Search NASA⌕ Search

SEARCH · Search NASA

Results for “EQUATIONS - DRAG, PROFILE - WRIGHT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Comparison of multiequation turbulence models for several shock-separated boundary-layer interaction flows

Several multiequation eddy viscosity models of turbulence are used with the Navier-Stokes equations to compute three classes of experimentally documented shock-separated turbulent boundary-layer flows. The types of flow studied are: (1) a normal shock at transonic speeds in both a circular duct and a two-dimensional channel; (2) an incident oblique shock at supersonic speeds on a flat surface; and (3) a two-dimensional compression corner at supersonic speeds. Established zero-equation (algebraic), one-equation (kinetic energy), and two-equation (kinetic energy plus length scale) turbulence models are each utilized to describe the Reynolds shear stress for the three classes of flows. These models are assessed by comparing the calculated values of skin friction, wall pressure distribution, velocity, Mach number, and turbulent kinetic energy profiles with experimental measurements. Of the models tested the two-equation model results gave the best overall agreement with the data.

Viegas, J. R.↗
NASA NTRS1972

Calculation of turbulent boundary layers with heat transfer and pressure gradient utilizing a compressibility transformation. Part 2: Constant property turbulent boundary layer flow with simultaneous mass transfer and pressure gradient

An analysis of the incompressible turbulent boundary layer, developing under the combined effects of mass transfer and pressure gradient, is presented in this paper. A strip-integral method is employed whereby two of the three governing equations are obtained by integrating the combined momentum and continuity equation to 50 percent and 100 percent, respectively, of the boundary-layer height. The latter equation is the usual momentum-integral equation; the former equation requires specification of shear. Accordingly, Clauser's equilibrium eddy-viscosity law is assumed valid at this point. The third and final equation is obtained by specifying that Stevenson's velocity profiles apply throughout the domain of interest, from which a skin-friction law can be derived. Comparisons of the numerical results with the experiments of McQuaid, which include combined effects of variable pressure gradient and mass transfer, show good agreement.

Boccio, J.↗
NASA NTRS1977

Io's sodium emission profiles - Variations due to Io's phase and magnetic latitude

We present recent measurements of high-resolution sodium D2 emission line profiles of Io's atmosphere and cloud. The high-velocity skirts of these profiles are strongest when Io is on the magnetic equator where protons and heavy ions, which sputter atoms from Io's surface, are concentrated. The skirts are most prominent on the long-wavelength side of the line when Io is west of Jupiter, and they are most prominent on the short-wavelength side of the line when Io is east of Jupiter. Our observations also indicate that there is a shift in the emission peak with respect to Io which is correlated with Io's orbital phase angle.

Trafton, L.↗
NASA NTRS1985

A multiple-scales model of the shock-cell structure of imperfectly expanded supersonic jets

The present investigation is concerned with the development of an analytical model of the quasi-periodic shock-cell structure of an imperfectly expanded supersonic jet. The investigation represents a part of a program to develop a mathematical theory of broadband shock-associated noise of supersonic jets. Tam and Tanna (1982) have suggested that this type of noise is generated by the weak interaction between the quasi-periodic shock cells and the downstream-propagating large turbulence structures in the mixing layer of the jet. In the model developed in this paper, the effect of turbulence in the mixing layer of the jet is simulated by the addition of turbulent eddy-viscosity terms to the momentum equation. Attention is given to the mean-flow profile and the numerical solution, and a comparison of the numerical results with experimental data.

Tam, C. K. W.↗
NASA NTRS1985

The magnetic and thermodynamical structure of a coronal hole

A nonpolytropic model of a polar coronal hole of 2-5 solar radii constructed. The main assumptions are: (1) the magnetic structure of the sun can be described by a combination of dipole-like and radial fields; (2) in the magnetically dominated region rho(nu sq/2) much less than B sq/8 pi the influence of the outflow on the magnetic structure is negligible. The magnetic and thermodynamic structures are obtained by solving the force balance equation for plasma with the observationally derived electron density. Profiles of velocities in the acceleration regime are presented and the influence of the outflow on the thermodynamic structure of the solar corona above the polar region is discussed.

Osherovich, V. A.↗
NASA NTRS1989

Variability of quasi-stationary planetary waves

The results of the analysis of nonzonal perturbations (m = 1, 2, 3) of the geopotential field at a 30 mb level are presented. A long period modulation of the harmonics' amplitude is discovered. Calculations of eigenfunctions and eigennumbers of the Laplace tidal equation are carried out for a real latitudinal wind profile. The observed first zonal harmonic in different years is caused by the same mode. Thus, the difference in the wave amplitudes could not be accounted for by the difference in stratospheric zonal circulation in different years and should be related to tropospheric processes.

Krivolutsky, A. A.↗
NASA NTRS1991

Characterization of directionally solidified Hg(1-x)Zn(x)Se semiconducting alloys

Hg(1-x)Zn(x)Se alloys with composition between x = 0.08 and 0.115 were synthesized from elemental constituents and were resolidified using a Bridgman-Stockbarger growth technique. By performing precision mass-density measurements on selected wafers cut perpendicular to the growth axis, it was shown that the axial compositional profiles fit a numerical solution to the 1D diffusion equation which takes into account the variation of interface velocity with time. Infrared transmission-edge measurements performed on selected transverse slices from each ingot showed that the relative radial variations in composition decreased with decreasing growth rate. Van der Pauw measurements on selected wafers showed that the 10 exp 18/cu cm electron concentration, typical of as-grown crystals, could be reduced by approximately an order of magnitude by annealing in Se vapor.

Cobb, S. D.↗
NASA NTRS1994

The energetics of Titan's ionosphere

We have developed a comprehensive model to study the dynamics and energetics of the ionosphere of Titan. We solved the one-dimensional, time-dependent, coupled continuity and momentum equations for several ion species, together with single ion and electron energy equations, in order to calculate density, velocity, and temperature profiles. Calculations were carried out for several cases corresponding to different local times and configurations of the Titan-Saturn system. In our model the effects of horizontal magnetic fields were assumed to be negligible, except for their effect on reducing the electron and ion thermal conductivities and inhibiting vertical transport in the subram region. The ionospheric density peak was found to be at an altitude of about 1100 km, in accordance with earlier model calculations. The ionosphere is chemically controlled below an altitude of about 1500 km. Above this level, ion densities differ significantly from their chemical equilibrium values due to strong upward ion velocities. Heat is deposited in a narrow region around the ionospheric peak, resulting in temperature profiles increasing sharply and reaching nearly constant values of 800-1000 deg K for electrons and 300 deg K for ions in the topside, assuming conditions appropriate for the wake region. In the subram region magnetic correction factors make the electron heat conductivities negligible, resulting in electron temperatures increasing strongly with altitude and reaching values in the order of 5000 deg K at our upper boundary located at 2200 km. Ion chemical heating is found to play an important role in shaping the ion energy balance in Titan's ionosphere.

Roboz, A.↗
NASA NTRS1994

Middle- and low-latitude emissions from energetic neutral atom precipitation seen from ATLAS 1 under quiet magnetic conditions

During the ATLAS 1 mission spectral observations were made at middle and low latitudes of features expected from the precipitation of energetic neutral atoms. The Imaging Spectrometric Observatory was used at night in the UV and visible with maximum gain. The tangent ray heights of the look directions ranged from near 100 km to near 200 km, and the geomagnetic conditions were quiet during the observations, which were made March 28 to April 3, 1992. The N2(+) 1N 391.4-nm and O I 130.4 and 135.6-nm emissions were observed at all latitudes, with lower emission rates at lower magnetic dip latitudes, except that enhancements in the O I lines were seen within 30 deg of the dip equator to radiative recombination of ionospheric plasma. The latitude profile observed for the N2(+) 1N emission did not show an equatorial or midlatitude peak. This implies that the source of energetic neutrals is more consistent with prompt charge exchange loss of freshly injected trapped ions with relatively low mirror heights (i.e., ions on higher L shells with equatorial pitch angle distributions nearly isotropic to the loss cone) than loss of highly eroded populations of particles with high mirror heights (i.e., ions on lower L shells with pancake equatorial pitch angle distributions). The N2(+) 1N emission rates have been compared with models of atmospheric emission due to fluxes of O/O(+) and H/H(+) in the thermosphere, as produced by energetic neutral oxygen or hydrogen atom precipitation. Energy deposition rates are inferred.

Tinsley, B. A.↗
NASA NTRS2003

Optimal Disturbances in Boundary Layers Subject to Streamwise Pressure Gradient

An analysis of the non-modal growth of perturbations in a boundary layer in the presence of a streamwise pressure gradient is presented. The analysis is based on PSE equations for an incompressible fluid. Examples with Falkner- Skan profiles indicate that a favorable pressure gradient decreases the non-modal growth while an unfavorable pressure gradient leads to an increase of the amplification. It is suggested that the transient growth mechanism be utilized to choose optimal parameters of tripping elements on a low-pressure turbine (LPT) airfoil. As an example, a boundary-layer flow with a streamwise pressure gradient corresponding to the pressure distribution over a LPT airfoil is considered. It is shown that there is an optimal spacing of the tripping elements and that the transient growth effect depends on the starting point. The amplification is found to be small at the LPT s very low Reynolds numbers, but there is a possibility to enhance the transient energy growth by means of wall cooling.

Ashpis, David E.↗
NASA NTRS2011

Gravito-Inertial Force Resolution in Perception of Synchronized Tilt and Translation

Natural movements in the sagittal plane involve pitch tilt relative to gravity combined with translation motion. The Gravito-Inertial Force (GIF) resolution hypothesis states that the resultant force on the body is perceptually resolved into tilt and translation consistently with the laws of physics. The purpose of this study was to test this hypothesis for human perception during combined tilt and translation motion. EXPERIMENTAL METHODS: Twelve subjects provided verbal reports during 0.3 Hz motion in the dark with 4 types of tilt and/or translation motion: 1) pitch tilt about an interaural axis at +/-10deg or +/-20deg, 2) fore-aft translation with acceleration equivalent to +/-10deg or +/-20deg, 3) combined "in phase" tilt and translation motion resulting in acceleration equivalent to +/-20deg, and 4) "out of phase" tilt and translation motion that maintained the resultant gravito-inertial force aligned with the longitudinal body axis. The amplitude of perceived pitch tilt and translation at the head were obtained during separate trials. MODELING METHODS: Three-dimensional mathematical modeling was performed to test the GIF-resolution hypothesis using a dynamical model. The model encoded GIF-resolution using the standard vector equation, and used an internal model of motion parameters, including gravity. Differential equations conveyed time-varying predictions. The six motion profiles were tested, resulting in predicted perceived amplitude of tilt and translation for each. RESULTS: The modeling results exhibited the same pattern as the experimental results. Most importantly, both modeling and experimental results showed greater perceived tilt during the "in phase" profile than the "out of phase" profile, and greater perceived tilt during combined "in phase" motion than during pure tilt of the same amplitude. However, the model did not predict as much perceived translation as reported by subjects during pure tilt. CONCLUSION: Human perception is consistent with the GIF-resolution hypothesis even when the gravito-inertial force vector remains aligned with the body during periodic motion. Perception is also consistent with GIF-resolution in the opposite condition, when the gravito-inertial force vector angle is enhanced by synchronized tilt and translation.

Wood, Scott J.↗
NASA NTRS2022

Quantifying Feedback from Narrow Line Region Outflows in Nearby Active Galaxies. IV. The Effects of Different Density Estimates on the Ionized Gas Masses and Outflow Rates

Active galactic nuclei (AGN) can launch outflows of ionized gas that may influence galaxy evolution, and quantifying their full impact requires spatially resolved measurements of the gas masses, velocities, and radial extents. We previously reported these quantities for the ionized narrow-line region outflows in six low-redshift AGN, where the gas velocities and extents were determined from Hubble Space Telescope long-slit spectroscopy. However, calculating the gas masses required multicomponent photoionization models to account for radial variations in the gas densities, which span ∼6 orders of magnitude. To simplify this method for larger samples with less spectral coverage, we compare these gas masses with those calculated from techniques in the literature. First, we use a recombination equation with three different estimates for the radial density profiles. These include constant densities, those derived from [S ii], and power-law profiles based on constant values of the ionization parameter (U). Second, we use single-component photoionization models with power-law density profiles based on constant U, and allow U to vary with radius based on the [O iii]/Hβ ratios. We find that assuming a constant density of nH = 10(^2) cm(^−3) overestimates the gas masses for all six outflows, particularly at small radii where the outflow rates peak. The use of [S ii] marginally matches the total gas masses, but also overestimates at small radii. Overall, single-component photoionization models where U varies with radius are able to best match the gas mass and outflow rate profiles when there are insufficient emission lines to construct detailed models.

Mitchell Revalski↗
NASA NTRS2005

Time-Averaged Velocity, Temperature and Density Surveys of Supersonic Free Jets

A spectrally resolved molecular Rayleigh scattering technique was used to simultaneously measure axial component of velocity U, static temperature T, and density p in unheated free jets at Mach numbers M = 0.6,0.95, 1.4 and 1.8. The latter two conditions were achieved using contoured convergent-divergent nozzles. A narrow line-width continuous wave laser was passed through the jet plumes and molecular scattered light from a small region on the beam was collected and analyzed using a Fabry-Perot interferometer. The optical spectrum analysis air density at the probe volume was determined by monitoring the intensity variation of the scattered light using photo-multiplier tubes. The Fabry-Perot interferometer was operated in the imaging mode, whereby the fringe formed at the image plane was captured by a cooled CCD camera. Special attention was given to remove dust particles from the plume and to provide adequate vibration isolation to the optical components. The velocity profiles from various operating conditions were compared with that measured by a Pitot tube. An excellent comparison within 5m's demonstrated the maturity of the technique. Temperature was measured least accurately, within 10K, while density was measured within 1% uncertainty. The survey data consisted of centerline variations and radial profiles of time-averaged U, T and p. The static temperature and density values were used to determine static pressure variations inside the jet. The data provided a comparative study of jet growth rates with increasing Mach number. The current work is part of a data-base development project for Computational Fluid Dynamics and Aeroacoustics codes that endeavor to predict noise characteristics of high speed jets. A limited amount of far field noise spectra from the same jets are also presented. Finally, a direct experimental validation was obtained for the Crocco-Busemann equation which is commonly used to predict temperature and density profiles from known velocity profiles. Data presented in this paper are available in ASCII format upon request.

Panda, Jayanta↗
NASA NTRS1989

Surface structure of neutron stars with high magnetic fields

The equation of state of cold dense matter in strong magnetic fields is calculated in the Thomas-Fermi and Thomas-Fermi-Dirac approximations. For use in the latter calculation, a new expression is derived for the exchange energy of the uniform electron gas in a strong magnetic field. Detailed calculations of the density profile in the surface region of a neutron star are described for a variety of equations of state, and these show that the surface density profile is strongly affected by the magnetic field, irrespective of whether or not matter in a magnetic field has a condensed state bound with respect to isolated atoms. It is also shown that, as a consequence of the field dependence of the screening potential, magnetic fields can significantly increase nuclear reaction rates.

Fushiki, I.↗
NASA NTRS2021

Constraining the Neutron Star Mass–Radius Relation and Dense Matter Equation of State with NICER. III. Model Description and Verification of Parameter Estimation Codes

We describe the X-ray pulse profile models we use and how we use them to analyze Neutron Star Interior Composition Explorer(NICER)observations of rotation-powered millisecond pulsars to obtain information about the mass–radius relation of neutron stars and the equation of state of the dense matter in their cores. Here we detail our modeling of the observed profile of PSR J0030+0451 that we analyzed in Miller et al. and Riley et al. and describe a cross-verification of computations of the pulse profiles of a star with R/M 3, in case stars this compact need to be considered in future analyses. We also present our early cross-verification efforts of the parameter estimation procedures used by Miller et al. and Riley et al. by analyzing two distinct synthetic data sets. Both codes yielded credible regions in the mass–radius plane that are statistically consistent with one another, and both gave posterior distributions for model parameter values consistent with the values that were used to generate the data. We also summarize the additional tests of the parameter estimation procedure of Miller et al. that used synthetic pulse profiles and the NICER pulse profile of PSR J0030+0451. We then illustrate how the precision of mass and radius estimates depends on the pulsar’s spin rate and the size of its hot spot by analyzing four different synthetic pulse profiles. Finally, we assess possible sources of systematic error in the estimates made using this technique, some of which may warrant further investigation.

Slavko Bogdanov↗
NASA NTRS2000

Vapor Transport Within the Thermal Diffusion Cloud Chamber

A review of the equations used to determine the 1-D vapor transport in the thermal diffusion cloud chamber (TDCC) is presented. These equations closely follow those of the classical Stefan tube problem in which there is transport of a volatile species through a noncondensible, carrier gas. In both cases, the very plausible assumption is made that the background gas is stagnant. Unfortunately, this assumption results in a convective flux which is inconsistent with the momentum and continuity equations for both systems. The approximation permits derivation of an analytical solution for the concentration profile in the Stefan tube, but there is no computational advantage in the case of the TDCC. Furthermore, the degree of supersaturation is a sensitive function of the concentration profile in the TD CC and the stagnant background gas approximation can make a dramatic difference in the calculated supersaturation. In this work, the equations typically used with a TDCC are compared with very general transport equations describing the 1-D diffusion of the volatile species. Whereas no pressure dependence is predicted with the typical equations, a strong pressure dependence is present with the more general equations given in this work. The predicted behavior is consistent with observations in diffusion cloud experiments. It appears that the new equations may account for much of the pressure dependence noted in TDCC experiments, but a comparison between the new equations and previously obtained experimental data are needed for verification.

Ferguson, Frank T.↗
NASA NTRS1969

Determination of the temperature profile in an atmosphere from its outgoing radiation

A highly convergent relaxation method for the inversion of the full radiative transfer equation was developed. The results of the iterative solution indicate that convergence can be achieved over a wide range of initial guesses, enabling the temperature profile of a relatively unknown atmosphere to be unambiguously determined. The method is illustrated by examples for the outgoing radiance in the earth's atmosphere for the region of the 4.3 microns CO2 band, but can be similarly applied in other frequency ranges.

Chahine, M. T.↗
NASA NTRS2014

Numerical Simulations For the F-16XL Aircraft Configuration

Numerical simulations of flow around the F-16XL are presented as a contribution to the Cranked Arrow Wing Aerodynamic Project International II (CAWAPI-II). The NASA Tetrahedral Unstructured Software System (TetrUSS) is used to perform numerical simulations. This CFD suite, developed and maintained by NASA Langley Research Center, includes an unstructured grid generation program called VGRID, a postprocessor named POSTGRID, and the flow solver USM3D. The CRISP CFD package is utilized to provide error estimates and grid adaption for verification of USM3D results. A subsonic high angle-of-attack case flight condition (FC) 25 is computed and analyzed. Three turbulence models are used in the calculations: the one-equation Spalart-Allmaras (SA), the two-equation shear stress transport (SST) and the kε turbulence models. Computational results, and surface static pressure profiles are presented and compared with flight data. Solution verification is performed using formal grid refinement studies, the solution of Error Transport Equations, and adaptive mesh refinement. The current study shows that the USM3D solver coupled with CRISP CFD can be used in an engineering environment in predicting vortex-flow physics on a complex configuration at flight Reynolds numbers.

Elmiligui, Alaa A.↗