Search NASA⌕ Search

SEARCH · Search NASA

Results for “Competitive diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Implementation of Ion Exchange Processes for Carbon Dioxide Mineralization Using Industrial Waste Streams

Sequestration of CO 2 within stable mineral carbonates (e.g., CaCO 3 ) represents an attractive emission reduction strategy because it offers a leakage-free alternative to geological storage of CO 2 in an environmentally benign form. However, the pH of aqueous streams equilibrated with gaseous streams containing CO 2 (pH < 4) are typically lower than that which is required for carbonate precipitation (pH > 8). Traditionally, alkalinity is provided by a stoichiometric reagent (e.g., NaOH) which renders these processes environmentally hazardous and economically unfeasible. This work investigates the use of regenerable ion-exchange materials to induce alkalinity in CO 2 -saturated aqueous solutions such that the pH shift required for mineralization occurs without the need for stoichiometric reagents. Na + -H + exchange isotherms (at [H + ] = 10 −8 –10 −1 M) and rates were measured for 13X and 4A zeolites and TP-207 and TP-260 organic exchange resins in batch equilibrium and fixed-bed exchange experiments, respectively. At solutions equilibrated with CO 2 at 1.0 atm (pH = 3.9), H + exchange capacities for the materials were similar (1.7–2.4 mmol H + /g material) and resulted in pH increases from 3.9 to greater than 8.0. Multi-component mixtures using Ca 2+ and Mg 2+ cations (at 10 −3 –10 −1 M) in CO 2 -saturated water were used to probe competitive ion exchange. The presence of divalent cations in solution inhibited H + exchange, reducing capacities to as low as 0.2 mmol H + /g for both resins and zeolites. Dynamic H + exchange capacities in fixed-bed ion exchange columns were similar to equilibrium values for resins (∼1.5 mmol/g) and zeolites (∼0.8 mmol/g) using inlet solutions that were equilibrated with gaseous streams of CO 2 at 1.0 atm. However, exchange kinetics were limited by intraparticle diffusion as indicated by the increased rate parameters with increasing inlet flow rates (20–160 cm 3 min −1 ). Experimental calcite precipitation from mixing the alkaline CO 3 2− -rich water solution obtained from the ion-exchange column with a simulated liquid waste stream solution achieved thermodynamic maximum yields. The results from these studies indicate that ion exchange processes can be used as an alternative to the addition of stoichiometric bases to induce alkalinity for the precipitation of CaCO 3 , thereby opening a pathway toward sustainable and economic mineralization processes.

42 ENGINEERING↗

The mimetic finite difference method for elliptic and parabolic problems with a staggered discretization of diffusion coefficient

Numerical schemes for nonlinear parabolic equations based on the harmonic averaging of cell-centered diffusion coefficients break down when some of these coefficients go to zero or their ratio grows. To tackle this problem, we propose new mimetic finite difference schemes that use a staggered discretization of the diffusion coefficient. The primary mimetic operator approximates div (k•); the derived (dual) mimetic operator approximates - ∇(•). The new mimetic schemes preserve symmetry and positive-definiteness of the continuum problem which allows us to use algebraic solvers with optimal complexity. We perform detailed numerical analysis of the new schemes for linear elliptic problems and a specially designed linear parabolic problem that has solution dynamics typical for nonlinear problems. We also show that the new schemes are competitive with the state-of-the-art schemes for steady-state problems but provide much more accurate solution dynamics for the transient problem.

97 MATHEMATICS AND COMPUTING↗

ON THE FORMATION OF CO{sub 2} AND OTHER INTERSTELLAR ICES

We investigate the formation and evolution of interstellar dust-grain ices under dark-cloud conditions, with a particular emphasis on CO{sub 2}. We use a three-phase model (gas/surface/mantle) to simulate the coupled gas-grain chemistry, allowing the distinction of the chemically active surface from the ice layers preserved in the mantle beneath. The model includes a treatment of the competition between barrier-mediated surface reactions and thermal-hopping processes. The results show excellent agreement with the observed behavior of CO{sub 2}, CO, and water ice in the interstellar medium. The reaction of the OH radical with CO is found to be efficient enough to account for CO{sub 2} ice production in dark clouds. At low visual extinctions, with dust temperatures {approx}>12 K, CO{sub 2} is formed by direct diffusion and reaction of CO with OH; we associate the resultant CO{sub 2}-rich ice with the observational polar CO{sub 2} signature. CH{sub 4} ice is well correlated with this component. At higher extinctions, with lower dust temperatures, CO is relatively immobile and thus abundant; however, the reaction of H and O atop a CO molecule allows OH and CO to meet rapidly enough to produce a CO:CO{sub 2} ratio in the range {approx}2-4, which we associate with apolar signatures. We suggest that the observational apolar CO{sub 2}/CO ice signatures in dark clouds result from a strongly segregated CO:H{sub 2}O ice, in which CO{sub 2} resides almost exclusively within the CO component. Observed visual-extinction thresholds for CO{sub 2}, CO, and H{sub 2}O are well reproduced by depth-dependent models. Methanol formation is found to be strongly sensitive to dynamical timescales and dust temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrifying Critical Mineral Refinement in the US (CRADA Final Report)

The technical founder of Aepnus Technology Inc. was competitively selected for support by Cyclotron Road, a U.S. Department of Energy (DOE) Lab-Embedded Entrepreneurship Program (LEEP) through an approved merit review process. Through this program, Aepnus Technology has collaborated with Lawrence Berkeley National Laboratory (LBNL) to develop and validate a novel electrolysis platform targeting the recycling of sodium sulfate waste, a pervasive byproduct in the battery supply chain. The platform aims to address inefficiencies in conventional electrolysis by leveraging Aepnus' proprietary gas diffusion electrode (GDE) technology, which replaces precious metal catalysts, such as iridium, to achieve high efficiency, reduced operational costs, and enhanced durability.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Meridional distribution of stratospheric trace constituents

Vertically stratified tracers such as methane and nitrous oxide tend to have constant mixing ratio surfaces that slope downward toward the poles in the meridional plane. The equilibrium tracer slope results from the competition between the slope steepening effects of advection by the diabatic circulation and the slope flattening effects of quasi-isentropic eddy transport and photochemical loss. The diabatic circulation iself is, however, driven primarily by eddy transports, which maintain the departure of stratospheric temperatures from radiative equilibrium. If the eddy transports are weak, the diabatic circulation is also weak and the slope is small. Using a simple beta-plane channel model and an eddy diffusion parameterization for the eddy potential vorticity and tracer transports, it is shown that the slope is a maximum for a value of eddy diffusion such that the dynamical time scale lies between the radiative and chemical time scales.

Holton, J. R.↗

Light Microsopy Module, International Space Station Premier Automated Microscope

The Light Microscopy Module (LMM) was launched to the International Space Station (ISS) in 2009 and began science operations in 2010. It continues to support Physical and Biological scientific research on ISS. During 2015, if all goes as planned, five experiments will be completed: [1] Advanced Colloids Experiments with a manual sample base -3 (ACE-M-3), [2] the Advanced Colloids Experiment with a Heated Base -1 (ACE-H-1), [3] (ACE-H-2), [4] the Advanced Plant Experiment -03 (APEX-03), and [5] the Microchannel Diffusion Experiment (MDE). Preliminary results, along with an overview of present and future LMM capabilities will be presented; this includes details on the planned data imaging processing and storage system, along with the confocal upgrade to the core microscope. [1] New York University: Paul Chaikin, Andrew Hollingsworth, and Stefano Sacanna, [2] University of Pennsylvania: Arjun Yodh and Matthew Gratale, [3] a consortium of universities from the State of Kentucky working through the Experimental Program to Stimulate Competitive Research (EPSCoR): Stuart Williams, Gerold Willing, Hemali Rathnayake, et al., [4] from the University of Florida and CASIS: Anna-Lisa Paul and Rob Ferl, and [5] from the Methodist Hospital Research Institute from CASIS: Alessandro Grattoni and Giancarlo Canavese.

Microscopy↗

Simulations of laminar flame propagation in droplet mists

In order to clarify the conditions conducive to propagation of premixed flames in quiescent sprays, a one-dimensional code with detailed chemistry and transport was used. n-Heptane and n-decane, distinguished by their volatility, were studied under atmospheric and low temperature, low pressure conditions. The effects of initial droplet diameter, overall equivalence ratio {phi}{sub 0} and droplet residence time before reaching the flame front were examined. Increasing the residence time had an effect only for n-heptane, with virtually no evaporation occurring before the flame front for n-decane. The trends were only marginally correlated with the local gaseous equivalence ratio {phi}{sub eff} at the location of maximum heat release rate. {phi}{sub eff} could be as low as 0.4 (beyond the lean flammability limit), but the flame speed could still be 40% of the gaseous stoichiometric flame speed S{sub L,0}. For n-heptane, {phi}{sub eff} increased towards {phi}{sub 0} with smaller droplets while high flame speeds occurred when {phi}{sub eff} was near 1. This implied that the highest flame speed was achieved with small droplets for {phi}{sub 0} {<=} 1 and with relatively large droplets for {phi}{sub 0} > 1. In the latter case, the oxidiser was completely consumed in the reaction zone and droplets finished evaporating behind the flame where the fuel was pyrolysed. The resulting small species, mainly C{sub 2}H{sub 2}, C{sub 2}H{sub 4} and H{sub 2}, diffused back to the oxidation zone and enhanced the reaction rate there. Ultimately, this could result in flame speeds higher than S{sub L,0} even with {phi}{sub 0} = 4. For n-decane, the same trends were followed but smaller droplets were needed to reach the same {phi}{sub eff} due to the slow evaporation rate. Under low pressure and low temperature, the effects of pressure and temperature on {phi}{sub eff} and the flame speed were competitive and resulted in values close to the ones at atmospheric conditions. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Identifying Dynamic Structural Changes of Active Sites in Pt–Ni Bimetallic Catalysts Using Multimodal Approaches

Alloy nanoparticle catalysts are known to afford unique activities that can differ markedly from their parent metals, but there remains a generally limited understanding of the nature of their atomic (and likely dynamic) structures as exist in heterogeneously supported forms under reaction conditions. Notably unclear is the nature of their active sites and the details of the varying oxidation states and atomic arrangements of the catalytic components during chemical reactions. In this work, we describe multimodal methods that provide a quantitative characterization of the complex heterogeneity present in the chemical and electronic speciations of Pt–Ni bimetallic catalysts supported on mesoporous silica during the reverse water gas shift reaction. The analytical protocols involved a correlated use of in situ X-ray Absorption Spectroscopy (XAS) and Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), complimented by ex-situ aberration corrected Scanning Transmission Electron Microscopy (STEM). The data reveal that complex reactions occur between the metals and support in this system under operando conditions. These reactions, and the specific impacts of strong metal–silica bonding interactions, prevent the formation of alloy phases containing Ni–Ni bonds. This feature of structure provides high activity and selectivity for the reduction of CO 2 to carbon monoxide without significant competitive levels of methanation. In conclusion, we show how these chemistries evolve to the active state of the catalyst: bimetallic nanoparticles possessing an intermetallic structure (the active phase) that are conjoined with Ni-rich, metal-silicate species.

36 MATERIALS SCIENCE↗

Magnetic order and interactions in ferrimagnetic Mn 3 Si 2 Te 6

The magnetism in Mn 3 Si 2 Te 6 has been investigated using thermodynamic measurements, first principles calculations, neutron diffraction and diffuse neutron scattering on single crystals. These data con rm that Mn3Si2Te6 is a ferrimagnet below T C 78 K. The magnetism is anisotropic, with magnetization and neutron diffraction demonstrating that the moments lie within the basal plane of the trigonal structure. The saturation magnetization of 1.6 B/Mn at 5K originates from the different multiplicities of the two antiferromagnetically-aligned Mn sites. First principles calculations reveal antiferromagnetic exchange for the three nearest Mn-Mn pairs, which leads to a competition between the ferrimagnetic ground state and three other magnetic configurations. The ferrimagnetic state results from the energy associated with the third-nearest neighbor interaction, and thus long- range interactions are essential for the observed behavior. Di use magnetic scattering is observed around the 002 Bragg reflection at 120 K, which indicates the presence of strong spin correlations well above T C . These are promoted by the competing ground states that result in a relative suppression of T C , and may be associated with a small ferromagnetic component that produces anisotropic magnetism below ≈ 330 K.

36 MATERIALS SCIENCE↗

VUV PHOTO-PROCESSING OF PAH CATIONS: QUANTITATIVE STUDY ON THE IONIZATION VERSUS FRAGMENTATION PROCESSES

Interstellar polycyclic aromatic hydrocarbons (PAHs) are strongly affected by the absorption of vacuum ultraviolet (VUV) photons in the interstellar medium (ISM), yet the branching ratio between ionization and fragmentation is poorly studied. This is crucial for the stability and charge state of PAHs in the ISM in different environments, affecting in turn the chemistry, the energy balance, and the contribution of PAHs to the extinction and emission curves. We studied the interaction of PAH cations with VUV photons in the 7–20 eV range from the synchrotron SOLEIL beamline, DESIRS. We recorded by action spectroscopy the relative intensities of photo-fragmentation and photo-ionization for a set of eight PAH cations ranging in size from 14 to 24 carbon atoms, with different structures. At photon energies below ∼13.6 eV fragmentation dominates for the smaller species, while for larger species ionization is immediately competitive after the second ionization potential (IP). At higher photon energies all species behave similarly; the ionization yield gradually increases, leveling off between 0.8 and 0.9 at ∼18 eV. Among isomers, PAH structure appears to mainly affect the fragmentation cross section but not the ionization cross section. We also measured the second IP for all species and the third IP for two of them; all are in good agreement with theoretical ones, confirming that PAH cations can be further ionized in the diffuse ISM. Determining actual PAH dication abundances in the ISM will require detailed modeling. Our measured photo-ionization yields for several PAH cations provide a necessary ingredient for such models.

79 ASTRONOMY AND ASTROPHYSICS↗

Technetium Getters to Improve Cast Stone Performance

The cementitious material known as Cast Stone has been selected as the preferred waste form for solidification of aqueous secondary liquid effluents from the Hanford Tank Waste Treatment and Immobilization Plant (WTP) process condensates and low-activity waste (LAW) melter off-gas caustic scrubber effluents. Cast Stone is also being evaluated as a supplemental immobilization technology to provide the necessary LAW treatment capacity to complete the Hanford tank waste cleanup mission in a timely and cost effective manner. Two radionuclides of particular concern in these waste streams are technetium-99 (99Tc) and iodine-129 (129I). These radioactive tank waste components contribute the most to the environmental impacts associated with the cleanup of the Hanford site. A recent environmental assessment of Cast Stone performance, which assumes a diffusion controlled release of contaminants from the waste form, calculates groundwater in excess of the allowable maximum permissible concentrations for both contaminants. There is, therefore, a need and an opportunity to improve the retention of both 99Tc and 129I in Cast Stone. One method to improve the performance of Cast Stone is through the addition of “getters” that selectively sequester Tc and I, therefore reducing their diffusion out of Cast Stone. In this paper, we present results of Tc and I removal from solution with various getters with batch sorption experiments conducted in deionized water (DIW) and a highly caustic 7.8 M Na Ave LAW simulant. In general, the data show that the selected getters are effective in DIW but their performance is comprised when experiments are performed with the 7.8 M Na Ave LAW simulant. Reasons for the mitigated performance in the LAW simulant may be due to competition with Cr present in the 7.8 M Na Ave LAW simulant and to a pH effect.

Cast Stone↗

Elucidating the Solvation Structure and Dynamics of Lithium Polysulfides Resulting from Competitive Salt and Solvent Interactions

Designing optimal electrolytes is key to enhancing the performance of energy storage devices,especially relating to cycle life, efficiency, and stability.1 Specifically, for future beyond-Li ion energy storage, there is still ample room for electrolyte improvements. Among the candidates for higher gravimetric energy storage, the Li-S battery is considered quite promising, owing to its theoretical specific energy density (2600 Wh/kg) and specific capacity (1675 mAh/g) and significantly lower cost as compared to state-of-art lithium-ion batteries.

36 MATERIALS SCIENCE↗

Structural, Chemical, and Dynamical Frustration: Origins of Superionic Conductivity in closo -Borate Solid Electrolytes

Li 2 B 12 H 12 , Na 2 B 12 H 12 , and their closo-borate relatives exhibit unusually high ionic conductivity, making them attractive as a new class of candidate electrolytes in solid-state Li- and Na-ion batteries. However, further optimization of these materials requires a deeper understanding of the fundamental mechanisms underlying ultrafast ion conduction. To this end, we use ab initio molecular dynamics simulations and density-functional calculations to explore the motivations for cation diffusion. We find that superionic behavior in Li 2 B 12 H 12 and Na 2 B 12 H 12 results from a combination of key structural, chemical, and dynamical factors that introduce intrinsic frustration and disorder. A statistical metric is used to show that the structures exhibit a high density of accessible interstitial sites and site types, which correlates with the flatness of the energy landscape and the observed cation mobility. Furthermore, cations are found to dock to specific anion sites, leading to a competition between the geometric symmetry of the anion and the symmetry of the lattice itself, which can facilitate cation hopping. Finally, facile anion reorientations and other low-frequency thermal vibrations lead to fluctuations in the local potential that enhance cation mobility by creating a local driving force for hopping. In conclusion, we discuss the relevance of each factor for developing new ionic conductivity descriptors that can be used for discovery and optimization of closo-borate solid electrolytes, as well as superionic conductors more generally.

25 ENERGY STORAGE↗

Poisoning and competitive adsorption effects during phenol hydrogenation on platinum in water-alcohol mixtures

Here the effect of other bio-oil components on the aqueous phase hydrogenation of phenol on a Pt/C catalyst was investigated at a temperature of 353 K and a total pressure of 250 psi. Cyclohexanone and cyclohexanol were primary products; cyclohexanone was further converted to cylcohexanol. Methanol or ethanol as additives in water could completely stop ring hydrogenation in phenol (and in other test compounds: benzene, toluene) and decelerated the hydrogenation of cyclohexanone. Formic acid also suppressed hydrogenation reactions. The poisoning effect resulted from CO, formed by decomposition of alcohols or formic acid on platinum. Ab initio density-functional theory calculations afforded adsorption geometries, binding energies and diffusion barriers of relevant species. Phenol hydrogenation on platinum is more susceptible to CO poisoning than cyclohexanone hydrogenation because it needs a large ensemble site. The poisoning effect of alcohols can be avoided by mixing the components in a specific order.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Co-Based superalloy morphology evolution: A phase field study based on experimental thermodynamic and kinetic data

Cobalt-based superalloys with two phase $\gamma$/$\gamma '$ microstructures offer great promise as candidates for next-generation high-temperature alloys for applications, such as turbine blades. It is essential to understand the thermodynamic and kinetic factors that influence the microstructural evolution of these alloys in order to optimize the alloy compositions and processing steps with a goal to improve their coarsening, creep and rafting behavior. We are using a continuum phase field approach to study the diffusion process and to predict the equilibrium shapes of Co-Al-W $\gamma '$ precipitates. In order to obtain quantitatively predictive capabilities, we extract chemical free energies for the $\gamma$/$\gamma '$ phases based on CALculation of PHAse Diagrams (CALPHAD) thermodynamic data and diffusion mobilities for Co alloys based on CALPHAD kinetic data. We also use experimental or first-principles data for other quantities, such as misfit strain and interface information, for the parameterization of our model. A particular focus of our study is to understand how different energy balances, misfit strain and kinetics affect the coarsening and rafting behavior of $\gamma '$ precipitates, and the sensitivity of the final precipitate shape to materials parameters. Here, we find that the equilibrium shape of the precipitate results from a delicate competition between chemical, interfacial, and elastic energies, and it is very sensitive to changes in model parameters. Here, we examine how modeling input parameters affect the equilibrium shape of precipitates and relate these parameters to experimentally available values.

36 MATERIALS SCIENCE↗

Charge segregation in weakly ionized microgels

Here we investigate microgels synthesized from N-isopropylacrylamide (NIPAM) copolymerized with a large mol% of acrylic acid, finding that when the acid groups are partially ionized at high temperatures, competition between ion-induced swelling and hydrophobic deswelling of poly(NIPAM) chains results in microphase separation. In cross-linked microgels, this manifests as a dramatic decrease in the ratio between the radius of gyration and the hydrodynamic radius to ~0.2, indicating that almost all the mass of the microgel is concentrated near the particle center. We also observe a concurrent decrease of the polymer network length scale via small-angle neutron scattering, confirming the presence of a dense, deswollen core surrounded by a diffuse, charged periphery. We compare these results to those obtained for a system of charged ultralow-cross-linked microgels; the form factor shows a distinct peak at high q when the temperature exceeds a threshold value. Lastly, we successfully fit the form factor to theory developed to describe scattering from weakly charged gels in poor solvents, and we tie this behavior to charge segregation in the case of the cross-linked microgels.

59 BASIC BIOLOGICAL SCIENCES↗

Driven electrostatic phase space vortices in a 1D weakly dissipative Vlasov–Poisson system

In this paper, the effect of collisions on driven electrostatic phase space vortices is analyzed by means of Eulerian simulation for two different collision models. It was demonstrated recently that in the absence of collisions, at late times, steady state phase space vortices manifest to form a plateau in the resonant region of the particle velocity distribution function, due to trapping of particles supporting multiextrema giant phase space vortices (PSVs). In the presence of collisions, over long time, this multiextrema plateau are found to smooth out, since collisions drive the velocity distribution toward Maxwellian, irrespective of how weak the collisions are as long as they are non-zero. In these conditions, kinetic processes and collisionality are found to be in competition, and the evolution of the plasma is found, therefore, to be a result of nontrivial combination of these two effects. An attempt has been made by means of numerical simulations to study the effect of weak collisionality on the electrostatic driven phase space vortices with two types of collision operators: (1) Bhatnagar–Gross–Krook (Krook) collision operator, where the colliding particles can be treated as isolated pairs and, (2) Fokker–Planck (FP) type collision operator (Zakharov–Karpman) in one dimension, where many weak collisions lead to particle diffusion in velocity space. It is shown that depending on the collision model used, the nature of smoothing in velocity space of giant PSVs results in qualitatively very different phase space structures. However, irrespective of the collision model used, excess density fractions over 10% are retained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗