Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electronic Structure Calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

From electronic structure to model application of key reactions for gasoline/alcohol combustion: Hydrogen-atom abstractions by $CH_3\dot{O}$ radical

H-atom abstraction by methoxy radical ($CH_3\dot{O}$) plays an important role in capturing the kinetics of reactions between gasoline components and alcohols. This study focuses on determining the reaction rates and thermodynamic properties of methoxy radical reactions with five gasoline fuel components: n-heptane, iso-octane, 1-hexene, cyclopentane and toluene. Electronic structure calculations were per-formed for all the stationary points with M06-2X/6 -311 ++ g(d,p) method. G3 composite method with atomization method is used for determining Δ f H 0 of all the closed shell and radical species, using which the necessary thermodynamic data of all the species was determined. Coupled cluster theory QCISD(T)/cc-pVXZ (where X = D and T) and Møller-Plesset perturbation theory MP2/cc-pVXZ (where X = D, T and Q) were used to calculate single point energies. Subsequently, rate constants for all hydrogen atom ab-straction channels have been performed using conventional transition state theory with unsymmetric tunneling corrections. A systematic comparison of rates for abstraction from different sites within the same species and same site from different species is done in order to get insights into this reaction class. Here, the computed thermodynamic properties and rate constants were incorporated into a recent gasoline mechanism to investigate the impact of the calculations performed in this work. A shift in predicted NTC (negative temperature coefficient) behavior and significant reduction in model reactivity is observed upon incorporating the rates calculated herein.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Absolute photoionization cross sections of brominated organics and determination of an effective C—Br bond cross section

For this work, absolute photoionization cross sections for five brominated species were measured using multiplexed synchrotron photoionization mass spectrometry at the Advanced Light Source (Lawrence Berkeley National Laboratory). These data enable reliable detection of bromine-containing compounds and estimation of C—Br bond photoionization cross sections. Complementary electronic-structure calculations provided adiabatic ionization energies in good agreement with experiment, while thermochemical appearance energies were measured directly. Bond dissociation energies for key fragmentation pathways of the neutral parent molecules were also analyzed. At 11 eV, cross sections were 53.8 ± 7.50 Mb (sp 2 C—Br) and 48.8 ± 7.70 Mb (sp 3 C—Br).

Brominated compounds↗
DOE OSTI2025

Siegert-pseudostate formulation with B-splines

Siegert states (SSs) serve as a useful basis for studying quantum scattering from finite-range potentials. Since they form a discrete instead of continuous set of eigen-solutions, SSs are convenient for performing electronic structure calculations in atoms, molecules, and plasmas. Numerical instabilities may arise, however, in the computation of SSs if the potential vanishes for some extended region, a situation commonly occurring in plasma calculations. Here, in this paper, we identify the cause of these instabilities as the use of non-localized radial basis functions. We thus advocate the use of localized radial basis functions, in particular B-splines, for more robust computations of SSs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Synthesis, structure, linear and nonlinear optical properties of noncentrosymmetric quaternary diamond-like semiconductors, Cu 2 ZnGeSe 4 (CZGSe) and the novel Cu 4 ZnGe 2 Se 7

In this work, two quaternary diamond-like semiconductors (DLSs) in the Cu-Zn-Ge-Se system, the known Cu 2 ZnGeSe 4 (also referred to as CZGSe) and the new Cu 4 ZnGe 2 Se 7 , are compared in terms of their crystal structures, electronic structures and physicochemical properties. Both compounds were prepared by high-temperature, solid-state synthesis at 800 degrees C. Single crystal X-ray diffraction was used to determine the structure of Cu 4 ZnGe 2 Se 7 . The structures of both Cu 2 ZnGeSe 4 and Cu 4 ZnGe 2 Se 7 can be considered as derivatives of cubic diamond. Cu 4 ZnGe 2 Se 7 , with a reduced symmetry due to the cation ordering pattern, adopts the Cu 4 NiSi 2 S 7 structure type, with space group C2. The corner-sharing tetrahedra in Cu 4 ZnGe 2 Se 7 are slightly distorted because the charge for some of the S 2 - anions is not compensated by the first-nearest-neighbor cations. Rietveld refinements using synchrotron X-ray powder diffraction data were used to assess the phase purity of the samples and confirm the bulk structural behavior. Diffuse reflectance UV/Vis/NIR spectroscopy shows that Cu 2 ZnGeSe 4 and Cu 4 ZnGe 2 Se 7 have direct optical bandgaps of 1.38 and 0.91 eV, respectively. Electronic structure calculations implementing density functional theory confirm the direct bandgap for Cu 4 ZnGe 2 Se 7 , with a calculated value of 0.62 eV. Both compounds are air stable, thermally stable up to relatively high temperatures, undergo phase transitions and have wide windows of optical clarity. The Kurtz-Perry powder technique was used to determine the second harmonic generation (SHG) responses using a commercial AgGaSe 2 standard. While Cu 4 ZnGe 2 Se 7 displays a weak SHG response, Cu 2 ZnGeSe 4 exhibits a response that is greater than several benchmark materials, with a large SHG coefficient, χ (2) , of 43 ± 6 pm/V at λ = 2900 nm.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structure and disorder resulting in ultralow thermal conductivity in the defect chalcopyrite AgInSnSe 4

Quaternary chalcogenides are attractive for a variety of technological fields of interest due to the diverse physical properties these materials possess. Herein, the structural and thermal properties of the disordered chalcopyrite AgInSnSe 4 are reported revealing a distinct relation between its structure and physical properties. Modeling of the experimental temperature-dependent thermal properties revealed an ultralow thermal conductivity (0.47 Wm -1 K -1 at room temperature) due to lattice anharmonicity, a low speed of sound and a low Debye temperature. Moreover, first principles electronic structure calculations revealed that the Ag-Se tetrahedra within the crystal structure possess relatively weak bonds due to occupied antibonding states from p-d orbital hybridization, which suppress the thermal conductivity. Here, in order to further quantify our findings, we extended our analyses to include comparisons with other ternary and quaternary adamantine materials, all of which possess a fourfold tetrahedral coordination of atoms, in revealing the origin of the thermal properties in AgInSnSe 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effects of water on the kinetics of acetone hydrogenation over Pt and Ru catalysts

We employed an approach combining reaction kinetics measurements at steady state conditions, electronic structure calculations employing density functional theory, and microkinetic modeling for acetone hydrogenation to provide insights into the effects of water on metal catalyst surfaces for the hydrogenation of oxygenates over a wide range of reaction conditions. Elucidation of the repulsive interactions due to adsorbed water molecules at various reaction conditions provides a basis to formulate rate expressions for heterogeneous catalytic processes of biomass oxygenates. Reaction kinetics experiments were carried out at partial pressures of H 2 , acetone, water and helium in the range of 0.51-0.79, 0.02-0.13, 0.08-0.23, 0-0.28 atm, respectively. We show that the addition of water enhances the hydrogenation rate at 353 K and 1 atm on oxophilic metal catalysts such as Ru/C, whereas the same promotional effect of water is not observed for Pt-based catalysts. Microkinetic model predictions for the hydrogenation of acetone on Ru in the absence and presence of water, using enthalpies and entropies obtained from DFT calculations, were in agreement with the experimentally observed reaction orders and activation barriers. The model shows that a water-assisted hydroxypropyl path is expected to be the favored path on Ru with a rate-determining step of H-OH-mediated hydrogenation of C 3 H 6 OH (i.e., the hydroxypropyl intermediate formed by H 2 O-mediated initial hydrogenation of acetone) to produce isopropyl alcohol (IPA). Furthermore, hydrogen, acetone, hydroxypropyl intermediate and hydroxyl species were predicted to be abundant on the Ru surface with a high coverage of nearly 85%. Lastly, the combined studies of computational and experimental catalysis on hydrogenation reactions help to elucidate the mechanistic role of water on metal catalyzed reactions for producing chemical building blocks from biomass-derived oxygenates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Investigation of $\gamma$-irradiated polyvinylidene fluoride and its acute toxicity

Polyvinylidene fluoride (PVDF) is an industrial polymer with many applications. The EPR spectrum of polyvinylidene fluoride (PVDF) irradiated by γ-rays at low temperature (-196°C) provides evidence for the presence of radicals formed by loss of a fluorine atom from PVDF, and polyenyl radicals. Polyenyl radicals dominate in the polymer irradiated at room temperature. Peroxide radicals formed as a result of oxidation of primary free radicals by atmospheric oxygen are observed in the EPR spectrum of a polymer irradiated in air, or when air is introduced to a polymer irradiated in a vacuum. Carbonization and oxidation of γ-irradiated PVDF were observed in the XPS spectrum. A model for polymer degradation based on correlated G3(MP2) molecular orbital theory electronic structure calculations is described in this report. The presence of HF in the products and a low yield of products with the composition CxFyHz indicate the absence of noticeable thermal destruction of the main polymer chain upon heating to 220°C of both the initial and γ-irradiated PVDF. Although any HF released during the PVDF dehydrofluorination would be toxic, a study of the acute toxicity of γ-irradiated PVDF showed that the polymer does not exhibit toxicity after a single intragastric route of administration to mice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ab initio study of tungsten-based alloys under fusion power-plant conditions

Tungsten (W) is considered a leading candidate for structural and functional materials in future fusion energy devices. The most attractive properties of tungsten for magnetic and inertial fusion energy reactors are its high melting point, high thermal conductivity, low sputtering yield, and low long-term disposal radioactive footprint. However, tungsten also presents a very low fracture toughness, primarily associated with intergranular failure and bulk plasticity, limiting its applications. In recent years, several families of tungsten-based alloys have been explored to overcome the aforementioned limitations of pure tungsten. These include tungsten-based high-entropy alloys (W-HEAs) and tungsten-based Self-passivating Metal Alloys with Reduced Thermo-oxidation or “SMART alloys” (W-SAs). Given their proximity to the plasma, it is crucial to understand how the exposure of these candidate plasma-facing materials (PFMs) to the neutron fluxes expected in fusion reactors impacts their material behavior over time. In this work, we present a computational approach that combines inventory codes and first-principles DFT electronic structure calculations to understand the behavior of transmuting tungsten-based PFMs. In particular, we calculate the changes in the chemical composition, production uncertainties, the elastic and ductility properties, and the density of states for five tungsten-based PFMs when exposed to EU-DEMO fusion first wall conditions for ten years.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Analysis of correlations between intrinsic ductility and electronic density of states in refractory alloys

High entropy alloys (HEAs) correspond to a new and emerging class of materials that allows us to explore a large composition space to tune mechanical strength and thermal stability. Therefore, to design better alloys, it is important to scan the high-dimensional space of chemistry, composition and temperature. Here, to facilitate this search, we present a method to screen intrinsically ductile body centered cubic (BCC) refractory alloys from electronic structure calculations by using the density of states (DOS) at the Fermi level, g(μ F ). This correlation between intrinsic ductility and g(μ F ) is tested by analyzing group V (V, Nb, Ta) and VI (Mo, W) refractory metals, binary alloys, such as W-Nb, W-V, Mo-Nb and Mo-V, and refractory alloys for which experimental stress-strain measurements are available. In addition, we perform a high-throughput exploration of the entire composition space of a recently proposed alloy system, CrMoNbV, and identify compositions that exhibit high intrinsic ductility.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Molecular Mass Growth Processes to Polycyclic Aromatic Hydrocarbons through Radical–Radical Reactions Exploiting Photoionization Reflectron Time-of-Flight Mass Spectrometry

Polycyclic aromatic hydrocarbons (PAHs) represent critical building blocks in molecular mass growth processes to carbonaceous nanoparticles, referred to as interstellar and circumstellar grains along with soot particles in astrophysical environments and combustion systems, respectively. Recent advancements on elucidating elementary steps to PAHs have utilized reactions of aromatic radicals, resonantly stabilized free radicals, and aliphatic radicals with closed shell hydrocarbons. However, the role of radical–radical reactions (RRRs) leading to PAHs has remained largely unexplored on the molecular level due to preceding experimental challenges in producing sufficiently high number densities of radical reactants for isomer-selective detection of products from bimolecular and termolecular reactions. This Account offers the latest developments in our knowledge on the mechanisms and pathways to PAHs via RRRs probed in a chemical microreactor at temperatures as high as 1600 K. Product preservation in a molecular beam coupled with synchrotron vacuum ultraviolet photoionization reflectron time-of-flight mass spectrometry and photoelectron photoion coincidence spectroscopy enabled isomer-selective detection of PAHs of up to three rings by their photoionization efficiency curves, which were fit with a linear combination of reference curves for identification. Experiments were combined with computational fluid dynamics modeling of the physicochemical processes in the microreactor, as well as high-level electronic structure calculations to reveal the reaction pathways of each system. Six distinct reaction mechanisms were discovered in this work: propargyl addition─benzannulation (PABA), methyl addition─ring expansion (MARE), cyclopentadienyl addition─naphthylization (CPAN), fulvenallenyl addition─cyclization─aromatization (FACA), benzyl addition─aromatization (BAA), and phenyl addition─pentacyclization (PAP). By systematically varying the number of carbon atoms in the radical reactants, molecular mass growth processes involving reactions between radicals with odd numbers of carbon atoms access aromatics carrying one, two, or three six-membered rings, whereas reactions between even- and odd-carbon-numbered radicals produce aromatics combining five- and six-membered rings. Our investigations reveal unconventional cycloadditions on excited state triplet surfaces, additions of radicals to low spin density carbon-centered radicals, spiroaromatic and fulvene-type intermediates, and highly strained bicyclic reaction intermediates, challenging current perceptions of PAH molecular mass growth processes. All of the listed mechanisms, except for FACA, feature endoergic reactions or barriers which lie above the separated reactants and therefore might be central to circumstellar environments of carbon-rich stars and planetary nebulae as their descendants, but they play no role in the gas phase of cold molecular clouds where temperatures as low as 10 K dominate. Altogether, this work provides detailed reaction mechanisms of PAH growth processes, advancing our knowledge of the chemistry of carbonaceous matter in the universe.

Addition reactions↗
DOE OSTI2025

Crystal Growth of Quaternary Rare Earth Selenosilicates by Using the Flux-Assisted Boron Chalcogen Mixture Method: Investigation of Their Magnetic and Optical Properties

A series of rare earth magnesium selenosilicates, RE3Mg 0.5 SiSe 7 (RE = Ce, Pr, Nd, Sm, Gd, Tb, Dy) were obtained as single crystal using the flux assisted boron chalcogen mixture (BCM) method. The structures of the crystals were determined by single-crystal X-ray diffraction. The RE3Mg 0.5 SiSe 7 series crystallizes in the hexagonal crystal system in the space group P6 3 . Polycrystalline powders were synthesized to perform physical property measurements. Magnetic measurements over the 2–300 K temperature range reveal that Ce 3 Mg 0.5 SiSe 7 and Gd 3 Mg 0.5 SiSe 7 exhibit paramagnetic behavior with negative Weiss constants (θ W = −14.50, θ W = −6.13 K, respectively). The optical properties of RE 3 Mg 0.5 SiSe 7 (RE = Ce, Pr, Nd, Sm, Gd) were measured by ultraviolet–visible (UV–vis) diffuse reflectance. Density functional theory (DFT) electronic structure calculations were performed. Furthermore, a second harmonic generation measurement was performed on a polycrystalline powder of Ce 3 Mg 0.5 SiSe 7 and was found to be SHG active with an efficiency of 0.11 times the standard potassium dihydrogen phosphate (KDP).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Catastrophic Charge Density Wave in BaFe 2 Al 9

Charge density waves (CDWs) are modulations of the electron density and the atomic lattice that develop in some crystalline materials at low temperatures. We report an unusual example of a CDW in BaFe 2 Al 9 below 100 K. In contrast to the canonical CDW phase transition, temperature-dependent physical properties of single crystals reveal a first-order phase transition. This is accompanied by a discontinuous change in the size of the crystal lattice. In fact, this large strain has catastrophic consequences for the crystals causing them to physically shatter. Single-crystal X-ray diffraction reveals superlattice peaks in the low-temperature phase signaling the development of a CDW lattice modulation. No similar low-temperature transitions are observed in BaFe 2 Al 9 . Electronic structure calculations provide one hint to the different behavior of these two compounds; the d-orbital states in the Fe compound are not completely filled. Iron compounds are renowned for their magnetism, and partly filled d-states play a key role. Finally, it is therefore surprising that BaFe 2 Al 9 develops a structural modulation at low temperature instead of magnetic order.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Predicting the onset of metal-insulator transitions in transition metal oxides-A first step in designing neuromorphic devices.

Several transition metal oxides, including La1-xSrxCoO3, are promising materials to realize resistive switching devices for neuromorphic applications, as they can undergo a metal-to-insulator transition (MIT) upon small perturbations to their electronic structure. Here, we focus on the MIT induced by varying the oxygen vacancy concentration, and we propose a model to predict the required electrical bias, based on three fundamental quantities: the vacancy formation energy, the permanent polarization in the material, and its dielectric constant. We obtain these quantities using first-principles electronic structure calculations, and we discuss strategies to minimize the electrical bias which may be adopted experimentally to design and optimize neuromorphic devices.

Zhang, Shenli↗
DOE OSTI2021

Synthesis and Transport Properties of the Family of Zintl Phases Ca 3 RESb 3 (RE = La–Nd, Sm, Gd–Tm, Lu): Exploring the Roles of Crystallographic Disorder and Core 4f Electrons for Enhancing Thermoelectric Performance

Zintl phases with complex crystal structures have been studied as promising candidate-materials for thermoelectric (TE) applications. Here, we report the syntheses of the family of rare-earth metal Zintl phases with the general formula Ca 4–x RE x Sb 3 (x ≈ 1; RE = La–Nd, Sm, Gd–Tm, Lu). The structural elucidation is based on refinements of single-crystal X-ray diffraction data for 12 unique chemical compositions. The cubic structure is confirmed as belonging to the anti-Th 3 P 4 structure type (space group I4¯3d, no. 220, Z = 4), where the Ca and RE atoms share the same atomic site with ca. 75% and 25% occupancies, respectively. Such crystallographic disordering of divalent Ca and trivalent RE atoms in the structure provides a pathway to intricate bonding. The latter, together with the presence of heavy elements such as Sb and the lanthanides, are expected to enhance the scattering probability of phonons, thereby leading to as low thermal conductivity κ as that of the ordered RE 4 Sb 3 . The drive of the hypothetical parent compound Ca 4 Sb 3 to be stabilized by alloying with rare-earth metals can be understood following the Zintl-Klemm concept, as the resultant formula may be rationalized as (Ca 2+ ) 3 RE 3+ (Sb 3– ) 3 , indicating the realization of closed-shell electronic configurations for all elements. This notion is confirmed by electronic structure calculations, which reveal narrow bandgaps E g = 0.77 and 0.53 eV for Ca 3 LaSb 3 and Ca 3 LuSb 3 , respectively. Additionally, the incorporation of RE atoms into the structure drives the phase into a state of a degenerate semiconductor with dominant hole charge carriers.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ligand Control of Structural Diversity in Luminescent Hybrid Copper(I) Iodides

Copper(I) iodide hybrids are of interest for next-generation lighting technologies because of their efficient luminescence in the absence of rare-earth elements. Here, we report 10 structurally diverse hybrid copper(I) iodides that emit in the green–red region with quantum yields reaching 67%. The compounds display a diversity of structures including ones with one-dimensional (1D) Cu–1 chains, Cu 2 I 2 rhomboid dimers, and structures with two different arrangements of Cu 4 I 4 tetramers. The compounds with Cu 2 I 2 rhomboid dimers or Cu 4 I 4 cubane tetramers have higher photoluminescence quantum yields than those with Cu–I 1D chains and octahedral Cu 4 I 4 tetramers, owing to the optimal degree of condensation of the inorganic motifs, which suppresses nonradiative processes. Electronic structure calculations on these compounds point out the critical influence of the inorganic motif and organic ligand on the nature of the band gaps and thus the excitation characteristics. Temperature-dependent photoluminescence spectra are presented to better understand the nature of luminescence in compounds with different inorganic motifs. Here. the emerging understanding of composition–structure–property correlations in this family provides inspiration for the rational design of hybrid phosphors for general lighting applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

On the Effects of Aliovalent Substitutions in Thermoelectric Zintl Pnictides. Varied Polyanionic Dimensionality and Complex Structural Transformations–The Case of Sr 3 ZnP 3 vs Sr 3 Al x Zn 1– x P 3

The structures and the transport properties of a novel family of Zintl phosphides and arsenides with the formula AE 3 ZnPn 3 and the solid solutions AE 3 Al x Zn 1–x Pn 3 , AE 3 ZnAs y P 1–y (AE = Sr, Eu; Pn = P, As) are reported. Crystals of nine new phases have been obtained via Pb-flux reactions and used for structural work by means of single-crystal X-ray diffraction methods. The derived orthorhombic structure is without a direct analog, and features unusual structural units, where the Zn atoms are in both distorted tetrahedral and trigonal-planar coordination of pnictogens. Electronic structure calculations reveal moderately wide bandgaps for Sr 3 ZnP 3 and Sr 3 ZnAs 3 , on the order of 0.70 and 0.63 eV, respectively. Electrical transport measurements above room temperature indicate relatively high resistivity values above 500 K (ρ ≈ 4.8 Ω cm and above), but some of the samples exhibit very high Seebeck coefficients, as large as 300 μV/K at 560 K for Sr 3 ZnAs 3 . Aliovalent substitutions in AE 3 ZnPn 3 , achieved by the partial replacement of Zn 2+ with Al 3+ cations promote occupational and positional disorder, which causes structural transformation towards the disordered variant of the Sr 5 Al 2 Sb 6 structure type. Such substitutions also change the dimensionality of the polyanionic sub-lattice in the resulting quaternary AE 3 Al x Zn 1–x Pn 3 phases. Furthermore, preliminary transport property data on the latter reveal nine times lower electrical resistivity (ρ 500 ≈ 0.5 Ω cm) together with a significantly enhanced Seebeck coefficient, αmax ≈ 430 μV/K at 560 K.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Solution-Phase Synthesis and Photoluminescence of Quaternary Chalcohalide Semiconductors

Mixed-metal chalcohalide semiconductors have emerged as promising candidates for photovoltaic applications. However, preparation of these multinary compounds using solution-phase techniques remains particularly challenging compared to traditional solid-state methods. To fully harness their potential, it is desirable to develop synthetic methods that enable control over both the phase purity and dimensionality of chalcohalides. In this work, we report the solution-phase synthesis of Pb 2 SbS 2 I 3 and Pb 2 BiS 2 I 3 quaternary chalcohalides using readily available precursors. Fine tuning of reaction parameters allows for the isolation of rod-like morphologies with tunable diameters and aspect ratios. The quaternary chalcohalides display photoluminescence as an ensemble as well as at the single particle level, as demonstrated using fluorescence microscopy. We further evaluate the relative stability and band gap of Pb 2 SbS 2 I 3 polymorphs and their coloring patterns using electronic structure calculations. The synthetic methods developed here will motivate the study of ever more complex chalcohalides and other multinary semiconductors for new technological applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Soft-Chemical Synthesis, Structure Evolution, and Insulator-to-Metal Transition in Pyrochlore-like λ-RhO 2

λ-RhO 2 , a prototype 4d transition metal oxide, has been prepared by the oxidative delithiation of spinel LiRh 2 O 4 using ceric ammonium nitrate. Average-structure studies of this RhO 2 polytype, including synchrotron powder X-ray diffraction and electron diffraction, indicate the room-temperature structure to be tetragonal, in space group I4 1 /amd, with a first-order structural transition to cubic $Fd\bar{3}m$ at T = 345 K on warming. Synchrotron X-ray pair distribution function analysis and 7 Li solid-state nuclear magnetic resonance measurements suggest that the room-temperature structure displays local Rh-Rh bonding. The formation of these local dimers appears to be associated with a metal-to-insulator transition with a nonmagnetic ground state, as also supported by density functional theory-based electronic structure calculations. In conclusion, this contribution demonstrates the power of soft chemistry to kinetically stabilize a simple binary oxide compound.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗