SEARCH · Search NASA

Results for “ELASTIC STABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Unsteady aerodynamic analysis of space shuttle vehicles. Part 3: Booster interference effects

An investigation of the interference flow field on the space-shuttle boost configuration has been made. The results show that the interference effects can dominate the shuttle aerodynamics. Vortices shed from shock-induced flow separations on the forward portion of the vehicle affect the aerodynamic loads on the aft portion of the booster. Thus, the forebody and aft-body flow fields are coupled. This coupling and the associated time lag due to the finite convection speed of the vortices furnish a mechanism whereby the unsteady aerodynamics can cause undamping of certain low frequency elastic modes of the booster. A preliminary order-of-magnitude analysis of the aeroelastic stability of the shuttle booster indicates that negative aerodynamic damping could occur for at least one bending mode and be of sufficient magnitude to dominate the structural damping. The implication of these results, (with the possibility of undamped oscillations leading to structural failure), is serious enough to warrant further, more detailed analysis.

Reding, J. P.↗

NASA NTRS1977

Forced motion of an initially stressed rectangular plate - An elasticity solution

An initially stressed rectangular plate is subjected to a transverse, time dependent load. The initial stress field is constant and parallel to two of the plate edges. The transverse load is uniformly distributed over a rectangular area, the sides of which are parallel to the sides of the plate. The problem is formulated within the framework of classical, three-dimensional elasticity theory, and an exact solution is obtained in series form. The case of static stability under pre-stress is also considered.

Reismann, H.↗

NASA NTRS1986

A fourth order accurate finite difference scheme for the computation of elastic waves

A finite difference for elastic waves is introduced. The model is based on the first order system of equations for the velocities and stresses. The differencing is fourth order accurate on the spatial derivatives and second order accurate in time. The model is tested on a series of examples including the Lamb problem, scattering from plane interf aces and scattering from a fluid-elastic interface. The scheme is shown to be effective for these problems. The accuracy and stability is insensitive to the Poisson ratio. For the class of problems considered here it is found that the fourth order scheme requires for two-thirds to one-half the resolution of a typical second order scheme to give comparable accuracy.

Bayliss, A.↗

NASA NTRS1990

On dynamic stability boundaries for binary systems

Dynamic stability boundaries are developed for linear two-degree-of-freedom systems with damping and elastic couplings. Special emphasis is placed on the influence of natural frequency proximity and those instabilities which stem from skew-symmetric stiffness properties. These arise in aeroelasticity and flight dynamics systems. Insight is provided into the destabilizing effects of the 'dreaded modal resonance' which results when the two natural frequencies in the modal natural frequency ratio match or nearly match.

Young, M. I.↗

NASA NTRS1996

Development of an Aeroelastic Code Based on an Euler/Navier-Stokes Aerodynamic Solver

This paper describes the development of an aeroelastic code (TURBO-AE) based on an Euler/Navier-Stokes unsteady aerodynamic analysis. A brief review of the relevant research in the area of propulsion aeroelasticity is presented. The paper briefly describes the original Euler/Navier-Stokes code (TURBO) and then details the development of the aeroelastic extensions. The aeroelastic formulation is described. The modeling of the dynamics of the blade using a modal approach is detailed, along with the grid deformation approach used to model the elastic deformation of the blade. The work-per-cycle approach used to evaluate aeroelastic stability is described. Representative results used to verify the code are presented. The paper concludes with an evaluation of the development thus far, and some plans for further development and validation of the TURBO-AE code.

Bakhle, Milind A.↗

NASA NTRS1971

Concepts for a theoretical and experimental study of lifting rotor random loads and vibrations. Phase 5B: Analysis of gust alleviation methods and rotor dynamic stability

The effects of various gust alleviation methods on the random blade response in flapping were studied analytically, assuming a rigid rotor support. The analytical model assumes rigid flapping blades with elastic root restraints. Linearized equations which are approximately valid at low lift conditions were used. Because of the interblade coupling from the feedback devices, the method of multiblade generalized coordinates was most convenient and was extended to include coning, differential coning, and warping of the rotor. The numerical examples cover the dynamic stability characteristics as affected by feedback gains of three- to six-bladed rotors. The number of blades had large effects on stability limits and modal time functions at these limits. The random flapping response of the blades to atmospheric turbulence was determined at 1.6 rotor advance ratio using feedback gains below the stability limit. The most effective reduction of the flapping response per unit gain was achieved with a rotor coning angle feedback.

Hohenemser, K. H.↗

NASA NTRS1979

Accelerated development and flight evaluation of active controls concepts for subsonic transport aircraft

The flight test of an active load alleviation/extended span for the L-1011 wide-body transport aircraft, and piloted simulation work leading to use of active stability augmentation with a small tail and aft center of gravity are reported. The extended span showed the expected cruise drag reduction of 3%. The small tail is expected to reduce cruise drag by another 3%, and eventual use of more aft center of gravity with active stability augmentation will provide further fuel savings. The active load alleviation functions included maneuver load control (MLC) and elastic mode suppression (EMS), using symmetric motions of the outboard ailerons to reduce wing bending loads in maneuvers or long-term up- or down-drafts (MLC), and to damp wing bending motions in turbulence (EMS). A gust load alleviation function using the active horizontal tail to provide airplane pitch damping in turbulence was found unnecessary. The piloted simulation tests evaluated criteria for augmentation-on and augmentation-off flying qualities. of a simple pitch control law was verified at neutral static margin. The simulation tasks established the basis for follow-on construction and flight testing of a small tail with active stability augmentation.

Source record↗

NASA NTRS2014

In-Flight Aeroelastic Stability of the Thermal Protection System on the NASA HIAD, Part I: Linear Theory

Conical shell theory and piston theory aerodynamics are used to study the aeroelastic stability of the thermal protection system (TPS) on the NASA Hypersonic Inflatable Aerodynamic Decelerator (HIAD). Structural models of the TPS consist of single or multiple orthotropic conical shell systems resting on several circumferential linear elastic supports. The shells in each model may have pinned (simply-supported) or elastically-supported edges. The Lagrangian is formulated in terms of the generalized coordinates for all displacements and the Rayleigh-Ritz method is used to derive the equations of motion. The natural modes of vibration and aeroelastic stability boundaries are found by calculating the eigenvalues and eigenvectors of a large coefficient matrix. When the in-flight configuration of the TPS is approximated as a single shell without elastic supports, asymmetric flutter in many circumferential waves is observed. When the elastic supports are included, the shell flutters symmetrically in zero circumferential waves. Structural damping is found to be important in this case. Aeroelastic models that consider the individual TPS layers as separate shells tend to flutter asymmetrically at high dynamic pressures relative to the single shell models. Several parameter studies also examine the effects of tension, orthotropicity, and elastic support stiffness.

Goldman, Benjamin D.↗

NASA NTRS1987

Robust controller synthesis for a large flexible space antenna

The linear-quadratic Gaussian/loop-transfer-recovery method is used to synthesize a fine-pointing control system for a large space antenna. A finite-element model for the 122-m hoop/column antenna is employed, and a compensator, utilizing attitudes sensors and torque actuators, is designed which achieves pointing performance while maintaining stability robustness to unmodeled dynamics. Inclusion of the rigid-body modes plus the first three elastic modes is found to be necessary to achieve a 0.1-rad/s bandwidth. Results are obtained by employing a modification of the standard robustness recovery procedure, which reduces the conservative nature of the design methodology. Performance degradation is encountered due to the presence of unavoidable invariant zeros within the design bandwidth.

Sundararajan, N.↗

NASA NTRS1975

Aeroelastic stability of trimmed helicopter blades in forward flight

Equations for moderately large amplitude coupled flap-lag motion of a torsionally rigid hingeless elastic helicopter blade in forward flight are derived. Quasi-steady aerodynamic loads are considered and the effects of reversed flow are included. By using Galerkin's method the spatial dependence of the problem is eliminated and the equations are linearized about a time dependent equilibrium position determined from the trimmed equilibrium position of the rotor in forward flight. In the first trim procedure the rotor is maintained at a fixed value of thrust coefficient with forward flight and horizontal and vertical force equilibrium is satisfied in addition to maintaining zero pitch and roll moments. The second trim procedure maintains only zero pitch and roll moment simulating conditions under which a rotor would be tested in the wind tunnel.

Friedmann, P.↗

NASA NTRS1974

Parachute dynamics and stability analysis

The nonlinear differential equations of motion for a general parachute-riser-payload system are developed. The resulting math model is then applied for analyzing the descent dynamics and stability characteristics of both the drogue stabilization phase and the main descent phase of the space shuttle solid rocket booster (SRB) recovery system. The formulation of the problem is characterized by a minimum number of simplifying assumptions and full application of state-of-the-art parachute technology. The parachute suspension lines and the parachute risers can be modeled as elastic elements, and the whole system may be subjected to specified wind and gust profiles in order to assess their effects on the stability of the recovery system.

Ibrahim, S. K.↗

NASA NTRS1974

Aeroelastic stability of coupled flap-lag motion of hingeless helicopter blades at arbitrary advance ratios

Equations for large amplitude coupled flap-lag motion of a hingeless elastic helicopter blade in forward flight are derived. Only a torsionally rigid blade excited by quasi-steady aerodynamic loads is considered. The effects of reversed flow together with some new terms due to radial flow are included. Using Galerkin's method the spatial dependence is eliminated and the equations are linearized about a suitable equilibrium position. The resulting system of homogeneous periodic equations is solved using multivariable Floquet-Liapunov theory, and the transition matrix at the end of the period is evaluated by two separate methods. Computational efficiency of the two numerical methods is compared. Results illustrating the effects of forward flight and various important blade parameters on the stability boundaries are presented.

Friedmann, P.↗

NASA NTRS1986

Influence of third-degree geometric nonlinearities on the vibration and stability of pretwisted, preconed, rotating blades

The governing coupled flapwise bending, edgewise bending, and torsional equations are derived including third-degree geometric nonlinear elastic terms by making use of the geometric nonlinear theory of elasticity in which the elongations and shears are negligible compared to unity. These equations are specialized for blades of doubly symmetric cross section with linear variation of pretwist over the blade length. The nonlinear steady state equations and the linearized perturbation equations are solved by using the Galerkin method, and by utilizing the nonrotating normal modes for the shape functions. Parametric results obtained for various cases of rotating blades from the present theoretical formulation are compared to those produced from the finite element code MSC/NASTRAN, and also to those produced from an in-house experimental test rig. It is shown that the spurious instabilities, observed for thin, rotating blades when second degree geometric nonlinearities are used, can be eliminated by including the third-degree elastic nonlinear terms. Furthermore, inclusion of third degree terms improves the correlation between the theory and experiment.

Subrahmanyam, K. B.↗

NASA NTRS1987

Influence of third-degree geometric nonlinearities on the vibration and stability of pretwisted, preconed, rotating blades

The governing coupled flapwise bending, edgewise bending, and torsional equations are derived including third-degree goemetric nonlinear elastic terms by making use of the geometric nonlinear theory of elasticity in which the elongations and shears are negligible compared to unity. These equations are specialized for blades of doubly symmetric cross section with linear variation of Pretwist over the blade length. The nonlinear steady state equations and the linearized perturbation equations are solved by using the Galerkin method, and by utilizing the nonrotating normal modes for the shape functions. Parametric results obtained for various cases of rotating blades from the present theoretical formulation are compared to those produced from the finite element code MSC/NASTRAN, and also to those produced from an in-house experimental test rig. It is shown that the spurious instabilities, observed for thin, rotating blades when second degree geometric nonlinearities are used, can be eliminated by including the third-degree elastic nonlinear terms. Furthermore, inclusion of third degree terms improves the correlation between the theory and experiment.

Subrahmanyam, K. B.↗

NASA NTRS2001

Stability Result For Dynamic Inversion Devised to Control Large Flexible Aircraft

High performance aircraft of the future will be designed lighter, more maneuverable, and operate over an ever expanding flight envelope. One of the largest differences from the flight control perspective between current and future advanced aircraft is elasticity. Over the last decade, dynamic inversion methodology has gained considerable popularity in application to highly maneuverable fighter aircraft, which were treated as rigid vehicles. This paper is an initial attempt to establish global stability results for dynamic inversion methodology as applied to a large, flexible aircraft. This work builds on a previous result for rigid fighter aircraft and adds a new level of complexity that is the flexible aircraft dynamics, which cannot be ignored even in the most basic flight control. The results arise from observations of the control laws designed for a new generation of the High-Speed Civil Transport aircraft.

Gregory, Irene M.↗

NASA NTRS1976

Dynamics and identification of flexible aircraft

The equations of motion and a maximum likelihood parameter identification formulation are developed for a flexible aircraft. The various levels of approximation associated with the modal substitution representation of the elastic displacement field are discussed and illustrated when appropriate. The necessary extension of the parameter set of stability and control derivatives due to the aeroelastic effects is obtained.

Wells, W. R.↗

NASA NTRS1977

Unsteady aerodynamic modeling and active aeroelastic control

Unsteady aerodynamic modeling techniques are developed and applied to the study of active control of elastic vehicles. The problem of active control of a supercritical flutter mode poses a definite design goal stability, and is treated in detail. The transfer functions relating the arbitrary airfoil motions to the airloads are derived from the Laplace transforms of the linearized airload expressions for incompressible two dimensional flow. The transfer function relating the motions to the circulatory part of these loads is recognized as the Theodorsen function extended to complex values of reduced frequency, and is termed the generalized Theodorsen function. Inversion of the Laplace transforms yields exact transient airloads and airfoil motions. Exact root loci of aeroelastic modes are calculated, providing quantitative information regarding subcritical and supercritical flutter conditions.

Edwards, J. W.↗

NASA NTRS1982

Tenth NASTRAN User's Colloquium

The development of the NASTRAN computer program, a general purpose finite element computer code for structural analysis, was discussed. The application and development of NASTRAN is presented in the following topics: improvements and enhancements; developments of pre and postprocessors; interactive review system; the use of harmonic expansions in magnetic field problems; improving a dynamic model with test data using Linwood; solution of axisymmetric fluid structure interaction problems; large displacements and stability analysis of nonlinear propeller structures; prediction of bead area contact load at the tire wheel interface; elastic plastic analysis of an overloaded breech ring; finite element solution of torsion and other 2-D Poisson equations; new capability for elastic aircraft airloads; usage of substructuring analysis in the get away special program; solving symmetric structures with nonsymmetric loads; evaluation and reduction of errors induced by Guyan transformation.

Source record↗