Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cost Trends”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Proposition to Optimize Fire Stations for Wildfires

The rising trend in wildfire occurrence and severity has put a strain on wildfire management organizations by spreading out limited resources to meet increasing demand. There has been extensive prior research and data collection to determine the areas of highest risk and to predict regional wildfire damages based on historical trends. Our group aims to utilize this data to best determine fire station placement, optimizing where resources are allocated to reduce the time and investment needed to effectively mitigate wildfires. Using existing research, we are able to calculate optimal fire station locations by utilizing a single-objective facility location problem algorithm incentivized for cost reduction. Further work would be needed to refine the algorithm to accommodate for more realistic factors including access to water and roadways as well as better accounting for the costs involved, but our work serves as a proof of concept and lays the foundation for future research. Implementation of this algorithm would allow public fire planning agencies (such as CAL FIRE and Forest Service) to shift resources to where they would be most effective.

Wildfires↗
NASA NTRS1972

Trends in NASA communication satellites

Satellite telecommunications can help to satisfy several national needs such as education, health care, cultural opportunities, and data transfer. There are current experiments being conducted with NASA spacecraft ATS 1, 3, and 5 in an attempt to satisfy these national needs. Future experiments are planned for the ATS F/G and CTS spacecrafts. The next generation of communications satellites must provide multiple region coverage, multichannel capability, high quality TV pictures, and must allow low cost ground receivers to be used. The proposed NASA spacecrafts, ATS H/I, will satisfy these requirements. Other countries of the world can benefit from ATS H/I technology.

Sivo, J. N.↗
NASA NTRS1981

Advanced subsonic transport propulsion

Examination of future subsonic commercial aircraft propulsion trends begins with a brief review of the current NASA Energy Efficient Engine (E3) Project. Included in this review are the factors that influenced the design of these turbofan engines and the advanced technology incorporated in them to reduce fuel consumption and improve environmental characteristics. In addition, factors such as the continuing spiral in fuel cost, that could influence future aircraft propulsion systems beyond those represented by the E3 engines, are also discussed. Advanced technologies that will address these influencing factors and provide viable future propulsion systems are described. And finally, the potential importance of other propulsion system types, such as geared fans and turboshaft engines, is presented.

Nored, D. L.↗
NASA NTRS1997

Computational Modeling as a Design Tool in Microelectronics Manufacturing

Plans to introduce pilot lines or fabs for 300 mm processing are in progress. The IC technology is simultaneously moving towards 0.25/0.18 micron. The convergence of these two trends places unprecedented stringent demands on processes and equipments. More than ever, computational modeling is called upon to play a complementary role in equipment and process design. The pace in hardware/process development needs a matching pace in software development: an aggressive move towards developing "virtual reactors" is desirable and essential to reduce design cycle and costs. This goal has three elements: reactor scale model, feature level model, and database of physical/chemical properties. With these elements coupled, the complete model should function as a design aid in a CAD environment. This talk would aim at the description of various elements. At the reactor level, continuum, DSMC(or particle) and hybrid models will be discussed and compared using examples of plasma and thermal process simulations. In microtopography evolution, approaches such as level set methods compete with conventional geometric models. Regardless of the approach, the reliance on empricism is to be eliminated through coupling to reactor model and computational surface science. This coupling poses challenging issues of orders of magnitude variation in length and time scales. Finally, database development has fallen behind; current situation is rapidly aggravated by the ever newer chemistries emerging to meet process metrics. The virtual reactor would be a useless concept without an accompanying reliable database that consists of: thermal reaction pathways and rate constants, electron-molecule cross sections, thermochemical properties, transport properties, and finally, surface data on the interaction of radicals, atoms and ions with various surfaces. Large scale computational chemistry efforts are critical as experiments alone cannot meet database needs due to the difficulties associated with such controlled experiments and costs.

Meyyappan, Meyya↗
NASA NTRS1975

Some trends in aircraft design: Structures

Trends and programs currently underway on the national scene to improve the structural interface in the aircraft design process are discussed. The National Aeronautics and Space Administration shares a partnership with the educational and industrial community in the development of the tools, the criteria, and the data base essential to produce high-performance and cost-effective vehicles. Several thrusts to build the technology in materials, structural concepts, analytical programs, and integrated design procedures essential for performing the trade-offs required to fashion competitive vehicles are presented. The application of advanced fibrous composites, improved methods for structural analysis, and continued attention to important peripheral problems of aeroelastic and thermal stability are among the topics considered.

Brooks, G. W.↗
NASA NTRS1990

Economic consequences of commercial space operations

The potential economic benefits generated from increased industry involvement and investment in space activities and the subsequent cost implications are discussed. A historical overview of commercial industry involvement in space is given and sources of new economic growth in space are discussed. These include communications satellites, small satellites, positioning and navigation services, space transportation and infrastructure, remote sensing, and materials processing in space such as the manufacturing of protein crystals and zeolites. Macroeconomic trends and principles such as limits on technology trade, eased restrictions on international joint ventures, foreign investments in U.S. firms, and increased foreign competition are discussed. Earth observations and mapping are considered. Opportunities for private sector involvement in building space infrastructure and space transportation are highlighted.

Stone, Barbara A.↗
NASA NTRS1998

Chemical Gas Sensors for Aerospace Applications

Chemical sensors often need to be specifically designed (or tailored) to operate in a given environment. It is often the case that a chemical sensor that meets the needs of one application will not function adequately in another application. The more demanding the environment and specialized the requirement, the greater the need to adapt exiting sensor technologies to meet these requirements or, as necessary, develop new sensor technologies. Aerospace (aeronautic and space) applications are particularly challenging since often these applications have specifications which have not previously been the emphasis of commercial suppliers. Further, the chemical sensing needs of aerospace applications have changed over the years to reflect the changing emphasis of society. Three chemical sensing applications of particular interest to the National Aeronautics and Space Administration (NASA) which illustrate these trends are launch vehicle leak detection, emission monitoring, and fire detection. Each of these applications reflects efforts ongoing throughout NASA. As described in NASA's "Three Pillars for Success", a document which outlines NASA's long term response to achieve the nation's priorities in aerospace transportation, agency wide objectives include: improving safety and decreasing the cost of space travel, significantly decreasing the amount of emissions produced by aeronautic engines, and improving the safety of commercial airline travel. As will be discussed below, chemical sensing in leak detection, emission monitoring, and fire detection will help enable the agency to meet these objectives. Each application has vastly different problems associated with the measurement of chemical species. Nonetheless, the development of a common base technology can address the measurement needs of a number of applications.

Hunter, Gary W.↗
NASA NTRS2016

Wave Amplitude Dependent Engineering Model of Propellant Slosh in Spherical Tanks

Liquid propellant slosh is often a concern for the controllability of flight vehicles. Anti-slosh devices are traditionally included in propellant tank designs to limit the amount of sloshing allowed during flight. These devices and any necessary supports can be quite heavy to meet various structural requirements. Some of the burden on anti-slosh devices can be relieved by exploiting the nonlinear behavior of slosh waves in bare smooth wall tanks. A nonlinear regime slosh model for bare spherical tanks was developed through a joint analytical and experimental effort by NASA/MSFC. The developed slosh model accounts for the large damping inherent in nonlinear slosh waves which is more accurate and drives conservatism from vehicle stability analyses that use traditional bare tank slosh models. A more accurate slosh model will result in more realistic predicted slosh forces during flight reducing or removing the need for active controls during a maneuver or baffles in the tank design. Lower control gains and smaller or fewer tank baffles can reduce cost and system complexity while increasing vehicle performance. Both Computational Fluid Dynamics (CFD) simulation and slosh testing of three different spherical tank geometries were performed to develop the proposed slosh model. Several important findings were made during this effort in addition to determining the parameters to the nonlinear regime slosh model. The linear regime slosh damping trend for spherical tanks reported in NASA SP-106 was shown to be inaccurate for certain regions of a tank. Additionally, transition to the nonlinear regime for spherical tanks was only found to occur at very large wave amplitudes in the lower hemisphere and was a strong function of the propellant fill level in the upper hemisphere. The nonlinear regime damping trend was also found to be a function of the propellant fill level.

Brodnick, Jacob↗
NASA NTRS1981

Evaluation of the Williams-type model for barley yields in North Dakota and Minnesota

The Williams-type yield model is based on multiple regression analysis of historial time series data at CRD level pooled to regional level (groups of similar CRDs). Basic variables considered in the analysis include USDA yield, monthly mean temperature, monthly precipitation, soil texture and topographic information, and variables derived from these. Technologic trend is represented by piecewise linear and/or quadratic functions of year. Indicators of yield reliability obtained from a ten-year bootstrap test (1970-1979) demonstrate that biases are small and performance based on root mean square appears to be acceptable for the intended AgRISTARS large area applications. The model is objective, adequate, timely, simple, and not costly. It consideres scientific knowledge on a broad scale but not in detail, and does not provide a good current measure of modeled yield reliability.

Barnett, T. L.↗
NASA NTRS1993

Reliability of solid rocket motor cases and nozzles

A recent article in Aerospace America claims that 'the average success ratio of the current U.S. stable of launch vehicles, including upper stages, is about 92 percent (without upper stages it is close to 95 percent). The 8 percent failure probability implies an expected loss of $12M per flight, not including the lost opportunity costs'. Since payload costs are likely to be much greater than launch costs and even more so for the new launch vehicles for the Advanced Launch Development Program (ALDP), the cost of rocket motor unreliability at the current 8 percent rate can run into billions of dollars if expected increases in demand are realized. At an 8 percent failure rate, it is extremely unlikely that failure will occur during the first few ground tests of a new system. At that time, most of the design, analysis and tooling costs of the program have not expended. Since most systems are expected to be used ten to a hundred or more times, the likelihood of one or more failures is very large, and it can be expected that the above losses will be realized in the future. This will occur unless the problems are addressed and remedied. Recent trends suggest the problem is not being addressed adequately.

Crose, James G.↗
NASA NTRS2010

Use of Business Intelligence Tools in the DSN

JPL has operated the Deep Space Network (DSN) on behalf of NASA since the 1960's. Over the last two decades, the DSN budget has generally declined in real-year dollars while the aging assets required more attention, and the missions became more complex. As a result, the DSN budget has been increasingly consumed by Operations and Maintenance (O&M), significantly reducing the funding wedge available for technology investment and for enhancing the DSN capability and capacity. Responding to this budget squeeze, the DSN launched an effort to improve the cost-efficiency of the O&M. In this paper we: elaborate on the methodology adopted to understand "where the time and money are used"-surprisingly, most of the data required for metrics development was readily available in existing databases-we have used commercial Business Intelligence (BI) tools to mine the databases and automatically extract the metrics (including trends) and distribute them weekly to interested parties; describe the DSN-specific effort to convert the intuitive understanding of "where the time is spent" into meaningful and actionable metrics that quantify use of resources, highlight candidate areas of improvement, and establish trends; and discuss the use of the BI-derived metrics-one of the most fascinating processes was the dramatic improvement in some areas of operations when the metrics were shared with the operators-the visibility of the metrics, and a self-induced competition, caused almost immediate improvement in some areas. While the near-term use of the metrics is to quantify the processes and track the improvement, these techniques will be just as useful in monitoring the process, e.g. as an input to a lean-six-sigma process.

Metrics↗
NASA NTRS1978

Needs and trends in structural dynamics

The paper discusses dynamic analyses and testing of aerospace vehicles and the application of such analyses and testing to nonaerospace fields. Items covered in the section on dynamic analyses of aerospace vehicles include self-induced and forced oscillatory loads, approaches to dynamic modeling and analysis, nonlinear analyses, and integrated dynamics design and optimization. Items covered in the section on the dynamic testing of aerospace vehicles include integrated test philosophy, test facilities, and ways of improving performance and reducing costs. The nonaerospace applications that are discussed include ground and water transportation, medicine, and nuclear power plants.

Morosow, G.↗
NASA NTRS2003

Past, Present and Future Trends for NASA's EEE Parts Program

The foundation of NASA's Electrical, Electronic and Electromechanical (EEE) parts program is standardization. Standardization helps to reduce the number of unknown variables present as a project or program progresses; unknown variables equate to unknown risk. NASA spacecraft are usually 'one-offs' or at least part of a very short run, and every new part that is used represents a risk that has to be understood and mitigated as necessary. This equates directly to time and cost. Standardization of component parts is used to provide a foundation of known, dependable, qualified parts upon which a safe, reliable system can be built. In addition, the evaluation and selection of parts for the standard parts list unifies the activity under one group of experts rather than having engineers on each project overlapping and duplicating efforts. Thus, the project support engineers are able to concentrate on understanding and mitigating the risks for the non standard parts required to meet specific requirements of their project. Rapid technology change is producing conditions that make any form of parts-based standardization increasingly difficult, particularly the use of Commercial Off The Shelf (COTS) parts and assemblies. There are many complications to COTS-based standardization. COTS parts change rapidly and unpredictably, often have different characteristics fiom manufacturer to manufacturer, frequently are only available through distribution, have no universal specification and have variable and unpredictable radiation characteristics. This presentation will discuss some potential approaches to COTS parts standardization. Further into the future, in three to five years perhaps, the use of COTS boards and boxes will be extensive and standardization at these levels of assembly will be necessary. In five to ten years, most major spacecraft functions will probably be performed by COTS boards. How will this be achieved? What role will the parts engineer play, if any? This presentation will borrow from the lessons of the past to suggest some scenarios for the future.

Sampson, Michael J.↗
NASA NTRS1983

Space station needs, attributes, and architectural options: Space station program cost analysis

This report documents the principal cost results (Task 3) derived from the Space Station Needs, Attributes, and Architectural Options study conducted for NASA by the McDonnell Douglas Astronautics Company. The determined costs were those of Architectural Options (Task 2) defined to satisfy Mission Requirements (Task 1) developed within the study. A major feature of this part of the study was the consideration of realistic NASA budget constraints on the recommended architecture. Thus, the space station funding requirements were adjusted by altering schedules until they were consistent with current NASA budget trends.

Cowls, R. S.↗
NASA NTRS1999

Using Spaceborne Ku-Band Scatterometer for Global Snow Cover Monitoring

We demonstrate for the first time the utility of spaceborne Ku-band scatterometer for global snow cover monitoring. Satellite radar data were collected over the globe by the NASA Scatterometer (NSCAT) operated at 14 GHz on board the Japanese ADEOS spacecraft from September 1996 to June 1997, spanning the 1997 seasonal snow season. First, we present backscatter signature of dry and wet snow to facilitate the interpretation of NSCAT backscatter evolution over snow cover regions. Surface field experiments indicated that dry snow backscatter at Ku band is approximately 40 times stronger than that at C band. Thus, Ku-band scatterometer measurements are sensitive to snow cover, which is typically transparent to C-band scatterometer returns. Furthermore, Ku-band backscatter does not saturate for most of natural snow depths as compared to radar responses at 19 GHz and 37 GHz or higher frequencies which have more limited penetration depths into snow. Ku-band backscatter is also sensitive to wetness in snow, which is appropriate to detect early snow melt conditions. Using the snow backscatter characteristics, we investigate NSCAT backscatter evolution over global snow cover regions throughout the 1997 snow season. The results reveal detail delineations between different regional snow areas. We show the correlation of these delineations with the boundaries of different global snow classes defined by the U.S. Army Cold Regions Research and Engineering Laboratory snow classification system. Using in-situ snow depth data from the U.S. National Climatic Data Center, we show that Ku-band backscatter corresponds very well to the trend of snow melt while snow mapping products (U.S. Climate Prediction Center gridded snow charts) from visible sensors does not reflect the fast snow melt trend. To illustrate the practical application of global snow monitoring with spaceborne Ku-band scatterometer, we present NSCAT backscatter response corresponding to the snow event leading to the 1997 Flood of the Century over the U.S. Northern plains and the Canadian prarie region, which caused loss of lives and several billion dollars in flood related damages and cleanup costs. Finally, we show that the fixed incidence configuration of Seawinds scatterometers, to be launched on QuickSCAT and on ADEOS-2 in the near future, is better for snow monitoring and then discuss the use of future high-resolution scatterometers for global snow mapping.

Nghiem, S. V.↗
NASA NTRS2011

Reliable Multicore Processors for NASA Space Missions

The current trend in commercial processors of moving to many cores (30 to100 and beyond) on a single die poses both an opportunity and a challenge for space based processing. 1 2 The opportunity is to leverage this trend for space application and thus provide an order of magnitude increase in onboard processing capability. The challenge is to provide the requisite reliability in an extremely challenging environment. In this paper, we will discuss the requirements for reliable space based multicore computing and approaches being explored to deliver this capability within NASA's extremely tight power, mass, and cost constraints.

radiation hardening↗
NASA NTRS1993

A comparison between coherent and noncoherent mobile systems in large Doppler shift, delay spread, and C/I environment

The performance and implementation complexity of coherent and of noncoherent QPSK and GMSK modulation/demodulation techniques in a complex mobile satellite systems environment, including large Doppler shift, delay spread, and low C/I, are compared. We demonstrate that for large f(sub d)T(sub b) products, where f(sub d) is the Doppler shift and T(sub b) is the bit duration, noncoherent (discriminator detector or differential demodulation) systems have a lower BER floor than their coherent counterparts. For significant delay spreads, e.g., tau(sub rms) greater than 0.4 T(sub b), and low C/I, coherent systems outperform noncoherent systems. However, the synchronization time of coherent systems is longer than that of noncoherent systems. Spectral efficiency, overall capacity, and related hardware complexity issues of these systems are also analyzed. We demonstrate that coherent systems have a simpler overall architecture (IF filter implementation-cost versus carrier recovery) and are more robust in an RF frequency drift environment. Additionally, the prediction tools, computer simulations, and analysis of coherent systems is simpler. The threshold or capture effect in low C/I interference environment is critical for noncoherent discriminator based systems. We conclude with a comparison of hardware architectures of coherent and of noncoherent systems, including recent trends in commercial VLSI technology and direct baseband to RF transmit, RF to baseband (0-IF) receiver implementation strategies.

Feher, Kamilo↗
NASA NTRS1981

Hard permanent magnet development trends and their application to A.C. machines

The physical and magnetic properties of Mn-Al-C, Fe-Cr-Co, and RE-TM (rare earth-transition metal intermetallics) in polymer and soft metal bonded or sintered form are considered for ac circuit machine usage. The manufacturing processes for the magnetic materials are reviewed, and the mechanical and electrical properties of the magnetic materials are compared, with consideration given to the reference Alnico magnet. The Mn-Al-C magnets have the same magnetic properties and costs as Alnico units, operate well at low temperatures, but have poor high temperature performance. Fe-Cr-Co magnets also have comparable cost to Alnico magnets, and operate at high or low temperature, but are brittle, expensive, and contain Co. RE-Co magnets possess a high energy density, operate well in a wide temperature range, and are expensive. Recommendation for exploring the rare-earth alternatives are offered.

Mildrum, H. F.↗