SEARCH · Search NASA

Results for “Aerodynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1976

Steady incompressible variable thickness shear layer aerodynamics

A shear flow aerodynamic theory for steady incompressible flows is presented for both the lifting and non lifting problems. The slow variation of the boundary layer thickness is considered. The slowly varying behavior is treated by using multitime scales. The analysis begins with the elementary wavy wall problem and, through Fourier superpositions over the wave number space, the shear flow equivalents to the aerodynamic transfer functions of classical potential flow are obtained. The aerodynamic transfer functions provide integral equations which relate the wall pressure and the upwash. Computational results are presented for the pressure distribution, the lift coefficient, and the center of pressure travel along a two dimensional flat plate in a shear flow. The aerodynamic load is decreased by the shear layer, compared to the potential flow. The variable thickness shear layer decreases it less than the uniform thickness shear layer based upon equal maximum shear layer thicknesses.

Chi, M. R.↗

NASA NTRS1976

Theoretical and empirical low perigee aerodynamic heating during orbital flight of an atmosphere explorer

This document presents the results of an extensive, low perigee, orbital aerodynamic heating study undertaken in support of the Atmosphere Explorer-C Temperature Alarm. Based upon in-flight orbital temperature data from the Temperature Alarm tungsten resistance wire thermometer, aerodynamic heating rates have been determined for eight selected orbits by means of a reduced thermal analytical model verified by both ground test and flight data. These heating rates are compared with the classical free molecular and first order collision regime values. It has been concluded that, for engineering purposes, the aerodynamic heating rate of atmospheric gases at perigee altitudes between 170 and 135 km on pure tungsten wire is 30 to 60% of the value set by the classical free molecular limit. Relative to the more usual orbital thermal input attributable to direct solar radiation, the aerodynamic heating rate at the lowest altitude attempted with the spacecraft despun (135 km) is the equivalent of about 1.2 solar constants incident on a tungsten wire with a solar absorptivity of 0.85.

Caruso, P. S., Jr.↗

NASA NTRS1977

Investigation of real-gas and viscous effects on the aerodynamic characteristics of a 40 deg half-cone with suggested correlations for the shuttle orbiter

Parameters were evaluated that might be used to correlate shuttle orbiter aerodynamic data to be used in extrapolating from wind-tunnel to flight conditions. Preliminary calculations indicate that the lee-side forces will have an insignificant influence on the aerodynamic characteristics of the orbiter for moderate angle-of-attack entries; therefore, this work is focused on phenomena which have an overriding influence on windward forces, namely, real-gas (equilibrium and nonequilibrium) and viscous-interaction effects. Analytically determined flow fields previously obtained on 40 deg blunted cones were used as a data source to evaluate various correlation parameters. Inviscid effects were found to be the dominant contributor to the aerodynamic coefficients in the altitude range of 64 to 76.2 km. The most suitable correlation of the aerodynamic forces on these cones is based on local dynamic pressure and local Mach number.

Hunt, J. L.↗

NASA NTRS1977

Recent advances in aerodynamic energy concept for flutter suppression and gust alleviation using active controls

Control laws are derived, by using realizable transfer functions, which permit relaxation of the stability requirements of the aerodynamic energy concept. The resulting aerodynamic eigenvalues indicate that both the trailing edge and the leading edge-trailing edge control systems can be made more effective. These control laws permit the introduction of aerodynamic damping and stiffness terms in accordance with the requirements of any specific system. Flutter suppression and gust alleviation problems can now be treated by either a trailing edge control system or by a leading edge-trailing edge control system by using the aerodynamic energy concept. Results are applicable to a wide class of aircraft operating at subsonic Mach numbers.

Nissim, E.↗

NASA NTRS1977

Scramjet exhaust simulation technique for hypersonic aircraft nozzle design and aerodynamic tests

Current design philosophy for scramjet-powered hypersonic aircraft results in configurations with the entire lower fuselage surface utilized as part of the propulsion system. The lower aft-end of the vehicle acts as a high expansion ratio nozzle. Not only must the external nozzle be designed to extract the maximum possible thrust force from the high energy flow at the combustor exit, but the forces produced by the nozzle must be aligned such that they do not unduly affect aerodynamic balance. The strong coupling between the propulsion system and aerodynamics of the aircraft makes imperative at least a partial simulation of the inlet, exhaust, and external flows of the hydrogen-burning scramjet in conventional facilities for both nozzle formulation and aerodynamic-force data acquisition. Aerodynamic testing methods offer no contemporary approach for such vehicle design requirements. NASA-Langley has pursued an extensive scramjet/airframe integration R&D program for several years and has recently developed a promising technique for simulation of the scramjet exhaust flow for hypersonic aircraft. Current results of the research program to develop a scramjet flow simulation technique through the use of substitute gas blends are described in this paper.

Hunt, J. L.↗

NASA NTRS1978

Future requirements and roles of computers in aerodynamics

While faster computers will be needed to make solution of the Navier-Stokes equations practical and useful, most all of the other aerodynamic solution techniques can benefit from faster computers. There is a wide variety of computational and measurement techniques, the prospect of more powerful computers permits extension and an enhancement across all aerodynamic methods, including wind-tunnel measurement. It is expected that, as in the past, a blend of methods will be used to predict aircraft aerodynamics in the future. These will include methods based on solution of the Navier-Stokes equations and the potential flow equations as well as those based on empirical and measured results. The primary flows of interest in aircraft aerodynamics are identified, the predictive methods currently in use and/or under development are reviewed and two of these methods are analyzed in terms of the computational resources needed to improve their usefulness and practicality.

Gregory, T. J.↗

NASA NTRS1976

Powered-Lift Aerodynamics and Acoustics

Powered lift technology is reviewed. Topics covered include: (1) high lift aerodynamics; (2) high speed and cruise aerodynamics; (3) acoustics; (4) propulsion aerodynamics and acoustics; (5) aerodynamic and acoustic loads; and (6) full-scale and flight research.

Source record↗

NASA NTRS1978

Fundamental Aspects of the Aerodynamics of Turbojet Engine Combustors

Aerodynamic considerations in the design of high performance combustors for turbojet engines are discussed. Aerodynamic problems concerning the preparation of the fuel-air mixture, the recirculation zone where primary combustion occurs, the secondary combustion zone, and the dilution zone were examined. An aerodynamic analysis of the entire primary chamber ensemble was carried out to determine the pressure drop between entry and exit. The aerodynamics of afterburn chambers are discussed. A model which can be used to investigate the evolution of temperature, pressure, and rate and efficiency of combustion the length of the chamber was developed.

Barrere, M.↗

NASA NTRS1978

Effect of flow separation vortices on aircraft unsteady aerodynamics

The unsteady aerodynamic flow field over the space shuttle orbiter was studied. The results indicate at moderate to high angles of attack separation-induced vortices exact a dominating influence on the unsteady aerodynamics of the space shuttle orbiter and of high performance aircraft. The main characteristics are as follows: (1) The vortex-induced aerodynamic loads are large and highly nonlinear, sometimes discontinuous in character; and (2) the vortex-induced loads have opposite effects on static and dynamic stability characteristics. Analytic approximations are presented which can predict these vortex-induced aerodynamic effects with the accuracy needed for most engineering design.

Ericsson, L. E.↗

NASA NTRS1981

Aerodynamic preliminary analysis system 2. Part 1: Theory

A subsonic/supersonic/hypersonic aerodynamic analysis was developed by integrating the Aerodynamic Preliminary Analysis System (APAS), and the inviscid force calculation modules of the Hypersonic Arbitrary Body Program. APAS analysis was extended for nonlinear vortex forces using a generalization of the Polhamus analogy. The interactive system provides appropriate aerodynamic models for a single input geometry data base and has a run/output format similar to a wind tunnel test program. The user's manual was organized to cover the principle system activities of a typical application, geometric input/editing, aerodynamic evaluation, and post analysis review/display. Sample sessions are included to illustrate the specific task involved and are followed by a comprehensive command/subcommand dictionary used to operate the system.

Bonner, E.↗

NASA NTRS1981

Aerodynamic mathematical modeling - basic concepts

This lecture is a review of the basic concepts involved In the mathematical modeling of the aerodynamic response of an aircraft to arbitrary maneuvers. The review leads from Bryan's original formulation through the concepts of linear aerodynamic indicial functions and superposition to the extension of these concepts into the nonlinear regime. The nonlinear generalization yields a form for the aerodynamic response that can be built up from the responses to a limited number of well-defined characteristic motions, reproducible in principle either in wind-tunnel experiments or flow-field computations. A further generalization leads to a torn, accommodating the discontinuous and double-valued behavior characteristic of hysteresis in the steady-state aerodynamic response

Murray Tobak↗

NASA NTRS1981

Development of an efficient procedure for calculating the aerodynamic effects of planform variation

Numerical procedures to compute gradients in aerodynamic loading due to planform shape changes using panel method codes were studied. Two procedures were investigated: one computed the aerodynamic perturbation directly; the other computed the aerodynamic loading on the perturbed planform and on the base planform and then differenced these values to obtain the perturbation in loading. It is indicated that computing the perturbed values directly can not be done satisfactorily without proper aerodynamic representation of the pressure singularity at the leading edge of a thin wing. For the alternative procedure, a technique was developed which saves most of the time-consuming computations from a panel method calculation for the base planform. Using this procedure the perturbed loading can be calculated in about one-tenth the time of that for the base solution.

Mercer, J. E.↗

NASA NTRS1982

On-orbit free molecular flow aerodynamic characteristics of a proposal space operations center configuration

A proposed configuration for a Space Operations Center is presented in its eight stages of buildup. The on orbit aerodynamic force and moment characteristics were calculated for each stage based upon free molecular flow theory. Calculation of the aerodynamic characteristics was accomplished through the use of an orbital aerodynamic computer program, and the computation method is described with respect to the free molecular theory used. The aerodynamic characteristics are presented in tabulated form for each buildup stage at angles of attack from 0 to 360 degrees and roll angles from -60 to +60 degrees. The reference altitude is 490 kilometers, however, the data should be applicable for altitudes below 490 kilometers down to approximately 185 kilometers.

Romere, P. O.↗

NASA NTRS1981

Aerodynamic potpourri

Aerodynamic developments for vertical axis and horizontal axis wind turbines are given that relate to the performance and aerodynamic loading of these machines. Included are: (1) a fixed wake aerodynamic model of the Darrieus vertical axis wind turbine; (2) experimental results that suggest the existence of a laminar flow Darrieus vertical axis turbine; (3) a simple aerodynamic model for the turbulent windmill/vortex ring state of horizontal axis rotors; and (4) a yawing moment of a rigid hub horizontal axis wind turbine that is related to blade coning.

Wilson, R. E.↗

NASA NTRS1982

Elastic deformation effects on aerodynamic characteristics for a high-aspect-ratio supercritical-wing model

The results of an investigation of the deformations of a high-aspect-ratio, force/pressure, supercritical-wing model during wind tunnel tests and the effects these deformations have on the wing aerodynamics are presented. A finite element model of the wing was developed, and then, for conditions corresponding to wind tunnel test points, experimental aerodynamic loads and theoretical aerodynamic loads were applied to the finite element model. Comparisons were made between the results of these load conditions for changes in structural deflections and for changes in aerodynamic characteristics. The results show that the deformations are quite small and that the pressure data are not significantly affected by model deformation.

Watson, J. J.↗

NASA NTRS1981

Development and validation of the V/STOL aerodynamics and stability and control manual

A V/STOL Aerodynamics and Stability and Control Manual was developed to provide prediction methods which are applicable to a wide range of V/STOL configurations in hover and transition flight, in and out of ground effect. Propulsion-induced effects have been combined with unpowered aerodynamics in a buildup of total forces and moments for the jet-lift concept, so that total aerodynamics can be used to predict aircraft stability, control, and flying qualities characteristics. Results of longitudinal aerodynamic predictions have been compared with test data, and indicate that the methods are fast, inexpensive, and within the desired accuracy for the objective preliminary design stage.

Henderson, C.↗

NASA NTRS1982

Transonic aerodynamics; Transonic Perspective Symposium, Moffett Field, CA, February 18-20, 1981, Technical Papers

After an historical account of the development of transonic aerodynamics before 1940 and in the period 1945-1975, attention is given to the design for cruise performance efficiency of commercial transport aircraft, with emphasis on transonic wing design, the practical aerodynamic problems of military aircraft, with emphasis on store carriage and separation, experimental testing in transonic wind tunnels capable of Reynolds number simulation and aerodynamic flow visualization, and such mathematical techniques as potential equation methods for flow prediction and Reynolds-averaged Navier-Stokes computations of transonic flows. Also considered are transonic design using computational aerodynamics, the application of computation methods to transonic wing design, computational experience with advanced tactical aircraft, the evaluation of full potential flow methods, and the application of a shock-turbulent boundary layer interaction theory to transonic flowfield analysis.

Nixon, D.↗

NASA NTRS1982

The development and application of aerodynamic uncertainties in the design of the entry trajectory and flight control system of the Space Shuttle Orbiter

In connection with the decision to conduct with the Shuttle an orbital, manned mission on its first launch, certain problems arose related to mission safety, which had to be provided without the benefit of either a graduated flight test program or an initial unmanned flight concept. In an attempt to overcome these problems, the philosophy was adopted to provide a reasonable estimate of maximum possible errors in the preflight predicted aerodynamics. The flight control system (FCS) was to be certified on the basis of the estimated errors prior to STS-1. A set of 'worst case' aerodynamic uncertainties, defined as variations, was developed. As part of the first flight certification, variations, combined with other system uncertainties, were used to 'stress' the FCS through a multitude of simulations. Attention is given to an Orbiter description, the entry mission, the correlation of aerodynamic uncertainties, the application of aerodynamic variation in FCS and trajectory design, and the flight test results.

Gamble, J. D.↗