavy rare earths

In this study we have used first principles electronic structure methods to investigate the detailed contributions to the L{sub 3}/L{sub 2} branching ratio in the heavy rare earth elements. The calculations use the full potential, relativistic, linear augmented plane wave method with the LSDA+U approach for consideration of the local 4f electronic orbitals. With no spin orbit coupling (SOC) in the conducting bands, and with the same radial function for the 2p{sub 3/2} and 2p{sub 1/2} core states, the branching ratio (BR) is exactly 1:-1 for the x-ray magnetic circular dichroism spectra of the ferromagnetic heavy rare earth metals. However, with full SOC the BR ranges from 1.5 to 6.0 in going from Gd to Er. The energy and spin dependence of the 5d radial functions are important. The results point to problems with modified atomic models which have been proposed to explain the BR. Recent x-ray resonant magentic scattering experiments on (Gd,Tb,Dy,Ho,Er,Tm)Ni{sub 2}Ge{sub 2} are discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Reducing the losses of optical metamaterials

The field of metamaterials is driven by fascinating and far-reaching theoretical visions, such as perfect lenses, invisibility cloaking, and enhanced optical nonlinearities. However, losses have become the major obstacle towards real world applications in the optical regime. Reducing the losses of optical metamaterials becomes necessary and extremely important. In this thesis, two approaches are taken to reduce the losses. One is to construct an indefinite medium. Indefinite media are materials where not all the principal components of the permittivity and permeability tensors have the same sign. They do not need the resonances to achieve negative permittivity, ε. So, the losses can be comparatively small. To obtain indefinite media, three-dimensional (3D) optical metallic nanowire media with different structures are designed. They are numerically demonstrated that they are homogeneous effective indefinite anisotropic media by showing that their dispersion relations are hyperbolic. Negative group refraction and pseudo focusing are observed. Another approach is to incorporate gain into metamaterial nanostructures. The nonlinearity of gain is included by a generic four-level atomic model. A computational scheme is presented, which allows for a self-consistent treatment of a dispersive metallic photonic metamaterial coupled to a gain material incorporated into the nanostructure using the finite-difference time-domain (FDTD) method. The loss compensations with gain are done for various structures, from 2D simplified models to 3D realistic structures. Results show the losses of optical metamaterials can be effectively compensated by gain. The effective gain coefficient of the combined system can be much larger than the bulk gain counterpart, due to the strong local-field enhancement.

74 ATOMIC AND MOLECULAR PHYSICS↗

Local reversible martensitic transformations as mechanisms of crystal deformation and reorientation in fcc metals

The results of studying the new mechanisms of crystal lattice deformation and reorientation-forward + reverse (over alternative systems) martensitic transformations in fcc metals (pure metals, austenitic steels, Ni{sub 3}Al alloys)-are generalized. The experimental results lying in the basis of the concepts developed are briefly reviewed. The atomic models of these transformations are presented. The mechanisms proposed make it possible to describe in a unified way a number of plastic deformation phenomena: dislocation nucleation, mechanical twinning, and the formation of strain localization bands with high-angle misorientation boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comment on 'Dirac R-matrix method for the calculation of x-ray line polarization'

In a recent article by Chen et al. [Phys. Rev. A 79, 062715 (2009)], reference is made to magnetic sublevel collision strengths in an earlier relativistic distorted-wave (RDW) article by Zhang et al. [Phys. Rev. A 41, 198 (1990)]. In the former reference, Chen et al. carried out Dirac R-matrix calculations that suggest the polarization of the 3C and 3D lines of Fe xvii, which can be computed from the magnetic sublevel collision strengths, differ from RDW results by as much as 20%. We have recently carried out a variety of RDW and Dirac R-matrix calculations of the 3C and 3D polarizations that demonstrate this quantity to be relatively insensitive to the size and details of the atomic model. Moreover, the polarizations obtained from these recent RDW and Dirac R-matrix calculations agree well, and they also agree well with the polarizations that can be obtained from the fundamental collision data published by Zhang et al. This good agreement between RDW and Dirac R-matrix polarizations contradicts the behavior reported by Chen et al.

74 ATOMIC AND MOLECULAR PHYSICS↗

Understanding Chemical Bonding in Alloys and the Representation in Atomistic Simulations

Alloys are widely used in catalysts and structural materials. The nature of chemical bonding and the origin of alloy formation energies, defect energies, and interfacial properties have not been well understood to date but are critical to material performance. In this contribution, we explain the polar nature of chemical bonding and an implementation in classical and reactive atomistic simulations to understand such properties more quantitatively. Electronegativity differences between metal atoms lead to polar bonding, and exothermic alloy formation energies are related to charge transfer between the different elements. These differences can be quantified by atomic charges using pairwise charge increments, determined by matching the computed alloy formation energy to experimentally measured alloy formation energies using pair potentials for the pure metals. The polar character of alloys is comparable to organic molecules and partially ionic minerals, for example, AlNi and AlNi3 alloys assume significant atomic charges of ±0.40e and +0.60e/–0.20e, respectively. The subsequent analysis of defect sites and defect energies using force-field-based calculations shows excellent agreement with calculations using density functional theory and embedded atom models (EAM). The formation of vacancy and antisite defects is characterized by a redistribution of charge in the first shell of neighbor atoms in the classical models whereby electroneutrality is maintained and charge increments correlate with differences in electronegativity. The proposed atomic charges represent internal dipole and multipole moments, consistent with existing definitions for organic and inorganic compounds and with the extended Born model (Heinz, H.; Suter, U. W. J. Phys. Chem. B2004,108 (47), 18341–18352). The method can be applied to any alloy and has a reproducibility of ±10%. In contrast, quantum mechanical charge schemes remain associated with deviations exceeding ±100%. The atomic charges for alloys provide a simple initial measure for the internal electronic structure, surface adsorption of molecules, and reactivity in catalysis and corrosion. The models are compatible with the Interface force field (IFF), CHARMM, AMBER, OPLS-AA, PCFF, CVFF, and GROMOS for reliable atomistic simulations of alloys and their interfaces with minerals and electrolytes from the nanometer scale to the micrometer scale.

Chemistry↗

Electron-ion collision-frequency for x-ray Thomson scattering in dense plasmas

Two methods are presented to calculate the electron-ion collision-frequency in dense plasmas using an average-atom model. The first one is based on the Kubo-Greenwood approach. The second one uses the Born and Lenard-Balescu approximations. The two methods are used to calculate x-ray Thomson scattering spectra. Illustrations are shown for dense beryllium and aluminum plasmas. Comparisons with experiment are presented in the case of an x-ray Thomson scattering spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron Tomography of Cryofixed, Isometrically Contracting Insect Flight Muscle Reveals Novel Actin-Myosin Interactions

Isometric muscle contraction, where force is generated without muscle shortening, is a molecular traffic jam in which the number of actin-attached motors is maximized and all states of motor action are trapped with consequently high heterogeneity. This heterogeneity is a major limitation to deciphering myosin conformational changes in situ. We used multivariate data analysis to group repeat segments in electron tomograms of isometrically contracting insect flight muscle, mechanically monitored, rapidly frozen, freeze substituted, and thin sectioned. Improved resolution reveals the helical arrangement of F-actin subunits in the thin filament enabling an atomic model to be built into the thin filament density independent of the myosin. Actin-myosin attachments can now be assigned as weak or strong by their motor domain orientation relative to actin. Myosin attachments were quantified everywhere along the thin filament including troponin. Strong binding myosin attachments are found on only four F-actin subunits, the 'target zone', situated exactly midway between successive troponin complexes. They show an axial lever arm range of 77{sup o}/12.9 nm. The lever arm azimuthal range of strong binding attachments has a highly skewed, 127{sup o} range compared with X-ray crystallographic structures. Two types of weak actin attachments are described. One type, found exclusively in the target zone, appears to represent pre-working-stroke intermediates. The other, which contacts tropomyosin rather than actin, is positioned M-ward of the target zone, i.e. the position toward which thin filaments slide during shortening. We present a model for the weak to strong transition in the myosin ATPase cycle that incorporates azimuthal movements of the motor domain on actin. Stress/strain in the S2 domain may explain azimuthal lever arm changes in the strong binding attachments. The results support previous conclusions that the weak attachments preceding force generation are very different from strong binding attachments.

59 BASIC BIOLOGICAL SCIENCES↗

Laboratory Calibration of Density-Dependent Lines in the EUV and Soft X-Ray Regions

We analyzed spectral data of Fe XXII and Ar XIV from laboratory sources in which the electron density varies by several orders of magnitude to help benchmark density-sensitive emission lines useful for astrophysics and to test the atomic models underlying the diagnostic line ratios. We found excellent agreement for Fe XXII, but poorer agreement for Ar XIV. A number of astrophysically important emission lines are sensitive to electron density in the EUV and soft X-ray regions. Lines from Fe XXII, for example, have been used in recent years as diagnostics of stellar coronae, such as the active variable AB Dor, Capella, and EX Hya (Sanz-Forcada et al. 2003, Mewe et al. 2001, Mauche et al. 2003). Here we report spectral data of Fe XXII and Ar XIV from laboratory sources in which the electron density is known from either K-shell density diagnostics (for electron beam ion traps) or from non-spectroscopic means (tokamaks), ranging from 5 x 10{sup 10} cm{sup -3} to 5 x 10{sup 14} cm{sup -3}. These measurements were used to test the atomic data underlying the density diagnostic line ratios, complementing earlier work (Chen et al. 2004).

74 ATOMIC AND MOLECULAR PHYSICS↗

Insights into the Inhibition of the p90 Ribosomal S6 Kinase (RSK) by the Flavonol Glycoside SL0101 from the 1.5 Å Crystal Structure of the N-Terminal Domain of RSK2 with Bound Inhibitor

The p90 ribosomal S6 family of kinases (RSK) are potential drug targets, due to their involvement in cancer and other pathologies. There are currently only two known selective inhibitors of RSK, but the basis for selectivity is not known. One of these inhibitors is a naturally occurring kaempferol-a-l-diacetylrhamnoside, SL0101. Here, we report the crystal structure of the complex of the N-terminal kinase domain of the RSK2 isoform with SL0101 at 1.5 {angstrom} resolution. The refined atomic model reveals unprecedented structural reorganization of the protein moiety, as compared to the nucleotide-bound form. The entire N-lobe, the hinge region, and the aD-helix undergo dramatic conformational changes resulting in a rearrangement of the nucleotide binding site with concomitant formation of a highly hydrophobic pocket spatially suited to accommodate SL0101. These unexpected results will be invaluable in further optimization of the SL0101 scaffold as a promising lead for a novel class of kinase inhibitors.

59 BASIC BIOLOGICAL SCIENCES↗

Molecular dynamics study of a polymeric reverse osmosis membrane.

Molecular dynamics (MD) simulations are used to investigate the properties of an atomic model of an aromatic polyamide reverse osmosis membrane. The monomers forming the polymeric membrane are cross-linked progressively on the basis of a heuristic distance criterion during MD simulations until the system interconnectivity reaches completion. Equilibrium MD simulations of the hydrated membrane are then used to determine the density and diffusivity of water within the membrane. Given a 3 MPa pressure differential and a 0.125 {micro}m width membrane, the simulated water flux is calculated to be 1.4 x 10{sup -6} m/s, which is in fair agreement with an experimental flux measurement of 7.7 x 10{sup -6} m/s.

74 ATOMIC AND MOLECULAR PHYSICS↗

Synthesis of reduced carbon nitride at the reduction by hydroquinone of water-soluble carbon nitride oxide (g-C{sub 3}N{sub 4})O

For the first time at the reduction by hydroquinone of water-soluble carbon nitride oxide (g-C{sub 3}N{sub 4})O reduced carbon nitride (or reduced multi-layer azagraphene) is obtained. It is differed from usually synthesized carbon nitride by a significantly large (on 0.09 nm) interplanar distance is. At the same time, the chemical bonds between atoms in a heteroatomic plane of reduced carbon nitride correspond to the bonds in a synthesized g-C{sub 3}N{sub 4}. The samples of water-soluble carbon nitride oxide were synthesized under the special reactionary conditions of a pyrolysis of melamine and urea. We believe that reduced carbon nitride consists of weakly connected carbon-nitrogen monosheets (azagraphene sheets) as well as reduced (from graphene oxide) graphene contains weakly connected graphene sheets. - Graphical abstract: XRD pattern and schematic atomic model of one layer of reduced carbon nitride, carbon nitride oxide and synthesized carbon nitride. For the first time at the reduction by hydroquinone of the water-soluble carbon nitride oxide (g-C{sub 3}N{sub 4})O is obtained the reduced carbon nitride (or reduced multi-layer azagraphene). Display Omitted - Highlights: • First the reduced carbon nitride (RCN) at the reduction of the carbon nitride oxide was obtained. • Water-soluble carbon nitride oxide was reduced by hydroquinone. • The chemical bonds in a heteroatomic plane of RCN correspond to the bonds in a synthesized g-C{sub 3}N{sub 4}. • Reduced carbon nitride consists of poorly connected heteroatomic azagraphene layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Equations of state and transport properties of mixtures in the warm dense regime

We have performed average-atom molecular dynamics to simulate the CH and LiH mixtures in the warm dense regime, and obtained equations of state and the ionic transport properties. The electronic structures are calculated by using the modified average-atom model, which have included the broadening of energy levels, and the ion-ion pair potentials of mixtures are constructed based on the temperature-dependent density functional theory. The ionic transport properties, such as ionic diffusion and shear viscosity, are obtained through the ionic velocity correlation functions. The equations of state and transport properties for carbon, hydrogen and lithium, hydrogen mixtures in a wide region of density and temperature are calculated. Through our computing the average ionization degree, average ion-sphere diameter and transition properties in the mixture, it is shown that transport properties depend not only on the ionic mass but also on the average ionization degree.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of electron density in complex plasmas of the PK-3 plus apparatus on the International Space Station

Dust particles in discharge are often levitated in a sheath region rather than in bulk plasma under gravitational conditions (on Earth). Gravity compresses dust clouds, and the gravitational force restricts the motion of the dust particles. Microgravity gives the plasmas, including dust particles, so-called complex (dusty) plasmas, where dust particles are embedded in a completely charge-neutral region of the bulk plasma. The dust cloud, as an uncompressed strongly-coupled Coulomb system, corresponds to an atomic model with physical phenomena, e.g., crystallization, phase transition, and so on. Since the phenomena are tightly connected to plasma states expressed by plasma parameters, it is significant to estimate the plasma parameters, such as electron density and temperature. The present work shows the electron density measured by the frequency shift probe in the apparatus for microgravity experiments currently boarding on the International Space Station (PK-3 plus). The frequency shift probe measurement gave electron density in the order of 10{sup 8} cm{sup -3} as a typical value in the apparatus, and demonstrated the detection of electrons in plasmas with dust particles. The spatial distribution profile of the electron density obtained in this measurement presents an aspect for the void formation of dust clouds under microgravity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural and magnetic properties of La2Ni1−xCoxMnO6 compounds

Highlights: • Monoclinic La2Ni1−xCoxMnO6 samples have been prepared using Sol-gel technique. • Rietveld analysis shows an octahedrally distorted double perovskite structure. • The nature of FM interaction and TC depend on the B-site ions. • The short range FM ordering above TC is induced by antisite disorders. • The existence of any spin glass like phase in such system is discarded. - Abstract: Single phase monoclinic La{sub 2}Ni{sub 1−x}Co{sub x}MnO{sub 6} (x = 0.2, 0.4, 0.8) compounds, henceforth, referred as LNC{sub x}MO (x = 0.2, 0.4, 0.8) have been prepared by Sol–gel technique. The structural study and redox titration suggest that the samples are both La and O deficient. The generated atomic models using Rietveld refined structural parameters show octahedral distortion in the double perovskite structure. X-ray photoelectron spectroscopy (XPS) study has been used to determine the predominant valence states of Ni, Mn and Co ions. LNC{sub x}MO (x = 0.2, 0.4) are found to be Heisenberg ferromagnets whereas LNC{sub 0.8}MO is a phase segregated system. In LNC{sub 0.4}MO and LNC{sub 0.8}MO, at temperatures above T{sub C}, χ{sup −1}(T) curve shows the characteristics of Griffiths phase. The study of ac susceptibility and isothermal remanent magnetization (IRM) discard the possibility of any glassy state at low temperatures. The antiphase boundaries (APBs), antisite disorders (ASDs) and oxygen vacancies play important roles in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

MD simulations of phase stability of PuGa alloys: Effects of primary radiation defects and helium bubbles

We present classical molecular dynamics (MD) with Modified Embedded Atom Model (MEAM) simulations to investigate the role of primary radiation defects and radiogenic helium as factors affecting the phase stability of PuGa alloys in cooling–heating cycles at ambient pressure. The models of PuGa alloys equilibrated at ambient conditions were subjected to cooling–heating cycles in which they were initially cooled down to 100 K and then heated up to 500 K at ambient pressure. The rate of temperature change in the cycles was 10 K/ns. The simulations showed that the initial FCC phase of PuGa alloys undergo polymorphous transition in cooling to a lower symmetry α'-phase. All the alloys undergo direct and reverse polymorphous transitions in the cooling–heating cycles. The alloys containing vacancies shift in both transitions to lower temperatures relative to the defect-free alloys. The radiogenic helium has much less effect on the phase stability compared to that of primary radiation defects (in spite of the fact that helium concentration is twice of that for the primary radiation defects). Lastly, this computational result agrees with experimental data on unconventional stabilization mechanism of PuGa alloys.

36 MATERIALS SCIENCE↗

Bulkiness or aromatic nature of tyrosine-143 of actin is important for the weak binding between F-actin and myosin-ADP-phosphate

Highlights: •The effect of mutation of Tyr143 that becomes more exposed on assembly was examined. •Mutation of tyrosine-143 of Dictyostelium actin changed actin polymerizability. •The bulkiness or aromatic nature of Tyr143 is important for the weak binding. •The weak interaction between myosin and actin strengthened by Tyr143Trp mutation. -- Abstract: Actin filaments (F-actin) interact with myosin and activate its ATPase to support force generation. By comparing crystal structures of G-actin and the quasi-atomic model of F-actin based on high-resolution cryo-electron microscopy, the tyrosine-143 was found to be exposed more than 60 Å{sup 2} to the solvent in F-actin. Because tyrosine-143 flanks the hydrophobic cleft near the hydrophobic helix that binds to myosin, the mutant actins, of which the tyrosine-143 was replaced with tryptophan, phenylalanine, or isoleucine, were generated using the Dictyostelium expression system. It polymerized significantly poorly when induced by NaCl, but almost normally by KCl. In the presence of phalloidin and KCl, the extents of the polymerization of all the mutant actins were comparable to that of the wild-type actin so that the actin-activated myosin ATPase activity could be reliably compared. The affinity of skeletal heavy meromyosin to F-actin and the maximum ATPase activity (V{sub max}) were estimated by a double reciprocal plot. The Tyr143Trp-actin showed the higher affinity (smaller K{sub app}) than that of the wild-type actin, with the V{sub max} being almost unchanged. The K{sub app} and V{sub max} of the Tyr143Phe-actin were similar to those of the wild-type actin. However, the activation by Tyr143Ile-actin was much smaller than the wild-type actin and the accurate determination of K{sub app} was difficult. Comparison of the myosin ATPase activated by the various mutant actins at the same concentration of F-actin showed that the extent of activation correlates well with the solvent-accessible surface areas (ASA) of the replaced amino acid molecule. Because 1/K{sub app} reflects the affinity of F-actin for the myosin–ADP-phosphate intermediate (M.ADP.Pi) through the weak binding, these data suggest that the bulkiness or the aromatic nature of the tyrosin-143 is important for the initial binding of the M.ADP.Pi intermediate with F-actin but not for later processes such as the phosphate release.

60 APPLIED LIFE SCIENCES↗