SEARCH · Search NASA

Results for “Atomic Resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Changes in interstellar atomic abundances from the galactic plane to the halo

A few, specially selected interstellar absorption lines were measured in the high resolution, far ultraviolet spectra of 200 O and B type stars observed by the International Ultraviolet Explorer (IUE). For lines of sight extending beyond about 500 pc from the galactic plane, the abundance of singly ionized iron atoms increases relative to singly ionized sulfur. However, the relative abundances of singly ionized sulfur, silicon and aluminum do not seem to change appreciably. An explanation for the apparent increase of iron is the partial sputtering of material off the surfaces of dust grains by interstellar shocks. Another possibility might be that the ejecta from type I supernovae enrich the low density medium in the halo with iron.

Jenkins, E. B.↗

NASA NTRS1983

Changes in interstellar atomic abundances from the galactic plane to the halo

Jenkins, E. B.↗

NASA NTRS1992

X-Ray Microanalysis and Electron Energy Loss Spectrometry in the Analytical Electron Microscope: Review and Future Directions

This paper reviews and discusses future directions in analytical electron microscopy for microchemical analysis using X-ray and Electron Energy Loss Spectroscopy (EELS). The technique of X-ray microanalysis, using the ratio method and k(sub AB) factors, is outlined. The X-ray absorption correction is the major barrier to the objective of obtaining I% accuracy and precision in analysis. Spatial resolution and Minimum Detectability Limits (MDL) are considered with present limitations of spatial resolution in the 2 to 3 microns range and of MDL in the 0.1 to 0.2 wt. % range when a Field Emission Gun (FEG) system is used. Future directions of X-ray analysis include improvement in X-ray spatial resolution to the I to 2 microns range and MDL as low as 0.01 wt. %. With these improvements the detection of single atoms in the analysis volume will be possible. Other future improvements include the use of clean room techniques for thin specimen preparation, quantification available at the I% accuracy and precision level with light element analysis quantification available at better than the 10% accuracy and precision level, the incorporation of a compact wavelength dispersive spectrometer to improve X-ray spectral resolution, light element analysis and MDL, and instrument improvements including source stability, on-line probe current measurements, stage stability, and computerized stage control. The paper reviews the EELS technique, recognizing that it has been slow to develop and still remains firmly in research laboratories rather than in applications laboratories. Consideration of microanalysis with core-loss edges is given along with a discussion of the limitations such as specimen thickness. Spatial resolution and MDL are considered, recognizing that single atom detection is already possible. Plasmon loss analysis is discussed as well as fine structure analysis. New techniques for energy-loss imaging are also summarized. Future directions in the EELS technique will be the development of new spectrometers and improvements in thin specimen preparation. The microanalysis technique needs to be simplified and software developed so that the EELS technique approaches the relative simplicity of the X-ray technique. Finally, one can expect major improvements in EELS imaging as data storage and processing improvements occur.

Goldstein, J. I.↗

NASA NTRS2021

Utilizing local phase transformation strengthening for nickel-based superalloys

Almost 75 years of research has been devoted to producing superalloys capable of higher operating temperatures in jet turbine engines, and there is an ongoing need to increase operating temperature further. Here, a new disk Nickel-base superalloy is designed to take advantage of strengthening atomic-scale dynamic complexions. This local phase transformation strengthening provides the alloy with a three times improvement in creep strength over similar disk superalloys and comparable strength to a single crystal blade alloy at 760 °C. Ultra-high-resolution chemical mapping reveals that the improvement in creep strength is a result of atomic-scale η (D024) and χ (D019) formation along superlattice stacking faults. To understand these results, the energy differences between the L12 and competing D024 and D019 stacking fault structures and their dependence on composition are computed by density functional theory. This study can help guide researchers to further optimize local phase transformation strengthening mechanisms for alloy development.

Timothy M. Smith↗

NASA NTRS1993

Detection of boron, cobalt, and other weak interstellar lines toward Zeta Ophiuchi

Numerous weak lines from interstellar atomic species toward Zeta Ophiuchi were observed with the Goddard High-Resolution Spectrograph. Of particular note are the first interstellar detection of cobalt and the detection of boron in this sight line. These measurements provide estimates for the amount of depletion for the two elements. Boron, a volatile, and cobalt, a refractory element, display the depletion pattern found by Savage et al. (1992). The abundance of phosphorus in the H II region associated with the star was obtained from a detection of P III. Additional weak lines from S I, C I, Ni II, and Cu II were detected for the first time; these lines provide the basis for refinements in oscillator strength and column density. Analysis of the neutral sulfur data indicates that the atomic gas is more widely distributed than the molecular material in the main component.

Federman, S. R.↗

DOE OSTI2026

High-Resolution Laser Spectroscopy on the Hyperfine Structure of 255Fm (𝑍=100)

We report on high-resolution laser spectroscopy of 255Fm (𝑇1/2=20 h), one of the heaviest nuclides available from reactor breeding. The hyperfine structures in two different atomic ground-state transitions at 398.4 nm and 398.2 nm were probed by in-source laser spectroscopy at the RISIKO mass separator in Mainz, using the perpendicularly illuminated laser ion source and trap (PI-LIST) high-resolution ion source. Experimental results were combined with hyperfine fields from various atomic ab initio calculations, in particular using multiconfiguration Dirac-Hartree-Fock theory, as implemented in grasp18. In this manner, the nuclear magnetic dipole and electric quadrupole moments were derived to be 𝜇=−0.75⁢(5) 𝜇N and 𝑄s=+5.84⁢(13) eb, respectively. The magnetic moment indicates occupation of the 𝜈⁢7/2⁢[613] Nilsson orbital, while the large quadrupole moment confirms strong, stable prolate deformation consistent with systematics in the heavy actinides. Comparisons with available expectation values from nuclear theory show good agreement, providing a stringent benchmark for the used theoretical models. These results revise earlier data and establish 255Fm as a reference isotope for future high-resolution studies.

Ezold, Julie [ORNL] (ORCID:0000000250550022)↗

DOE OSTI2024

Synthesis, Processing, and Use of Isotopically Enriched Epitaxial Oxide Thin Films

Isotopic engineering has emerged as a key approach to study the nucleation, diffusion, phase transitions, and reactions of materials at an atomic level. It aims to uncover mass transport pathways, kinetics, and operational and failure mechanisms of functional materials and devices. Understanding these phenomena leads to deeper insights into important physical processes, such as the transport of ions in energy conversion and storage devices and the role of active sites and supports during heterogeneous catalytic reactions. Likewise, isotopic engineering is being pursued as a means of modifying functionality to enable future technological applications. In this Account, we summarize our recent work employing isotope labeling (e.g., 18 O 2 and 57 Fe) during thin film synthesis and postgrowth processing to reveal growth mechanisms, defect chemistry, and elemental diffusion under working and extreme conditions. Isotope-resolved analysis techniques with nanometer-scale spatial resolution, such as time-of-flight secondary ion mass spectrometry and atom probe tomography, facilitate the accurate quantification of isotopic placement and concentration in our well-defined heterostructures with precisely positioned, isotope-enriched layers. By measuring the nanometer-scale redistribution between natural abundance and isotopically enriched oxygen layers during the deposition of Fe 2 O 3 and Cr 2 O 3 by molecular beam epitaxy, we identified intermixing processes driven by surface adatoms occurring both at the film growth surface and within the first few layers below the surface. Further insights into synthesis mechanisms were gained by studying the tungsten oxide thin films grown by evaporating WO 3 powder in the presence of background 18 O 2 , revealing minimal incorporation of background oxygen during the film formation process. Thermal and radiation-enhanced diffusion in epitaxial Fe and Cr oxides were precisely tracked using 18 O and 57 Fe tracer layers incorporated into model epitaxial oxide thin films. This approach has allowed us to access thermal diffusion behavior at lower temperatures than previously measured, revealing a potential changeover in diffusion mechanism. Understanding radiation-enhanced diffusion in model oxides that represent the surface layers on the structural components of nuclear reactors informs our understanding of their corrosion behavior under irradiation. Isotopic labeling can also provide unique insights into the surface exchange reactions and defect chemistry of electrocatalysts. For instance, tracking the change in 18 O concentration at the surface of an epitaxial LaNiO 3 thin film after the electrocatalytic oxygen evolution reaction revealed the participation of lattice oxygen, confirming a hypothesis that had been proposed previously. Lastly, we highlight a new direction wherein we perform in situ processing studies utilizing isotopic tracers in conjunction with model epitaxial thin films within the atom probe tomography instrument. Additionally, this Account illustrates the great potential of isotopic engineering to enable fundamental mechanistic insights into physical processes and engineer functional properties in epitaxial films, heterostructures, and superlattices.

36 MATERIALS SCIENCE↗

NASA NTRS1994

Atomic and molecular gas in interstellar cirrus clouds

The dust, atomic gas, and molecular gas content of a sample of 26 of isolated, degree-sized infrared clouds are compared. Half of the clouds have an infrared excess indicating the presence of H2, and 14 contain compact CO-emitting regions. Complete, high angular resolution H I and CO maps of one cloud, G236+39, resolve the transition between atomic and molecular H, as well as the location of CO formation. Assuming the infrared emission traces the total column density, H2 is inferred to be much more widely distributed than the CO. The CO rotational levels are subthermally excited, and the (2 - 1)/(1 - 0) line ratios suggest a density n(H2) approximately 200/cm(exp 3) where CO was detected. A model of H2 formation on grain surfaces balanced by self-shielded photodissociation fits the variation of infrared brightness with H I column density. Assuming a temperature of 80 K, typical of diffuse H2 (Savage et al. 1977), the H2 chemistry requires an average density n(H + 2H2) approximately 50/cm(exp 3). For G236+39, if the distance is 100 pc, the H I and H2 masses are estimated to be 90 and 70 solar mass, respectively. High-resolution H I and infrared maps of a smaller cloud, G249.0+73.7, reveal no evidence for molecular gas, which is likely due to the low total column density through this cloud. These results suggest the H2 and H I content are comparable for some interstellar cirrus clouds with column densities N(H I) greater than 4 x 10(exp 20)/cm(exp 2), even where CO was not detected.

Reach, William T.↗

NASA NTRS1983

Studies on lasers and laser devices

The goal of this grant was to study lasers, laser devices, and uses of lasers for investigating physical phenomena are studied. The active projects included the development of a tunable, narrowband XUV light source and its application to the spectroscopy of core excited atomic states, and the development of a technique for picosecond time resolution spectroscopy of fast photophysical processes.

Harris, S. E.↗

NASA NTRS1984

Detection of shocked atomic gas in the Kleinmann-Low nebula

The 63 micrometer (3)p(1)-(3)P(2) fine structure line emission of neutral atomic oxygen at the center of the Orion nebula with a resolution of 30" is presented. There are three main emission peaks. One is associated with the region of strongest thermal radio continuum radiation close to the Trapezium cluster, and probably arises at the interface between the HII region and the dense Orion molecular cloud. The other two line emission peaks, associated with the Kleinmann Low nebula, are similar in both distribution and velocity to those of the 2 micrometer S(1) line of molecular hydrogen and of the high velocity wings of rotational CO emission. The OI emission from the KL nebula can be produced in the shocked gas associated with the mass outflows in this region and is an important coolant of the shocked gas.

Werner, M.↗

NASA NTRS1984

Non-Imaging Remote Sensing Data

Spectrometric, radiometric and polarimetric remote sensing observations of wavelengths from gamma-rays to microwaves are addressed. The basic form of the data is one dimensional arrays. At the high energy end of the spectrum, data are typically presented as pulse count versus energy, and at lower energies, as intensity versus wavelength. High spectral resolution measurements (better 1% of wavelength) are particularly useful for identifying atomic, molecular, and ionic species while broader band measurements are adequate for identifying minerals and for determining total energy fluxes. Polarization data permit the study of finely divided material such as clouds and surfaces.

Source record↗

NASA NTRS1984

Detection of shocked atomic gas in the Kleinmann-Low nebula

The 63 micrometer (3)P(1)-(3)P(2) fine structure line emission of neutral atomic oxygen at the center of the Orion nebula with a resolution of 30'' is presented. There are three main emission peaks. One is associated with the region of strongest thermal radio continuum radiation close to the Trapezium cluster, and probably arises at the interface between the H II region and the dense Orion molecular cloud. The other two line emission peaks, associated with the Kleinmann-Low nebula, are similar in both distribution and velocity to those of the 2 micrometer S(1) line of molecular hydrogen and of the high velocity wings of rotational CO emission. The OI emission from the KL nebula can be produced in the shocked gas associated with the mass outflows in this region and is an important coolant of the shocked gas.

Werner, M. W.↗

NASA NTRS1991

Observations of Comet Levy (1990c) with the Hopkins Ultraviolet Telescope

Observations of Comet Levy (1990c) were made with the Hopkins Ultraviolet Telescope during the Astro-1 Space Shuttle mission on December 10, 1990. The spectrum, covering the wavelength range 415-1850 A at a spectral resolution of 3 A, shows the presence of carbon monoxide and atomic hydrogen, carbon, and sulfur in the coma. Aside from H I Lyman-beta, no cometary features are detected below 1200 A, although cometary O I and O II would be masked by the same emissions present in the day airglow spectrum. The 9.4 x 116 arcsecond aperture corresponds to 12,000 x 148,000 km at the comet. The derived production rate of CO relative to water is 0.11 + or - 0.02, compared with 0.04 + or - 0.01 derived from IUE observations (made in September 1990) which sample a much smaller region of the coma. This suggests the presence of an extended source of CO, as was found in comet Halley. Upper limits on Ne and Ar abundance are within one order of magnitude of solar abundances.

Feldman, P. D.↗

NASA NTRS1993

Density wave triggered star formation in grand design spirals

In normal spiral galaxies the arms are the main sites for star formation. This is the cause of their optical contrast compared with the rest of the disc. The spiral structure can be observed as a higher concentration of H2 regions, neutral gas (both atomic and molecular via CO), dust and stars than in the interarm disc. It seens generally accepted that, at least in grand design spirals, there are density waves in the discs. However, several questions are not clear yet and still under discussion. An important question could be termed the triggering dilemma (by analogy with the 'winding dilemma' raised in the forties): Is the enhanced star formation in the spiral arms triggered by the passage of a system of density waves or is it simply due to the presence of a higher column density of gas there? In the present work, we use triggering in the same sense as the moderate to strong triggering defined by Elmegreen (1992), that is to say that star formation in the arms occurs at a rate faster than that in the interarm zone, relative to the available placental gas. Our group has designed several tests to elucidate whether or not star formation is triggered in the arms with respect to the interarm region and we summarize one of them, that of the ratio of the star formation efficiency in the arms divided by that of the interarm zone at the same galactocentric distance which we may call the relative massive star formation efficiency, where the efficiency is defined using the ratio of the mass of stars (evaluated via the H alpha flux) to the mass of neutral gas, atomic plus molecular (which must be measured with the adequate angular resolution). If the relative efficiency is of order unity, the star formation is proportional to the mass of gas, if some kind of induced star formation is present, the relative efficiency should be considerably larger than unity.

Cepa, J.↗

NASA NTRS2001

Toward a Micro Gas Chromatograph/Mass Spectrometer (GC/MS) System

Miniature mass filters (e.g., quadrupoles, ion traps) have been the subject of several miniaturization efforts. A project is currently in progress at JPL to develop a miniaturized Gas Chromatograph/Mass Spectrometer (GC/MS) system, incorporating and/or developing miniature system components including turbomolecular pumps, scroll type roughing pump, quadrupole mass filter, gas chromatograph, precision power supply and other electronic components. The preponderance of the system elements will be fabricated using microelectromechanical systems (MEMS) techniques. The quadrupole mass filter will be fabricated using an X-ray lithography technique producing high precision, 5x5 arrays of quadrupoles with pole lengths of about 3 mm and a total volume of 27 cubic mm. The miniature scroll pump will also be fabricated using X-ray lithography producing arrays of scroll stages about 3 mm in diameter. The target detection range for the mass spectrometer is 1 to 300 atomic mass units (AMU) with are solution of 0.5 AMU. This resolution will allow isotopic characterization for geochronology, atmospheric studies and other science efforts dependant on the understanding of isotope ratios of chemical species. This paper will discuss the design approach, the current state-of-the art regarding the system components and the progress toward development of key elements. The full system is anticipated to be small enough in mass, volume and power consumption to allow in situ chemical analysis on highly miniaturized science craft for geochronology, atmospheric characterization and detection of life experiments applicable to outer planet roadmap missions.

Wiberg, D. V.↗

NASA NTRS2003

Crystallization Physics in Biomacromolecular Systems

The crystals are built of molecules of protein, nucleic acid and their complexes, like viruses, approx. 5x10(exp 3)+ 3x10(exp 6) Da in weight and 2 + 20 nm in effective diameter. This size strongly exceeds action range of molecular forces and makes a big difference with inorganic crystals. Intermolecular contacts form patches on the biomacromolecular surface. Each patch may occupy only a small percent of the whole surface and vary from polymorph to polymorph of the same protein. Thus, under different conditions (pH, solution chemistry, temperature, any area on the macromolecular surface may form a contact. The crystal Young moduli, E approx. equals 0.1 + 0.5 GPa are more than 10 times lower than that of inorganics and the biomolecules themselves. Water within biocrystals (30-70%) is unable to flow unless typical deformation time is longer than approx. 10(exp -5)s. This explains the discrepancy between light scattering and static measurements of E. Nucleation and Growth requires typically concentrations exceeding the equilibrium ones up to 100 times - because of the new size scale results in 10 - 10(exp 3) times lower kinetic coefficients than that needed for inorganic solution growth. All phenomena observed in the latter occur with protein crystallization and are even better studied by AFM. Crystals are typically facetted. Among unexpected findings of general significance are - net molecular exchange flux at kinks is much lower than that expected from supersaturation, steps with low (< approx. 10(exp -2)) kink density at steps follow Gibbs-Thomson law only at very low supersaturations, step segment growth rate may be independent of step energy. Crystal perfection is a must of biocrystallization to achieve the major goal to find 3-D atomic structure of biomacromolecules by x-ray diffraction. Poor diffraction resolution (> 3Angstrom) makes crystallization a bottleneck for structural biology. All defects typical of small molecule crystals are found in biocrystals, but the defects responsible for poor resolution are not identified. Conformational changes are one of them. Biocrystallization in microgravity reportedly results in 20% cases of better crystals. The mechanism of how lack of convection can do this is still not clear. Lower supersaturation, self-purification &om preferentially trapped homologous impurities and step bunching are viable hypotheses.

Chernov, A. A.↗

DOE OSTI2025

Atom Efficiency of Pd Sites for Methane Combustion: Single Atom Catalysts Versus Nanocatalysts

Methane combustion is an important reaction for energy production and methane removal from the atmosphere. This reaction highly relies on the use of noble metal Pd-based catalysts, which therefore drives the pursuit of catalysts with high atomic dispersion and activity. In this work, Pd/ceria catalysts dominated with Pd single atoms or nanosized Pd clusters (∼1 nm) are prepared and characterized by combining high-resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), in situ diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS), and Raman and X-ray absorption spectroscopy (XAS) techniques. By comparing the turnover frequencies (TOF; per every Pd atom) of Pd/ceria single atom catalysts and nanocatalysts, it is found that the atom efficiency of Pd is increased by 10 ∼30 times from single atom catalysts to nanocatalysts. For Pd single atom catalysts, although their activity can be tuned by changing the local structures, the intrinsic activity and number of active sites need to be further improved by engineering the surfaces of supports. For nanosized Pd species, despite the high TOF, the Pd atoms in the bulk structure are not directly participating in the catalytic reaction. Furthermore, this work highlights the importance of increasing the intrinsic activity of individual noble atoms, as well as the homogeneity of their local structures. For Pd/ceria systems reported in this work, our results indicate that from the application point of view, at the current stage, it is not practical to replace Pd nanocatalysts with single atom catalysts for methane combustion.

Pd↗

NASA NTRS2019

An X-Ray Spectroscopic Search For Dark Matter And Unidentified Line Signatures In The Perseus Cluster With Hitomi

The reported detection of a 3.5 keV emission signal in the Perseus cluster core by Bulbulet al. (2014, ApJ, 789, 13) was ruled out at high confidence in analysis conducted by Aharonian et al. (2017, ApJ, 837, L15) of X-ray spectra at 5 eV energy resolution obtained with the Hitomi observatory Soft X-ray Spectrometer (SXS). Using the same data, we search the full 2–12 keV SXS energy band for previously unidentified emission and absorption features. No significant unidentified line emission or absorption is found. Line flux upper limits (1σper resolution element) vary with photon energy and assumed intrinsic width, decreasing from∼100 at 2 keV to<10 photons cm−2s−1sr−1over most of the 5–10 keV energy range for a Gaussian line with Doppler broadening of 640 kms−1. Limits for narrower and broader lines have a similar energy dependence and are systematically smaller and larger, respectively. These line flux limits are used to constrain the decay rate of hypothetical dark matter candidates. For the sterile neutrino decay rate, we place new constraints over the mass range of 4–24 keV with mass resolution better than any previous X-ray analysis. Additionally, the accuracy of relevant thermal spectral models and atomic data are evaluated. The Perseus cluster spectra may be described by a composite of multi-temperature thermal and active galactic nuclei (AGN) power-law continua. Superposed on these, a few line emission signals possibly originating from unmodeled atomic processes (including SiXIV and FeXXV)are marginally detected and tabulated. Comparisons with previous X-ray upper limits and future prospects for dark matter searches using high-energy resolution spectroscopy are discussed.

Takayuki Tamura↗