Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELASTIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Zirconate pyrochlores under high pressure

Ab initio total-energy calculations and x-ray diffraction measurements have been combined to study the phase stability of zirconate pyrochlores (A2Zr2O7; A=La, Nd and Sm) under pressures up to 50 GPa. Phase transformations to the defect-cotunnite structure are theoretically predicted at pressures of 22, 20 and 18 GPa, in excellent agreement with the experimentally determined values of 21, 22 and 18 GPa for La2Zr2O7, Nd2Zr2O7 and Sm2Zr2O7, respectively. Analysis of the elastic properties indicates that elastic anisotropy may be one of the driving forces for the pressure-induced cubic-to-noncubic phase transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Cr and Al on Elastic Constants of FeCrAl Alloys Investigated by Molecular Dynamics Method

The FeCrAl alloy system is recognized as one of the candidate materials for accident-tolerant fuel (ATF) cladding in the nuclear power industry due to its high oxidation resistance under irradiation and high-temperature environments. The concentrations of Cr and Al have a significant effect on elastic properties of the FeCrAl alloy. In this work, elastic constants C 11 , C 12 , C 44 , bulk modulus and shear modulus of FeCrAl alloy were calculated with molecular dynamics methods. We explored compositions with 1–15 wt.% Cr and 1–5 wt.% Al at temperatures from 0 K to 750 K. The results show that the concentrations of Al and Cr have different effects on the elastic constants. When the concentration of Al was fixed, a decrease in bulk modulus and shear modulus with increasing Cr content was observed, consistent with previous experimental results. The dependence of elastic constants on temperature was also the same as in the experiments. Investigations into elastic properties of defect-containing alloys have shown that vacancies, voids, interstitials and Cr-rich precipitations have different effects on elastic properties of FeCrAl alloys. Investigations of elastic properties of defect-containing alloys have shown that vacancies, void, interstitials and Cr-rich precipitations have different effects on elastic properties of FeCrAl alloys. Therefore, the present results indicate that both the Cr and Al concentrations and radiation defects should be considered to develop and apply the FeCrAl alloy in ATF design.

36 MATERIALS SCIENCE↗

Characterization of elastic-plastic properties of AS4/APC-2 thermoplastic composite

Elastic and inelastic properties of AS4/APC-2 composites were characterized with respect to temperature variation by using a one-parameter orthotropic plasticity model and a one parameter failure criterion. Simple uniaxial off-axis tension tests were performed on coupon specimens of unidirectional AS4/APC-2 thermoplastic composite at various temperatures. To avoid the complication caused by the extension-shear coupling effect in off-axis testing, new tabs were designed and used on the test specimens. The experimental results showed that the nonlinear behavior of constitutive relations and the failure strengths can be characterized quite well using the one parameter plasticity model and the failure criterion, respectively.

Sun, C. T.↗

Eshelby-Mori-Tanaka Approach

EMTA is a stand-alone computer program that has been developed for the computation of elastic properties and thermal expansion coefficients (thermoelastic properties) of discontinuous fiber composites. EMTA stands for the Eshelby-Mori-Tanaka approach. It implements the standard and modified Mori-Tanaka models that use the Eshelby's equivalent inclusion method. EMTA carries out the Eshelby-Mori-Tanaka homogenization procedure accounting for the constituents (fiber and matrix) properties such as the elastic properties and thermal expansion coefficients (CTEs) of the fibers and of the matrix. It also accounts for the constituents features such as fiber length and orientation distributions, fiber curvature, and imperfect fiber/matrix interfaces. The outputs of an EMTA execution are the elastic properties (engineering constants) and CTEs of the as-formed composite in the defined material coordinate system. These results can readily be used in engineering applications and designs that require these properties.

Nguyen, Ba Nghiep↗

Modeling and characterizing the elastodynamic response of octet-truss lattice structures using resonance techniques

Characterization of additively manufactured materials and structures is an ongoing effort for the advanced manufacturing community. This article will investigate an approach using resonant spectral ultrasound (RUS) to measure the effective elastic constants of an Octet Truss lattice and apply the results to continuum bases models representing the lattice regions in different structures. The study is focused on simple lattices structures fabricated from Ti5553 using a laser powder bed fusion process (LBPF). Solid and lattice samples are measured to determine RUS estimates for the elastic properties of the bulk material and the effective elastic properties of the lattice structure. The estimated elastic properties are then incorporated into 3d finite element models using a continuum approximation of the physical AM parts. Comparisons show good agreement between the experimentally measured eigen frequencies of the Ti5553 LBPF parts and the eigen frequencies calculated using the continuum approximations based on the effective RUS elastic properties. The current results suggest there is additional physics and geometrical effects that are accounted for in the RUS continuum approximation of the lattice that are not captured in the full 3d finite element model of the parts utilizing only the base material properties.

36 MATERIALS SCIENCE↗

Nanoindentation study of electrodeposited Ag thin coating: An inverse calculation of anisotropic elastic-plastic properties

A new inverse method was proposed to calculate the anisotropic elastic-plastic properties (flow stress) of thin electrodeposited Ag coating utilizing nanoindentation tests, previously reported inverse method for isotropic materials and three-dimensional (3-D) finite element analyses (FEA). Indentation depth was ~4% of coating thickness (~10 μm) to avoid substrate effect and different indentation responses were observed in the longitudinal (L) and the transverse (T) directions. The estimated elastic-plastic properties were obtained in the newly developed inverse method by matching the predicted indentation responses in the L and T directions with experimental measurements considering indentation size effect (ISE). The results were validated with tensile flow curves measured from free-standing (FS) Ag film. The current method can be utilized to characterize the anisotropic elastic-plastic properties of coatings and to provide the constitutive properties for coating performance evaluations.

Cheng, Guang (ORCID:0000000268604420)↗

Comparison of Models for Ball Bearing Dynamic Capacity and Life

Generalized formulations for dynamic capacity and life of ball bearings, based on the models introduced by Lundberg and Palmgren and Zaretsky, have been developed and implemented in the bearing dynamics computer code, ADORE. Unlike the original Lundberg-Palmgren dynamic capacity equation, where the elastic properties are part of the life constant, the generalized formulations permit variation of elastic properties of the interacting materials. The newly updated Lundberg-Palmgren model allows prediction of life as a function of elastic properties. For elastic properties similar to those of AISI 52100 bearing steel, both the original and updated Lundberg-Palmgren models provide identical results. A comparison between the Lundberg-Palmgren and the Zaretsky models shows that at relatively light loads the Zaretsky model predicts a much higher life than the Lundberg-Palmgren model. As the load increases, the Zaretsky model provides a much faster drop off in life. This is because the Zaretsky model is much more sensitive to load than the Lundberg-Palmgren model. The generalized implementation where all model parameters can be varied provides an effective tool for future model validation and enhancement in bearing life prediction capabilities.

Rolling-element Fatigue↗

Time-Lapse Integration at FWU: Fluids, Rock Physics, Numerical Model Integration, and Field Data Comparison

We present the current status of time-lapse seismic integration at the Farnsworth (FWU) CO2 WAG (water-alternating-gas) EOR (Enhanced Oil Recovery) project at Ochiltree County, northwest Texas. As a potential carbon sequestration mechanism, CO2 WAG projects will be subject to some degree of monitoring and verification, either as a regulatory requirement or to qualify for economic incentives. In order to evaluate the viability of time-lapse seismic as a monitoring method the Southwest Partnership (SWP) has conducted time-lapse seismic monitoring at FWU using the 3D Vertical Seismic Profiling (VSP) method. The efficacy of seismic time-lapse depends on a number of key factors, which vary widely from one application to another. Most important among these are the thermophysical properties of the original fluid in place and the displacing fluid, followed by the petrophysical properties of the rock matrix, which together determine the effective elastic properties of the rock fluid system. We present systematic analysis of fluid thermodynamics and resulting thermophysical properties, petrophysics and rock frame elastic properties, and elastic property modeling through fluid substitution using data collected at FWU. These analyses will be framed in realistic scenarios presented by the FWU CO2 WAG development. The resulting fluid/rock physics models will be applied to output from the calibrated FWU compositional reservoir simulation model to forward model the time-lapse seismic response. Modeled results are compared with field time-lapse seismic measurements and strategies for numerical model feedback/update are discussed. While mechanical effects are neglected in the work presented here, complementary parallel studies are underway in which laboratory measurements are introduced to introduce stress dependence of matrix elastic moduli.

4D↗

Hardness, elastic, and electronic properties of chromium monoboride

Here, we report high-pressure synthesis of chromium monoboride (CrB) at 6 GPa and 1400 K. The elastic and plastic behaviors have been investigated by hydrostatic compression experiment and micro-indentation measurement. CrB is elastically incompressible with a high bulk modulus of 269.0 (5.9) GPa and exhibits a high Vickers hardness of 19.6 (0.7) GPa under the load of 1 kg force. Based on first principles calculations, the observed mechanical properties are attributed to the polar covalent Cr-B bonds interconnected with strong zigzag B-B covalent bonding network. The presence of metallic Cr bilayers is presumably responsible for the weakest paths in shear deformation.

36 MATERIALS SCIENCE↗

Characterization of elastic-viscoplastic properties of an AS4/PEEK thermoplastic composite

The elastic-viscoplastic properties of an AS4/PEEK (APC-2) thermoplastic composite were characterized at 24 C (75 F) and 121 C (250 F) by using a one-parameter viscoplasticity model. To determine the strain-rate effects, uniaxial tension tests were performed on unidirectional off-axis coupon specimens with different monotonic strain rates. A modified Bodner and Partom's model was also used to describe the viscoplasticity of the thermoplastic composite. The experimental results showed that viscoplastic behavior can be characterized quite well using the one-parameter overstress viscoplasticity model.

Yoon, K. J.↗

Variation of elastic mechanical properties with texture, porosity, and defect characteristics in laser powder bed fusion 316L stainless steel

Elastic mechanical properties of 316 L stainless steel samples fabricated using laser powder bed fusion were studied non-destructively through resonant ultrasound spectroscopy. Samples in five different conditions were obtained by varying the laser power from 103 W (the highest density condition) to 68 W (the lowest density condition) at constant laser speed, producing samples with a volume energy density in the 24.5–16.5 J/mm 3 range and volumetric porosity in the 0.1–10% range. The observed elastic mechanical properties are discussed taking into consideration the bulk texture developed and quantitative pore characteristics studied using high-energy high-resolution synchrotron X-ray diffraction and X-ray computed micro-tomography, respectively. Furthermore, empirical exponential relationships are provided to express the functional dependence of Young's and shear moduli with porosity.

36 MATERIALS SCIENCE↗

Mechanical properties of metal dihydrides

First-principles calculations are used to characterize the bulk elastic properties of cubic and tetragonal phase metal dihydrides, $\text{M}{{\text{H}}_{2}}$ {$\text{M}$ = Sc, Y, Ti, Zr, Hf, lanthanides} to gain insight into the mechanical properties that govern the aging behavior of rare-earth di-tritides as the constituent 3 H, tritium, decays into 3 He. As tritium decays, helium is inserted in the lattice, the helium migrates and collects into bubbles, that then can ultimately create sufficient internal pressure to rupture the material. The elastic properties of the materials are needed to construct effective mesoscale models of the process of bubble growth and fracture. Dihydrides of the scandium column and most of the rare-earths crystalize into a cubic phase, while dihydrides from the next column, Ti, Zr, and Hf, distort instead into the tetragonal phase, indicating incipient instabilities in the phase and potentially significant changes in elastic properties. We report the computed elastic properties of these dihydrides, and also investigate the off-stoichiometric phases as He or vacancies accumulate. As helium builds up in the cubic phase, the shear moduli greatly soften, converting to the tetragonal phase. Conversely, the tetragonal phases convert very quickly to cubic with the removal of H from the lattice, while the cubic phases show little change with removal of H. Finally, the source and magnitude of the numerical and physical uncertainties in the modeling are analyzed and quantified to establish the level of confidence that can be placed in the computational results, and this quantified confidence is used to justify using the results to augment and even supplant experimental measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rock Physics of Geologic Carbon Sequestration/Storage

This report covers the results of developing the rock physics theory of the effects of CO 2 injection and storage in a host reservoir on the rock's elastic properties and the resulting seismic signatures (reflections) observed during sequestration and storage. Specific topics addressed are: (a) how the elastic properties and attenuation vary versus CO 2 saturation in the reservoir during injection and subsequent distribution of CO 2 in the reservoir; (b) what are the combined effects of saturation and pore pressure on the elastic properties; and (c) what are the combined effects of saturation and rock fabric alteration on the elastic properties. The main new results are (a) development and application of the capillary pressure equilibrium theory to forecasting the elastic properties as a function of CO 2 saturation; (b) a new method of applying this theory to well data; and (c) combining this theory with other effects of CO 2 injection on the rock frame, including the effects of pore pressure and rock fabric alteration. An important result is translating these elastic changes into synthetic seismic responses, specifically, the amplitude-versus-offset (AVO) response depending on saturation as well as reservoir and seal type. As planned, three graduate students participated in this work and, as a result, received scientific and technical training required should they choose to work in the area of monitoring and quantifying CO 2 sequestration.

54 ENVIRONMENTAL SCIENCES↗

Prediction of Mechanical Properties of Polymers With Various Force Fields

The effect of force field type on the predicted elastic properties of a polyimide is examined using a multiscale modeling technique. Molecular Dynamics simulations are used to predict the atomic structure and elastic properties of the polymer by subjecting a representative volume element of the material to bulk and shear finite deformations. The elastic properties of the polyimide are determined using three force fields: AMBER, OPLS-AA, and MM3. The predicted values of Young s modulus and shear modulus of the polyimide are compared with experimental values. The results indicate that the mechanical properties of the polyimide predicted with the OPLS-AA force field most closely matched those from experiment. The results also indicate that while the complexity of the force field does not have a significant effect on the accuracy of predicted properties, small differences in the force constants and the functional form of individual terms in the force fields determine the accuracy of the force field in predicting the elastic properties of the polyimide.

Odegard, Gregory M.↗

First principle study of elastic and thermodynamic properties of FeB{sub 4} under high pressure

The elastic properties, elastic anisotropy, and thermodynamic properties of the lately synthesized orthorhombic FeB{sub 4} at high pressures are investigated using first-principles density functional calculations. The calculated equilibrium parameters are in good agreement with the available experimental and theoretical data. The obtained normalized volume dependence of high pressure is consistent with the previous experimental data investigated using high-pressure synchrotron x-ray diffraction. The complete elastic tensors and crystal anisotropies of the FeB{sub 4} are also determined in the pressure range of 0–100 GPa. By the elastic stability criteria and vibrational frequencies, it is predicted that the orthorhombic FeB{sub 4} is stable up to 100 GPa. In addition, the calculated B/G ratio reveals that FeB{sub 4} possesses brittle nature in the range of pressure from 0 to 100 GPa. The calculated elastic anisotropic factors suggest that FeB{sub 4} is elastically anisotropic. By using quasi-harmonic Debye model, the compressibility, bulk modulus, the coefficient of thermal expansion, the heat capacity, and the Grüneisen parameter of FeB{sub 4} are successfully obtained in the present work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Demonstrating resonant ultrasound spectroscopy as a viable technique to characterize thermally conditioned high explosive materials

We present results of resonant ultrasound spectroscopy (RUS) measurements applied to granular high explosive materials at different bulk pressing densities and degree of thermal conditioning. The material chosen in this study is a ubiquitously used explosive material known as pentaerythritol tetranitrate (PETN), which is used commercially in civil and defense applications both as a binderized plastic bonded explosive material and an unbinderized neat material. However, changes in granular PETN bulk elastic properties due to thermal conditioning, which could have implications for better understanding environmental aging-related effects, have not been well studied even though it is believed that elasticity may play an important role in explosive material initiation mechanisms. Furthermore, monitoring elastic property changes in granular explosive pressings has not yet been demonstrated using RUS, which is an appealing non-destructive characterization tool that requires only dry point contact with the explosive material. To this end, we report the first study using RUS to quantify the elastic properties of binderized and neat PETN pressings as well as to quantify changes in elastic properties as a function of both thermal conditioning and bulk pressing density. Elastic stiffness coefficients, sometimes more commonly referred to as elastic constants, calculated from the RUS measurements on the different PETN-based materials show a significant increase for the post-conditioned samples compared to the pre-conditioned samples. This trend of increasing elastic properties with thermal conditioning was consistent for different density pressings, different thermal exposure conditions, and even different neat PETN pressings of differing average crystal sizes and/or specific surface areas.

36 MATERIALS SCIENCE↗

Beyond Graphene: Low-Symmetry and Anisotropic 2D Materials

Low-symmetry 2D materials—such as ReS 2 and ReSe 2 monolayers, black phosphorus monolayers, group-IV monochalcogenide monolayers, borophene, among others—have more complex atomistic structures than the honeycomb lattices of graphene, hexagonal boron nitride, and transition metal dichalcogenides. The reduced symmetries of these emerging materials give rise to inhomogeneous electron, optical, valley, and spin responses, as well as entirely new properties such as ferroelasticity, ferroelectricity, magnetism, spin-wave phenomena, large nonlinear optical properties, photogalvanic effects, and superconductivity. Novel electronic topological properties, nonlinear elastic properties, and structural phase transformations can also take place due to low symmetry. Lastly, the “Beyond Graphene: Low-Symmetry and Anisotropic 2D Materials” Special Topic was assembled to highlight recent experimental and theoretical research on these emerging materials.

2D materials↗

Mechanical Properties of Woven Composites at Ambient Temperature

This report describes the mechanical characterization of six types of woven composites that Sandia National Laboratories are interested in. These six composites have various combinations of two types of fibers (Carbon-IM7 and Glass-S2) and three types of resins (UF-3362, TC275-1, TC350-1). In this work, two sets of experiments were conducted: quasi-static loading with displacement rate of 2 mm/min (1.3x10 ^(-3) in/s) and high rate loading with displacement of 5.08 m/s (200 in/s). Quasi-static experiments were performed at three loading orientations of 0°, 45°, 90° for all the six composites to fully characterize their mechanical properties. The elastic properties Young's modulus and Poisson's ratio, as well as ultimate stress and strain were obtained from the quasi-static experiments. The high strain rate experiments were performed only on glass fiber composites along 0° angle of loading. The high rate experiments were mainly to study how the strain rate affects the ultimate stress of the glass-fiber composites with different resins.

36 MATERIALS SCIENCE↗