SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The frequency and intensity of extreme weather events in North America will likely increase with a changing climate. High resolution simulations are necessary to advance process-based understanding of weather events at local scales accompanying future changes in global atmospheric circulation.
Climate change has resulted in increasingly impactful and more frequent occurrences of extreme weather events. This trend poses a significant challenge for distribution utilities and system operators to ensure that there is uninterrupted power supply to critical loads in their networks under fault scenarios; however, currently, utilities deploying the automated fault location, isolation and restoration (FLISR) function in their advanced distribution management system (ADMS) do not take into account the available generation and load-modification capabilities of distributed energy resources present in the disconnected network due to an upstream isolated fault. This results in the network reconfiguration and restoration to result in sub-optimal load restoration. Therefore, this paper presents two approaches that can upgrade the existing FLISR capabilities of distribution utilities to significantly increase the restoration of critical loads. The performance of the proposed approaches is evaluated on a numerical model of a real distribution feeder in Georgia, USA.
As we plan for a future with higher penetrations of renewables and increasing electrification, it becomes more important to understand how the electricity grid will operate under a variety of weather events. We must also consider that the weather our future grid will experience will be different and possibly more extreme than the historical weather that we have extensive data for. We can use data from global climate models (GCMs) to help understand how our climate may change over the next several decades, but there is often a significant gap between the low-resolution GCM data and the high-resolution weather data required to study power systems under specific weather events. Therefore, our objective in this work is to develop tools that can bridge this gap by using low-resolution GCM data to create realistic high-resolution weather datasets that can be used to study renewable energy generation and electricity demand. To accomplish this objective, we have developed a set of generative machine learning models that can rapidly downscale GCM daily average output data at an approximate grid resolution of 100km to hourly data at an approximate 4 km grid resolution. The models can be used to create high resolution data from nearly any GCM included in the Coupled Model Intercomparison Project (CMIP) Phase 5 or 6. Our methods include all datasets regularly used to study the integration of wind and solar power plants as well as changes in electricity demand due to heating and cooling loads. These models and datasets enable power systems modelers to study climate change-influenced weather events and their impact on the grid. We have downscaled and validated wind, solar, temperature, and humidity data with very promising results. The generative machine learning methods are computationally efficient and produce data that has similar statistical characteristics to current state-of-the-art historical datasets. We have trained initial generative models and produced an initial dataset collectively referred to as Sup3rCC: Super-Resolved Renewable Energy Resource Data with Climate Change Impacts. The data covers a (mostly) historical period from 2015-2025 and a future period from 2050-2059. We have also taken hypothetical high-electrification load data and scaled the heating and cooling loads with respect to the 2050-2059 high-resolution Sup3rCC meteorology. The results show how future levels of renewable energy generation and electrified load may be impacted by climate change, setting the stage for capacity expansion models to consider a dynamic climate through model years.
Commonly, data centers are designed and operated on the assumption of stationarity of the climate. Historical weather data informs the basis of their design and operations. However, as a result of climate change, this assumption is not valid and poses a great risk for data centers. In the coming decades, Northern California’s drought and extreme heat risk is projected to increase significantly. This report provides a drought and extreme heat impacts assessment of data centers in this region. Expert solicitation of data center experts enabled a tailored approach to this report. We identify the climate variables and analytics relevant for assessing data center-specific impacts from extreme heat and drought and demonstrate how to access and understand future climate projections from climate models. We emphasize the importance of including future climate projections into data center design and planning. This report is an important first step towards building an effective extreme heat and drought adaptation strategy for data centers in Northern California. While our geographical focus in this report is Northern California, many findings in this report are broadly applicable.
Climate modelling and analysis are facing new demands to enhance projections and climate information. Here, in this study, we argue that now is the time to push the frontiers of machine learning beyond state-of-the-art approaches, not only by developing machine-learning-based Earth system models with greater fidelity, but also by providing new capabilities through emulators for extreme event projections with large ensembles, enhanced detection and attribution methods for extreme events, and advanced climate model analysis and benchmarking. Utilizing this potential requires key machine learning challenges to be addressed, in particular generalization, uncertainty quantification, explainable artificial intelligence and causality. This interdisciplinary effort requires bringing together machine learning and climate scientists, while also leveraging the private sector, to accelerate progress towards actionable climate science.
Increasing occurrences of extreme weather events such as winter storms and heat waves due to climate change pose enormous safety and health-related risks to people, particularly in economically disadvantaged communities. In this study, we investigate some of the most promising retrofittable and weatherization methods to keep the living zone of residential buildings within an acceptable safety level. We use hours of safety as the resilience metric, which is defined as the time taken by the building's indoor environment to reach a safety threshold temperature. We first identify various passive measures, such as adding extra insulation, improving air sealing, and integrating phase-change materials, which can operate without any external power during winter-storm and heat-wave events. We then employ a whole-building simulation tool to examine the impact of various combinations of retrofit measures and conduct a parametric study to determine the optimal solutions.
Cold-season windstorms represent an important, and potentially changing, geophysical hazard in the Northeastern United States. Here we employ an integrated research methodology including both a storyline approach, where three intense windstorms from the current climate are subjected to pseudo-global warming (PGW) experiments, and a long-term transient simulation using the Weather Research and Forecasting (WRF) model. An ensemble of WRF simulations is built for each windstorm using different planetary boundary layer and microphysical parameterizations. The fidelity assessment suggests all ensemble members capture the windstorm evolution in contemporary climate. The configuration with highest fidelity is used in the PGW experiments performed with perturbed temperature fields, constant relative humidity, and deiced Great Lakes. These perturbation simulations indicate some evidence for a reduction of sea level pressure and increases in wind speed over and downwind of the Great Lakes and over the Atlantic Ocean plus an increase in precipitation accumulation but a reduction in snow coverage. These changes are spatially inhomogeneous in terms of magnitude and sign but are consistent with changes in potential vorticity. Alberta Clippers and Colorado Lows dominate the cyclones responsible for historical windstorms and thus are sampled in the PGW simulations. However, the transient simulation suggests an increasing role for tropical cyclones that undergo transition to extratropical cyclones. Furthermore, this reinforces the value of combining information from both PGW perturbation experiments within a storyline context and transient simulations when seeking to quantify the future risk associated with cold-season windstorms under changing climate.
Urban heat is a growing concern, particularly in dense metropolitan areas where high temperatures increase the risk of heat-related illness and drive energy expenses for cooling. Estimating the effects of urban heat remains a challenge due to limitations in describing the built environment, computational constraints, and the need for high-resolution data. This software presents open-source, computationally efficient machine learning methods that enhance the accuracy of urban temperature estimates compared to historical reanalysis data. Models trained using this software have been applied to urban microclimates in Los Angeles and Seattle showing greater accuracy and less bias when compared to low-resolution reanalysis datasets like ERA5 and even when compared to high-resolution mesoscale numerical weather models like WRF with an urban canopy model. Initial findings highlight how machine learning can support urban heat resilience planning by enabling improved assessments of local heat islands, mitigation strategies, and their energy implications. This software is an extension of (sup3r). This software supports the following publication: Buster, Grant, et al. Tackling Extreme Urban Heat: A Machine Learning Approach to Assess the Impacts of Climate Change and the Efficacy of Climate Adaptation Strategies in Urban Microclimates. arXiv:2411.05952, arXiv, 8 Nov. 2024. arXiv.org, https://doi.org/10.48550/arXiv.2411.05952. And has related public data records available at: Buster, Grant, Cox, Jordan, Benton, Brandon, and King, Ryan. Super-Resolution for Renewable Resource Data and Urban Heat Islands (Sup3rUHI). United States: N.p., 16 Oct, 2024. Web. https://data.openei.org/submissions/6220.
The US buildings sector faces a confluence of challenges, including a clear necessity to decarbonize the built environment to mitigate climate change, a need for greater resilience in the face of more frequent extreme weather events, a dearth of affordable housing, and flat or declining construction productivity that hinders the sector’s ability to adapt. Better data and guidance on new and existing residential buildings can outline paths forward for the market. These can help clarify stakeholder priorities and highlight applications for new (or newly relevant) technologies and approaches that have the potential to break traditional barriers, bridge technical gaps, reduce costs, create added value, and enable decarbonization of the national residential building stock. Decarbonizing the national building stock before 2050 will require massive increases in zero-carbon retrofits and new construction in this decade. By 2030, whole-home retrofit activity must increase several fold, and virtually all new construction will need to be zero carbon. It is difficult to imagine achieving this transformation without substantial changes in how buildings are constructed and retrofitted.
Abstract A recent study found statistically significant differences in extreme precipitation distributions over the contiguous United States (CONUS) when changing the microphysics scheme in a superparameterized global climate model. Here, we repeat the analysis globally and similarly find that differences are widespread when varying the number of predicted moments in the microphysics parameterization, but not when comparing variants of the double‐moment scheme. However, contrary to the previous study in which differences largely disappeared over CONUS when 5‐day simulations were conducted, we found that the signal in these shorter integrations remains within the tropics, implying a direct local effect of microphysics on precipitation extremes in these regions. The effect on precipitation is traced back to changes in vertical velocity profiles changes that are then amplified in the climatological simulations compared to the 5‐day ones. Finally, the superparameterized extremes, regardless of the microphysics scheme, are shown to be larger than those from the Global Precipitation Climatology Project One‐Degree Daily data set and generally smaller than those from the Tropical Rainfall Measuring Mission 3B42 data set.
Abstract Extreme windstorms pose a significant hazard to infrastructure and public safety, particularly in the highly populated US Northeast (NE). However, the influence climate change and changing land use will have on these events remains unclear. A large ensemble generated using the Max-Planck Institute (MPI) Earth system model is used to generate projections of NE windstorms under different shared socioeconomic pathways (SSPs) and to attribute changes to projected land use land cover (LULC) change, externally forced changes and internal climate variability. To reduce the influence of coarse grid cell resolution and uncertainties in surface roughness lengths, windstorms are identified using simultaneous widespread exceedance of local 99th percentile 10 m wind speeds (U 99 ). Projected declines in forest cover in the NE and the resulting reductions in surface roughness length under SSP3-7.0 lead to projections of large increases in U 99 and derived windstorm intensity and scale. However, these projected changes in regional LULC under SSP3-7.0 are unprecedented in a historical context and may not be realistic. After corrections are applied to remove the influence of LULC on wind speeds, regionally averaged U 99 exhibit declines for most of the single model initial-condition large ensemble (SMILE) members which are broadly proportional to the radiative forcing and global air temperature increase in the SSPs, with a median value of −0.15 ms −1 °C −1 . While weak cyclones are projected to decline in frequency in the NE, intense cyclones and the resulting windstorms and indices of socioeconomic loss do not. Where present, significant trends in these loss indices are positive, and some MPI SMILE members generate future windstorms that are unprecedented in the historical period.
Model output from climate projections often requires bias-adjustment to compensate for systematic model errors. A bias-adjustment method for extreme precipitation intensity is proposed that preserves the scaling equation for different accumulation levels from hourly to daily, using intensity-duration-frequency (IDF) modeling. A validation is performed within a pseudo-reality setting, based on hourly precipitation from 28 regional climate model projections of the EURO-CORDEX ensemble over Belgium. The scaling-based adjustment methods improve upon previous methods, an optimal method is identified, and, analytical quantile mapping methods must be avoided due to three identified problems. The ensemble mean of the adjusted extreme precipitation intensity obeys the above-mentioned scale-invariance property, which is consistent with observed extreme intensities. We thus show that IDF modeling provides added value in the context of bias-adjustment, and, that the particular IDF model proposed balances well between accuracy and the preservation of desired properties such as scale invariance and consistency among rainfall durations.
Projected changes in the South American monsoon system by the end of the twenty-first century are analyzed using the Community Earth System Model Large Ensemble (CESM-LENS). The wet season is shorter in LENS when compared to observations, with the mean onset occurring 19 days later and the mean retreat date 21 days earlier in the season. Despite a precipitation bias, the seasonality of rainfall over South America is reproduced in LENS, as well as the main circulation features associated with the development of the South American monsoon. Both the onset and retreat of the wet season over South America are delayed in the future compared to current climate by 3 and 7 days, respectively, with a slightly longer wet season. Central and southeastern Brazil are projected to get wetter as a result of moisture convergence from the strengthening of the South Atlantic low-level jet and a weaker South Atlantic subtropical high. The Amazon is projected to get drier by the end of the century, negatively affecting rain forest productivity. During the wet season, an increase in the frequency and intensity of extreme precipitation events is found over most of South America, and especially over northeastern and southern Brazil and La Plata. Meanwhile, during the dry season an increase in the maximum number of consecutive dry days is found over northeastern Brazil and the northern Amazon.
Heat waves are a well-documented hazard that are projected to increase in intensity, duration, and frequency with climate change. Regions of the US experience widely varying temperatures; for example, 35 °C is extremely hot for spring in the Northeast but not for summer in the Southeast. It is important to evaluate projections within a regional context and at a high enough resolution to understand the risks to populations. We identify heat waves across the Conterminous US (CONUS) under SSP5–8.5 from 2020 to 2059 with an ensemble of dynamically downscaled Coupled Model Intercomparison Project Phase 6 (CMIP6) model outputs. We demonstrate that there are regional differences caused by seasonal and local drivers of persistent hot temperatures. Summer heat waves are increasing in intensity and duration faster than winter heat waves because of the atmospheric conditions that promote these events. Our analysis emphasizes the value of fine-resolution modeling for projecting future climate risks.
The National Renewable Energy Laboratory (NREL) offers many forms of technical assistance for Tribes to support local clean energy priorities and challenges. With broad support from the U.S. Department of Energy (DOE) and local partners, NREL provides technical expertise to enable data-driven, informed clean energy decision making. Technical assistance may address energy strategy, project financing, policy design and development, data analysis, economic development, infrastructure planning, energy justice, climate change, resilience, or other energy priorities. NREL has a long history of partnering with Tribes and Tribal organizations, including in Alaska Native Villages where the extreme Arctic climate poses unique energy challenges. NREL works directly with Tribes to find solutions that address their self-defined energy priorities, challenges, and goals.
Abstract. Predicting future climate change over a region of complex terrain, such as the western United States (US), remains challenging due to the low resolution of global climate models (GCMs). Yet the climate extremes of recent years in this region, such as floods, wildfires, and drought, are likely to intensify further as climate warms, underscoring the need for high-quality and high-resolution predictions. Here, we present an ensemble of dynamically downscaled simulations over the western US from 1980–2100 at 9 km grid spacing, driven by 16 latest-generation GCMs. This dataset is titled the Western US Dynamically Downscaled Dataset (WUS-D3). We describe the challenges of producing WUS-D3, including GCM selection and technical issues, and we evaluate the simulations' realism by comparing historical results to temperature and precipitation observations. The future downscaled climate change signals are shaped in physically credible ways by the regional model's more realistic coastlines and topography. (1) The mean warming signals are heavily influenced by more realistic snowpack. (2) Mean precipitation changes are often consistent with wetting on the windward side of mountain complexes, as warmer, moister air masses are uplifted orographically during precipitation events. (3) There are large fractional precipitation increases on the lee side of mountain complexes, leading to potentially significant changes in water resources and ecology in these arid landscapes. (4) Increases in precipitation extremes are generally larger than in the GCMs, driven by locally intensified atmospheric updrafts tied to sharper, more realistic gradients in topography. (5) Changes in temperature extremes are different from what is expected by a shift in mean temperature and are shaped by local atmospheric dynamics and land surface feedbacks. Because of its high resolution, comprehensiveness, and representation of relevant physical processes, this dataset presents a unique opportunity to evaluate societally relevant future changes in western US climate.
The climate is changing so rapidly that climatologies based on historical statistics cannot reliably capture the current risk of extreme weather events hazardous to society. Decision relevant projections of weather extreme probability over the next 10–15 years are needed to enable adaptation and resilience in the face of this evolving risk. Current weather forecasts/predictions and long-term climate projections for decades into the future are inadequate for providing this information to stakeholders that need it, targeting forecast horizons either too short or too far into the future. We argue that a new approach is needed: climate nowcasting. Climate nowcasting would focus on user-inspired extreme metrics over the next 10–15 year time frame, targeting specific impacts and locations down to a local scale, by engaging with stakeholders to understand their needs and provide information in a format relevant for decision making. Importantly, climate nowcasting will not consist of a single approach or data set, involving rather data fusion from different sources of information: simulations, observations and data driven methods, likely through different weights depending on the metric of interest. Predictions must be accompanied by serious engagement with stakeholders facing climate risks, and clearly present uncertainties and limitations of any prediction. Such a vision is very different from how typical climate or weather forecasts are applied today.
Tropical cyclones intensified globally in recent decades, delivering extreme precipitation deeper inland. While much research has focused on the role of climate change in tropical cyclone intensification, less is known about their contribution to groundwater recharge, especially in arid regions where freshwater is scarce and aquifers are being depleted. Here we quantify cyclone-driven groundwater recharge across the Arabian Peninsula from 2002 to 2021 using satellite-based total water storage and hydrodynamic modeling. Findings show that cyclones contributed up to 60% of total precipitation in the southern Arabian Peninsula. Cyclone Mekunu (2018) alone delivered 30 km 3 of precipitation inland, resulting in a net groundwater recharge of 3.2 ± 1.2 km 3 in the Najd subbasin. These findings reveal that tropical cyclones play a crucial role in replenishing groundwater resources in arid regions. Our approach provides a framework for quantifying recharge in ungauged arid basins worldwide, offering valuable insights for climate-resilient water resource management.