SEARCH · Search NASA
Results for “Comparative Analysis”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Estimating Near-Surface Air Temperature from Satellite-Derived Land Surface Temperature Using Temporal Deep Learning: A Comparative Analysis
Not Available
Optimizing Grid Regulation With Gravity Storage Systems: A Comparative Analysis With Different Motor Inertias
The integration of renewable energy sources into power grids necessitates solutions for grid support and stability during fluctuations in electricity generation and demand. Gravity energy storage systems (GESS) are emerging as a promising technology for managing the balance between energy supply and demand. However, their capacity to optimize energy flow and offer voltage and frequency regulation amid imbalances in generation and demand is less reported. This paper investigates the control of GESS for optimizing energy flow during voltage and frequency regulation. The study evaluates the regulation capabilities of GESS with different motor inertias during a Texas grid event: one with a high-speed, low-inertia motor and another with a low-speed, high-inertia motor. Results indicate that both GESS scenarios provide fast frequency response by converting potential energy into kinetic energy and vice versa, with a response time of 1.5 s from the frequency variation. This aligns with grid requirements for primary frequency response from traditional synchronous generators and motors with large inertia. Furthermore, a GESS based on a high-inertia motor may be able to operate over a broader range of frequency variations, whereas a low-inertia system may be limited by thermal constraints of the motor.
Comparative Analysis of Experimental DC Arc Flash Results to Industry Estimation Methods
Not Available
Comparative Analysis of Time-Series Studies and Transient Simulations for Impact Assessment of PV Integration on Reduced IEEE 8500 Node Feeder
Abstract not provided
Comparative Analysis of State and Parameter Estimation Techniques for Power System Frequency Dynamics.
Abstract not provided.
Advancements in Superconducting Electric Propulsion: Comparative Analysis and Progress Update of CHEETA and CRUISE Motors
Not Available
Critical Comparative Analysis of Measurement Based Centralized Online Voltage Stability Indices
Not provided.
Transgenic switchgrass ( Panicum virgatum L.) targeted for reduced recalcitrance to bioconversion: A two-year comparative analysis of field-grown lines modified for target gene or genetic element expression
Five different types of transgenic ( GAUT4 , miRNA, MYB4, COMT and FPGS ) Panicum virgatum L. (switchgrass) were grown in a field in Knoxville, Tenn., USA over two consecutive years between 2011 and 2015 in separate experiments. Clonal replicates were established (year-one) and produced much greater biomass during the second year. After each growing season the above ground biomass was analyzed for cell wall sugars and for recalcitrance to enzymatic digestibility, and biofuel using a separate hydrolysis and fermentation (SHF) screen. Here, each transgenic event and control had more glucan, xylan and less ethanol (g/g basis) from the second year of growth relative to the first year plants. There was no correlation between plant carbohydrate content and biofuel production. In each of cell wall-targeted transgenics, GAUT4 , MYB4, COMT and FPGS , the second year of growth resulted in increased carbohydrate abundance (up to 12%) and reduced recalcitrance through higher ethanol yields (up to 21%) over the non-transgenic control plants.
Comparative Analysis of Direct and Indirect Cooling of Wide-Bandgap Power Modules and Performance Enhancement of Jet Impingement-Based Direct Substrate Cooling
With the development of high-power and high-torque machines, requirements for high-power density electronics are increasing. Thermal management of such systems requires high heat extraction. Conventional air cooling based heat sinks and cold plate based liquid cooling have their own benefits for various applications but has limitations for high power density applications. The current study explores a jet impingement based direct substrate cooling system that was implemented for a SiC based direct bonded Cu substrate for various power losses. Numerical comparison between jet impingement cooling and conventional horizontal/indirect cooling (pin fin heat sink and genetic algorithm-optimized heat sink) showed that the area weighted average of the heat transfer coefficient (HTC) is high for both horizontal cooling designs, and the local HTC is higher for jet impingement. Design iterations were undertaken to resolve the bottleneck of this cooling system. Increasing the number of nozzles helped to cover more area at the direct bonded Cu bottom plate, which drops the chip temperature considerably. With a constant flow rate, increasing the number of nozzles would decrease local jet velocity, which reduces the heat extraction by jet impingement. This issue can be addressed by reducing the diameter of nozzle but doing so results in a high pressure drop where the design constraint is 2 psi. A flared nozzle design is proposed, which has a higher spreading angle of the jet that increases the flow coverage and reduces the pressure drop of the coolant loop.
Comparative analysis of the physicochemical characteristics of SiO{sub 2} aerogels prepared by drying under subcritical and supercritical conditions
SiO{sub 2}-based aerogels have been produced be removing a solvent (ethanol or hexafluoroisopropanol) from lyogels both above and below the critical temperature of the alcohols (in the range 210–260 and 160–220°C, respectively). The resultant materials have been characterized by low-temperature nitrogen adsorption measurements, X-ray diffraction, thermal analysis, scanning electron microscopy, X-ray microanalysis, and small-angle and ultrasmall-angle neutron scattering. The results demonstrate that removing the solvent 20–30°C below the critical temperature of the solvent yields silica that is characterized by higher specific porosity and has the same or a larger specific surface area in comparison with the aerogels produced by drying under supercritical conditions. The nature of the solvent used and the solvent removal temperature influence the size and aggregation behavior of primary clusters and the cluster aggregate size in the aerogels.
A Comparative Analysis of Catalysts for the Preparation of Germanium through Hydrogen Reduction of Germanium Tetrachloride
We have synthesized catalysts for the hydrogen reduction of germanium tetrachloride: a catalyst based on multiwalled carbon nanotubes and a hybrid catalyst based on multiwalled carbon nanotubes whose surface was decorated with copper-containing nanoparticles. The hybrid catalyst has been characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The results demonstrate that it consists of multiwalled carbon nanotubes whose surface is decorated with copper nanoparticles in a cuprous oxide shell (Cu{sub 2}O/Cu/MWCNTs). The catalytic activity of the hybrid catalyst exceeds that of the as-prepared MWCNTs. The use of the Cu{sub 2}O/Cu/MWCNT hybrid catalyst as a catalyst for the hydrogen reduction of germanium tetrachloride allows the reaction temperature to be lowered and ensures 95.7% germanium tetrachloride conversion at 873 K.
Comparative analysis of the narrow resonances
Several narrow resonance features in the system of two K{sub S} mesons were found on the basis of experimental data obtained by using the 6-m spectrometer of the Institute of Theoretical and Experimental Physics (ITEP, Moscow). Three resonances, X(1070), X(1545), and f{sub J}(2220), are considered in the present study. An interference with the background is observed for the X(1545) resonance. It is shown that X(1070) and f{sub J}(2220) resonances are produced under nearly identical kinematical conditions characterized by high transverse momenta and the production of accompanying extra pions.
Mechanisms of neutrinoless double-beta decay: A comparative analysis of several nuclei
The neutrinoless double beta decay of several nuclei that are of interest from the experimental point of view ({sup 76}Ge, {sup 82}Se, {sup 100}Mo, {sup 130}Te, and {sup 136}Xe) is investigated on the basis of a general Lorentzinvariant effective Lagrangian describing physics effects beyond the Standard Model. The half-lives and angular-correlation coefficients for electrons are calculated for various decay mechanisms associated, in particular, with the exchange of Majorana neutrinos, supersymmetric particles (with R-parity violation), leptoquarks, and right-handed W{sub R} bosons. The effect of theoretical uncertainties in the values of relevant nuclear matrix elements on decay features is considered.
Comparative analysis of proton and pion scattering on the isotopes {sup 6,8}He within Glauber theory
The differential cross sections for p{sup 6,8}He and p{sup 6,8}He scattering at the RIKEN andGSI energies (0.073 and 0.7 GeV per nucleon) were calculated on the basis of Glauber theory. Pion and proton interaction with a nucleus is determined by the multiple-scattering series (Glauber operator), so that various collision multiplicities and their contributions to the summed cross section can be taken into account. The use of the α-n-n wave function for {sup 6}He and the wave function on the basis of the large-scale shell model (LSSM) for {sup 8}He makes it possible to calculate analytically scattering matrix elements.
Comparative analysis of the mechanisms of interface formation in a film structure under equilibrium and strongly nonequilibrium condition
Structural (X-ray and electron diffraction) investigations of the interface in films of (Zn {sub 1-x} Cd{sub x}Te) {sub 1-y} (In{sub 2}Te{sub 3}) {sub y} alloys and zinc selenide grown on glass substrates under strongly nonequilibrium (substrate temperature T{sub s} = 200 K) and quasi-equilibrium (T{sub s} = 473 K) conditions have been performed. It is shown that growth of alloy films occurs through formation of nuclei of different shape and orientation. It is established that the alloy films grown on a cooled substrate have better (with respect to crystalline orientation) structural quality in comparison with similar films grown on a heated substrate, where Ostwald ripening plays an important role during growth.