Search NASA⌕ Search

SEARCH · Search NASA

Results for “Accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

The accuracy of automatic tracking

It has been generally assumed that tracking accuracy changes similarly to the rate of change of the curve of the measurement conversion. The problem that internal noise increases along with the signals processed by the tracking device and that tracking accuracy thus drops were considered. The main prerequisite for solution is consideration of the dependences of the output signal of the tracking device sensor not only on the measured parameter but on the signal itself.

Kastrov, V. V.↗
NASA NTRS1974

Evaluating the accuracy of selenodesic reference grids

Estimates were made of the accuracy of reference point grids using the technique of calculating the errors from theoretical analysis. Factors taken into consideration were: telescope accuracy, number of photographs, and libration amplitude. To solve the problem, formulas were used for the relationship between the coordinates of lunar surface points and their images on the photograph.

Koptev, A. A.↗
NASA NTRS1975

Digital phase-locked-loop speed sensor for accuracy improvement in analog speed controls

A digital speed control that can be combined with a proportional analog controller is described. The stability and transient response of the analog controller were retained and combined with the long-term accuracy of a crystal-controlled integral controller. A relatively simple circuit was developed by using phase-locked-loop techniques and total error storage. The integral digital controller will maintain speed control accuracy equal to that of the crystal reference oscillator.

Birchenough, A. G.↗
NASA NTRS1975

Estimation of the accuracy with which the position of the center of mass of an Interkosmos series artificial earth satellite is calculated

The effects of disturbing forces on position calculation, and errors in the initial conditions of motion and in the selected assignment calculation schemes are estimated. It is shown that the main disturbing effects on the accuracy are due to density variations of the upper atmosphere. Recommendations are presented for estimating the calculation accuracy along with an example of such an estimate for the Interkosmos-7 artificial earth satellite. Other factors considered include the adopted scheme and computational algorithms used, effects of disturbing forces not taken into account earlier, and errors in the values of constants and in models of disturbing forces.

Elyasberg, P. Y.↗
NASA NTRS1975

Accuracy of site coordinates obtainable by a mobile lunar laser station

The accuracy with which a mobile lunar laser station can be located was the subject of a modeling study. The influence of the number and accuracy of fixed lunar ranging stations, the uncertainty in polar motion, and data loss due to weather and similar factors were considered, and the results are given in a cartographic form. In general, all three coordinates (for coordinates to latitude + or - 60 deg) were determined to better than the pole uncertainty, given three or more fixed sites and reasonable weather. This result indicates that one or more mobile stations would be suitable for the study of geotectonics.

Loumos, G. L.↗
NASA NTRS1974

The influence of the computational mesh on accuracy for initial value problems with discontinuous or nonunique solutions

Discontinuous, or weak, solutions of the wave equation, the inviscid form of Burgers equation, and the time-dependent, two-dimensional Euler equations are studied. A numerical method of second-order accuracy in two forms, differential and integral, is used to calculate the weak solutions of these equations for several initial value problems, including supersonic flow past a wedge, a double symmetric wedge, and a sphere. The effect of the computational mesh on the accuracy of computed weak solutions including shock waves and expansion phenomena is studied. Modifications to the finite-difference method are presented which aid in obtaining desired solutions for initial value problems in which the solutions are nonunique.

Maccormack, R. W.↗
NASA NTRS1975

The Shuttle Orbital Maneuvering System P-V-T Propellant Quantity Gaging Accuracy and Leak Detection Allowance for Four Instrumentation Conditions

The shuttle orbital maneuvering system (OMS) pressure-volume-temperature (P-V-T) propellant gaging module computes the quantity of usable OMS propellant remaining based on the real gas P-V-T relationship for the propellant tank pressurant, helium. The OMS P-V-T propellant quantity gaging error was determined for four sets of instrumentation configurations and accuracies with the propellant tank operating in the normal constant pressure mode and in the blowdown mode. The instrumentation inaccuracy allowance for propellant leak detection was also computed for these same four sets of instrumentation. These gaging errors and leak detection allowances are presented in tables designed to permit a direct comparison of the effectiveness of the four instrumentation sets. The results show the magnitudes of the improvements in propellant quantity gaging accuracies and propellant leak detection allowances which can be achieved by employing more accurate pressure and temperature instrumentation.

Duhon, D. D.↗
NASA NTRS1975

An analysis of the accuracy and cost-effectiveness of a cropland inventory utilizing remote sensing techniques

Cropland inventories utilizing high altitude and Landsat imagery were conducted in Kern County, California. It was found that in terms of the overall mean relative and absolute inventory accuracies, a Landsat multidate analysis yielded the most optimum results, i.e., 98% accuracy. The 1:125,000 CIR high altitude inventory is a serious alternative which can be very accurate (97% or more) if imagery is available for a specific study area. The operational remote sensing cropland inventories documented in this study are considered cost-effective. When compared to conventional survey costs of $62-66 per 10,000 acres, the Landsat and high-altitude inventories required only 3-5% of this amount, i.e., $1.97-2.98.

Jensen, J. R.↗
NASA NTRS1976

A demonstration of a transportable radio interferometric surveying system with 3-cm accuracy on a 307-m base line

A precision geodetic measurement system (Aries, for Astronomical Radio Interferometric Earth Surveying) based on the technique of very long base line interferometry has been designed and implemented through the use of a 9-m transportable antenna and the NASA 64-m antenna of the Deep Space Communications Complex at Goldstone, California. A series of experiments designed to demonstrate the inherent accuracy of a transportable interferometer was performed on a 307-m base line during the period from December 1973 to June 1974. This short base line was chosen in order to obtain a comparison with a conventional survey with a few-centimeter accuracy and to minimize Aries errors due to transmission media effects, source locations, and earth orientation parameters. The base-line vector derived from a weighted average of the measurements, representing approximately 24 h of data, possessed a formal uncertainty of about 3 cm in all components. This average interferometry base-line vector was in good agreement with the conventional survey vector within the statistical range allowed by the combined uncertainties (3-4 cm) of the two techniques.

Ong, K. M.↗
NASA NTRS1976

Navigation accuracy analysis for the Mariner-Jupiter-Saturn 1977 mission

The results of the latest navigation capability study for the Mariner-Jupiter-Saturn 1977 mission are presented and analyzed. Predicted planet-relative and satellite-relative accuracies are given for radio only and radio plus optical approach navigation on three representative trajectories. In addition, planet-relative accuracies are given for cruise navigation on one of the trajectories. The dynamical and measurement error models used in the study are discussed, and the basic MJS77 navigation strategy is described. The navigation capability is evaluated in the light of the mission's objectives; and the variation in capability among the three trajectories is examined with regard to the effects of the major error sources and the trajectory dependent encounter geometries.

Jacobson, R. A.↗
NASA NTRS1976

Forest Classification Accuracy as Influenced by Multispectral Scanner Spatial Resolution

The author has identified the following significant results. A supervised classification within two separate ground areas of the Sam Houston National Forest was carried out for two sq meters spatial resolution MSS data. Data were progressively coarsened to simulate five additional cases of spatial resolution ranging up to 64 sq meters. Similar processing and analysis of all spatial resolutions enabled evaluations of the effect of spatial resolution on classification accuracy for various levels of detail and the effects on area proportion estimation for very general forest features. For very coarse resolutions, a subset of spectral channels which simulated the proposed thematic mapper channels was used to study classification accuracy.

Nalepka, R. F.↗
NASA NTRS1976

Evaluation of Landsat image registration accuracy

The Large Area Crop Inventory Experiment (LACIE) is an attempt to demonstrate the capability to forecast the annual production of major crops such as wheat and corn. Good image registration of data acquired on different dates is one of the key assumptions made in LACIE. This paper describes an algorithm to measure the accuracy of the current registration procedure. This algorithm employs a modified version of sequential similarity detection algorithm (SSDA). Based on over 264 registration checks, it was found that the root-mean-square of registration errors was 1.0 pixel. The failure rate of our registration checking algorithm was less than 10 per cent and the standard deviation of the accuracy of this algorithm was less than 0.2 picture element.

Kaneko, T.↗
NASA NTRS1977

A high accuracy all-angle gyroscope readout using quantized flux

Means are described to use SQUID magnetometer flux counting and the London moment of a spherical superconducting gyroscope to read out the gyroscope spin axis direction to an accuracy of at least 23 bits per quadrant. The system is discussed in analogy to optical fringe counting as applied to distance measurement. Several methods of applying both analog and digital SQUID magnetometers to the readout problem are given, as well as limitations on each. Described are two methods of increasing the flux available for measurement: magnetizing the gyroscope with a trapped field, and optimizing readout circuit inductances. Finally, the same principle on which the gyroscope readout is based is applied to a description of a high accuracy, flux counting, digital angle encoder.

Anderson, J. T.↗
NASA NTRS1976

An estimate of the geodetic accuracy attainable with a transportable lunar laser station

A transportable lunar laser ranging station can be expected to measure the range to the lunar corner retroreflectors from a site on the earth's surface with an uncertainty of about 3 cm. The accuracy with which that station can infer its geocentric position is influenced by many factors including the uncertainties in the pole position and rotation rate of the earth and the data loss due to weather. The results of a simplified modeling study intended to include these factors are presented in cartographic form. The modeling indicates that, assuming the successful operation of three or more widely separated fixed laser stations, the transportable station will be able to determine its relative geocentric position in all three coordinates with an accuracy comparable to the original range uncertainty.

Silverberg, E. C.↗
NASA NTRS1977

Testing the accuracy of remote sensing land use maps

Some of the main aspects that need to be considered in a remote sensing sampling design are: (1) the frequency that any one land use type (on the ground) is erroneously attributed to another class by the interpreter; (2) the frequency that the wrong land use (as observed on the ground) is erroneously included in any one class by the remote sensing interpreter; (3) the proportion of all land (as determined in the field) that is mistakenly attributed by the interpreter; and (4) the determination of whether the mistakes are random (so that the overall proportions are approximately correct) or subject to a persistent bias. A sampling and statistical testing procedure is presented which allows an approximate answer to each of these aspects. The concept developed and described incorporates the probability of making incorrect interpretations at particular prescribed accuracy levels, for a certain number of errors, for a particular sample size. It is considered that this approach offers a meaningful explanation of the interpretation accuracy level of an entire remote sensing land use survey.

Vangenderen, J. L.↗
NASA NTRS1978

The accuracy of geopotential models

The accuracy of two recent geopotential models, GEM 7 and GEM 8, is evaluated and is found to be about 4.3 m with respect to the global geoid surface for GEM 7 and 3.9 m for GEM 8. The accuracies are root mean square values obtained by the use of 400 coefficients for GEM 7 and 706 coefficients for GEM 8. Independent observations used in the evaluation include 159 lumped coefficients from 35 resonant orbits, two sets of fields derived from optical-only and laser-only data, sets of zonal and resonant coefficients, and geoid undulations. The ratio of estimated commission to formal error in GEM 7 and GEM 8 ranges from 2 to 5. Several other recent geopotential models are examined.

Wagner, C. A.↗
NASA NTRS1978

Improving forest cover classification accuracy from Landsat by incorporating topographic information

The paper shows that accuracies of computer classification of species-specific forest cover types from Landsat imagery can be improved by 27% or more through the incorporation of topographic information from digital terrain tapes registered to multidate Landsat imagery. The topographic information improves classification accuracies because many common forest tree species have preferred elevation ranges and slope aspects. These preferences allow the separation of forest cover types which have similar spectral signatures but different species compositions. It is noted that the development of a classification system which uses prior probabilities and sets of prior probabilities conditioned by one or two external variables represents a significant increase in classification power.

Strahler, A. H.↗
NASA NTRS1978

The accuracy of the narrow seal approximation in analyzing radial face seals

The accuracy of the narrow seal approximation which enables closed form analytical solutions for radial face seals is examined in this paper. Both hydrostatic and hydrodynamic effects in a flat, misaligned seal are considered. Analytical results obtained from a simplified Reynolds equation, based on the neglect of circumferential pressure gradient and seal curvature, are compared with accurate results from numerical solution of the complete Reynolds equation. The agreement between the approximate and accurate solutions is quite reasonable over a wide range of a seal's inner-to-outer radius ratio. For radius ratios greater than 0.8, the accuracy of the narrow seal approximation is better than 1 percent over most of the range of angular misalignment.

Etsion, I.↗