Search NASA⌕ Search

SEARCH · Search NASA

Results for “Completion Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Rotor transient analysis

Undamped modes approximate dynamic behavior of rotors and bearings. Application of modal analysis to uncouple equations of motion simplifies stability, steady-state unbalance response, and transient response analysis of system; nonlinear stability is predicted from calculated frequency spectra. Analysis provides designers with complete information without involving large-scale computational costs. Programs are written in FORTRAN IV for use on CDC 6600 computer.

Allaire, P. E.↗
NASA NTRS1980

Design and fabrication of titanium multi-wall Thermal Protection System (TPS) test panels

A titanium multiwall thermal protection system panel was designed. The panel is a nine sheet sandwich structure consisting of an upper and lower face sheet; four dimpled sheets, three septum sheets, and clips for attachment to a vehicle structure. An acceptable fabrication process was developed, and the panel design was verified through mechanical and thermal testing of component specimens. A design was completed which takes into consideration fabrication techniques, thermal properties, mechanical properties, and materials availability.

Blair, W.↗
NASA NTRS1980

Analysis and identification of subsynchronous vibration for a high pressure parallel flow centrifugal compressor

The summary of a complete analytical design evaluation of an existing parallel flow compressor is presented and a field vibration problem that manifested itself as a subsynchronous vibration that tracked at approximately 2/3 of compressor speed is reviewed. The comparison of predicted and observed peak response speeds, frequency spectrum content, and the performance of the bearing-seal systems are presented as the events of the field problem are reviewed. Conclusions and recommendations are made as to the degree of accuracy of the analytical techniques used to evaluate the compressor design.

Kirk, R. G.↗
NASA NTRS1981

Design of a V/STOL propulsion system for a large-scale fighter model

Modifications were made to the existing Large-Scale STOL fighter model to simulate a V/STOL configuration. Modifications include the substitutions of two dimensional lift/cruise exhaust nozzles in the nacelles, and the addition of a third J97 engine in the fuselage to suppy a remote exhaust nozzle simulating a Remote Augmented Lift System. A preliminary design of the inlet and exhaust ducting for the third engine was developed and a detailed design was completed of the hot exhaust ducting and remote nozzle.

Willis, W. S.↗
NASA NTRS1981

Development and fabrication of a solar cell junction processing system

Modifications to the ground plane, to insure a good electrical return path during the pulse discharge, were made using a ring of beryllium copper finger stock attached to the underside of the aluminum ground plate. Experiments on annealing of wafers with ion implantation damage continued. The entire surface of 100 mm diameter wafers were annealed by one pulse for the standard implant (10 keV, phosphorus, 2x10 to the 15th power ions/sq cm). While samples are being fabricated into solar cells for electrical characterization, work is continuing on improvement of the electron beam uniformity and the optimization of the diode parameters. The engineering design was completed and the manufacturing detail drawings were released for fabrication. Assembly of the subcomponents for the exit and entrance locks is almost complete. These components include the cassettes, the indexing mechanisms, main doors, and wafer carrier transfer modules. The 'Y' track and three phase transition track sections are under final assembly and test.

Giesling, R.↗
NASA NTRS1981

Retrofit and acceptance test of 30-cm ion thrusters

Six 30 cm mercury thrusters were modified to the J-series design and evaluated using standardized test procedures. The thruster performance meets the design objectives (lifetime objective requires verification), and documentation (drawings, etc.) for the design is completed and upgraded. The retrofit modifications are described and the test data for the modifications are presented and discussed.

Poeschel, R. L.↗
NASA NTRS1982

Development of flying qualities criteria for single pilot instrument flight operations

Flying qualities criteria for Single Pilot Instrument Flight Rule (SPIFR) operations were investigated. The ARA aircraft was modified and adapted for SPIFR operations. Aircraft configurations to be flight-tested were chosen and matched on the ARA in-flight simulator, implementing modern control theory algorithms. Mission planning and experimental matrix design were completed. Microprocessor software for the onboard data acquisition system was debugged and flight-tested. Flight-path reconstruction procedure and the associated FORTRAN program were developed. Algorithms associated with the statistical analysis of flight test results and the SPIFR flying qualities criteria deduction are discussed.

Bar-Gill, A.↗
NASA NTRS1981

Advanced Gas Turbine (AGT) powertrain system development for automotive applications

Preliminary layouts were made for the exhaust system, air induction system, and battery installation. Points of interference were identified and resolved by altering either the vehicle or engine designs. An engine general arrangement evolved to meet the vehicle engine compartment constraints while minimizing the duct pressure losses and the heat rejection. A power transfer system (between gasifier and power turbines) was developed to maintain nearly constant temperatures throughout the entire range of engine operation. An advanced four speed automatic transmission was selected to be used with the engine. Performance calculations show improvements in component efficiencies and an increase in fuel economy. A single stage centrifugal compressor design was completed and released for procurement. Gasifier turbine, power turbine, combustor, generator, secondary systems, materials, controls, and transmission development are reported.

Source record↗
NASA NTRS1983

The FEM-2 design method

The FEM-2 parallel computer is designed using methods differing from those ordinarily employed in parallel computer design. The major distinguishing aspects are: (1) a top-down rather than bottom-up design process; (2) the design considers the entire system structure in terms of layers of virtual machines; and (3) each layer of virtual machine is defined formally during the design process. The result is a complete hardware/software system design. The basic design method is discussed and the advantages of the method are considered. A status report on the FEM-2 design is included.

Pratt, T. W.↗
NASA NTRS1981

Progress report on the high resolution spectrograph for the Space Telescope

The instrument design is complete and many components and subsystems have been manufactured and tested. Solar-blind, multichannel, pulse counting detectors for two ultraviolet spectral bands have been developed and satisfactory flight units have been chosen. A large, lightweight graphite-epoxy optical bench, utilizing fingerplate joints with no metallic parts in order to minimize thermal expansion, has been built. Tests of the engineering model torque-motor-driven grating carrousel indicate that this critical system exceeds tight specifications for accurate and repeatable angular positioning. A complement of large, high-frequency gratings and an echelle is being completed in several laboratories. Software resident in a computer on the spacecraft will control the spectrograph with the capability to alter procedures in response to real-time evaluation of the data.

Brandt, J. C.↗
NASA NTRS1984

Flowfield measurements in a model scramjet combustion using laser-induced iodine fluorescence

Preliminary designs were completed for an iodine mixing chamber and the optical setup to be used with a modified wind tunnel in obtaining accurate, spatially resolved measurements of variables in the flowfield of a model nonreacting scramjet combustor. Schematics of the iodine-seeded wind tunnel and a sketch of the charcoal filter for removing the iodine are included along with a cutaway section of the laboratory.

Mcdaniel, J. C., Jr.↗
NASA NTRS1984

Brayton Module Development Overview

The Advanced Gas Turbine (AGT) and the Subatmospheric Brayton Cycle (SABC) engines are under development. The AGT is developed for automotive applications while the SABC is developed for a gas fired heat pump application. Trade studies of the AGT, the SABC and other existing gas turbins are conducted in combination with various concentrators. The recommendation from these studies is to use the SABC for near term module development while following the AGT development for later advanced application. A preliminary design is completed at the module.

Holbeck, H. J.↗
NASA NTRS1983

Positive displacement compounding of a heavy duty diesel engine

A helical screw type positive displacement (PD) compressor and expander was considered as an alternative to the turbocharger and the power turbine in the Cummins advanced turbocompound engine. The Institute of Gas Technology (IGT) completed the design, layout, and performance prediction of the PD machines. The results indicate that a screw compressor-expander system is feasible up to at least 750 HP, dry operation of the rotors is feasible, cost and producibility are uncertain, and the system will yield about 4% improvement in brake specific fuel consumption (BSFC) over the advanced turbocompound engine.

Sekar, R.↗
NASA NTRS1986

Computational models for the analysis/design of hypersonic scramjet components. I - Combustor and nozzle models

An overview of computational models developed for the complete, design-oriented analysis of a scramjet propulsion system is provided. The modular approach taken involves the use of different PNS models to analyze the individual propulsion system components. The external compression and internal inlet flowfields are analyzed by the SCRAMP and SCRINT components discussed in Part II of this paper. The combustor is analyzed by the SCORCH code which is based upon SPLITP PNS pressure-split methodology formulated by Dash and Sinha. The nozzle is analyzed by the SCHNOZ code which is based upon SCIPVIS PNS shock-capturing methodology formulated by Dash and Wolf. The current status of these models, previous developments leading to this status, and, progress towards future hybrid and 3D versions are discussed in this paper.

Dash, S. M.↗
NASA NTRS1986

A 405-MHz, 5-beam phased array antenna

The Wave Propagation Lab. has completed the design and construction of a phased array antenna for use at 405.25 MHz for atmospheric wind profiling. The steering geometry of the sequentially switched beam is shown. The Yagi-Uda antenna elements are arranged on a square grid whose axes are 45 deg with respect to the cardinal directions. By constraining the phase difference between rows of identically phased elements to an even, integral submultiple of 360 deg, symmetries appear in the phasing maps which reduce the switching hardware. The vertical beam is generated by switching around the four beam circuitry which results in identical phasing on all of the elements. After the 18 signals are synthesized they are split and distributed about the array while maintaining proper phasing because of the symmetries. Computer simulations were employed in the design process.

Law, D. C.↗
NASA NTRS1986

A microprogrammable radar controller

The Wave Propagation Lab. has completed the design and construction of a microprogrammable radar controller for atmospheric wind profiling. Unlike some radar controllers using state machines or hardwired logic for radar timing, this design is a high speed programmable sequencer with signal processing resources. A block diagram of the device is shown. The device is a single 8 1/2 inch by 10 1/2 inch printed circuit board and consists of three main subsections: (1) the host computer interface; (2) the microprogram sequencer; and (3) the signal processing circuitry. Each of these subsections are described in detail.

Law, D. C.↗
NASA NTRS1987

RE-1000 free-piston Stirling engine hydraulic output system description

The NASA Lewis Research Center was involved in free-piston Stirling engine research since 1976. Most of the work performed in-house was related to characterization of the RE-1000 engine. The data collected from the RE-1000 tests were intended to provide a data base for the validation of Stirling cycle simulations. The RE-1000 was originally build with a dashpot load system which did not convert the output of the engine into useful power, but was merely used as a load for the engine to work against during testing. As part of the interagency program between NASA Lewis and the Oak Ridge National Laboratory, (ORNL), the RE-1000 was converted into a configuration that produces useable hydraulic power. A goal of the hydraulic output conversion effort was to retain the same thermodynamic cycle that existed with the dashpot loaded engine. It was required that the design must provide a hermetic seal between the hydraulic fluid and the working gas of the engine. The design was completed and the hardware was fabricated. The RE-1000 was modified in 1985 to the hydraulic output configuration. The early part of the RE-1000 hydraulic output program consisted of modifying hardware and software to allow the engine to run at steady-state conditions. A complete description of the engine is presented in sufficient detail so that the device can be simulated on a computer. Tables are presented showing the masses of the oscillating components and key dimensions needed for modeling purposes. Graphs are used to indicate the spring rate of the diaphragms used to separate the helium of the working and bounce space from the hydraulic fluid.

Schreiber, Jeffrey G.↗