Search NASA⌕ Search

SEARCH · Search NASA

Results for “CO2 Separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Core-scale numerical simulation and comparison of breakdown of shale and resulting fractures using sc-CO 2 and water as injectants

Supercritical carbon dioxide (sc-CO 2 ) is an alternative to water for stimulation of low permeability systems such as shale gas and geothermal resources. Previously core-scale experimental studies have compared the behavior of CO 2 to water injection for sample breakdown. Due to differences in experimental setup and core sample preparation, inconsistent or even apparently contradictory conclusions have resulted. To reconcile this contradiction, a phase-field numerical model is applied to understand hydraulic fracturing experiments using Green River shale found in the literature. The finite element numerical model incorporates a rate-dependent phase-field fracture model developed separately to describe fracture initiation and growth. We investigate the impact of various material and fluid properties on the resulting fractures. Most importantly, we study the effect of fluid properties and boundary conditions on the breakdown pressure, including the direction of the resulting fracture plane. Model results predict that (1) sc-CO 2 injection in the laboratory may result in greater breakdown pressure than that of water under no-flow boundary conditions because lower viscosity sc-CO 2 may result in pressure build up at the core boundary that opposes fracture initiation and (2) lower viscosity sc-CO 2 also produces fast-propagating fractures that are less influenced by the bedding plane on their resulting fracture topology. Here our model offers a straightforward explanation and reconciliation of existing experimental observations, as well as a means to extrapolate to new conditions. Exploration of field-scale conditions suggests less pronounced or no elevation in breakdown pressure when sc-CO 2 is injected because the pressure build up effect at the system boundary is significantly less or absent at field length scales.

42 ENGINEERING↗
DOE OSTI2020

Enhanced Thermal Conductivity in a Diamine-Appended Metal-Organic Framework as a Result of Cooperative CO 2 Adsorption

Using diamine-appended variants of the metal-organic framework M 2 (dobpdc) (M = Mg, Mn, Fe, Co, Zn; dobpdc 4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) exhibit exceptional CO 2 capture properties owing to a unique cooperative adsorption mechanism, and thus hold promise for use in the development of energy- and cost-efficient CO 2 separations. Understanding the nature of thermal transport in these materials is essential for such practical applications, however, as temperature rises resulting from exothermic CO 2 uptake could potentially offset the energy savings offered by such cooperative adsorbents. Here, molecular dynamics (MD) simulations are employed in investigating thermal transport in bare and e-2-appended Zn 2 (dobpdc) (e-2 = N -ethylethylenediamine), both with and without CO 2 as a guest. In the absence of CO 2 , the appended diamines function to enhance thermal conductivity in the ab -plane of e-2-Zn 2 (dobpdc) relative to the bare framework, as a result of noncovalent interactions between adjacent diamines that provide additional heat transfer pathways across the pore channel. Upon introduction of CO 2 , the thermal conductivity along the pore channel (the c -axis) increases due to the cooperative formation of metal-bound ammonium carbamates, which serve to create additional heat transfer pathways. In contrast, the thermal conductivity of the bare framework remains unchanged in the presence of zinc-bound CO 2 but decreases in the presence of additional adsorbed CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

CO 2 -selective membranes containing amino acid salts for CO 2 /N 2 separation

In this paper, facilitated transport membranes comprising polyvinylamine (PVAm) as fixed carrier and different amino acid salts (AAS) as mobile carriers were synthesized for post-combustion capture. The AAS carriers were prepared by deprotonating alanine (Ala), lysine (Lys), and proline (Pro) with 2-(1-piperazinyl)ethylamine (PZEA). CO 2 separation performances of the membranes with these AAS carriers were compared, and the AAS effectiveness to facilitate transport of CO 2 was in the order of PZEA-Pro > PZEA-Lys > PZEA-Ala. Here, the membrane comprising 35 wt.% PVAm and 65 wt.% PZEA-Pro at 57 °C rendered a promising CO 2 permeance of 936 GPU and a CO 2 /N 2 mixed gas selectivity of 193. When the PVAm was reduced to 15 wt.%, i.e., its 20 wt.% was replaced by the mobile carrier of PZEA-Sar (sarcosinate), the permeance further improved to 947 GPU with a remarkable CO 2 /N 2 selectivity of 210. Moreover, thermal gravimetric analysis showed a good thermal stability of the membrane, and membrane stability testing also gave stable transport performance. Furthermore, spectroscopic ellipsometry analysis exhibited a uniform membrane selective layer and an excellent agreement on the membrane thickness of ca. 170 nm measured independently by SEM. In addition, the membranes presented in this paper surpassed both the Robeson upper bound and the modified upper bound, indicating a great potential for CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Surface‐modified Ag@Ru‐P25 for photocatalytic CO 2 conversion with high selectivity over CH 4 formation at the solid–gas interface

Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO 2 reduction to solar fuels. A surface-modified Ag@Ru-P25 photocatalyst with H 2 O 2 treatment was designed in this study to convert CO 2 and H 2 O vapor into highly selective CH 4 . Ru doping followed by Ag nanoparticles (NPs) cocatalyst deposition on P25 (TiO 2 ) enhances visible light absorption and charge separation, whereas H 2 O 2 treatment modifies the surface of the photocatalyst with hydroxyl (–OH) groups and promotes CO 2 adsorption. High-resonance transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray absorption near-edge structure, and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst, while thermogravimetric analysis, CO 2 adsorption isotherm, and temperature programmed desorption study were performed to examine the significance of H 2 O 2 treatment in increasing CO 2 reduction activity. The optimized Ag 1.0 @Ru 1.0 -P25 photocatalyst performed excellent CO 2 reduction activity into CO, CH 4 , and C 2 H 6 with a ~95% selectivity of CH 4 , where the activity was ~135 times higher than that of pristine TiO 2 (P25). For the first time, this work explored the effect of H 2 O 2 treatment on the photocatalyst that dramatically increases CO 2 reduction activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nanoporous weakly coordinating anionic frameworks (Final Technical Report)

Under this award, we synthesized and characterized new weakly coordinating, anionic covalent organic frameworks. The motivation was to expand the class of covalent organic frameworks though the introduction of the first weakly coordinating anionic ones. The significance of the weakly coordinating anionic character of these frameworks is associated with the character of the counter (metal) cations in their pores. Those counter-cations, due to the inability to effectively coordinate to the pore walls, have a “naked”, and thus highly electrophilic, Lewis acidic character. Such properties are expected to translate to a number of interesting physical properties that can be potentially used for a range of energy-relevant applications. One of these applications is gas adsorption, separation, and storage. The electrophilic, Lewis acidic character of the counter-cations are expected to strongly bind to gas molecules entering the pores leading to higher gas sorption capacities. Other applications include heterogeneous catalysis, ion exchange, and solid state ion conduction. Within the project we explored a range of chemical blocks, and tested synthesis conditions to polymerize these building blocks to form the target materials. In particular, we focused on materials with group 15 elements like phosphorus in the oxidation state +5 and the coordination number 6, that have a formal -1 charge. The synthesis of such materials is challenging because its success depends on the absence of residual monomeric and oligomeric side-products in the pores, and the absence of significant framework interpenetration. Crystalline forms of these materials require sufficient reversibility of the polymerization reaction (which is difficult to achieve because group 15 elements like P tend to make strong covalent bonds with neighbored elements), as well as suitable polymerization rates that prevent the formation of kinetically controlled products. We had success with the preparation of anionic porous organic frameworks with anionic building blocks containing P(V)O6 octahedra synthesized through Yamamoto coupling reactions. These materials are non-crystalline because of the irreversible nature of the Yamamoto coupling reaction, but show porosity. The porosity and surface area can be significantly increased by co-reaction with electrostatically neutral co-reactants. Very high porosity and surface areas can be achieved when the materials are washed with hydrochloric acid. This method is commonly used to free products from Yamamoto coupling reactions from by-products. Indeed, this method removed by products from the pores of our materials, however it also led to the hydrolysis of the PO6 octahedra to form pending phosphonic acid groups (-PO3H)-groups in the frameworks (PA-POFs) which was actually not desired. Nonetheless, these materials showed high CO2 sorption capacities. In addition, they show extremely high (actually record) sorption capacities for the removal of a range of common micropollutants such as bisphenol A (BPA) and 4-nitrophenol in water. BPA is a wide-spread organic pollutant and a known endocrine disruptor. The maximum adsorption capacity of BPA at equilibrium is found to be as high as 3,366 mg g-1 by Langmuir adsorption model, which is more than 10 times greater than peer materials. The polymer also rapidly removes various other organic micropollutants with more than 90% removal efficiencies. In addition, the PA-POF material can be regenerated at least five times by mild washing using methanol without significant loss in removal efficiency. This is significant advantage over commonly used activated carbon materials (that are in Brita water faucet filters, for example). Comparison studies showed that only materials with the phosphonate groups show extreme sorption although the number of PA group is actually small according to solid state NMR and EDX data. More research would be needed to investigate why this is (a possibility is that the phosphonate groups have a multiplying effect in which a PA-induced initial adsorption leads to the adsorption of much more adsorbate). The extreme sorption capabilities can also be visually seen when colored adsorbates such as 4-nitrophenol are used, as the adsorption of the nitrobenzene leads to the decoloration of the solution. We have produced three short videos that illustrate the sorption capabilities compared to two peer materials (activated carbon from dismantled Brita water filters, and a electrostatically neutral, chemically related, porous organic polymer, respectively).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Assessing Impacts on Pressure Stabilization and Leasing Acreage for CO 2 Storage Utilizing Oil Migration Concepts

Favorable geological storage for CO 2 has long been pictured as large anticlines with thick sandstones, similar to oil reservoirs in the petroleum system. Unlike oil, however, stored CO 2 does not need to be recoverable, which raises the possibility of using dissolution and residual trapping to augment the capacity of buoyant traps and tap more of the bulk rock volume. The work presented builds on that idea, asking the following question: If we inject CO 2 down to a syncline – analogous to the carrier bed in the petroleum system – how would this injection mechanism impact storage capacity and plume shape, migration, and stabilization? To address this question, we built a reservoir model, based on seismic interpretation of Middle Miocene strata, offshore Galveston, Texas. 3-D seismic and well logs were used to characterize key intervals. Reservoirs chosen for modeling are progradational-aggradational sands with mud intercalation. They have a higher degree of heterogeneity than the more conventional reservoirs commonly targeted for CO 2 storage. Modeling investigated how far the CO 2 plume would migrate under two scenarios: (1) injecting CO 2 at the base of the salt withdrawal basin (syncline scenario) and (2) injecting CO 2 at the base of the structural closure, similar to a common injection well location for EOR purposes (base scenario). For each scenario, we separately simulated injection of 30 MT of CO 2 and 60 MT of CO 2 continuously for 30 years and observe the plume and pressure evolution for 100 years after the injection stops. The simulation shows that injecting the CO 2 into a syncline limits the vertical migration of CO 2 , thus making synclinal injection more secure. In the syncline scenario, the geological layer around the injection point is more heterogeneous than the layer in the base scenario; thus, the CO 2 tends to migrate laterally. Additionally, in the syncline scenario, the plume does not even reach the upper part of the anticline, allowing us to safely store an additional amount of CO 2 into the reservoir. Furthermore, the simulation also shows that in the syncline scenario, the times needed for the reservoir to reach its stabilized pressure after the end of injections are faster. To summarize, CO 2 injection at the base of a syncline could provide additional storage, increase the safety of the project from the limited vertical plume migration, and expedite plume stabilization, which could result in the decrease of monitoring frequency as the project runs, thus lowering the operating cost of the project in the long run.

58 GEOSCIENCES↗
DOE OSTI2025

Low-cost and high-performance heat exchangers for CSP

This project aimed to design and manufacture a low-cost and high-performance, particle–to–sCO 2 heat exchanger (HX) for Concentrated Solar Power (CSP) using additive manufacturing (AM). Three enabling technologies will be integrated to achieve the targeted cost and performance. The first technology is the extreme high‐speed laser materials deposition (LMD) AM process known by its German acronym EHLA that was invented at the Fraunhofer Institute for Laser Technology. The EHLA process utilizes a specially designed powder-feeding nozzle that enables a laser to melt the powder particles above the melt pool, in contrast to the conventional LMD process where the powders are melted inside the melt pool. EHLA enables much faster deposition rate than conventional LMD without the need to wait for the powders to melt. The second technology is an innovative double-helical HX geometry that can be easily fabricated using the EHLA process by rotating a rod at a high-speed to take advantage of the high EHLA deposition rate. The double-helical fins separate the hot region (the hot particle side) and the cold region (the sCO 2 side) and provide large heat transfer surface area without a large pressure drop on the sCO 2 side. The particle side will have a larger gap to facilitate the particle flow. The outer rims of the double helixes can be sealed off using the same AM process. After sealing-off, additional double helixes can be built radially on top of the first set to improve HX performance. The HX can be installed vertically for gravity-driven flow of the hot particles if necessary. The third technology is a low-cost high-temperature alumina-forming austenitic (AFA) steel TMA-6350 that has creep and oxidation resistance up to 1100 °C. These technologies together will enable high-performance and low-cost HXs for particle–to–sCO 2 for CSP.

14 SOLAR ENERGY↗
DOE OSTI2021

Development of Enabling Technologies for Chemical Looping Combustion and Chemical Looping with Oxygen Uncoupling (Final Report)

This report summarizes results from the project, “Development of Enabling Technologies for Chemical Looping Combustion and Chemical Looping with Oxygen Uncoupling,” which evaluated several aspects of dual fluidized bed chemical looping combustion and chemical looping with oxygen uncoupling (CLOU). The objective was to provide tools and enabling technologies to help advance fluidized bed chemical looping technology to pilot, demonstration and commercial scale. One focus area is oxygen carriers, which are key to chemical looping combustion. The copper oxygen carrier-coal ash system was systematically evaluated through a combination of thermodynamic modeling and lab-scale experiments, taking into consideration different oxygen carrier support materials and coal types. A method of mapping “safe” and “risk” zones for different combinations was established, and recommendations for target conditions are provided. In addition, a simple solution for limiting negative influence of some coal ashes, namely adding small amounts of calcium to the system, is proposed. In addition, a novel process for recovering and recycling copper from spent oxygen carriers is proposed. A new approach for design and operation of loop seals in a CLOU system was developed, and involves distinct gas injection points and a short horizontal section to help control the fate of the fluidizing gases. For the air-to-fuel reactor loop seal, the upstream side is fluidized with air, ideally input into the side rather than into the bottom, which prevents uncoupling (reduction) of the oxygen carrier before entering the fuel reactor. Also, alternative for separating oxygen carrier particles and gas in circulating fluidized bed-based chemical looping system is proposed. A new reduced reaction scheme for conversion of coal in copper-based CLOU was developed and implemented into CPFD Software’s Barracuda VR package. The resulting model provides higher fidelity than the baseline, especially when it comes to minor reactions that are part of the overall combustion environment. For in-reactor heat extraction, it was determined in this project that the best way to do that in a dual circulating fluidized-bed system is through heat exchange low in the air reactor. The air reactor is the hotter of the two and for a fast-fluidized circulating bed, the lower, more dense section has a higher heat transfer coefficient and offers more consistent particle-wall contact since it doesn’t have the splashing behavior the top of the bed does. It was determined that just the wall surface area in the lower quarter to third of the air reactor is sufficient to control temperatures in both reactors. Finally, consideration was given to a new concept for CLC, which involves a staged fuel reactor with a different type of oxygen carrier in each stage.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Advances in Desiccant Wheels for Dehumidification, VOC Mitigation, and CO 2 Removal for Energy-Efficient IAQ Management

Humidity control is pivotal to maintain occupant thermal comfort and suppress mold growth in indoor environments. Furthermore, poor indoor air quality (IAQ) due to the presence of volatile organic compounds (VOCs) and high concentrations (>1,000 ppm) of CO 2 can cause health issues and negatively affect cognitive performance. Therefore, providing high-quality indoor air has gained significant attention over the past decade. Conventional cooling coil and filter-based HVAC systems have limited capability to meet the augmented demand for occupant thermal comfort and high indoor air quality. Moreover, modern buildings are increasingly airtight to save energy, and increasing ventilation to mitigate VOC and CO 2 concentration is discouraged. Separate sensible and latent cooling technology using a rotary desiccant wheel presents a promising solution in this respect. Because of the development of desiccant materials with high water vapor, VOC, and CO 2 uptake, desiccant wheels can be used as an integrated technology option for IAQ management. Here, to promote desiccant wheel use for energy-efficient management of IAQ in buildings, this article reviews recent advancements in using desiccant wheels for dehumidification, VOC mitigation, and CO 2 capture from outdoor air. Finally, the article presents the authors’ perspective by summarizing the key research gaps in the field and discussing the future direction of research to address these gaps from two different aspects, namely, suitable adsorbent material development and desiccant wheel design.

CO2 capture↗
DOE OSTI2024

Novel, Middle and Long Wave Infrared Laser Sources For Accelerator Applications

The main accomplishment during Years 2020-2024 of the DOE Accelerator Stewardship Program is proof-of-principle demonstration of amplification of an ultrashort 10 µm seed pulse in a multiatmosphere CO 2 laser optically pumped by nanosecond pulses of either a ~4.3 µm Fe:ZnSe laser or a 2.8 µm electro-optically (EO) Q-switched Er: Laser. This has been accomplished at the UCLA Neptune Laboratory by using about 100 mJ, ~100 ns long pulses generated by the pump laser built for this purpose by the UAB team. Implementation of EO Q-switching regime in the solid-state Er:laser system made possible nanosecond synchronization between the pump pulse and the 0.5 ps seed pulse produced by a commercial Ti:sapphire laser based mid-IR OPA/DFG. The injection mode-locking regime realized in a compact Mult atmosphere 3 Hz CO 2 -He regenerative amplifier enabled generation of a train of ultrashort pulses separated by the cavity round-trip time of ~3.2 ns. The measured gain lifetime of ~1 µs at a total pressure of ~12-15 atm indicates that lifetime of the upper laser level is a critical limiting factor in designing high-pressure CO 2 amplifiers. A single picosecond 10 mm pulse with an energy 0.1-0.2 mJ was extracted from the amplifier’s cavity using an ultrafast Ge semiconductor switch whose reflectivity was photo-induced by a femtosecond 800 nm pulse. For direct amplification regime, nonlinear absorption in Ge at 10 mm at GW/cm 2 intensities limited the extracted energy. Therefore, the generated energy could be further increased by minimizing losses in the switch and optimizing the cavity mode size. Based on the obtained data in collaboration with BNL colleagues, we have designed a high-pressure CO 2 amplifier to be used as a preamplifier for the future experiments at the ATF BNL. The latter work is the subject of funding availability.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Carbonate Minerals and Dissimilatory Iron-Reducing Organisms Trigger Synergistic Abiotic and Biotic Chain Reactions under Elevated CO 2 Concentration

Increasing CO 2 emission has resulted in pressing climate and environmental issues. While abiotic and biotic processes mediating the fate of CO 2 have been studied separately, their interactions and combined effects have been poorly understood. To explore this knowledge gap, an iron-reducing organism, Orenia metallireducens, was cultured under 18 conditions that systematically varied in headspace CO 2 concentrations, ferric oxide loading, and dolomite (CaMg(CO 3 ) 2 ) availability. The results showed that abiotic and biotic processes interactively mediate CO 2 acidification and sequestration through "chain reactions", with pH being the dominant variable. Specifically, dolomite alleviated CO 2 stress on microbial activity, possibly via pH control that transforms the inhibitory CO 2 to the more benign bicarbonate species. The microbial iron reduction further impacted pH via the competition between proton (H + ) consumption during iron reduction and H + generation from oxidization of the organic substrate. Under Fe(III)-rich conditions, microbial iron reduction increased pH, driving dissolved CO 2 to form bicarbonate. Spectroscopic and microscopic analyses showed enhanced formation of siderite (FeCO 3 ) under elevated CO 2 , supporting its incorporation into solids. In conclusion, the results of these CO 2 -microbe-mineral experiments provide insights into the synergistic abiotic and biotic processes that alleviate CO 2 acidification and favor its sequestration, which can be instructive for practical applications (e.g., acidification remediation, CO 2 sequestration, and modeling of carbon flux).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Scaled-up fabrication of durable and porous adsorbent-coated minichannels on aluminum for CO 2 separation

A method was developed to fabricate zeolite 13X adsorbent-coated minichannels on aluminum for CO₂ adsorption applications in this study. It emphasizes the innovative use of aluminum as a substrate, which offers airtight assembly, paving the way for highly efficient adsorption systems. An optimized coating process was developed using a slurry of Zeolite 13X, yeast, sugar, and xanthan gum, resulting in durable and highly porous layers that enhance CO₂ capture performance. A PETG peeler was designed to remove the top layer of the yeast-engineered adsorbent coatings, revealing a super porous and foamy structure. The teeth of the peeler were designed and fabricated for high repeatability and rapid prototyping. Breakthrough experiments were conducted on the scaled-up adsorbent bed using gas mixtures of 80% CO₂, 20% N₂, and 20% CO₂, 80% N₂ to represent different industrial scenarios. The performance of the bed was evaluated at flow rates of 160 and 190 cm³ min -1 using a Raman Laser Gas Analyzer (RLGA), demonstrating stable adsorption without degradation across multiple cycles. Computational modeling of integral transport phenomena under the chosen experimental conditions was pursued using gPROMS ProcessBuilder™, and the modeling results were compared with those from the tests for adsorption time, which resulted in an error margin of 2% to 9% for the breakthrough time, confirming the easy reproducibility of the design through modeling. This research advances CO₂ capture technologies by providing an effective and scalable solution for producing aluminum-based adsorbent coated beds, supporting industrial carbon capture efforts.

CO2 capture↗
DOE OSTI2024

Enriched Background Isotope Study (EBIS): Analysis of 14C-Enriched Carbon Cycle in Soils and Litter at Forested Oak Ridge and AmeriFlux Sites, 2001-2011

These data provide a record of the multi-year, multi-institutional Enriched Background Isotope Studies (EBIS) projects that ran from 2000 through 2011. Elevated levels of 14C enriched CO2 in the air and soil atmosphere as well as leaf, stem, and root tissues were observed on the Oak Ridge Reservations (ORR) during the summer of 1999, and were attributed to local incinerator activities on and/or near the ORR (Trumbore et al. 2002). The isolated enrichment of the background levels of 14C in local forest ecosystem represented a unique opportunity to study unresolved carbon cycling processes such as the contribution of leaf versus root litter contributions to soil carbon accumulation, the rate of vertical transport of carbon into deep soil storage pools, and the differential contribution of physicochemical versus faunal driven processes to soil carbon cycling and sequestration. Leaf litter from the local enriched forest was transplanted to selected sites on the ORR and to selected AmeriFlux study sites to study soil C cycling across a range of soils and climates. The EBIS research projects provide data on C flux from litter sources to mineral soil sinks for United States eastern hardwood forests necessary for testing process hypotheses and judging efficacy of soil C cycling models. Experimental results from this study are being used to parameterize and refine existing carbon dynamics models, the quantification of the long-term fate of ecosystem carbon inputs and as a means to judge the potential for ecosystem carbon sequestration via enhance litter inputs to soil. EBIS observations support conclusions that intra- and inter-annual soil carbon cycling in hardwood forest soils should be characterized as a least a two-compartment system where surface leaf-litter and belowground root turnover represent primary carbon sources for organic-layer and mineral-soil carbon cycles, respectively. EBIS experiments were conducted to complete enriched litterfall maniplations in upland forests on Ultisol and Inceptisol soils of the Oak Ridge Reservation, Oak Ridge, Tennessee. We also collected additional14C-enriched materials for new experimental applications, and applied those materials to multiple AmeriFlux sites over a range of climatic, edaphic and biological conditions. The research provided data for addressing DOE's goal of understanding mechanisms controlling C flux, and for the improvement of models to be applied to policy discussions regarding the safe levels of greenhouse gases for the earth's system. There are 5 data files provided in comma separated (*.csv) format for vegetation, field litter, soil and air [C] and C isotope data from the EBIS studies and associated environmental data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Facilitated Transport Membranes with Tunable Amine-CO 2 Chemistry for CO 2 /H 2 Separation

CO 2 -selective, amine-containing facilitated transport membranes are of great interest for syngas purification since high-pressure H 2 can be retained upon CO 2 removal. A variety of amine-containing polymers have shown decent chemical and thermal stability at aggressive conditions, but their CO 2 /H 2 separation properties are largely limited by the hydrostatic compaction and severe carrier saturation associated with the high syngas pressure. Herein, we report a new approach to enhance the CO 2 permeability by manipulating the steric hindrance of the amine carriers. A series of α-aminoacids with different alkyl or hydroxyethyl substituents are deprotonated by 2-(1-piperazinyl)ethylamine, leading to nonvolatile amine carriers with different degrees of steric hindrance. For hosting the low MW amine carriers, a highly crosslinked poly(vinyl acetal) is synthesized as a water-swellable polymer network. In order to avoid membrane compaction, perforated graphene oxide mono-sheets are dispersed as reinforcement fillers. In the presence of moisture, a bulkier alkyl substituent to the amino site (increasing steric hindrance) destabilizes the carbamate adduct and thus drastically increases the chemisorption of CO 2 , while the incorporation of ethylene oxide groups provides additional physisorption of CO 2 . The enhanced CO 2 solubility significantly mitigates the carrier saturation behavior, and an unprecedented CO 2 /H 2 selectivity greater than 100 is demonstrated at 107 °C and 12.5 atm of CO 2 partial pressure. As the CO 2 partial pressure reduces to 0.4 atm, a less hindered amine yields a higher reactive diffusivity of CO 2 , resulting in a CO 2 permeance of 435 GPU with a selectivity greater than 500. These reaction-mediated polymeric membranes are well above the theoretical upper bound, and they are of great interest for designing a highly-selective membrane process for syngas purification.

08 HYDROGEN↗
DOE OSTI2026

Impact of Rock Wettability and Mineralization on CO 2 Storage Efficiency in Basalt Reservoirs

Basalt formations have emerged as highly promising targets for geological CO 2 storage due to their abundance of reactive silicate minerals that can rapidly convert dissolved CO 2 into stable carbonate minerals. The efficiency of CO 2 trapping in basalts, however, depends not only on their geochemical reactivity but also on reservoir wettability, which governs how CO 2 partitions among structural, residual, solubility, and mineral trapping mechanisms. However, wettability and mineral kinetics have largely been examined separately, wettability for plume migration and kinetics in terms of mineralization, leaving their coupled impact unquantified. Here, we systematically integrate th ese processes in a reservoir-scale reactive transport model to quantify the impact of three distinct wettability conditions (water-wet, mixed-wet, and CO 2 -wet) on plume migration, mineral precipitation, pore-scale blockage, and long-term immobilization. Results show that under ideal conditions (no mineralization), water-wet systems exhibited plume aspect ratios up to 28% higher than CO 2 -wet systems and promoted at least 60% greater residual trapping. When mineralization was incorporated, mineral trapping accounted for 57%, 53%, and 46% of the total immobilized CO 2 in water-wet, mixed-wet, and CO 2 -wet systems, respectively. Dissolved CO 2 contributed 43-46%, while residual trapping remained below 5%, and mobile CO 2 was substantially reduced due to mineralization, demonstrating that as the system becomes more water-wet, CO 2 is more effectively converted into stable carbonate minerals, although extensive mineral precipitation may lead to pore clogging. A global Sobol-Morris sensitivity analysis further reveals that the kinetic parameters of reactive minerals are the most influential factor, followed by wettability, while salinity has only a minor influence. Furthermore, these findings highlight that wettability is not merely a flow property but a fundamental control on CO 2 mineralization in basalts, with direct implications for site selection for storage projects.

Basalts↗
DOE OSTI2024

Precise Motion Control of Hybrid Hydraulic Electric Architecture (HHEA)

Off-highway heavy-duty vehicles have been long-standing users of hydraulic systems for power transmission and control. However, traditional hydraulic systems suffer from significant energy losses which lead to increased operating costs and a larger carbon footprint due to higher CO2 emissions. Improving the efficiency of these mobile machines is crucial not only for reducing their environmental impact but also for saving billions of dollars in operating costs. Currently, the state-of-the-art Load Sensing Architecture uses throttling valves for control, which significantly reduces its efficiency and does not recuperate energy from over-running loads. Researchers have developed several architectures such as Common Pressure Rail systems, Displacement Control, STEAM, and Electrohydraulic Architecture to improve the efficiency of off-road mobile machines. However, each of these architectures has its drawbacks. To increase system efficiency and take advantage of electrification benefits, our research group has developed a novel Hybrid Hydraulic-Electric Architecture (HHEA). The HHEA can significantly improve efficiency, decrease the size of electrical components, and maintain control performance. This new architecture has the potential to revolutionize the off-highway mobile machine industry and lead to a more sustainable future. The HHEA uses a set of common pressure rails to provide the majority of power to the actuators via power-dense hydraulics and uses electric motors for precise control and power modulation. In the context of off-road mobile machines, energy savings are undoubtedly important but it is equally important to consider the machines’ ability to perform tasks with precision and accuracy according to given commands. Therefore, precise motion control is of utmost importance to maintain the utility of Hybrid Hydraulic-Electric Architecture (HHEA). The HHEA presents a unique challenge to motion control due to the discrete pressure changes that occur when the system switches between selected pressure rails. These changes are made to minimize system inefficiencies or to keep the system within the torque capability of the electric motor. Hence, it is important to solve the motion control challenges for HHEA. This thesis aims at developing an effective motion control strategy for HHEA. The dissertation presents a two-tiered control strategy for HHEA, comprising a high-level and a low-level controller. The primary responsibility of the high- level controller is to optimize energy efficiency by making informed pressure rail selections. On the other hand, the low-level controller is focused on achieving precise motion control of the HHEA, which is crucial for realizing the desired reference trajectories. To achieve this, the low-level controller utilizes a passivity-based backstepping integral controller as the nominal control, which handles the motion control between two pressure rail switches. Additionally, a separate least norm controller is utilized as a transition controller to manage motion control during pressure rail transitions. The effectiveness of the combined control strategy is demonstrated through experiments conducted on two hardware-in-the-loop testbeds. Furthermore, the HHEA is installed on the boom and stick actuators of a backhoe arm to build a Human-in-the-Loop system that a human operator can control. A real-time rail switching algorithm is developed to determine pressure rail switching based on present duty cycle information from the operator. Modifications have been made to the human-machine interface to achieve more intuitive control. Modifications include performing control in the task-oriented coordinates, incorporating pressure feedback to enhance control with physical interaction, and using velocity field control to simplify multi-degree-of-freedom tasks and to enable novice operators to perform them with reduced risk, improved efficiency, and productivity. The research in this dissertation makes significant contributions to the field of off-road mobile machine control, providing a novel and effective control strategy for the HHEA, and demonstrating the potential for simplified machine operation.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Oxy-Combustion System Process Optimization

The overall objective of this work is to develop a new chemical absorbent-based, high pressure, CO 2 purification system to remove the residual oxygen that currently contaminates the recovered CO 2 , and to optimize the Pressurized Oxy-Combustion (POxC) process to minimize the Cost of Electricity (COE) generated in this advanced combustion process. TDA developed and validated the performance of the oxygen removal system for CO 2 purification. In collaboration with the Advanced Power & Energy Program (APEP) of University of California, Irvine (UCI), we optimized the POxC process, including thermal management, heat integration, and power cycle optimization using process design and modeling supported with Aspen Plus® process simulations. The techno-economic analysis results indicate that the pressurized oxycombustion coal power plant with Ion-transport membrane (ITM) air separation unit (ASU) (Case 2 – 30.55%) does not show an advantage over a cryogenic ASU (Case 1 – 31.24%) while TDA’s sorption-based ASU (Case 4 - 32.61%) shows a significant advantage over the cryogenic ASU (Case 1 – 331.24%). The specific plant costs show a wide range with a low of $2544/kW for Case 11C (TDA ASU, co-sequestering the SO x , and ultra-supercritical steam cycle) to a high of $2975/kW for Case 12A (cryogenic ASU and sCO 2 cycle). In general, the ITM ASU based cases have lower specific plant costs than the corresponding cryogenic ASU based cases while the TDA ASU based cases show the lowest specific plant costs. The main reason for lowering these costs is the higher overall plant thermal efficiency which decreases the plant cost on a $ per kW basis. Next comparing the cases with different power cycle working fluid conditions in terms of temperature and pressure while all utilizing steam, similar trends as the plant costs may be observed. However, with the supercritical CO 2 (sCO 2 ) cycle, the increase in thermal efficiency of the sCO 2 cycle was not able to offset its increase in plant cost making the plant costs higher than those of the corresponding steam cycle cases. The Cost of Electricity (COE) again shows similar trends as the specific plant costs. The COE for Case 11C at $110.1/MWh is also the lowest, but among all cases that do not co-sequester the SO x , Case 12C (TDA ASU and sCO 2 cycle) has the lowest COE at $\$$117.5/MWh while the highest is for Case 8A (cryogenic ASU and supercritical steam cycle) at $130.4/MWh.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Theory and Simulation of Metal–Insulator–Semiconductor (MIS) Photoelectrodes

A metal–insulator–semiconductor (MIS) structure is an attractive photoelectrode-catalyst architecture for promoting photoelectrochemical reactions, such as the formation of H 2 by proton reduction. The metal catalyzes the generation of H 2 using electrons generated by photon absorption and charge separation in the semiconductor. The insulator layer between the metal and the semiconductor protects the latter element from photo-corrosion and, also, significantly impacts the photovoltage at the metal surface. Understanding how the insulator layer determines the photovoltage and what properties lead to high photovoltages is critical to the development of MIS structures for solar-to-chemical energy conversion. Herein, we present a continuum model for charge-carrier transport from the semiconductor to the metal with an emphasis on mechanisms of charge transport across the insulator. The polarization curves and photovoltages predicted by this model for a Pt/HfO 2 /p-Si MIS structure at different HfO 2 thicknesses agree well with experimentally measured data. The simulations reveal how insulator properties (i.e., thickness and band structure) affect band bending near the semiconductor/insulator interface and how tuning them can lead to operation closer to the maximally attainable photovoltage, the flat-band potential. This phenomenon is understood by considering the change in tunneling resistance with insulator properties. The model shows that the best MIS performance is attained with highly symmetric semiconductor/insulator band offsets (e.g., BeO, MgO, SiO 2 , HfO 2 , or ZrO 2 deposited on Si) and a low to moderate insulator thickness (e.g., between 0.8 and 1.5 nm). Beyond 1.5 nm, the density of filled interfacial trap sites is high and significantly limits the photovoltage and the solar-to-chemical conversion rate. These conclusions are true for photocathodes and photoanodes. This understanding provides critical insight into the phenomena enhancing and limiting photoelectrode performance and how this phenomenon is influenced by insulator properties. The study gives guidance toward the development of next-generation insulators for MIS structures that achieve high performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗