Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIELECTRICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Numerical simulation of plasma insulator interactions in space. Part 2: Dielectric effects

Any process which may be modeled statistically for a simple plasma particle may be modeled by the particle in cell technique. The success of the calculation is then dependent on having a large enough number of particles that the statistical treatment is meaningful. Thus it is possible to include the effects of secondary emission, backscattering, charge sticking and possibly dielectric breakdown, photoemission, and spallation. The first plasma dielectric interaction included in the computer code for simulating plasma insulator interactions is secondary electron emission. A calculated current density vs. voltage curve is presented and compared to an experimental curve.

Chaky, R. C.↗

Dielectric properties of snow

The dielectric properties of snow in the radio frequency range from 100 KHz to 35 GHz are reviewed. Applicable dielectric mixing formulas are discussed and compared to available experimental data.

Stiles, W. H.↗

Internal breakdown of charged spacecraft dielectrics

It is suggested that small energy discharges of low differential voltage that are associated with internal buried charge may be an important mechanism by which sorted electrostatic energy is released from dielectrics on board orbiting spacecraft. The evidence from space given by Stevens (1980) is noted, and the laboratory experimental evidence of Frederickson is cited to demonstrate that discharges occur under circumstances with no external potential drop. Previous calculations indicating that significant internal electric fields can exist in dielectrics charged with multiple-kilovolt electron beams under conditions involving little or no external potential drop are reviewed. Attention is given to the internal discharge mechanism of Meulenberg (1976), and new calculations suggesting that the space environment is conducive to the formation of the conditions required by this mechanism are presented. Experimental procedures for checking the suggestions made are developed.

Beers, B. L.↗

Application of strong fluctuation random medium theory to scattering of electromagnetic waves from a half-space of dielectric mixture

The strong fluctuation random medium theory is applied to calculate scattering from a half-space of dielectric mixture. The first and second moments of the fields are calculated, respectively, by using the bilocal and the distorted Born approximations, and the low frequency limit is taken. The singularity of the dyadic Green's function is taken into account. Expressions for the effective permittivity for the full space case are derived. It is shown that the derived result of the effect permittivity is identical to that of the Polder and van Santern mixing formula. The correlation function of the random medium is obtained by using simple physical arguments and is expressed in terms of the fractional volumes and particle sizes of the constituents of the mixture. Backscattering coefficients of a half-space dielectric mixture are also calculated. Numerical results of the effective permittivity and backscattering coefficients are illustrated using typical parameters encountered in microwave remote sensing of dry and wet snow. It is also shown that experimental data can be matched with the theory by using physical parameters of the medium as obtained from ground truth measurements.

Tsang, L.↗

The radar cross section of dielectric disks

A solution is presented for the backscatter (nonstatic) radar cross section of dielectric disks of arbitrary shape, thickness and dielectric constant. The result is obtained by employing a Kirchhoff type approximation to obtain the fields inside the disk. The internal fields induce polarization and conduction currents from which the scattered fields and the radar cross section can be computed. The solution for the radar cross section obtained in this manner is shown to agree with known results in the special cases of normal incidence, thin disks and perfect conductivity. The solution can also be written as a product of the reflection coefficient of an identically oriented slab times the physical optics solution for the backscatter cross section of a perfectly conducting disk of the same shape. This result follows directly from the Kirchhoff type approximation without additional assumptions.

D M Le Vine↗

High frequency scattering by a thin dielectric slab

The geometrical theory of diffraction (GTD) is applied to the problem of a source in the presence of a three-dimensional thin dielectric slab. It is assumed that the reflection and transmission properties of the slab are known, and the slab is not lossy and/or multilayered. Two-dimensional thin dielectric layer scattering is analyzed when diffraction emanates from a single point, the source is not near the slab, and random energy approaching tangentially due to transmission is negligible. Coefficients are obtained for the scattering and the GTD solution is extended to the three dimensional case after development of a ray fixed coordinate system. The results are applied to a half wavelength dipole mounted above a square polystyrene covered ground plane.

Burnside, W. D.↗

Low frequency dielectric relaxation in boracites

In order to elucidate the nature of the imperfections which adversely affect pyroelectric processes in boracites, the thermal and dispersive characteristics of the low frequency dielectric response in iron-iodide boracite (Fe3B7O13I) and copper-chloride boracite (Cu3B7O13Cl) have been investigated. These characteristics were measured as a function of crystallographic orientation and applied field in both the ferroelectric and paraelectric states. The low frequency dielectric relaxation of 100 line oriented multi-domain copper-chloride boracite clearly indicates the dipole nature of the lattice imperfections. The activation energies calculated from a noninteracting Debye model, are 0.53 eV in the ferroelectric phase and 0.10 eV in the paraelectric phase.

Kim, Q.↗

Theoretical Investigation Of Dielectric Horn Antennas

Mathematical model applicable to both solid and hollow dielectric horn antennas implemented in computer program. Conventional hollow metal horns have several disadvantages: difficult to fabricate at short wavelenghts and conducting properties of metal tend to deteriorate with increasing frequency. Dielectric horns offer advantages over conventional metal horns. Computer program permits user to investigate potential of various dielectricantenna designs.

Raines, J. K.↗

Dynamic dielectric characterization of thermosets and thermoplastics using intrinsic variables

Dynamic dielectric analysis has been used to study curing polymer systems and thermoplastics. Measurements have been made over a frequency range of six decades. The data are analyzed in terms of capacitance, conductance, dissipation, complex permittivity, and conductivity (sigma). Complex permittivity and sigma are properties which are characteristic of the cure state of the material and independent of the size of the sample. LARC-160, PMR-15, NARMCO 5208, Epon and UDEL-P1700 have been studied. The experimental results suggest that when ionic processes dominate the dielectric response, the intensive property sigma is a good monitor of the resin's viscosity.

Kranbuehl, D. E.↗

Radiation effects response data for synthetic organic insulation and dielectrics

Existing radiation response data for 130 materials of the synthetic organic insulation and dielectric class are analyzed, and thresholds and 25-percent change dose levels for these materials are presented. Both the lowest reported threshold dose (LTD) and the 25-percent change dose level are found to vary widely among the different insulators (used as spacecraft components). The LTD is tabulated to indicate the levels where radiation effects become apparent. These level are of use in setting a lower limit where changes can be expected, and could be used to exempt synthetic insulation and dielectrics from radiation considerations when the environments are substantially below this limit. Cautions to be observed in applying the data to current problems are presented.

Bouquet, F. L.↗

Dielectric properties of 'diamondlike' carbon prepared by RF plasma deposition

Metal-carbon-metal structures were fabricated using either gold or aluminum evaporated electrodes and RF plasma (methane) deposited 'diamondlike' carbon films. Alternating-current conductance and capacitance versus voltage and frequency (10 Hz to 13 MHz) data were taken to determine the dielectric properties of these films. Conductance versus frequency data fit a generalized power law, consistent with both dc and hopping conduction components. The capacitance versus frequency data are well matched to the conductance versus frequency data, as predicted by a Kramers-Kronig analysis. The dielectric loss tangent is nearly constant at 0.5 to 1.0 percent over the frequency range from 1 to 100 kHz. The dc resistivity is above 10 to the 13th ohm cm, and the dc breakdown strength is above 8 x 10 to the 6th V/cm is properly prepared samples.

Lamb, J. D.↗

Theoretical Study of the Transverse Dielectric Constant of Superlattices and Their Alloys

The optical properties of III to V binary and ternary compounds and GaAs-Al(x)Ga(1-x)As superlattices are determined by calculating the real and imaginary parts of the transverse dielectric constant. Emphasis is given to determining the influence of different material and superlattice parameters on the values of the index of refraction and absorption coefficient. In order to calculate the optical properties of a material, it is necessary to compute its electronic band structure. This was accomplished by introducing a partition band structure approach based on a combination of the vector k x vector p and nonlocal pseudopotential techniques. The advantages of this approach are that it is accurate, computationally fast, analytical, and flexible. These last two properties enable incorporation of additional effects into the model, such as disorder scattering, which occurs for alloy materials and excitons. Furthermore, the model is easily extended to more complex structures, for example multiple quantum wells and superlattices. The results for the transverse dielectric constant and absorption coefficient of bulk III to V compounds compare well with other one-electron band structure models and the calculations show that for small frequencies, the index of refraction is determined mainly by the contibution of the outer regions of the Brillouin zone.

Kahen, K. B.↗

Water permeation and dielectric breakdown. Water permeability in Pub Tedlar. Pub/Tedlar as a function of temperature and humidity

Moisture transport and dielectric breakdown of polyvinyl butyral (PVB), Tedlar, and PVB/Tedlar composites were addressed. Data for the temperature range between 20 and 80 C showed that the moisture flux through the composite is governed by the slower material; and that the composite permeability is intermediate to those of the component material, as predicted by theory. Data for Tedlar at 71 C, showing the dependence of moisture flux on relative humidity, was also presented. Dielectric breakdown data were less precise and less conclusive. The generally applied theoretical model does not match the experimental data. The PVB/Tedlar composite exhibited greater voltage breakdown resistance than either component. Testing of EVA and EVA/Tedlar composites is underway.

Orehotsky, J.↗

Microstrip termination effects on dielectric resonator filters

Dielectric resonator filters coupled to microstrip lines appear to answer the requirements of high performance and small size and weight that must be satisfied for use in satellite-based radiometers. The open-circuit and short-circuit types of coupling dielectric resonators to microstrip lines were compared with respect to radiation losses at various frequencies. The filters were fabricated from 1.6 mm Duroid board. The termination impedances for the microstrip lines were measured using a calibrated HP 8510 network analyzer. The values for radiation resistance obtained experimentally for both types of coupling agreed well with the values calculated from the Lewin theory (1960). It was found that the use of short-circuit coupling results in significantly reduced radiation resistance compared to the use of open-circuit lines. Improvement increases with increased frequency.

Trew, R. J.↗

Dielectric Monitoring of Curing Composites

Report describes preliminary attempts at dielectric monitoring of curing of graphite/epoxy and carbon/phenolic composites. Objective is to develop dielectric monitoring for optimizing curing process and reduce incidence of failures of produced composite structures.

Goldberg, Benjamin E.↗

Degradation Of Reflectors And Dielectrics

Report describes important degrading effects of atmosphere and outer-space environments on reflective surfaces and dielectrics. For reflective surfaces, terrestrial effects include soiling on glass surfaces and changing with time. Space effects include ultraviolet enhancement of contamination and possible surface erosion due to solar radiation, impact of debris, and interactions with atomic oxygen. Dielectrics similarly affected in both environments.

Bouquet, Frank L.↗

Method and apparatus for making an optical element having a dielectric film

A film-application device (FAD) comprising a pair of exterior, tapered, O-ring bearing plate members and a central plate member for simplifying the process of thermally bonding a thin dielectric film to a substrate comprising an optical element are discussed. In use, the film is sandwiched between the O rings and stretched across the optical element by squeezing the exterior plates together before bonding to the element. The film may be used for protecting the optical element or to reduce surface reflection of radiation. The FAD may also be used without the center plate to stretch a dielectric film prior to its attachment to or insertion in a holder to make pellicles or beam-splitters.

Augason, Gordon C.↗

Spacecraft dielectric material properties and spacecraft charging

The physics of spacecraft charging is reviewed, and criteria for selecting and testing semiinsulating polymers (SIPs) to avoid charging are discussed and illustrated. Chapters are devoted to the required properties of dielectric materials, the charging process, discharge-pulse phenomena, design for minimum pulse size, design to prevent pulses, conduction in polymers, evaluation of SIPs that might prevent spacecraft charging, and the general response of dielectrics to space radiation. SIPs characterized include polyimides, fluorocarbons, thermoplastic polyesters, poly(alkanes), vinyl polymers and acrylates, polymers containing phthalocyanine, polyacene quinones, coordination polymers containing metal ions, conjugated-backbone polymers, and 'metallic' conducting polymers. Tables summarizing the results of SIP radiation tests (such as those performed for the NASA Galileo Project) are included.

Frederickson, A. R.↗