Search NASA⌕ Search

SEARCH · Search NASA

Results for “COPRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Controlled evolution of rare earth phosphate in coal ash slag

Coal ash slag as a waste by-product, is generated from commercial processes that include gasification facilities, power plants, and steelmaking industries. Some is recycled into construction materials, insulation fibers, and used as a soil neutralizer, but the majority is still discarded. Coal ash slag exhibit trace amounts of critical materials including rare earth elements (REEs). An economically viable extraction of REEs from the coal ash would lower the production costs, addressing the availability and environmental concerns. In nature, most REEs exist as phosphate such as monazite but its synthetic evolution in coal ash slag has never been reported. In industrial processes, P may originate from coal, additives, and/or refractory liners. REEs may be extracted by first concentrating REEs into phosphates, sulphide, or fluorides [1], or carbonates [2]. In this work, P-enriched coal ash slag bearing REEs was first melted above 1600 °C, then crystallization behaviors in the melt during controlled cooling was studied. REE phosphate coprecipitated with mullite and hematite with mullite being the first crystal to form on cooling. The REEs were rejected from the molten slag, mullite, and hematite, and tended to segregate only to the phosphate phase with REE concentration as high as 58 wt.% in the structure.

Nakano, Jinichiro↗

The Effect of Si and Al Concentration Ratios on the Removal of U(VI) under Hanford Site 200 Area Conditions-12115

Injection of reactive gases, such as NH{sub 3}, is an innovative technique to mitigate uranium contamination in soil for a vadose zone (VZ) contaminated with radionuclides. A series of experiments were conducted to examine the effect of the concentration ratio of silicon to aluminum in the presence of various bicarbonate concentrations on the coprecipitation process of U(VI). The concentration of Al in all tests remained unchanged at 2.8 mM. Experiments showed that the removal efficiency of uranium was not significantly affected by the different bicarbonate and U(VI) concentrations tested. For the lower Si:Al molar ratios of 2:1 and 18:1, the removal efficiency of uranium was relatively low (≤ 8%). For the Si:Al molar ratio of 35:1, the removal efficiency of uranium was increased to an average of ∼82% for all bicarbonate concentrations tested. At higher Si:Al molar ratios (53:1 and above), a relatively high removal efficiency of U(VI), approximately 85% and higher, was observed. These results demonstrate that the U(VI) removal efficiency is more affected by the Si:Al molar ratio than by the bicarbonate concentration in solution. The results of this experiment are promising for the potential implementation of NH{sub 3} gas injection for the remediation of U(VI) -contaminated VZ. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Multi-Phased, Post-Accident Support of the Fukushima Dai-Ichi Nuclear Power Plant - 12246

In the wake of the March 11 earthquake and tsunami and the subsequent flooding of several of the Fukushima Dai-Ichi reactors, Japan and the Japanese utility TEPCO faced a crisis situation with incredible challenges: substantial amounts of radioactive mixed seawater and freshwater accumulated in the basements of four reactor and other buildings on the site. This water held varying levels of contamination due to the fact that it had been in contact with damaged fuel elements in the cores and with other contaminated components. The overall water inventory was estimated at around 110,000 tons of water with contamination levels up to the order of 1 Ci/l. Time was of the essence to avoid overflow of this accumulated water into the ocean. AREVA proposed, designed and implemented a water treatment solution using a proven chemical coprecipitation process with ppFeNi reagent, which is currently in use for effluent treatment on several nuclear sites including AREVA sites. In addition to the extremely short schedule the other challenge was to adapt the chemical treatment process to the expected composition of the Fukushima water and, in particular, to evaluate the impact of salinity on process performance. It was also necessary to define operating conditions for the VEOLIA equipment that had been selected for implementation of the process in the future facility. The operation phase began on June 17, and by the end of July more than 30,000 tons of highly radioactive saltwater had been decontaminated - the Decontamination Factor (DF) for Cesium was ∼10{sup 4}. It allowed recycling the contaminated water to cool the reactors while protecting workers and the environment. This paper focuses on the Actiflo{sup TM}-Rad water treatment unit project that was part of the TEPCO general water treatment scheme. It presents a detailed look at the principles of the Actiflo{sup TM}-Rad, related on-the-fly R and D, an explanation of system implementation challenges, and a brief summary of operation results to date. AREVA's response to the Fukushima Dai-Ichi crisis was multi-phased: emergency aid and relief supply was sent within days after the accident; AREVA-Veolia engineering teams designed and implemented a water treatment solution in record time, only 3 months; and AREVA continues to support TEPCO and propose solutions for waste management, soil remediation and decontamination of the Fukushima Dai-Ichi site. Despite the huge challenges, the Actiflo{sup TM}-Rad project has been a success: the water treatment unit started on time and performed as expected. The performance is the result of many key elements: AREVA expertise in radioactive effluents decontamination, Veolia know-how in water treatment equipments in crisis environment, and of course AREVA and Veolia teams' creativity. The project success is also due to AREVA and Veolia teams' reactivity and high level of commitment with engineering teams working 24/7 in Japan, France and Germany. AREVA and Veolia deep knowledge of the Japanese industry ensured that the multi-cultural exchanges were not an issue. Finally the excellent overall project management and execution by TEPCO and other Japanese stakeholders was very efficient. The emergency water treatment was a key step of the roadmap towards restoration from the accident at Fukushima Dai-Ichi that TEPCO designed and keeps executing with success. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Fabrication and Properties of Advanced Ceramic Technetium Waste Forms - 17311

Technetium-99 (Tc, t{sub 1/2} = 2.13 x 10{sup 5} years) is a challenge from a nuclear waste perspective and is one of the most abundant, long-lived radioisotopes found in used nuclear fuel (UNF). Within the Hanford Tank Waste Treatment and Immobilization Plant, technetium volatilises at typical glass melting temperature, is captured in the off-gas treatment system and recycled back into the feed to eventually increase Tc-loadings of the glass. In this research we are providing a technical solution for continuously depleting the Tc-content of the glass melter feed by precipitating Tc from the off-gas effluents and effectively immobilizing {sup 99}Tc as durable ceramic waste form. We have developed a wet-chemical coprecipitation-based synthesis route to fabricate gram-size Tc-based pyrochlores with the model composition Sm{sub 2}(Tc{sub 0.5-x}Ru{sub x}Ti{sub 0.5}){sub 2}O{sub 7}. These ceramic Tc waste forms exhibit better technetium retention and corrosion resistance in ASTM C1220-10 based testing compared with technetium-containing LAWE4-type borosilicate glass, combined with optimal waste loading. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mineral Dissolution upon Alkaline Treatment and Variable Redox Conditions

Over 200.000 kg of uranium released to vadose zone from historic leaks and improper disposal of wastes from plutonium production. U highly mobile due to presence of carbonates and oxidizing conditions with partition coefficients k{sub d} of 0.11-8 mL/g at pH 8. Ammonia (NH{sub 3}) gas injection investigated as an in situ remediation technique that will not introduce additional liquid to the subsurface. Objectives: Understand the impact of remediation with base injection on geochemical process in Hanford site vadose zone. Understand effects of different base treatments on mineral dissolution. Results: - incongruent dissolution based on mineral stoichiometry: if ratio = 1 congruent dissolution occurs, if ratio <1.0 greater leaching of Si and Al and incongruent dissolution occurs. Conclusions: incongruent dissolution occurred for both alkaline treatments and redox conditions across all minerals. By 1440 hr. all normalised Al:Si ratios were <1 representing less [Al]{sub aq} and suggesting formation of secondary Al precipitates as a function of time. [Si]{sub aq} increased and [Al]{sub aq} decreased with increasing contact time with both alkaline treatments. NaOH dissolved slightly more than NH{sub 4}OH especially for [Al]{sub aq} in all investigated minerals. No clear trend for muscovite and montmorillonite for redox conditions but slightly greater Si dissolved under anaerobic conditions for illite. Ammonia gas injection increases the pH and dissolves aluminosilicate minerals in the vadose zone. U is likely to coprecipitate with secondary minerals forming at elevated pH and as the system reequilibrates at natural neutral pH. Further, U solids may be coated with low solubility, secondary precipitates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arsenic Sequestration By Sorption Processes in High-Iron Sediments

High-iron sediments in North Haiwee Reservoir (Olancha, CA), resulting from water treatment for removal of elevated dissolved arsenic in the Los Angeles Aqueduct system, were studied to examine arsenic partitioning between solid phases and porewaters undergoing shallow burial. To reduce arsenic in drinking water supplies, ferric chloride and a cationic polymer coagulant are added to the aqueduct upstream of Haiwee Reservoir, forming an iron-rich floc that scavenges arsenic from the water. Analysis by synchrotron X-ray absorption spectroscopy (XAS) showed that the aqueduct precipitate is an amorphous hydrous ferric oxide (HFO) similar to ferrihydrite, and that arsenic is associated with the floc as adsorbed and/or coprecipitated As(V). Arsenic-rich floc and sediments are deposited along the inlet channel as aqueduct waters enter the reservoir. Sediment core samples were collected in two consecutive years from the edge of the reservoir along the inlet channel using 30- or 90-cm push cores. Cores were analyzed for total and extractable arsenic and iron concentrations. Arsenic and iron speciation and mineralogy in sediments were examined at selected depths by synchrotron XAS and X-ray diffraction (XRD). Sediment-porewater measurements were made adjacent to the core sample sites using polyacrylamide gel probe samplers. Results showed that sediment As(V) is reduced to As(III) in all cores at or near the sediment-water interface (0--4 cm), and only As(III) was observed in deeper sediments. Analyses of EXAFS spectra indicated that arsenic is present in the sediments mostly as a bidentate-binuclear, inner-sphere sorption complex with local atomic geometries similar to those found in laboratory studies. Below about 10 cm depth, XAS indicated that the HFO floc had been reduced to a mixed Fe(II, III) solid with a local structure similar to that of synthetic green rust (GR) but with a slightly contracted average interatomic Fe-Fe distance in the hydroxide layer. There was no evidence from XRD for the formation of a crystalline GR phase. The release of dissolved iron (presumably Fe{sup 2+}) and arsenic to solution, as monitored by in situ gel probes, was variable but, in general, occurred at greater depths than arsenic reduction in the sediments by spectroscopic observations and appears to be near or below the depth at which sediment GR was identified. These data point to reductive dissolution of the sorbent iron phase as the primary mechanism of release of sorbed arsenic to solution.

43 PARTICLE ACCELERATORS↗

Contaminant Release from Residual Waste in Single Shell Tanks at the Hanford Site, Washington, USA - 9276

Determinations of elemental and solid-phase compositions, and contaminant release studies have been applied in an ongoing study of residual tank wastes (i.e., waste remaining after final retrieval operations) from five of 149 underground single-shell storage tanks (241-C-103, 241-C-106, 241-C-202, 241-C-203, and 241-S-112) at the U.S. Department of Energy’s Hanford Site in Washington State. This work is being conducted to support performance assessments that will be required to evaluate long-term health and safety risks associated with tank site closure. The results of studies completed to date show significant variability in the compositions, solid phase properties, and contaminant release characteristics from these residual tank wastes. This variability is the result of differences in waste chemistry/composition of wastes produced from several different spent fuel reprocessing schemes, subsequent waste reprocessing to remove certain target constituents, tank farm operations that concentrated wastes and mixed wastes between tanks, and differences in retrieval processes used to remove the wastes from the tanks. Release models were developed based upon results of chemical characterization of the bulk residual waste, solid-phase characterization (see companion paper 9277 by Krupka et al.), leaching and extraction experiments, and geochemical modeling. In most cases empirical release models were required to describe contaminant release from these wastes. Release of contaminants from residual waste was frequently found to be controlled by the solubility of phases that could not be identified and/or for which thermodynamic data and/or dissolution rates have not been measured. For example, significant fractions of Tc-99, I-129, and Cr appear to be coprecipitated at trace concentrations in metal oxide phases that could not be identified unambiguously. In the case of U release from tank 241-C-103 residual waste, geochemical calculations indicated that leachate concentrations of U were likely controlled by the solubility of schoepite (UO3•2H2O). Therefore, a reactive transport model based upon solubility of schoepite and the expected composition and infiltration rates of pore water could be used to simulate future release of U from this residual tank waste. In addition to the development of release models, the residual tank waste studies completed so far have provided a number of new insights that have changed our understanding of residual tank waste. For example, the release of contaminants from different tanks, although governed by the same general chemical principles, can be very different. It has also been found that significant fractions of Tc-99 and other typically highly mobile contaminants are frequently not readily released from tank residuals and occur in recalcitrant phases that are resistant to aqueous dissolution. As these studies progress, such key cross-cutting geochemical processes and solid phase characteristics important to contaminant release from residual tank waste are becoming apparent. This may allow the grouping of tanks into general categories with certain common chemical features and contaminant release characteristics – an important goal because complete characterization of residual wastes from all 149 single-shell storage tanks is not practical.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterizing Solids in Residual Wastes from Single-Shell Tanks at the Hanford Site.

Solid-phase characterization methods have been used in an ongoing study of residual wastes (i.e., waste remaining after final retrieval operations) from underground single-shell storage tanks 241-C-103, 241 C 106, 241-C-202, 241-C-203, and 241-S-112 at the U.S. Department of Energy’s Hanford Site in Washington State. The results of studies completed to date show variability in the compositions of those residual wastes and the compositions, morphologies, and crystallinities of the individual phases that make up these wastes. These differences undoubtedly result from the various waste types stored and transferred into and out of each tank and the different sluicing and retrieval operations used for waste retrieval. The studies indicate that these residual wastes are chemically-complex assemblages of crystalline and amorphous solids that contain contaminants as discrete phases and/or coprecipitated within oxide/hydroxide phases. Depending on the specific tank, various solids (e.g., gibbsite; böhmite; dawsonite; cancrinite; Fe oxides/hydroxides such as hematite, goethite, and maghemite; rhodochrosite; lindbergite; whewellite; nitratine; and numerous amorphous or poorly crystalline phases) have been identified by X-ray diffraction and scanning electron microscopy/energy dispersive X-ray spectroscopy in residual wastes studied to date. The studies also show that contact of residual wastes with Ca(OH)2- and CaCO3-saturated aqueous solutions, which were used as surrogates for the compositions of pore-fluid leachants derived from young and aged cements, respectively, may alter the composition of solid phases present in the contacted wastes. Iron oxides/hydroxides have been identified in all residual wastes studied to date. They occur in these wastes as discrete particles, particles intergrown within a matrix of other phases, and surface coatings on other particles or particle aggregates. These Fe oxides/hydroxides typically contain trace concentrations of other transition metals, such Cr, Mn, Ni, Pb, and/or U. Recent analyses of residual waste from 241-C-103 have revealed the presence of Tc-containing Fe oxide/hydroxide particles, which is believed to be the first direct evidence of Tc in solid phases in actual samples of Hanford pre-final retrieval tank waste or post-final retrieval residual waste. The presence of mineralized coatings, such as Fe oxides/hydroxides or reaction products precipitated from contact with cement pore fluids, on contaminant-containing particles could decrease their rate of dissolution, thereby delaying the release of contaminants until the coatings dissolve sufficiently to expose the underlying matrix to infiltrating pore fluids. Certain key cross-cutting geochemical processes and solid phase characteristics important to contaminant waste release are becoming evident, now that residual wastes have been studied from several single-shell tanks. As more residual tank wastes are characterized in terms of composition and contaminant release, it is anticipated that common characteristics with respect to the type of wastes stored in the tanks will become evident. This may allow the grouping of tanks into general categories with certain common chemical features and contaminant release characteristics - an important goal because complete characterization of residual wastes from all 149 single-shell storage tanks is not practical. Additionally, information garnered from residual waste characterization activities can be used to optimize future waste retrieval operations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Adsorption Performance and Mechanisms of Methylene Blue Removal by Non-magnetic and Magnetic Particles Derived from the Vallisneria natans Waste

Vallisneria natans (V. natans) is a submerged aquatic plant, and its dried biomass waste was used to prepare magnetic particle biomass adsorbent by chemical co-precipitation via FeSO{sub 4}·7H{sub 2}O and FeCl{sub 3}·6H{sub 2}O as iron precursors. Brunauer–Emmett–Teller specific surface area, total pore volume, and average pore width were 7.434 m{sup 2} g{sup −1}, 0.013 cm{sup 3} g{sup −1}, and 6.992 nm for magnetic V. natans, correspondingly, and 3.575 m{sup 2} g{sup −1}, 0.004 cm{sup 3} g{sup −1}, and 4.476 nm for non-magnetic V. natans, respectively. The adsorption kinetics of methylene blue (MB) is a more appropriate fit for pseudo-second-order kinetic model than pseudo-first-order and intraparticle diffusion kinetic models. Isotherm results showed that the adsorption of MB onto the non-magnetic and magnetic adsorbents agrees well with Dubinin–Radushkevich isotherm model. Moreover, the thermodynamics study implied that the adsorption of MB onto both adsorbents is a spontaneous and exothermic process. The maximum adsorption capacities of MB on non-magnetic and magnetic V. natans were 657.90 and 473.93 mg g{sup −1} at 303 K, correspondingly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, Characterization, Optical Properties, and Electron Paramagnetic Resonance for Nano Zn{sub 0.5}Co{sub 0.5}Fe{sub 2−x}Pr{sub x}O{sub 4}

Nano ferrite samples of type Zn{sub 0.5}Co{sub 0.5}Fe{sub 2−x} Pr{sub x}O{sub 4}, 0 ≤ x ≤ 0.2, were prepared by co-precipitation method for different concentration of Pr ions at a calcination temperature of 823 K. The samples were characterized using x-ray diffraction and transmission electron microscope (TEM), UV spectroscopy, FTIR, and electron paramagnetic resonance (EPR). The increase in concentration of Pr ions shows a significant change in the formed nano ferrite particles size, degree of aggregation, energy band gap, and lattice parameters. X-band (9.24 GHz) EPR spectra at room temperature showed a decrease in the g factor as the Pr content was increased. Furthermore, the variation of the Pr{sup 3+} concentration in the samples led to different aggregation states, ranging from isolated nanoparticles with average crystal size of 28.5 to about 15 nm, as confirmed by x-ray diffraction and high-resolution transmission electron microscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and Characterization of Magnetite–Chitosan Nanoparticles and Evaluation of Their Cytotoxicity Effects on MCF7 and Fibroblast Cells

Nowadays, magnetic nanoparticles play a key role in drug treatment. However, if they are uncoated, they might aggregate and cause embolism in drug delivery. To avoid this, they are generally coated with polymers. In this investigation, magnetic nanoparticles (MNPs) were coated with chitosan through in situ co-precipitation process and their properties in addition to their cytotoxicity in MCF7 and fibroblast cells were analyzed. The results showed MNPs–chitosan nanoparticles would contain an average mean diameter of 32 nm and a saturation magnetization (M{sub S}) value of 38.87 emu/g. To characterize the synthesized nanoparticles in terms of structural, morphological and magnetic properties, Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA) and vibrating sample magnetometry (VSM) studies were used. Toxicity test was also done to investigate whether their presence would cause any toxicity in the body; in addition, antibacterial assay was done to analyze if nanoparticles could be used as an antimicrobial agent.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Chromium Substitution on Structural and Magnetic Properties of Nickel-Cobalt Ferrite Nanoparticles Synthesized by Co-precipitation Method

Ni{sub 0.3}Co{sub 0.7}Cr{sub x}Fe{sub 2−x}O{sub 4} (x = 0, 0.2, 0.4, and 0.6) nanoparticles were synthesized by co-precipitation method followed by annealing treatment. The structural and magnetic properties of the samples were determined by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric and differential scanning calorimetry (TG-DSC) analysis, and a vibrating sample magnetometer (VSM) at room temperature. The XRD patterns revealed a single-phase cubic spinel structure for all the annealed products. The average crystallite size is in the range of 45–60 nm. Cation distribution by XRD analysis indicated that Cr{sup 3+} ions preferentially replace Fe{sup 3+} ions from the octahedral sites due to their favorable crystal field effects; with increasing Cr content, it was observed that Co{sup 2+} migrated from octahedral sites to tetrahedral sites. The decrease in saturation magnetization with the increase in Cr concentration could be attributed to reduction in the super-exchange interaction between the A and B sublattices. The observed decrease in coercivity can be explained by reduction in magneto-crystalline anisotropy that resulted from migration of Co{sup 2+} ions from B sites to A sites with the increase in Cr content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental and Theoretical Investigations of Magnetic Properties of Co Ferrite/Polyvinyl Alcohol Nanocomposites

Cobalt ferrite nanoparticles (NPs) have been synthesized by the modified co-precipitation technique in the presence of the polyvinyl alcohol (PVA) matrix. The structural and magnetic properties of NPs are tunable by means of interaction between the polymer and the surface of NPs. Magnetic properties of NPs were simulated using the accurate Monte Carlo (MC) method. In addition, the magnetic anisotropy constant has been obtained by means of the law of approach to saturation magnetization (LAS). The experimental and theoretical results are in good agreement with each other and show that the as-synthesized NPs are single domain and approximately non-interacting. The anisotropy constant and size of the NPs increase by increasing the concentration of precursors in the reaction medium. Nanocomposites have been characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). Hysteresis loops were investigated at room temperature using a vibrating sample magnetometer (VSM). The crystallite size of single-domain NPs is lower than 20 nm, and the obtained results from FT-IR confirmed the interaction between PVA and the surface of the particles. These approximately non-interacting NPs are useful for magnetic data storage.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nano-size Analysis through Magnetization Data for Developed Mn{sub 0.5}Zn{sub 0.5}X{sub 0.2}Fe{sub 1.8}O{sub 4} (X = Fe, Gd, La, Sm)

Mn{sub 0.5}Zn{sub 0.5}X{sub 0.2}Fe{sub 1.8}O{sub 4} (X = Fe, Gd, La, Sm) nano-ferrite were synthesized by chemical co-precipitation method. Magnetic measurements for the synthesized Mn{sub 0.5}Zn{sub 0.5}X{sub 0.2}Fe{sub 1.8}O{sub 4} (X = Fe, Gd, La, Sm) nano-particles were recorded at temperatures 10 and 300 K. Magnetic moment per unit formula in terms of Bohr magnetron (μ{sub B}) was calculated from magnetization data of hysteresis loops. Particle size was calculated from the magnetization data for all compositions of Mn{sub 0.5}Zn{sub 0.5}X{sub 0.2}Fe{sub 1.8}O{sub 4} (X = Fe, Gd, La, Sm) ferrite particles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Facile Low-Temperature Synthesis of MnLa{sub x}Fe{sub 2−x}O{sub 4} Nanoferrites with Structural and Electrical Characterization

A series of nanocrystalline lanthanum-substituted manganese ferrite having compositional formula MnLa{sub x}Fe{sub 2−x}O{sub 4} (x = 0.02, 0.04, 0.06, 0.08, 0.10) were synthesized by a chemical co-precipitation method. Phase analysis was carried out using XRD. It reveals the formation of spinel phase without any unwanted secondary phases. The formation of single-phase spinel structure was supported by FTIR studies. Microstructural study was carried out using SEM. Elemental composition was studied using EDX. Electrical properties namely frequency variation of dielectric constant, dielectric loss tangent, and ac conductivity of prepared nanoferrites were studied. The observed electrical properties were discussed and explained in terms of hopping mechanism of charge carrier in ferrites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of NaOH Concentration and Adding Sequences on Structural and Magnetic Properties of Ni{sub 0.4}Co{sub 0.6}Fe{sub 2}O{sub 4} Nanopowders Prepared Via Co-precipitation Route

Ni{sub 0.4}Co{sub 0.6}Fe{sub 2}O{sub 4} nanopowders were prepared via the co-precipitation route followed by annealing treatment. The structural and magnetic properties of the as-synthesized samples were determined by XRD, FT-IR, TG-DSC, and PPMS measurements, respectively. The XRD patterns indicated a single-phase cubic spinel structure for all the Ni-Co ferrite samples, regardless of adding sequences of the reactants or NaOH concentration. The analysis of the XRD patterns revealed that the enhancement in lattice constant with increasing NaOH concentration is related to the prevention of oxidization of Co{sup 2+} ions in the Ni-Co ferrite lattice. The FT-IR spectra indicated that samples prepared in the B process have fewer impurities than those prepared in the A process. The enhancement in saturation magnetization with the increase in sodium hydroxide concentration could be attributed to the strengthening of super-exchange interaction between A and B sublattices, due to replacements of Co{sup 3+} ions (magnetic moment of 0 μ{sub B}) by Co{sup 2+} ions (magnetic moment of 3 μ{sub B}) at B sublattices. The obvious increase in the coercivity field with the increase in concentration of NaOH solutions can be interpreted in terms of enhancement of magneto-crystalline anisotropy that originated from gradual substitutions of Co{sup 3+} ions with Co{sup 2+} ions at the octahedral sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and Property Research of Perfluoropolyether Oil-Based Ferrofluid

In this study, perfluoropolyether oil-based ferrofluid was prepared to satisfy special demands in applications which are too harsh to conventional ferrofluids. Fe{sub 3}O{sub 4} magnetic nanoparticles were synthesized by co-precipitation and modified by perfluoropolyether carboxylic acid surfactant in the atmosphere without protective gas. Perfluoropolyether oil-based ferrofluid was prepared with modified nanoparticles and perfluoropolyether by high-energy ball milling. Properties of ferrofluid fabricated were verified through a series of experiments. Ferrofluid stability was tested by interval point-density method; the average density change is merely 0.0077 g/ml, and change rate is 0.37% after 500 days. Saturation magnetization is 582.46 Gs, much larger than the other four ferrofluids. The average volatility rate is 7.4985*10{sup − 5} g/h/cm{sup 2} at 80 °C after 260 h. Viscosity increases to 1825.7 mPa⋅ s under − 20 °C and still have mobility at − 40 °C. The ferrofluid can resist air blast for 8 h under 200 °C without oxidation or decomposition. Perfluoropolyether oil-based ferrofluid cannot be damaged by water or organic solvents. In addition, the ferrofluid can survive in pH = 1 acid or pH = 14 alkali at least 279 days without corrosion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, Spectroscopy, and Magnetic Characterizations of PVP-Assisted Nanoscale Particle

Inverse spinel ferrite of nonmagnetic metal-doped ferro-ferric oxide was synthesized by co-precipitation technique, and its characterizations have been performed by XRD, FTIR, TEM, EDX, VSM, and EPR. XRD figures show the prepared samples in their cubic phase and that their crystallite faces vary from 5.57 to 18.47 nm. FTIR spectra of the as-synthesized samples were performed in the range of 400 and 4000 cm{sup −1} and annealed at 600 {sup ∘}C. The TEM revealed that the syllable construction of the nanoscale particles was agglomerated in their crystalline sample. From VSM study, the sample obtained has a doublet pattern, and ferromagnetic performance was observed from the samples. From EPR spectra, the line shape and the g values obtained for the samples conformed to superparamagnetic resonance due to Mg{sup + 2} ions with a stoichiometric composition. These typical magnetic hypnotic specifications are used for various sensing applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗