Search NASA⌕ Search

SEARCH · Search NASA

Results for “ENERGETICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Energetic Particle Propagation in the Inner Heliosphere as Deduced from Low Frequency (less than 100 kHz) Observations of Type III Radio Bursts

Solar energetic particle (SEP) events are well-associated with solar flares. It is observed that the delay between the time of the flare and the first-arriving particles at a spacecraft increases with increasing difference between the flare longitude and the footpoint of the field line on which the spacecraft is located. This difference we call the "connection angle" and can be as large as approximately 120 deg. Recently it has been found that all SEP events are preceded by type III radio bursts. These bursts are plasma emission caused by the propagation of 2-50 keV flare electrons through the solar corona and into the solar wind. The drift of these type III radio bursts to lower and lower frequencies enables the propagation of the flare electrons to be traced from the Sun to about 1 AU. We have made an extensive analysis of the type III bursts associated with greater than 20 MeV proton events and find that, in most cases, the radio emission extends to the local plasma frequency when the energetic particles arrive within a few hours of the flare. We conclude that this emission at the lowest possible frequency is generated close to the spacecraft. We then use the time from when the burst started at the Sun to when it reached the local plasma frequency to infer the time it took the radio producing electrons to travel to the spacecraft. We find that these delay times are organized by the connection angle and correlate with the proton delay times. We also find that the differences between the radio delays at Wind and Ulysses are matched by differences in the relative arrival times of the energetic particles at the two spacecraft. The consistent timing between the relative arrival times of energetic electrons and protons and the start of the lowest frequency radio emissions suggests that the first arriving particles of both species are accelerated as part of the flare process and that they propagate to the spacecraft along trajectories similar to those of the lower energy flare electrons. To be detected by observers at locations distant from the nominal field lines originating in the flaring regions the particles must undergo lateral transport. The continuity of the radio bursts suggests that the cross-field transport may occur in the interplanetary medium.

Cane, H. V.↗

Coastal Mudflat Accretion under Energetic Conditions, Louisiana Chenier-Plain Coast, USA

Mudflat accretion on the chenier-plain coast of Louisiana, northern Gulf of Mexico, is anomalous in an area that otherwise experiences widespread land loss due to rapid relative sea level rise. Accretion is shown to be related to energetic events (Winta cold fronts and occasional tropical-dcprrssion srmms) using a 17-year record of meteorological conditions and aerial surveys The results indicate substantial differences between the behavior of sand- and mud-dominated coastal systems under energetic conditions. Comparison of the Louisiana chenier plain to other mud-rich coasts indicates that certain conditions are necessary for mudflat accretion to occur during energetic atmospheric activity. These include an abundant supply of fine-grained fluvial sediment and resuspension events that maintain an unconsolidated sea floor, dominant onshore wind direction during energetic conditions, particularly when onshore winds coincide with high fluvial sediment input to the coastal ocean, and a low tidal range.

Draut, Amy E.↗

Heliospheric Observations of Energetic Particles

Heliospheric observations of energetic particles have shown that, on long time averages, a consistent v^-5 power-law index arises even in the absence of transient events. This implies an ubiquitous acceleration process present in the solar wind that is required to generate these power-law tails and maintain them against adiabatic losses and coulomb-collisions which will cool and thermalize the plasma respectively. Though the details of this acceleration process are being debated within the community, most agree that the energy required for these tails comes from fluctuations in the magnetic field which are damped as the energy is transferred to particles. Given this source for the tail, is it then reasonable to assume that the turbulent LISM should give rise to such a power-law tail as well? IBEX observations clearly show a power-law tail of index approximately -5 in energetic neutral atoms. The simplest explanation for the origins of these ENAs are that they are energetic ions which have charge-exchanged with a neutral atom. However, this would imply that energetic ions possess a v^-5 power-law distribution at keV energies at the source of these ENAs. If the source is presumed to be the LISM, it provides additional options for explaining the, so called, IBEX ribbon. This presentation will discuss some of these options as well as potential mechanisms for the generation of a power-law spectrum in the LISM.

Summerlin, Errol J.↗

Global Energetics of Large Solar Eruptive Events

We have evaluated the energetics of the larger solar eruptive events recorded with a variety of spacecraft instruments between February 2002 and December 2006. All of the energetically important components of the flares and of the accompanying coronal mass ejections and solar energetic particles have been evaluated as accurately as the observations allow. These components include the following : (1) the total energy in the high temperature plasma determined from the RHESSI thermal X-ray observations; (2) the total energies in accelerated electrons above 20 keV and ions above 1 MeV from RHESSI hard X-ray and gamma-ray observations, respectively; (3) the potential and kinetic energies of the CME from SOHO/LASCO observations; (4) the solar energetic particle (SEP) energy estimates from in situ measurements on ACE, GOES, and SOHO; (5) the total radiated energy from the SORCEITSI measurements where available, and otherwise from the Flare Irradiance Spectral Model (FISM). The results are assimilated and discussed relative to the probable amount of non potential magnetic energy estimated to be available in the flaring active regions from MDI line-of-sight magnetograms.

Dennis, Brian R.↗

Formulation and Testing of Paraffin-Based Solid Fuels Containing Energetic Additives for Hybrid Rockets

Many approaches have been considered in an effort to improve the regression rate of solid fuels for hybrid rocket applications. One promising method is to use a fuel with a fast burning rate such as paraffin wax; however, additional performance increases to the fuel regression rate are necessary to make the fuel a viable candidate to replace current launch propulsion systems. The addition of energetic and/or nano-sized particles is one way to increase mass-burning rates of the solid fuels and increase the overall performance of the hybrid rocket motor.1,2 Several paraffin-based fuel grains with various energetic additives (e.g., lithium aluminum hydride (LiAlH4) have been cast in an attempt to improve regression rates. There are two major advantages to introducing LiAlH4 additive into the solid fuel matrix: 1) the increased characteristic velocity, 2) decreased dependency of Isp on oxidizer-to-fuel ratio. The testing and characterization of these solid-fuel grains have shown that continued work is necessary to eliminate unburned/unreacted fuel in downstream sections of the test apparatus.3 Changes to the fuel matrix include higher melting point wax and smaller energetic additive particles. The reduction in particle size through various methods can result in more homogeneous grain structure. The higher melting point wax can serve to reduce the melt-layer thickness, allowing the LiAlH4 particles to react closer to the burning surface, thus increasing the heat feedback rate and fuel regression rate. In addition to the formulation of LiAlH4 and paraffin wax solid-fuel grains, liquid additives of triethylaluminum and diisobutylaluminum hydride will be included in this study. Another promising fuel formulation consideration is to incorporate a small percentage of RDX as an additive to paraffin. A novel casting technique will be used by dissolving RDX in a solvent to crystallize the energetic additive. After dissolving the RDX in a solvent chosen for its compatibility with both paraffin and RDX, the mixture will be combined with the melted paraffin. With the melting point of the paraffin far below the decomposition temperature of the RDX, the solvent will be boiled off, leaving the crystallized RDX embedded in the paraffin. At low percentages of RDX additive and with crystallized RDX surrounded by paraffin, the fuel grains will remain inert, maintaining a key benefit of hybrids in the safety of the solid fuel.

Larson, Daniel B.↗

Inverse Energy Dispersion of Energetic Ions Observed in the Magnetosheath

We present a case study of energetic ions observed by the Energetic Particle Detector (EPD) on the Magnetospheric Multiscale spacecraft in the magnetosheath just outside the subsolar magnetopause that occurred at 1000 UT on 8 December 2015. As the magnetopause receded inward, the EPD observed a burst of energetic (approximately 50-1000 keV) proton, helium, and oxygen ions that exhibited an inverse dispersion, with the lowest energy ions appearing first. The prolonged interval of fast antisunward flow observed in the magnetosheath and transient increases in the H components of global ground magnetograms demonstrate that the burst appeared at a time when the magnetosphere was rapidly compressed. We attribute the inverse energy dispersion to the leakage along reconnected magnetic field lines of betatron-accelerated energetic ions in the magnetosheath, and a burst of reconnection has an extent of about 1.5 R(sub E) using combined Super Dual Auroral Radar Network radar and EPD observations.

Lee, S. H.↗

Synthesis of 3-D Coronal-Solar Wind Energetic Particle Acceleration Modules

Acute space radiation hazards pose one of the most serious risks to future human and robotic exploration. Large solar energetic particle (SEP) events are dangerous to astronauts and equipment. The ability to predict when and where large SEPs will occur is necessary in order to mitigate their hazards. The Coronal-Solar Wind Energetic Particle Acceleration (C-SWEPA) modeling effort in the NASANSF Space Weather Modeling Collaborative [Schunk, 2014] combines two successful Living With a Star (LWS) (http:lws.gsfc.nasa.gov) strategic capabilities: the Earth-Moon-Mars Radiation Environment Modules (EMMREM)[Schwadron et al., 2010] that describe energetic particles and their effects, with the Next Generation Model forthe Corona and Solar Wind developed by the Predictive Science, Inc. (PSI) group. The goal of the C-WEPA effort is to develop a coupled model that describes the conditions of the corona, solar wind, coronal mass ejections (CMEs) and associated shocks, particle acceleration, and propagation via physics-based modules. Assessing the threat of SEPs is a difficult problem. The largest SEPs typically arise in conjunction with X classflares and very fast (1000 kms) CMEs. These events are usually associated with complex sunspot groups(also known as active regions) that harbor strong, stressed magnetic fields. Highly energetic protonsgenerated in these events travel near the speed of light and can arrive at Earth minutes after the eruptiveevent. The generation of these particles is, in turn, believed to be primarily associated with the shock waveformed very low in the corona by the passage of the CME (injection of particles fromthe flare sitemay also playa role). Whether these particles actually reach Earth (or any other point) depends on their transport in theinterplanetary magnetic field and their magnetic connection to the shock.

exploration↗

Energetic Particles of Cosmic Accelerators I: Galactic Accelerators

The high-energy universe has revealed that energetic particles are ubiquitous in the cosmos and play a vital role in the cultivation of cosmic environments on all scales. Our pursuit of more than a century to uncover the origins and fate of these cosmic energetic particles has given rise to some of the most interesting and challenging questions in astrophysics. Energetic particles in our own galaxy, galactic cosmic rays (GCRs), engage in a complex interplay with the interstellar medium and magnetic fields in the galaxy, giving rise to many of its key characteristics. For instance, GCRs act in concert with galactic magnetic fields to support its disk against its own weight. GCR ionization and heating are essential ingredients in promoting and regulating the formation of stars and protostellar disks. GCR ionization also drives astrochemistry, leading to the build up of complex molecules in the interstellar medium. GCR transport throughout the galaxy generates and maintains turbulence in the interstellar medium, alters its multi-phase structure, and amplifies magnetic fields. GCRs could even launch galactic winds that enrich the circumgalactic medium and alter the structure and evolution of galactic disks. As crucial as they are for many of the varied phenomena in our galaxy, there is still much we do not understand about GCRs. While they have been linked to supernova remnants (SNRs), it remains unclear whether these objects can fully account for their entire population, particularly at the lower (approximately less than 1 GeV per nucleon) and higher (~PeV) ends of the spectrum. In fact, it is entirely possible that the SNRs that have been found to accelerate CRs merely re-accelerate them, leaving the origins of the original GCRs a mystery. The conditions for particle acceleration that make SNRs compelling source candidates are also likely to be present in sources such as protostellar jets, superbubbles, and colliding wind binaries (CWBs), but we have yet to ascertain their roles in producing GCRs. For that matter, key details of diffusive shock acceleration (DSA) have yet to be revealed, and it remains to be seen whether DSA can adequately explain particle acceleration in the cosmos. This White Paper is the first of a two-part series highlighting the most well-known high-energy cosmic accelerators and contributions that MeV gamma-ray astronomy will bring to understanding their energetic particle phenomena. For the case of GCRs, MeV astronomy will: 1) Search for fresh acceleration of GCRs in SNRs; 2) Test the DSA process, particularly in SNRs and CWBs; 3) Search for signs of CR acceleration in protostellar jets and superbubbles.

Venters, Tonia M.↗

Very Narrow Coronal Mass Ejections Producing Solar Energetic Particles

Aims. Our main aim is to study the relationship between low-energy solar particles (energies below 1 MeV) and very narrow coronal mass ejections (“jets” with angular width ≤ 20°). Methods. For this purpose, we considered 125 very narrow coronal mass ejections (CMEs) from 1999 to 2003 that are potentially associated with low-energy solar particles (LESPs). These events were chosen on the basis of their source location. We studied only very narrow CMEs at the western limb, which are expected to have good magnetic connectivity with Earth. Results. We found 24 very narrow CMEs associated with energetic particles such as ions (protons and 3He), electrons, or both. We show that arrival times at Earth of energetic particles are consistent with onset times of the respective CMEs, and that in the same time intervals, there are no other potential sources of energetic particles. We also demonstrate statistical differences for the angular width distributions using the Kolmogorov–Smirnov test for angular widths for these 24 events. We consider a coherent sample of jets (mostly originating from boundaries of coronal holes) to identify properties of events that produce solar energetic particles (velocities, widths, and position angles). Our study presents a new approach and result: very narrow CMEs can generate low-energy particles in the vicinity of Earth without other activity on the Sun. The results could be very useful for space weather forecasting.

Bronarska, K.↗

Stellar Energetic Particle-driven Production of Biologically Relevant Molecules in Atmospheres of Young Earth-like Exoplanets

The chemistry of N2, CO2, CH4-rich atmospheres of terrestrial-type exoplanets around active G-K stars is a complex problem. The star's energetic inputs in the atmospheres take the form of ionizing radiation in the form of X-ray, Extreme UV, as well as precipitating energetic particles that were accelerated in coronal mass ejection-driven shocks. These inputs lead to the ionization and dissociation of the atmospheric species, which enable complex chemical processes resulting in the creation of molecules of interest for both astrobiology and climate (Airapetian et al., 2016; Hayworth et al. 2022). We developed a set of atmospheric models to simulate the formation of organic molecules that can be considered as atmospheric pre-biosignatures from exoplanets around active stars. They take into account the dissociations and ionizations from all the energetic inputs in the atmosphere as well as their role in the enhanced chemistry in the lower atmosphere. In addition, the evaluation of stellar energetic particle fluxes is done using the latest techniques to accurately highlight the depth at which the chemistry is enabled. These models were used to simulate the chemistry of several young terrestrial-type exoplanets resembling the Hadean Earth to highlight the creation of atmospheric pre-biosignatures and relevant greenhouse gases, in function of different scenarios for its atmospheric evolution. This work shows the importance of space weather in the chemical evolution of atmospheres of astrobiological interest.

Guillaume Gronof↗

The 17 April 2021 Widespread Solar Energetic Particle Event

A complex and long-lasting solar eruption on 17 April 2021 produced a widespread solar energetic particle (SEP) event that was observed by five longitudinally well-separated observers in the inner heliosphere that covered distances to the Sun from 0.42 to 1 au: BepiColombo, Parker Solar Probe, Solar Orbiter, STEREO A, and near-Earth spacecraft. The event was the second widespread SEP event detected in solar cycle 25, and it produced relativistic electrons and protons. It was associated with a long-lasting solar hard X-ray flare that showed multiple hard X-ray peaks over a duration of one hour. The event was further accompanied by a medium-fast coronal mass ejection (CME) with a speed of 880 km s -1 that drove a shock, an extreme ultraviolet wave, and long-lasting and complex radio burst activity that showed four distinct type III burst groups over a period of 40 min. We aim to understand the reason for the wide spread of elevated SEP intensities in the inner heliosphere as well as identify the underlying source regions of the observed energetic electrons and protons. We applied a comprehensive multi-spacecraft analysis of remote-sensing observations and in situ measurements of the energetic particles and interplanetary context to attribute the SEP observations at the different locations to the various potential source regions at the Sun. We used an ENLIL simulation to characterize the complex interplanetary state and its role in the energetic particle transport. The magnetic connection between each spacecraft and the Sun was determined using ballistic backmapping in combination with potential field source surface extrapolations in the lower corona. Using also a reconstruction of the coronal shock front, we then determined the times when the shock establishes magnetic connections with the different observers. Radio observations were used to characterize the directivity of the four main injection episodes, which were then employed in a 2D SEP transport simulation to test the importance of these different injection episodes. A comprehensive timing analysis of the inferred solar injection times of the SEPs observed at each spacecraft suggests different source processes being important for the electron and proton events. Comparison among the characteristics and timing of the potential particle sources, such as the CME-driven shock or the flare, suggests a stronger shock contribution for the proton event and a more likely flare-related source for the electron event. In contrast to earlier studies on widespread SEP events, we find that in this event an important ingredient for the wide SEP spread was the wide longitudinal range of about 110 o covered by distinct SEP injections, which is also supported by our SEP transport modeling.

sun↗

Organized energetic composites based on micro and nanostructures and methods thereof

An ordered energetic composite structure according to one embodiment includes an ordered array of metal fuel portions; and an oxidizer in gaps located between the metal fuel portions. An ordered energetic composite structure according to another embodiment includes at least one metal fuel portion having an ordered array of nanopores; and an oxidizer in the nanopores. A method for forming an ordered energetic composite structure according to one embodiment includes forming an ordered array of metal fuel portions; and depositing an oxidizer in gaps located between the metal fuel portions. A method for forming an ordered energetic composite structure according to another embodiment includes forming an ordered array of nanopores in at least one metal fuel portion; and depositing an oxidizer in the nanopores.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

MHD MODES DESTABILIZED BY ENERGETIC IONS ON LHD

nergetic ion driven magnetohydrodynamic instabilities such as Alfven eigenmodes (AEs), energetic particle modes (EPMs), and their impacts on energetic ion confinement are being studied on the Large Helical Device (LHD). The magnetic configuration of this device is three dimensional and has negative magnetic shear over a whole radial region in the low-beta regime. Two types of toroidicity-induced Alfven eigenmodes (TAEs) are typically observed in LHD plasmas that are heated by tangential neutral beam injection: One is localized in the plasma core region near a central TAE gap and the other is a global TAE having a radially extended eigenfunction. Core-localized TAEs with even and odd radial mode parities are often observed. The global TAE is usually observed in medium- to high-beta plasmas where broad regions with low magnetic shear are present. Helicity-induced Alfven eigenmodes (HAEs), which exist in gaps unique to three-dimensional plasmas that have both toroidal and poloidal mode couplings, were detected for the first time. Recently, reversed magnetic shear Alfven eigenmodes (RSAEs) having characteristic frequency sweeping were discovered in reversed magnetic shear (RS) plasmas produced by intense counter-neutral beam current drive. In the RS plasma, the geodesic acoustic mode (GAM) excited by energetic ions, which is a global-type mode different from localized GAM excited by drift waves, was also detected for the first time in a helical plasma. Nonlinear couplings between RSAE and GAM modes and also between two TAEs were observed. Bursts of TAEs and EPMs often enhance radial transport and loss of energetic ions at low toroidal magnetic field (<0.75 T).

Toi, K.↗

Method for forming energetic nanopowders

A method for the preparation of neat energetic powders, having nanometer dimensions, is described herein. For these neat powder, a solution of a chosen energetic material is prepared in an aprotic solvent and later combined with liquid hexane that is miscible with such solvent. The energetic material chosen is less soluble in the liquid hexane than in the aprotic solvent and the liquid hexane is cooled to a temperature that is below that of the solvent solution. In order to form a precipitate of said neat powders, the solvent solution is rapidly combined with the liquid hexane. When the resulting precipitate is collected, it may be dried and filtered to yield an energetic nanopowder material.

36 MATERIALS SCIENCE↗

THE ODTX SYSTEM FOR THERMAL IGNITION AND THERMAL SAFETY STUDY OF ENERGETIC MATERIALS

Understanding the response of energetic material to thermal event is very important for the storage and handling of energetic materials. The One Dimensional Time to Explosion (ODTX) system at the Lawrence Livermore National Laboratory (LLNL) can precisely measure times to explosion and minimum ignition temperatures of energetic materials at elevated temperatures. These measurements provide insight into the relative ease of thermal ignition and allow for the determination of kinetic parameters. The ODTX system can potentialy be a good tool to measure violence of the thermal ignition by monitoring the size of anvil cavity. Recent ODTX experimental data on various energetic materials (solid and liquids) are reported in this paper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Centrarchid Energetics

This chapter contains sections titled: (1) Introduction; (2) Centrarchid bioenergetics models; (3) Food consumption and feeding energetics; (4) Metabolic rate; (5) Energetic wastes (egestion, excretion, and SDA); (6) Growth energetics; (7) Reproductive energetics; (8) Synthesis; (9) Research needs; and (10) References.

59 BASIC BIOLOGICAL SCIENCES↗

Characterization of energetic formulations optimized for optical initiation

Many experimental systems ignite energetic materials using lasers or other optical means. The ignition criteria can be different for each material, and will be dependent, at least, on the wavelength, power, energy density, and coherence of the light used. many of the more common energetic materials, such as HMX, PETN or RDX, are very poor light absorbers and are difficult to ignite optically, therefore the addition of a small amount ({approx} 1% by weight) of activated carbon aids in light absorption and thus ignition. However, these materials still suffer in terms of relatively large energy requirements and slow ignition times. Other materials, such ad DAATO{sub 3.5} (mixed N-oxide of 3,3-azo-bis(6-amino-1,2,4,5-tetrazine)), will ignite just from the energy supplied by a common camera flash, have very fast low-pressure burning rates, and due to decomposition mechanisms dominated by condensed phase reactions, have fast ignition times. Furthermore, the required ignition energies could be further reduced by the addition of nano-particulate transition metals (e.g. nano silver). by combining materials that are more optically sensitive with materials that are more explosively functional, interesting energetic systems with unique initiation criteria can be formulated. The optical characteristics of these formulations are examined using a 1064 nm Big Sky Nd:YAG laser and fiber optic system focused through a GRIN lens and into the sample, which is encased in a lexan holder. The energy from the laser is varied, from {approx} 0.7 mJ to {approx} 17 mJ, using neutral density filters, and is delivered in an {approx} 27.5 ns pulse. The energetic material is mixed with ethanol and slurry cast into the assembly. There are two types of ignition criteria detectable in these experiments. The first is a simple go/no-go criterion, in which any observable reaction is considered ignition, regardless of its violence. The second type requires both ignition and propagation of the reaction. By characterizing the energy required to initiate several different materials, more effective formulations can be designed using the better performing materials. Presented here are the results of laser initiation tests on a variety of compositions, principally combinations of PETN, DAATO{sub 3.5}, HMX, Ag{sub 2}BTA (silver bistetrazolamine), CuBTA, BNCP (bis-5-nitrotetrazolato tetraamine cobalt perchloriate), nm Ag, and a variety of MICs (metastable intermolecular compounds). Also presented are the conclusions as to which formulations are most suitable for optically initiated systems.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Hybrid simulation of energetic particles interacting with magnetohydrodynamics using a slow manifold algorithm and GPU acceleration

The hybrid method combining particle-in-cell and magnetohydrodynamics can be used to study the interaction between energetic particles and global plasma modes. In this paper we introduce the M3D-C1-K code, which is developed based on the M3D-C1 finite element code solving the magnetohydrodynamics equations, with a newly developed kinetic module simulating energetic particles. The particle pushing is done using a new algorithm by applying the Boris pusher to the classical Pauli particles to simulate the slow-manifold of particle orbits, with long-term accuracy and fidelity. The particle pushing can be accelerated using GPUs with a significant speedup. The moments of the particles are calculated using the δƒ method, and are coupled into the magnetohydrodynamics simulation through pressure or current coupling schemes. Several linear simulations of magnetohydrodynamics modes driven by energetic particles have been conducted using M3D-C1-K with the δƒ method, including fishbone, toroidal Alfvén eigenmodes and reversed shear Alfvén eigenmodes. Good agreement with previous results from other eigenvalue, kinetic and hybrid codes have been achieved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗