Search NASA⌕ Search

SEARCH · Search NASA

Results for “Atmosphere Processing Module”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Intelligent Memory Module Overcomes Harsh Environments

Solar cells, integrated circuits, and sensors are essential to manned and unmanned space flight and exploration, but such systems are highly susceptible to damage from radiation. Especially problematic, the Van Allen radiation belts encircle Earth in concentric radioactive tori at distances from about 6,300 to 38,000 km, though the inner radiation belt can dip as low as 700 km, posing a severe hazard to craft and humans leaving Earth s atmosphere. To avoid this radiation, the International Space Station and space shuttles orbit at altitudes between 275 and 460 km, below the belts range, and Apollo astronauts skirted the edge of the belts to minimize exposure, passing swiftly through thinner sections of the belts and thereby avoiding significant side effects. This radiation can, however, prove detrimental to improperly protected electronics on satellites that spend the majority of their service life in the harsh environment of the belts. Compact, high-performance electronics that can withstand extreme environmental and radiation stress are thus critical to future space missions. Increasing miniaturization of electronics addresses the need for lighter weight in launch payloads, as launch costs put weight at a premium. Likewise, improved memory technologies have reduced size, cost, mass, power demand, and system complexity, and improved high-bandwidth communication to meet the data volume needs of the next-generation high-resolution sensors. This very miniaturization, however, has exacerbated system susceptibility to radiation, as the charge of ions may meet or exceed that of circuitry, overwhelming the circuit and disrupting operation of a satellite. The Hubble Space Telescope, for example, must turn off its sensors when passing through intense radiation to maintain reliable operation. To address the need for improved data quality, additional capacity for raw and processed data, ever-increasing resolution, and radiation tolerance, NASA spurred the development of the Radiation Tolerant Intelligent Memory Stack (RTIMS).

Source record↗
NASA NTRSDate not supplied

Variability in Modelled Airborne Dust Mineralogy Derived from Global Soil Composition Uncertainties

Dust aerosols consist on a variety of minerals with different physic and chemical properties. As such, they interact with short and long wave radiation, potentially form clouds, act as nutrients modulating biogeochemical cycles, or influence atmospheric chemistry, differently. Most current state-of-the-art Earth System Models (ESMs) neglect the complexity in dust composition, mainly due to computational constraints, but also to the existing uncertainties in the size resolved composition of parent soils, the resulting distribution of minerals in airborne dust, and the scarcity of observations to constrain them. Within this work, we assess the variability of global dust composition due to uncertainties in the characterization of the parent soil mineralogy. To that end, we consider two available global soil mineralogy atlases, developed by Claquin et al. (1999) –C1999- and Journet et al. (2014) –J2014-, which represent respectively 8 and 12 relevant minerals for climate (namely: illite, smectite/montmorillonite, kaolinite, calcite, gypsum, hematite, quartz, and feldspars in C1999, and those plus chlorite, vermiculite, goethite, and mica in J2014). Thanks to a recently developed feature of the MONARCH atmospheric-chemistry model, we are able to explicitly resolve the minerals’ atmospheric cycle. Therefore, we define two global experiments to assess changes on airborne dust composition attributed to the soil mineralogy assumptions and provide a measure of their variability. We also perform a preliminary evaluation of the global mineralogy results against available observations of mineral fractions in surface dust concentration. Our results will inform the climate modelling community about the potential variability in dust composition, an aspect that will gain relevance as ESMs continue growing in complexity and new processes to better characterize aerosols’ forcing or biogeochemical cycles are added. Further observational constraints, such as those that will derive from the EMIT NASA mission on soil composition or the FRAGMENT experimental campaigns on airborne dust characterization, will be key in the near future to improve our understanding of the impact of dust mineralogy on fundamental climate features.

Dust aerosols↗
NASA NTRSDate not supplied

Assessing the feasibility of a spaceborne 3D lightning observing concept

The distribution of electrical charge in thunderclouds results from thermodynamic, microphysical, and kinematic processes, which also modulate thunderstorm evolution. It is no surprise that the connection between lightning and these physical processes is so strong that the increase and vertical growth of lightning activity closely follows the vertical growth of the thundercloud, but unraveling these connections is not trivial and requires observations of the three-dimensional (3D) structure of electrical activity in a cloud. Ground-based 3D lightning mapping networks give excellent 3D flash-level detail but are limited to regional coverage. Satellite-based optical lightning mappers give excellent global coverage but are largely limited to 2D summaries of flash rate and radiant intensity, albeit new flash products and stereographic techniques are chipping away this limitation. New observing strategies are needed to expand and diversify the corpus of 3D lightning datasets and motivate studies that unravel connections lightning has with these key physical processes and the surrounding environment. This study examines the feasibility of using a distributed network of orbing satellites with VHF-based lightning detectors to obtain global maps of 3D lightning activity and assess efficacy of this approach for use in a new, small satellite mission concept called CubeSpark. CubeSpark combines new VHF and high-resolution, bispectral optical instruments on a constellation of low-Earth orbiting (LEO) satellites to globally map the 3D electrical structure of thunderstorms and study how it relates to thunderstorm evolution, extreme weather, nitrogen oxide production and distribution, upper atmospheric electrical phenomena, and how 3D flash observations can complement existing satellite-based lightning mappers and improve decision support tools. To locate lightning discharges, CubeSpark seeks to use the VHF time-of-arrival technique, similar to ground-based total lightning mapping networks. The vertical location accuracy of these satellite retrievals will be of poorer quality compared to a ground-based network, which has non-trivial implications for lightning flash reconstruction and lightning-based interpretations of deep convection. We adapt a Lightning Mapping Array (LMA) simulation framework to an orbiting network and use it to address feasibility of 3D lightning detection from space with particular attention to location accuracy of VHF detections of lightning in the vertical. These simulations inform a constellation design study that defines a realistic orbital configuration and depicts the global coverage for CubeSpark. Results indicate that a 3D location accuracy of <1-2 km for each dimension can be achieved across 300-500 km wide swaths, which suggests that CubeSpark can resolve the charge structure of thunderclouds from the tropics to the mid- and high- latitudes.

Lightning↗
NASA NTRS2018

Imaging X-Ray Polarimetry Explorer (IXPE) Risk Management

The Imaging X-ray Polarimetry Explorer (IXPE) project is an international collaboration to build and fly a polarization sensitive X-ray observatory. The IXPE Observatory consists of the spacecraft and payload. The payload is composed of three X-ray telescopes, each consisting of a mirror module optical assembly and a polarization-sensitive X-ray detector assembly; a deployable boom maintains the focal length between the optical assemblies and the detectors. The goal of the IXPE Mission is to provide new information about the origins of cosmic X-rays and their interactions with matter and gravity as they travel through space. IXPE will do this by exploiting its unique capability to measure the polarization of X-rays emitted by cosmic sources. The collaboration for IXPE involves national and international partners during design, fabrication, assembly, integration, test, and operations. The full collaboration includes NASA Marshall Space Flight Center (MSFC), Ball Aerospace, the Italian Space Agency (ASI), the Italian Institute of Astrophysics and Space Planetology (IAPS)/Italian National Institute of Astrophysics (INAF), the Italian National Institute for Nuclear Physics (INFN), the University of Colorado (CU) Laboratory for Atmospheric and Space Physics (LASP), Stanford University, McGill University, and the Massachusetts Institute of Technology. The goal of this paper is to discuss risk management as it applies to the IXPE project. The full IXPE Team participates in risk management providing both unique challenges and advantages for project risk management. Risk management is being employed in all phases of the IXPE Project, but is particularly important during planning and initial execution-the current phase of the IXPE Project. The discussion will address IXPE risk strategies and responsibilities, along with the IXPE management process which includes risk identification, risk assessment, risk response, and risk monitoring, control, and reporting.

IXPE↗
NASA NTRS1991

Regolith-structure modeling

Early lunar missions have provided a basic understanding of the physical and strength properties of lunar regolith, which have been shown to differ from those of dry terrestrial granular soils. Lunar regolith is predominantly a fine sand of which nearly 40 percent can be characterized as silt with a particle size smaller than 100 micrometers. The top 10 to 20 cm of the regolith can be characterized as being in a loose to medium-loose state. The density of the regolith, however, rapidly increases below a depth of 20 cm. The highly irregular and angular shapes of the regolith particles tend to interlock and create relatively strong mechanical bonds that give the particulate mass substantial cohesive properties and smaller amounts of tensile strength properties. In addition, the friction angle of lunar regolith at medium to high densities is quite high and often exceeds 55 degrees. These known properties of lunar regolith have been matched in a terrestrially-manufactured analog known as Minnesota Lunar Simulant. A variety of experiments were conducted using this simulant to both verify existing information and generate new information on the physical and constitutive properties of lunar regolith. These experiments include maximum and minimum density determinations, specific mass of solids, grain-size distribution, conventional triaxial compression and extension, isotropic compression, one-dimensional compression, direct shear, and direct tension. Direct shear experiments were conducted under atmospheric and vacuum conditions. Results of the physical and strength experiments compare closely to results obtained from lunar missions. Results of simulant strength experiments performed in vacuum indicated no observable difference from results obtained in air. A test bed currently under study is one involving a regolith shield covering a first-generation human habitat module. It is understood that regolith in depths ranging from 3 to 5 meters is required for radiation shielding for habitation and workspace. The habitat module is treated as a rigid cylindrical tube with a smooth exterior. By making the cylinder rigid, a complex interaction problem is reduced to a situation where we can consider the support regolith and the shielding regolith as behaving independently of the structural properties of the cylindrical structure. Medium-dense lunar simulant was placed around a scaled model of the habitat module to provide a radiation shield. This embankment-type shield was constructed in relatively thin but fine layers by compacting, by mechanical vibratory means, layer upon layer of simulant placed adjacent to the horizontally-aligned cylinder. The slope angles were constructed at 55 degrees. The model described above was studied in a geotechnical centrifuge, which allows for the scaling of model dimensions to prototype dimensions by increasing the acceleration of gravity on the model. The deformation response can be scaled up to prototype dimensions to provide an assessment of the deformation patterns of the lunar structure. The actual process of local and/or global growth of instabilities or skip planes can also be observed.

Ko, Hon-Yim↗
NASA NTRS2023

Simulations of 7 Be and 10 Be with the GEOS-Chem global model v14.0.2 using state-of-the-art production rates

The cosmogenic radionuclides 7 Be and 10 Be are useful aerosol tracers for atmospheric transport studies. Combining 7 Be and 10 Be measurements with an atmospheric transport model can not only improve our understanding of the radionuclide transport and deposition processes but also provide an evaluation of the transport process in the model. To simulate these aerosol tracers, it is critical to evaluate the influence of radionuclides production uncertainties on simulations. Here we use the GEOS-Chem chemical transport model driven by the MERRA-2 reanalysis to simulate 7 Be and 10 Be with different production scenarios: the default production rate in GEOS-Chem based on an empirical approach (Lal and Peters, 1967; denoted as LP67), and two production rates from the CRAC:Be (Cosmic Ray Atmospheric Cascade: Beryllium; Poluianov et al., 2016) model considering only geomagnetic cut-off rigidities for a geocentric axial dipole (denoted as P16) or realistic spatial geomagnetic cut-off rigidity variations due to non-dipole moments of the geomagnetic field (denoted as P16spa). The model results are comprehensively evaluated with a large number of measurements including surface air concentrations and deposition fluxes. The model with the P16spa production can reproduce the absolute values and temporal variability of 7 Be and 10 Be surface concentrations and deposition fluxes on annual and sub-annual scales, as well as the vertical profiles of air concentrations. Simulations with the LP67 production tend to overestimate the absolute values of 7 Be and 10 Be concentrations. The P16 simulations suggest less than 10% differences compared to P16spa but tend to produce a significant positive bias (>20%) in the 7 Be deposition fluxes over East Asia. We find that the deposition fluxes are more sensitive to the production in the troposphere and downward transport from the stratosphere. Independent of the production models, surface air concentrations and deposition fluxes from all simulations show similar seasonal variations, suggesting a dominant meteorological influence. The model can also simulate reasonably the stratosphere-troposphere exchange process of 7 Be and 10 Be by producing stratospheric contribution and 10 Be/ 7 Be ratio values that agree with measurements. Finally, we illustrate the importance of including the time-varying solar modulation in the production calculation, which can significantly improve the agreement between model results and measurements, especially at mid- and high- latitudes. Reduced uncertainties in the production rates, as demonstrated in this study, improve the utility of 7 Be and 10 Be as aerosol tracers for evaluating and testing transport and scavenging processes in global models.

Minjie Zheng↗
NASA NTRS2023

Convective Impact on the Global Lower Stratospheric Water Vapor Budget

Water vapor in the stratosphere is primarily controlled by temperatures in the tropical upper troposphere and lower stratosphere. However, the direct impact of deep convection on the global lower stratospheric water vapor budget is still an actively debated issue. Two complementary modeling approaches are used to investigate the convective impact in boreal winter and summer. Convective influence is diagnosed by tracing trajectories through convective cloud top altitude fields derived from global rainfall and brightness temperature data. Backward trajectory model simulations coupled with a detailed treatment of cloud microphysical processes indicate that convection moistens the global lower stratosphere by approximately 0.3 ppmv in boreal winter and summer 2010. The diurnal peak in convection is responsible for about half of the total convective moistening during winter and nearly all of the convective moistening during summer. Deep convective clouds overshooting the tropopause have relatively minor effect on global lower stratospheric water vapor. A forward trajectory model coupled with a simplified cloud module is used to estimate the relative magnitude of the interannual variability of the convective impact. Combining the results from the two models, we find that the convective impact on the global lower stratospheric water vapor during 2006-2016 is approximately 0.3 ppmv with year-to-year variations of up to 0.1 ppmv. An important mechanism of convective hydration of the lower stratosphere is via the detrainment of saturated air and ice into the tropical uppermost troposphere and the subsequent upward transport of some of these moist air parcels across relatively warm and subsaturated tropopause.

CONVECTION↗
NASA NTRS2015

Aerosol Correction for Improving OMPS/LP Ozone Retrieval

The Ozone Mapping and Profiler Suite Limb Profiler (OMPS-LP) on board the Suomi National Polar-orbiting Partnership (SNPP) satellite was launched on Oct. 28, 2011. Limb profilers measures the radiance scattered from the Earth's atmospheric in limb viewing mode from 290 to 1000 nm and infer ozone profiles from tropopause to 60 km. The recently released OMPS-LP Version 2 data product contains the first publicly released ozone profiles retrievals, and these are now available for the entire OMPS mission, which extends from April, 2012. The Version 2 data product retrievals incorporate several important improvements to the algorithm. One of the primary changes is to turn off the aerosol retrieval module. The aerosol profiles retrieved inside the ozone code was not helping the ozone retrieval and was adding noise and other artifacts. Aerosols including polar stratospheric cloud (PSC) and polar mesospheric clouds (PMC) have a detectable effect on OMPS-LP data. Our results show that ignoring the aerosol contribution would produce an ozone density bias of up to 10 percent in the region of maximum aerosol extinction. Therefore, aerosol correction is needed to improve the quality of the retrieved ozone concentration profile. We provide Aerosol Scattering Index (ASI) for detecting aerosols-PMC-PSC, defined as ln(Im-Ic) normalized at 45km, where Im is the measured radiance and Ic is the calculated radiance assuming no aerosols. Since ASI varies with wavelengths, latitude and altitude, we can start by assuming no aerosol profiles in calculating the ASIs and then use the aerosol profile to see if it significantly reduces the residuals. We also discuss the effect of aerosol size distribution on the ozone profile retrieval process. Finally, we present an aerosol-PMC-PSC correction scheme.

OMPS/LP↗
NASA NTRS1985

Volatiles on satellites of the outer solar system

Molecules of cosmochemically abundant elements can act as volatiles and hence play a dominant role in the climatic and surficial evolution of solid bodies. Examples on terrestrial planets are H2O on Earth and H2O and CO2 on Mars. Analogous processes in the outer solar system focussing on CH4, its associated hydrocarbons, and N2 on Titan and Triton, the large moons of Saturn and Neptune were explored. A kilometer-deep C2H6-CH4 ocean was proposed for the surface of Titan to reconcile data on the lower atmosphere with understanding of the photochemical conversion of methane to heavier hydrocarbons. If such ocean exists, then it has dissolved in it an amount of N2 equal to the present atmospheric abundance. Since N2 contributes with CH4 a substantial greenhouse effect, the atmospheric physical and chemical characteristics are strongly coupled to those of the ocean, which change with time as methane is photolyzed in the stratosphere. Some relationship exists to the runaway greenhouse model for primordial Venus and the possible climatic implications of the buffering of Earth's atmospheric CO2 by the oceans. Two important diagnostics, measurable in Titan's atmosphere, of the conditions under which icy satellites formed are the abundances of noble gases and the CHd/CH4 radio. Both of these indicators have been altered during the evolution of Titan's surface-atmosphere system, the former by interaction with the ocean and the latter by progressive photolysis of methane into heavier hydrocarbons. The physical state and composition of volatiles on the surface of Triton is controversial, but plausibly could include CH4 N2 and perhaps CO. If condensed CH4 and N2 are widespread, their transformation to and from the vapor phase dominates the surface energy balance with sunlight. The extreme seasonal modulation of subsolar latitude on Triton is thus primarily expressed by volatile transport rather than large teperature changes, with possibly drastic observational consequences. The presence of two volatile species differing greatly in their vapor pressures make Triton a crude analog of Mars. Triton might be more appropriately regarded as a deep-freeze version of Titan.

Lunine, J. I.↗
NASA NTRS2007

Modeling the Observed Solar Cycle Variations of the Quasi-biennial Oscillation (QBO): Amplification by Wave Forcing

In several papers, the solar cycle (SC) effect in the lower atmosphere has been linked observationally to the Quasi-biennial Oscillation (QBO) of the zonal circulation, which is generated primarily by small-scale gravity waves (GW). Salby and Callaghan (2000) in particular analyzed the QBO, covering more than 40 years, and discovered that it contains a large SC signature at 20 km. With our Numerical Spectral Model (NSM), we conducted a 3D study to describe the QBO under the influence of the SC, and some results have been published (Mayr et al., GRL, 2005,2006). For a SC period of 10 years, the relative amplitude of radiative forcing is taken to vary exponentially with height, i.e., 0.2% at the surface, 2% at 50 km, 20% at 100 km and above. Applying spectral analysis to filter out and identify the SC signature, the model generates a relatively large modulation of the QBO, which reproduces the observations qualitatively. Our numerical results demonstrate that the modulation of the QBO, with constant phase relative to the SC, persist at least for 60 years. The same model run generates in the seasonal variations a hemispherically symmetric Equatorial Annual Oscillation (EAO, with 12-month period), which is confined to low latitudes like the QBO and is also modulated by the SC. Although the amplitude of the EAO is relatively small, its SC modulation is large, and it is in phase with that of the QBO. The SC modulated EAO is evidently the pathway and pacemaker for the solar influence on the QBO. To shed light on the dynamical processes involved, we present model results that show how the seasonal cycle induces the SC modulations of the EAO and QBO. Our analysis further demonstrates that the SC modulations of the QBO and EAO are amplified by the GW interaction with the flow. The GW momentum source clearly shows a SC modulation that is in phase with the corresponding modulations of the QBO and EAO. By tapping the momentum from the upward propagating GWs, the QBO and EAO apparently serve as conduits to amplify and transfer to lower altitudes the larger SC variations in the UV absorbed in the mesosphere. Our model also produces in the temperature variations of the QBO and EAO measurable SC modulations at polar latitudes near the tropopause, and such signatures have been reported in the literature. Contrary to conventional interpretation, however, we suggest that the effects are generated at least in part by the meridional circulation, and planetary waves presumably, which redistribute the energy from the equatorial region where wave forcing is very efficient and thereby amplifies the SC influence.

Mayr, Hans G.↗
NASA NTRSDate not supplied

Improved Characterization of PSC Processes Derived from a Third-Generation CALIOP and MLS Detection and Composition Classification Algorithm

The new 3-year CloudSat and CALIPSO Science Team project described in this poster will use a unique combination of data from the Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) instrument on CALIPSO and the Microwave Limb Sounder (MLS) on Aura, in conjunction with supporting meteorological information and detailed modeling studies, to advance our understanding of polar stratospheric cloud (PSC) processes and their role in ozone depletion. We will develop a third-generation (Gen3) PSC detection and composition algorithm that incorporates a new, more robust two-dimensional, multi-channel CALIOP feature detection scheme (2D-McDA). We will also devise and implement an improved two-dimensional PSC composition classification scheme that utilizes multiple parameters (e.g., CALIOP 532-nm parallel and perpendicular scattering ratios, CALIOP 1064-nm total scattering ratio, MLS HNO3 and H2O, ambient temperature, and temperature histories) in a Bayesian approach to determine the most likely PSC composition and help constrain solid PSC particle number density and size/shape. The combined CALIOP/MLS analyses will allow us to study in detail the full life cycle of PSCs and their resulting impact on gas-phase HNO3 and H2O, which should lead to improved parameterizations of PSC microphysics in global CCMs where detailed particle information is not available. The Gen3 CALIOP PSC algorithm will be a natural stepping-stone toward the analysis of data collected during future spaceborne lidar missions, such as NASA’s Atmosphere Observation System (AtmOS) mission currently scheduled for launch late in this decade. We will also investigate possible trends in PSC occurrence and composition over the entire CALIOP data record and through further comparisons with the Stratospheric Aerosol Measurement (SAM) II solar occultation PSC record from 1979-1989. Finally, we will validate the mountain-wave parameterization and PSC schemes used in the UM-UKCA (Unified Model coupled to the United Kingdom Chemistry and Aerosol module) chemistry-climate model through detailed comparisons with earlier CALIOP PSC data products and those developed under this proposal.

CALIPSO↗
NASA NTRS1995

A versatile system for processing geostationary satellite data with run-time visualization capability

To better predict global climate change, scientists are developing climate models that require interdisciplinary and collaborative efforts in their building. We are currently involved in several such projects but will briefly discuss activities in support of two such complementary projects: the Atmospheric Radiation Measurement (ARM) program of the Department of Energy and Sequoia 2000, a joint venture of the University of California, the private sector, and government agencies. Our contribution to the ARM program is to investigate the role of clouds on the top of the atmosphere and on surface radiance fields through the data analysis of surface and satellite observations and complex modeling of the interaction of radiation with clouds. One of our first ARM research activities involves the computation of the broadband shortwave surface irradiance from satellite observations. Geostationary satellite images centered over the first ARM observation site are received hourly over the Internet network and processed in real time to compute hourly and daily composite shortwave irradiance fields. The images and the results are transferred via a high-speed network to the Sequoia 2000 storage facility in Berkeley, where they are archived These satellite-derived results are compared with the surface observations to evaluate the accuracy of the satellite estimate and the spatial representation of the surface observations. In developing the software involved in calculating the surface shortwave irradiance, we have produced an environment whereby we can easily modify and monitor the data processing as required. Through the principles of modular programming, we have developed software that is easily modified as new algorithms for computation are developed or input data availability changes. In addition, the software was designed so that it could be run from an interactive, icon-driven, graphical interface, TCL-TK, developed by Sequoia 2000 participants. In this way, the data flow can be interactively assessed and altered as needed. In this environment, the intermediate data processing 'images' can be viewed, enabling the investigator to easily monitor the various data processing steps as they progress. Additionally, this environment allows the rapid testing of new processing modules and allows their effects to be visually compared with previous results.

Landsfeld, M.↗
NASA NTRS1961

Development of Ceramic Fibers for Reinforcement in Composite Materials

Refinements of the vertical arc fiberizing apparatus resulted in its ability to fiberize very different refractory glasses having wide ranges of properties. Although the apparatus, was originally designed as a laboratory research tool for the evaluation of many compositions daily, up to one quarter pound of fibers of a single composition could be produced in an 8-hour day. Fibers up to six and a half feet long were produced with the apparatus. Studies were conducted of two methods of fiberizing refractory glasses requiring rapid freezing from the melt. The first method consisted of fiberizing droplets of molten glass passing through an annular nozzle. The second method consisted of reconstructing the annular nozzle in. the shape of a horseshoe to achieve a shorter delay in blasting a molten droplet from the tip of a rod. Both methods were judged feasible for producing fibers of glasses requiring rapid freezing. The first method would be more amenable to volume fiber production. Studies of induction heating for fiber formation did not lead to its designation as a very efficient heating method. Problems. remain to be solved, in the design of a suitable susceptor for a higher heating rate, in protecting the susceptor from oxidation with an inert gas, in contamination of the melt from a refractory crucible, and in the protective radiation shielding of the induction concentrator coil. It is not considered practical to continue studies of this heating method. In the course of this program 151 refractory glass compositions were evaluated for fiber, forming characteristics. Of the various types of materials studied, the following showed promise in producing acceptable refractory fibers: sIlica- spinel (magnesium aluminate), silica- spinel-zirconia, silica-zirconia, silica-zinc spinel, aluminum phosphate glasses, and fluoride glasses. Compositions which did not produce acceptable fibers were high zirconia materials, barium spinels, and calcium aluminates. Improvements in the. testing apparatus for single fiber tensile strength increased the precision. of tests conducted on nine fibers. The highest mean tensile strength, a value of 295,000 pounds per square inch, was obtained with R-141 fibers. Treatment of R-74 fibers with anhydrous Linde A-1100 silane finish improved its mean fiber tensile strength by 25 percent. The lapse of time after fiber formation had no measurable effect on tensile strength. A static heating test conducted with various high melting fibers indicated that Fiberfrax and R-108 underwent no significant changes in bulk volume or resiliency on exposure to 2750 degrees Fahrenheit (1510 degrees Centigrade) in an oxidizing atmosphere. For fiber-resin composition fabrication, ten fiber materials were selected on the bases of high fiber yield, fusion temperature, and type of composition. Fiberfrax, a commercial ceramic fiber, was included for comparison. A new, more effective method of removing pellets from blown fibers was developed. The de-pelletized fibers were treated with a silane finish and felted into ten-inch diameter felts prior to resin impregnation. Composites containing 30 percent by weight of CTL 91-LD phenolic resin were molded under high pressure from the impregnated felts and post-cured to achieve optimum properties. Flexural strength, flexural modules of elasticity, and punch shear strength tests were conducted on the composite specimens. The highest average flexural strength obtained was 19,958 pounds per square inch with the R-74-fiber-resin composite. This compares very favorably with the military specification of 13,000 pounds per square inch flexural strength for randomly oriented fiber reinforced composites. The highest punch shear strength (11,509 pounds per square inch) was obtained with the R-89 fiber-resin composite. The effects of anhydrous fiber finishes on composite strength were not clearly indicated. Plasma arc tests at a heat flux of 550 British Thermal Units per square foot per second on eight composite materials indicated ablation rates generally equivalent to Fiberglas-Micarta No. 259-2. The composite reinforced with R-99 fibers had an average ablation rate of 0.008 inch per second and appears quite promising on the basis of these tests. Preliminary studies for processing fibers into yarn and fabric were conducted with R-99 fibers. The use of certain organic gums aided in 2 fabricating by hand several relatively strong yarns and a crude fabric swatch. This indicated the practicality of developing techniques for processing these fibers into yarn and fabric without significant damage to the fibers.

Gates, L. E.↗
NASA NTRSDate not supplied

Improved Characterization of PSC Processes Derived from a Third-Generation CALIOP and MLS Detection and Composition Classification Algorithm

The new 3-year CloudSat and CALIPSO Science Team project described in this poster will use a unique combination of data from the Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) instrument on CALIPSO and the Microwave Limb Sounder (MLS) on Aura, in conjunction with supporting meteorological information and detailed modeling studies, to advance our understanding of polar stratospheric cloud (PSC) processes and their role in ozone depletion. We will develop a third-generation (Gen3) PSC detection and composition algorithm that incorporates a new, more robust two-dimensional, multi-channel CALIOP feature detection scheme (2D-McDA). We will also devise and implement an improved two-dimensional PSC composition classification scheme that utilizes multiple parameters (e.g., CALIOP 532-nm parallel and perpendicular scattering ratios, CALIOP 1064-nm total scattering ratio, MLS HNO3 and H2O, ambient temperature, and temperature histories) in a Bayesian approach to determine the most likely PSC composition and help constrain solid PSC particle number density and size/shape. The combined CALIOP/MLS analyses will allow us to study in detail the full life cycle of PSCs and their resulting impact on gas-phase HNO3 and H2O, which should lead to improved parameterizations of PSC microphysics in global chemistry-climate models (CCMs) where detailed particle information is not available. The Gen3 CALIOP PSC algorithm will be a natural stepping-stone toward the analysis of data collected during future spaceborne lidar missions, such as NASA’s Atmosphere Observation System (AOS) mission currently scheduled for launch late in this decade. We will also investigate possible trends in PSC occurrence and composition over the entire CALIOP data record and through further comparisons with the Stratospheric Aerosol Measurement (SAM) II solar occultation PSC record from 1979-1989. Finally, we will validate the mountain-wave parameterization and PSC schemes used in the UM-UKCA (Unified Model coupled to the United Kingdom Chemistry and Aerosol module) CCM through detailed comparisons with earlier CALIOP PSC data products and those developed under this proposal.

CALIPSO↗
NASA NTRS2015

Lidar Observations of Atmospheric CO2 Column During 2014 Summer Flight Campaigns

Advanced knowledge in atmospheric CO2 is critical in reducing large uncertainties in predictions of the Earth' future climate. Thus, Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) from space was recommended by the U.S. National Research Council to NASA. As part of the preparation for the ASCENDS mission, NASA Langley Research Center (LaRC) and Exelis, Inc. have been collaborating in development and demonstration of the Intensity-Modulated Continuous-Wave (IM-CW) lidar approach for measuring atmospheric CO2 column from space. Airborne laser absorption lidars such as the Multi-Functional Fiber Laser Lidar (MFLL) and ASCENDS CarbonHawk Experiment Simulator (ACES) operating in the 1.57 micron CO2 absorption band have been developed and tested to obtain precise atmospheric CO2 column measurements using integrated path differential absorption technique and to evaluate the potential of the space ASCENDS mission. This presentation reports the results of our lidar atmospheric CO2 column measurements from 2014 summer flight campaign. Analysis shows that for the 27 Aug OCO-2 under flight over northern California forest regions, significant variations of CO2 column approximately 2 ppm) in the lower troposphere have been observed, which may be a challenge for space measurements owing to complicated topographic condition, heterogeneity of surface reflection and difference in vegetation evapotranspiration. Compared to the observed 2011 summer CO2 drawdown (about 8 ppm) over mid-west, 2014 summer drawdown in the same region measured was much weak (approximately 3 ppm). The observed drawdown difference could be the results of the changes in both meteorological states and the phases of growing seasons. Individual lidar CO2 column measurements of 0.1-s integration were within 1-2 ppm of the CO2 estimates obtained from on-board in-situ sensors. For weak surface reflection conditions such as ocean surfaces, the 1- s integrated signal-to-noise ratio (SNR) of lidar measurements at 11 km altitude reached 376, which was equivalent to a 10-s CO2 error 0.33 ppm. For the entire processed 2014 summer flight campaign data, the mean differences between lidar remote sensed and in-situ estimated CO2 values were about -0.013 ppm. These results indicate that current laser absorption lidar approach could meet space measurement requirements for CO2 science goals.

Lin, Bing↗
NASA NTRS2000

A Novel High Efficient Laser Transmitter Design for a Space-borne Ozone Differential Lidar (DIAL)

Development of a UV laser transmitter capable of operating from a space platform is a critical step in enabling global earth observations of aerosols and ozone at resolutions greater than current passive instrument capabilities. Tropospheric chemistry is well recognized as the next frontier for global atmospheric measurement. NASA Langley Research Center (LaRC) and the Canadian Space Agency (CSA) have jointly studied the requirements for a satellite based, global ozone monitoring instrument. The study, called Ozone Research using Advanced Cooperative Lidar Experiment (ORACLE) has defined the Differential Absorption Lidar (DIAL) instrument performance, weight and power, and configuration requirements for a space based measurement. In order to achieve the measurement resolution and acceptable signal-to-noise from lidar returns, 500mJ/pulse (5 Watts average power) is required at both 305-308nm and 315-320nm wavelengths. These are consecutive pulses, in a 10 Hz, double-pulsed format. The two wavelengths are used as the on- and off-lines for the ozone DIAL measurement. NASA Langley is currently developing technology for a UV laser transmitter capable of meeting the ORACLE requirements. Experimental efforts to date have shown that the UV generation scheme is viable, and that energies greater than l00mJ/pulse are possible. In this paper, we will briefly discuss the down select process for the proposed laser design, the study effort to date and the laser system design, including both primary and alternate approaches. We will describe UV laser technology that minimizes the total number of optical components (for enhanced reliability) as well as the number of UV coated optics required to transmit the light from the laser (for enhanced optical damage resistance). While the goal is to develop a laser that will produce 500 mJ of energy, we will describe an optional design that will produce output energies between 100 - 200 mJ/unit and techniques for combining multiple laser modules in order to transmit a minimum of 500mJ of UV energy in each pulse of the on- and off-line pulse pairs. This modular laser approach provides redundancy and significantly reduces development time, risk and cost when compared to the development of a single, 500mJ double-pulsed laser subsystem. Finally, we will summarize the laser development effort to date, including results that include the highest known UV energy ( 130 mJ at 320nm) ever produced by a solid-state laser operating in this wavelength region.

Edwards, W. C.↗
NASA NTRS2005

Lunar and Planetary Science XXXVI, Part 20

The topics include: 1) Virtual Reality Technology as a Tool to Enhance Collaboration Between Space Exploration and Public Outreach: The Case Using the Mars Exploration Rover Images; 2) Atmospheric Electron-induced X-Ray Spectrometer (AEXS) Instrument Development; 3) Impact of Low Thermal Conductivity Layers on the Bulk Conductivity of a Martian Crustal Column; 4) Impacting Classroom Teachers Through Long-Term Professional Development; 5) Oxygen, Ca, and Ti Isotopic Compositions of Hibonite-bearing Inclusions; 6) Phenomenological Excitation Functions of Xe Isotopes with Protons on Nuclei of Cs, La and Ce; 7) Double-Diffusive Convection and Other Modes of Salinity-modulated Heat and Material Transport in Europa s Ocean; 8) Slope Morphologies of the Hellas Mensae Constructs, Eastern Hellas Planitia, Mars; 9) Development of Polygonal Thermal Contraction Patterns in a South Polar Trough, Mars 3 Years of Observations; 10) Martian Relevance of Dehydration and Rehydration in the Mg-Sulfate System; 11) Formation of Martian Volcanic Provinces by Lower Mantle Flushing? 12) Can Glasses Help Us to Unravel the Origin of Barred Olivine Chondrules? 13) Loki Patera: A Magma Sea Story; 14) Compositions of Partly Altered Olivine and Replacement Serpentine in the CM2 Chondrite QUE93005; 15) Model of Light Scattering by Lunar Regolith at Moderate Phase Angles: New Results; 16) Radiation Resistance of a Silicone Polymer Grease Based Regolith Collector for the HERA Near-Earth Asteroid Sample Return Mission; 17) Analysis of the Tectonic Lineaments in the Ganiki Planitia (V14) Quadrangle, Venus; 18) Nanometer-sized Diamonds from AGB Stars; 19) Quantifying Exact Motions Along Lineaments on Europa; 20) Geometry of Thrust Faults Beneath Amenthes Rupes, Mars; 21) Mapping of the Physical Characteristics and Mineral Composition of a Superficial Layer of the Moon or Mars and Ultra-Violet Polarimetry from the Orbital Station; 22) Negative Searches for Evidence of Aqueous Alteration on Asteroid Surfaces; 23) What Processes Have Shaped Basalt Boulders on Earth and Mars? Studies of Feature Persistence Using Facet Mapping and Fractal Analysis; 24) The Popigai Fluidizites: Dense Water Inclusions in Lechatelierite; Evidence for Shock-generated Carbonate and Hydrous Silicate Melts; 25) Missing Xenon Problem and Climate of the Early Earth; and 26) More on Magnetic Spectra from Correlated Crustal Sources on Mars

Source record↗
NASA NTRS2018

Prediction Skill of the MJO Teleconnection Signals in the NASA GEOS Subseasonal Reforecasts

Tropical-extratropical teleconnections are considered key to advancing subseasonal prediction. The Madden Julian oscillation (MJO), characterized by large scale convective envelopes propagating along the tropical Indo-Pacific sector, is known to modulate midlatitude circulation and associated weather patterns. Although there is a general consensus on the MJO's influence on the midlatitude circulation, which is thought to be due to modulations of the North Atlantic Oscillation (NAO) and the Pacific North America (PNA) pattern, relatively less is known about the predictability of these teleconnection signals in dynamical forecast models. The composite evolution of the midlatitude circulation anomalies and associated wave train structure as the delayed response to tropical heating are reported in many studies that have examined reanalyses and long model simulations. However, it is yet to be determined whether they lend any beneficial subseasonal forecast skill, especially to weekly mean surface temperature and precipitation over North America. Investigating useful predictable signals from the MJO teleconnections is also complicated by the fact that the MJO is a moving heat source with an approximate periodicity of 30-60 days, and that the structure and amplitude of the midlatitude response can be sensitive to the longitudinal positioning of the heating anomaly as well as the propagation speed of the MJO. The objective of this study is to investigate the impact of MJO teleconnections on forecast accuracy at 2-3 week lead over North America, with an emphasis on the above-mentioned lesser known aspects of these teleconnections. To this end, we utilize a suite of subseasonal reforecasts performed with the latest NASA GEOS-5 seasonal-to-subseasonal (S2S) system. These reforecasts were performed as part of the NOAA SubX project, wherein the NASA GEOS-5 atmosphere-ocean coupled model was run at degree horizontal resolution, initialized every 5 days for the period 1999-2016. The GEOS-5 model shows skillful predictions of the MJO, with the correlation coefficient based on the real-time multivariate MJO (RMM) index staying at or above 0.5 up to forecast lead 26-36 days. The system is thus a useful tool for investigating MJO teleconnection processes.

Achuthavarier, Deepthi↗