SEARCH · Search NASA

Results for “Eddy viscosity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Compressibility effects in turbulence modeling

Numerical turbulence modeling is discussed with attention given to fluid property variations caused by compressibility in an adiabatic flow. The models are considered in terms of integral quantities expressed by ordinary differential equations and by those formulated as partial differential equations. Compressibility corrections for both integral and partial differential methods are reviewed. Eddy-viscosity models are explored for their capability to characterize the mass-weighted Reynolds stress, which can be accounted for with primitive and/or mass-weighted variables. Compressible flow simulations are currently constrained to low Re and zero mean dilation. The effects of compressibility are defined in wave number space by resolving the Fourier transforms of the velocity vectors into components which are perpendicular and parallel to the wave number vector. Statistical correlations then permit obtaining a value for each contribution.

Rubesin, M. W.↗

NASA NTRS1983

Calculation of a simulated 3-D high speed inlet using the Navier-Stokes equations

A hybrid numerical algorithm, developed to solve the full three-dimensional Navier-Stokes equations, is applied to the computation of the flowfield in a simulated three-dimensional high speed aircraft inlet at a Mach number of 2.5 and Reynolds number of 1.4 x 10 to the 7th based on inlet length. The numerical algorithm incorporates a coordinate transformation in order to handle general flow geometries, and utilizes the algebraic turbulent eddy viscosity model of Baldwin and Lomax. The hybrid algorithm has been vectorized on the CDC CYBER 203 computer using the SL/1 vector programming language developed at NASA Langley. The computed results are compared with experimental measurements of the ramp and cowl static pressures, and boundary layer pitot profiles. The results are also compared with a previous two-dimensional Navier-Stokes computation of the same configuration. The agreement with the experimental data is generally good; however, additional improvements in turbulence modeling are needed.

Knight, D. D.↗

NASA NTRS1983

Turbulence modeling methods for the compressible Navier-Stokes equations

Turbulence modeling methods for the compressible Navier-Stokes equations, including several zero- and two-equation eddy-viscosity models, are described and applied. Advantages and disadvantages of the models are discussed with respect to mathematical simplicity, conformity with physical theory, and numerical compatibility with methods. A new two-equation model is introduced which shows advantages over other two-equation models with regard to numerical compatibility and the ability to predict low-Reynolds-number transitional phenomena. Calculations of various transonic airfoil flows are compared with experimental results. A new implicit upwind-differencing method is used which enhances numerical stability and accuracy, and leads to rapidly convergent steady-state solutions.

Coakley, T. J.↗

NASA NTRS1983

Effect of low Reynolds number turbulence amplification on the Galileo probe flowfield

The amplification of turbulence at low Reynolds numbers is analyzed as it affects the Jupiter-entry flowfield, surface-heating rate, and mass-loss rate of the 335-kg Galileo probe now being designed. The constant k(2) in the Clauser-Klebanoff outer law of the two-layer algebraic eddy-viscosity model of Cebeci (1970), as used in earlier models of the Galileo flowfield (Moss and Simmonds, 1982), is modified to increase at low Reynolds numbers, as found experimentally by Varner and Adams (1980). Calculations were performed for peak heating conditions (at 49.13 sec of entry), using a turbulent Prandtl number of 0.9 and turbulent Lewis numbers (LeT) of 0.8, 1.0, and 1.2. The low-Reynolds-number effect is found to produce mass-loss-ratio increases of from 4 to 50 percent, while an LeT of 1.2 produced an increase of from 4 to 10 percent as compared to an LeT of 1.0. While these findings are based on experimental data obtained under conditions somewhat different from those probably present on Jupiter, their importance for a conservative probe design is stressed.

Gupta, R. N.↗

NASA NTRS1983

Three-dimensional flow over a conical afterbody containing a centered propulsive jet - A numerical simulation

The supersonic flow field over a body of revolution incident to the free stream is simulated numerically on a large, array processor (the CDC Cyber 205). The configuration is composed of a cone-cylinder forebody followed by a conical afterbody from which emanates a centered, supersonic propulsive jet. The free-stream Mach number is 2, the jet-exit Mach number is 2.5, and the jet-to-free-stream static pressure ratio is 3. Both the external flow and the exhaust are ideal air at a common total temperature. The thin-layer approximation to the time-dependent, compressible, Reynolds-averaged Navier-Stokes equations are solved using an implicit finite-difference algorithm. The data base, of 5 million words, is structured in a 'pencil' format so that efficient use of the array processor can be realized. The computer code is completely vectorized to take advantage of the data structure. Turbulence closure is achieved using an empirical algebraic eddy-viscosity model. The configuration and flow conditions correspond to published experimental tests and the computed solutions are consistent with the experimental data.

Deiwert, G. S.↗

NASA NTRS1982

Comparison of three-dimensional turbulent boundary-layer calculations with experiment

A numerical simulation is carried out of the incompressible three-dimensional turbulent boundary-layer experiments of van den Berg and Elsenaar (1972), Dechow (1977), and Muller (1982). The simulation is effected by integrating the boundary-layer equations together with an algebraic eddy-viscosity turbulence model. With this computational method, the downstream portion of the flow treated by van den Berg and Elsenaar, where the crossflow is large, cannot be predicted. It is believed that this flow is significantly influenced by elliptic flow-field effects. Even though Dechow's experiment also indicated departures from the boundary-layer concept, the calculations made here agree reasonably well with the mean-flow development up to separation. The normal pressure gradients in Muller's experiment are found to be negligible in regions with large skewing, making it possible to test turbulence models using the boundary-layer equations. The simulation of this flow compares favorably with the experimental data throughout the flow field.

Muller, U. R.↗

NASA NTRS1983

A fully vectorized numerical solution of the incompressible Navier-Stokes equations

A vectorizable algorithm is presented for the implicit finite difference solution of the incompressible Navier-Stokes equations in general curvilinear coordinates. The unsteady Reynolds averaged Navier-Stokes equations solved are in two dimension and non-conservative primitive variable form. A two-layer algebraic eddy viscosity turbulence model is used to incorporate the effects of turbulence. Two momentum equations and a Poisson pressure equation, which is obtained by taking the divergence of the momentum equations and satisfying the continuity equation, are solved simultaneously at each time step. An elliptic grid generation approach is used to generate a boundary conforming coordinate system about an airfoil. The governing equations are expressed in terms of the curvilinear coordinates and are solved on a uniform rectangular computational domain. A checkerboard SOR, which can effectively utilize the computer architectural concept of vector processing, is used for iterative solution of the governing equations.

Patel, N.↗

NASA NTRS1984

Analysis of inviscid and viscous flows in cascades with an explicit multiple-grid algorithm

A rapid technique is used for calculating inviscid and viscous flows in turbomachinery cascades. The Euler and thin-layer Navier-Stokes equations are solved using the original explicit MacCormack algorithm. The Baldwin-Lomax eddy viscosity model is used for turbulent flows. Convergence to a steady state is accelerated by use of a variable time-step and a multiple-grid scheme. Computer time is reduced through vectorization. Details of the numerical method are presented along with computed results for two low-speed wind tunnel turning vanes, a space shuttle fuel pump turbine rotor, and a supersonic inflow compressor rotor. The method can predict subtle viscous flow phenomena in cascades and is fast enough to be used as a design tool.

Chima, R. V.↗

NASA NTRS1984

The application of satellite data to study the effects of latent heat release on cyclones

Generalized energetics were studied for nonlinear inviscid symmetric instability (SI). It was found that the linear theory fails to predict the stability in certain cases where the basic state is transitional between stability and instability. The initial growth of the SI perturbations can be fairly well approximated by linear theory, but the long time nonlinear evaluations will be bonded energetically if the SI region is finite. However, a further extension of the energetics to conditional symmetric instability (CSI) shows that the nonlinear evolution of circulation will energetically depend much more on the precipitation in a complicated way. By treating the latent heat as a source which is implicitly related to the motion field, the existence, uniqueness and stability of steady viscous (CSI) circulations are studied. Viscous CSI circulations are proved to be unique and asymptotically stable when the heat sources are weak and less sensitive to the motion perturbations. By considering the fact that moist updrafts are narrow and using eddy viscosity of 0(1,000 m squared/s) the stability criterion suggests that some frontal rainbands were probably dominated by the CSI mechanism even in their mature quasi-steady stage.

Clark, J. H. E.↗

NASA NTRS1983

Numerical simulation of turbulent trailing edge flows

Numerical simulations of the time-dependent, Reynolds-averaged, Navier-Stokes equations, employing a two-equation turbulence model, are presented and compared with measurements from a series of trailing edge experiments at transonic Mach numbers. The test flows include an asymmetric flow with no separation, an asymmetric flow with a small region of separation and a symmetric flow with a large shock-wave induced separated zone. Comparisons are made for mean surface quantities as well as for mean and fluctuating flow-field quantities. For the trailing-edge flows with little or no separation, the solutions correctly predict all the major features of the flow field. Treatment of the viscous-inviscid interaction was found to be important for predicting these test cases. Two-equation eddy-viscosity turbulence models were found to be adequate for these flows. However, for the shock-wave induced separation case, these turbulence models were inadequate to predict this flow field. Modifications of the turbulence model to correct these deficiencies are discussed.

Horstman, C. C.↗

NASA NTRS1984

Analysis of inviscid and viscous flows in cascades with an explicit multiple-grid algorithm

Chima, R. V.↗

NASA NTRS1984

Theoretical analysis of aircraft afterbody flow

The strongly interactive flow field about aircraft afterbodies is investigated using computational techniques by which the thin-shear-layer formulation of the compressible, Reynolds-averaged Navier-Stokes equations is solved. A time-dependent implicit numerical algorithm is used to obtain solutions for a variety of afterbody and nozzle geometries, within the class of bodies of revolution, for both subsonic and supersonic external flow, and for sonic and supersonic underexpanded jets. Only centered nozzles with either a sharp lip or a blunt base are considered. In all cases, computed results are compared with experimental data taken at flight Reynolds numbers for like-flow conditions. Turbulence closure is realized using algebraic eddy-viscosity concepts. A new and unique adaptive-grid technique is used to resolve flow regimes with large gradients and to improve the accuracy and efficiency of the computational scheme. Special singular point boundary conditions are used for similar purposes, and are especially effective for highly under-expanded jets. For all cases considered, except one with a very large base-to-nozzle-exit-diameter ratio, the agreement with experimental measurements is excellent. For geometries with large base regions, enhancements in the turbulence transport model are necessary to support improvements in the flow-field simulation.

Deiwert, G. S.↗

NASA NTRS1984

An experimental study of a supercritical trailing-edge flow

An experimental study has been conducted of a transonic, turbulent, high-Reynolds-number blunt trailing-edge flow. The model shape and the surface pressure distribution are characteristics of a modern supercritical airfoil under shock-free conditions. Reynolds number and pressure gradient scaling of the boundary layer are relevant to airfoil applications. The data set is exceptionally accurate and consistent, with the momentum balance accounting for the flux of momentum to within 1 percent, except in the immediate vicinity of the blunt trailing edge. The experimental flow exhibits strong viscous-inviscid interaction and higher-order boundary-layer effects including strong adverse streamwise pressure gradient, significant normal pressure gradients associated with surface and streamline curvature, and significant wake curvature. Navier-Stokes calculations with a two-equation K-epsilon turbulence model predict the correct pressure distribution which demonstrates the utility of these engineering tools. The experiment approaches separation at the strailing edge. However, in comparison to the experiment, the calculations predict too high skin friction and insufficient displacement thickness growth. An analysis of the turbulent and mean flow fields reveals the turbulence model defects are likely in modeling the dissipation source and sink terms, and in the eddy viscosity relation.

Brown, J. L.↗

NASA NTRS1984

Analytical estimates of turbulent MHD transport coefficients

Turbulent transfer rates from small-scale MHD excitations to large-scale Fourier modes are calculated algebraically, using the method of Biskamp and Welter. Three cases are considered: two-dimensional Navier-Stokes flows, two-dimensional incompressible MHD, and the weakly three-dimensional Strauss equations. In all cases, an initially large spectral gap between the small-scale and large-scale excitations is assumed, and attention focusses on the initial values of the back-transfer rates. The sign of the transfer is determined by the sign of an analytically calculable eddy viscosity and/or anomalous resistivity. We are able to confirm the results of Biskamp and Welter for the case of two-dimensional MHD, but find some differences for the case of the Strauss equations. It is argued that the Strauss equations may not exhibit an inverse cascade phenomenon for the spatially periodic case unless their initial spectra are such that the behavior is essentially that of two-dimensional MHD.

Montgomery, D.↗

NASA NTRS1986

Analysis of Scramjet Inlets

NASCRIN analyzes two-dimensional flow fields in supersonic combustion ramjet (scramjet) inlets. Solves two-dimensional Euler or Navier-Strokes equations in conservative form by unsplit, explicit, two-step finitedifference method. More recent explicit/implicit, two-step scheme also incorporated for viscous flow analysis. Algebraic, two-layer eddy-viscosity model used for turbulent flow calculations.

Kumar, A.↗

NASA NTRS1982

Aerothermal modeling

The objectives, approach, and status of a program to develop the computational fluid dynamics tools needed to improve combustor design and analysis are outlined. The calculation procedure selected consists of a finite difference solution of the time averaged, steady state, primitive variable, elliptic form of the Reynolds equations. Standard TEACH type numerics are used to solve the resulting equations. These include hybrid differencing, SIMPLE algorithm for the pressure field, line by line iterative solution using the ADI method and the tridiagonal matrix algorithm (TDMA). Convergence is facilitated by using under relaxation. The physical processes are modeled by a two equation eddy viscosity model for turbulence; combustion is represented by a simple, irreversible, one step chemical reaction whose rate is influenced only by the time scale of the turbulence. The model evaluation procedure is also described.

Sturgess, G. J.↗

NASA NTRS1985

Calculation of three-dimensional, viscous flow through turbomachinery blade passages by parabolic marching

The three-dimensional compressible Navier-Stokes equations are formulated in a rotating coordinate system, so as to include centrifugal and Coriolis forces. The equations are parabolized by using a previously calculated inviscid static pressure field. The thin layer Navier-Stokes approximation, which neglects streamwise diffusion, is used. A body-fitted coordinate system is used. The streamwise momentum equation is uncoupled from the cross-stream momentum equation by using contravariant momentum components, and then using the contravariant velocity components as primary unknowns. To reduce problems with small separated regions, the Reyhner and Flugge-Lotz approximation is used. The energy equation is included to allow for calculation of heat transfer. The flow may be laminar, or a simple eddy-viscosity turbulence may be used. A number of curved ducts and an axial stator were analyzed, including cases for which experimental data are available.

Katsanis, T.↗

NASA NTRS1985

Predictions and measurements of isothermal flowfields in axisymmetric combustor geometries

Numerical predictions, flow visualization experiments and time-mean velocity measurements were obtained for six basic nonreacting flowfields (with inlet swirl vane angles of 0 (swirler removed), 45 and 70 degrees and sidewall expansion angles of 90 and 45 degrees) in an idealized axisymmetric combustor geometry. A flowfield prediction computer program was developed which solves appropriate finite difference equations including a conventional two equation k-epsilon eddy viscosity turbulence model. The wall functions employed were derived from previous swirling flow measurements, and the stairstep approximation was employed to represent the sloping wall at the inlet to the test chamber. Recirculation region boundaries have been sketched from the entire flow visualization photograph collection. Tufts, smoke, and neutrally buoyant helium filled soap bubbles were employed as flow tracers. A five hole pitot probe was utilized to measure the axial, radial, and swirl time mean velocity components.

Rhodes, D. L.↗