Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy Intensive Processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Development of Next Generation Heating System for Scale Free Steel Reheating

The work carried out under this project includes development and design of components, controls, and economic modeling tools that would enable the steel industry to reduce energy intensity through reduction of scale formation during the steel reheating process. Application of scale free reheating offers savings in energy used for production of steel that is lost as scale, and increase in product yield for the global steel industry. The technology can be applied to a new furnace application as well as retrofit design for conversion of existing steel reheating furnaces. The development work has resulted in the knowledge base that will enable the steel industry and steel forging industry us to reheat steel with 75% to 95% reduction in scale formation and associated energy savings during the reheating process. Scale reduction also results in additional energy savings associated with higher yield from reheat furnaces. Energy used for steel production ranges from 9 MM Btu/ton to 16.6 MM Btu/ton or the industry average of approximately 13 MM Btu/ton. Hence, reduction in scale at reheating stage would represent a substantial energy reduction for the steel industry. Potential energy savings for the US steel industry could be in excess of 25 Trillion Btu/year when the technology is applied to all reheating processes. The development work has resulted in new design of reheating process and the required burners and control systems that would allow use of this technology for steel reheating in steel as well as steel forging industries.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Enhanced ion acceleration in transition from opaque to transparent plasmas

Using particle-in-cell simulations, we investigate ion acceleration in the interaction of high intensity lasers with plasmas which transition from opaque to transparent during the interaction process. We show that the highest ion energies are achieved when the laser traverses the target around the peak intensity and re-heats the electron population responsible for the plasma expansion, enhancing the corresponding sheath electric field. This process can lead to an increase of up to 2x in ion energy when compared with the standard Target Normal Sheath Acceleration in opaque targets under the same laser conditions. A theoretical model is developed to predict the optimal target areal density as a function of laser intensity and pulse duration. A systematic parametric scan for a wide range of target densities and thicknesses is performed in 1D, 2D and 3D and shown consistent with the theory and with recent experimental results. Thus, these results open the way for a better optimization of the ion energy in future laser–solid experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Future HEP Accelerators: The US Perspective

Accelerator technology has advanced tremendously since the introduction of accelerators in the 1930s, and particle accelerators have become indispensable instruments in high energy physics (HEP) research to probe Nature at smaller and smaller distances. At present, accelerator facilities can be classified into Energy Frontier colliders that enable direct discoveries and studies of high mass scale particles and Intensity Frontier accelerators for exploration of extremely rare processes, usually at relatively low energies. The near term strategies of the global energy frontier particle physics community are centered on fully exploiting the physics potential of the Large Hadron Collider (LHC) at CERN through its high-luminosity upgrade (HL-LHC), while the intensity frontier HEP research is focused on studies of neutrinos at the MW-scale beam power accelerator facilities, such as Fermilab Main Injector with the planned PIP-II SRF linac project. A number of next generation accelerator facilities have been proposed and are currently under consideration for the medium- and long-term future programs of accelerator-based HEP research. In this paper, we briefly review the post-LHC energy frontier options, both for lepton and hadron colliders in various regions of the world, as well as possible future intensity frontier accelerator facilities.

43 PARTICLE ACCELERATORS↗

Current state and future projections of drying processes in the US food and pulp and paper sectors: Energy, economic, and environmental assessment

The pulp and paper (P/P) and food sectors are the third- and fifth-largest industrial energy consumers in the United States, with total on-site energy consumption of 2,039 TBtu and 1,144 TBtu, respectively. Thermal drying processes for moisture removal, which are energy-intensive, play a critical role in both industries. This study is the first to evaluate state- and national-level US drying energy demand for these sectors from 2020 to 2050. To complete this evaluation, we developed a thermodynamic modeling framework integrated with economic and environmental models to compute product-specific drying energy intensity and estimate the sector-specific costs and emissions profiles associated with drying operations. The model-predicted energy intensity was validated against the literature. Using current and projected annual production volumes in these sectors, we estimated total drying energy use. Results indicate that drying accounts for 22 % of total energy consumption in the P/P sector and 10 % in the food sector. The estimated annual energy cost (2020) to operate thermal dryers is $\$$919 M in the P/P sector and $\$$417 M in the food sector. Additionally, drying contributes to 25 % of total CO 2 e emissions in the P/P sector (including biogenic) and 15 % of emissions in the food sector. Regional performance shows that the Southern US is the leading energy consumer for P/P drying, whereas the Midwest leads in food drying. This study presents both potential solutions to enhance drying efficiency and barriers to implementation. Energy efficiency improvements, low-carbon fuels, and electrification are discussed as key pathways for reducing costs and optimizing industrial drying processes.

3E analysis↗

Pyrazine-Fused Porous Graphitic Framework-Based Mixed Matrix Membranes for Enhanced Gas Separations

Membrane-based separations can mitigate the capital- and energy-intensive challenges associated with traditional thermally driven processes. To further push the boundary of gas separations, mixed matrix membranes (MMMs) have been extensively exploited; however, identifying an optimal nanofiller to boost the separation performance of MMMs beyond Robeson permeability-selectivity upper bounds remains an ongoing challenge. In this study, a new class of MMMs based on pyrazine-fused crystalline porous graphitic frameworks (PGFs) is reported. At a loading of 6 wt % PGFs, the MMMs surpass the current H 2 /CH 4 Robeson upper bound, ideally suited for applications such as H 2 regeneration. In addition, the fabricated MMMs exhibit appealing CO 2 separation performance, closely approaching the current Robeson upper bounds for CO 2 separation. Compared with the pristine polymeric membranes, the PGF-based MMMs display a record-high enhancement of gas permeability over 120% while maintaining intrinsic gas selectivities. Highlighting the crucial role of the crystallinity of nanofillers, this study demonstrates a facile and effective approach in formulating high-performance MMMs, complementing state-of-the-art membrane formation processes. The design principles open the door to energy-efficient separations of gas mixtures with enhanced productivity compatible with the current membrane manufacturing.

36 MATERIALS SCIENCE↗

Validation of the Land-Surface Energy Budget and Planetary Boundary Layer for Several Intensive field Experiments

Land-surface processes in a data assimilation system influence the lower troposphere and must be properly represented. With the recent incorporation of the Mosaic Land-surface Model (LSM) into the GEOS Data Assimilation System (DAS), the detailed land-surface processes require strict validation. While global data sources can identify large-scale systematic biases at the monthly timescale, the diurnal cycle is difficult to validate. Moreover, global data sets rarely include variables such as evaporation, sensible heat and soil water. Intensive field experiments, on the other hand, can provide high temporal resolution energy budget and vertical profile data for sufficiently long periods, without global coverage. Here, we evaluate the GEOS DAS against several intensive field experiments. The field experiments are First ISLSCP Field Experiment (FIFE, Kansas, summer 1987), Cabauw (as used in PILPS, Netherlands, summer 1987), Atmospheric Radiation Measurement (ARM, Southern Great Plains, winter and summer 1998) and the Surface Heat Budget of the Arctic Ocean (SHEBA, Arctic ice sheet, winter and summer 1998). The sites provide complete surface energy budget data for periods of at least one year, and some periods of vertical profiles. This comparison provides a detailed validation of the Mosaic LSM within the GEOS DAS for a variety of climatologic and geographic conditions.

Bosilovich, Michael G.↗

Friction Stir Processing for Efficient Manufacturing

Friction at contacting surfaces in relative motion is a major source of parasitic energy loss in machine systems and manufacturing processes. Consequently, friction reduction usually translates to efficiency gain and reduction in energy consumption. Furthermore, friction at surfaces eventually leads to wear and failure of the components thereby compromising reliability and durability. In order to reduce friction and wear in tribological components, material surfaces are often hardened by a variety of methods, including conventional heat treatment, laser surface hardening, and thin-film coatings. While these surface treatments are effective when used in conjunction with lubrication to prevent failure, they are all energy intensive and could potentially add significant cost. A new concept for surface hardening of metallic materials and components is Friction Stir Processing (FSP). Compared to the current surface hardening technologies, FSP is more energy efficient has no emission or waste by products and may result in better tribological performance. FSP involves plunging a rotating tool to a predetermined depth (case layer thickness) and translating the FSP tool along the area to be processed. This action of the tool produces heating and severe plastic deformation of the processed area. For steel the temperature is high enough to cause phase transformation, ultimately forming hard martensitic phase. Indeed, FSP has been used for surface modification of several metals and alloys so as to homogenize the microstructure and refine the grain size, both of which led to improved fatigue and corrosion resistance. Based on the effect of FSP on near-surface layer material, it was expected to have beneficial effects on friction and wear performance of metallic materials. However, little or no knowledge existed on the impact of FSP concerning friction and wear performance the subject of the this project and final report. Specifically for steel, which is the most dominant tribological material, FSP can replace the current conventional surface hardening techniques used for friction and wear performance. Friction Stir Link Inc. (FSL) is teamed with Argonne National Laboratory (ANL) to develop and optimize FSP for friction and wear performance enhancement. The ultimate goal is to offer FSP and an effective alternative to some of the current energy intensive and high-cost surface hardening processes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Catalytic Processes to Accelerate Decarbonization in a Net-Zero Carbon World

Reducing carbon dioxide emissions is one of the critical challenges to mitigate global climate change, which is having detrimental impacts on society and the environment. Fossil fuel combustion in transportation, power generation, and industrial processes is the dominant contributor to carbon emissions. Over the past decades, sustainable solutions and strategies have been investigated and developed to enable decarbonization. Catalysis plays an essential role to address this global challenge by increasing energy efficiency, reducing carbon emissions, capturing carbon dioxide, and utilizing clean energy sources to displace fossil fuels. In this Review, the role of catalysis in reducing energy demand was discussed, enhancing process efficiency, displacing carbon-intensive feedstocks and products, and therefore, reducing carbon emissions. Here, recent advances in catalyst development were summarized, focusing on applications to enhance industrial processes efficiency and enable utilization of clean energy sources. Emerging approaches in catalysis were reviewed, including the manufacture of iron and steel, direct air capture of CO 2 , production of ethylene, ammonia, and sustainable aviation fuels, plastic recycling, and the synthesis of biobased plastics. The Review was concluded with suggested research directions to achieve a carbon net-zero world.

36 MATERIALS SCIENCE↗

An integrated 6 MV linear accelerator model from electron gun to dose in a water tank

Purpose: The details of a full simulation of an inline side-coupled 6 MV linear accelerator (linac) from the electron gun to the target are presented. Commissioning of the above simulation was performed by using the derived electron phase space at the target as an input into Monte Carlo studies of dose distributions within a water tank and matching the simulation results to measurement data. This work is motivated by linac-MR studies, where a validated full linac simulation is first required in order to perform future studies on linac performance in the presence of an external magnetic field. Methods: An electron gun was initially designed and optimized with a 2D finite difference program using Child's law. The electron gun simulation served as an input to a 6 MV linac waveguide simulation, which consisted of a 3D finite element radio-frequency field solution within the waveguide and electron trajectories determined from particle dynamics modeling. The electron gun design was constrained to match the cathode potential and electron gun current of a Varian 600C, while the linac waveguide was optimized to match the measured target current. Commissioning of the full simulation was performed by matching the simulated Monte Carlo dose distributions in a water tank to measured distributions. Results: The full linac simulation matched all the electrical measurements taken from a Varian 600C and the commissioning process lead to excellent agreements in the dose profile measurements. Greater than 99% of all points met a 1%/1mm acceptance criterion for all field sizes analyzed, with the exception of the largest 40x40 cm{sup 2} field for which 98% of all points met the 1%/1mm acceptance criterion and the depth dose curves matched measurement to within 1% deeper than 1.5 cm depth. The optimized energy and spatial intensity distributions, as given by the commissioning process, were determined to be non-Gaussian in form for the inline side-coupled 6 MV linac simulated. Conclusions: An integrated simulation of an inline side-coupled 6 MV linac has been completed and benchmarked matching all electrical and dosimetric measurements to high accuracy. The results showed non-Gaussian spatial intensity and energy distributions for the linac modeled.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Process Development for Nanostructured Photovoltaics

Photovoltaic manufacturing is an emerging industry that promises a carbon-free, nearly limitless source of energy for our nation. However, the high-temperature manufacturing processes used for conventional silicon-based photovoltaics are extremely energy-intensive and expensive. This high cost imposes a critical barrier to the widespread implementation of photovoltaic technology. Argonne National Laboratory and its partners recently invented new methods for manufacturing nanostructured photovoltaic devices that allow dramatic savings in materials, process energy, and cost. These methods are based on atomic layer deposition, a thin film synthesis technique that has been commercialized for the mass production of semiconductor microelectronics. The goal of this project was to develop these low-cost fabrication methods for the high efficiency production of nanostructured photovoltaics, and to demonstrate these methods in solar cell manufacturing. We achieved this goal in two ways: 1) we demonstrated the benefits of these coatings in the laboratory by scaling-up the fabrication of low-cost dye sensitized solar cells; 2) we used our coating technology to reduce the manufacturing cost of solar cells under development by our industrial partners.

14 SOLAR ENERGY↗

A Molecular Compound for Highly Selective Purification of Ethylene

Purification of C 2 H 4 from an C 2 H 4 /C 2 H 6 mixture is one of the most challenging separation processes, which is achieved mainly through energy-intensive, cryogenic distillation in industry. Sustainable, non-distillation methods are highly desired as alternatives. We discovered that the fluorinated bis(pyrazolyl)borate ligand supported copper(I) complex {[(CF 3 ) 2 Bp]Cu} 3 has features very desirable in an olefin–paraffin separation material. It binds ethylene exclusively over ethane generating [(CF 3 ) 2 Bp]Cu(C 2 H 4 ). This molecular compound exhibits extremely high and record ideal adsorbed solution theory (IAST) C 2 H 4 /C 2 H 6 gas separation selectivity, affording high purity (>99.5 %) ethylene that can be readily desorbed from separation columns. In-situ PXRD provides a “live” picture of the reversible conversion between [(CF 3 ) 2 Bp]Cu(C 2 H 4 ) and the ethylene-free sorbent in the solid-state, driven by the presence or removal of C 2 H 4 . As a result, molecular structures of trinuclear {[(CF 3 ) 2 Bp]Cu} 3 and mononuclear [(CF 3 ) 2 Bp]Cu(C 2 H 4 ) are also presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phosphorene‐Supported Transition‐Metal Dimer for Effective N 2 Electroreduction

Abstract The electrochemical reduction of N 2 to NH 3 at ambient conditions is a promising alternative to the energy‐intensive, high‐temperature, high‐pressure Haber‐Bosch process. But it is extremely challenging to find an electrocatalyst that can effectively activate N 2 and reduce it to NH 3 . From first principles density functional theory, we found that the Ti dimer supported on single‐layer phosphorene can be used as a promising electrocatalyst for N 2 capture and conversion to NH 3 . The overpotential (relative to the standard hydrogen electrode) was found to be as low as 0.20, much lower than those predicted on the Ti surface (1 to 1.5 V) or their nitrides (0.5 to 1 V). In addition, we found that hydride is involved in the N 2 reduction on the Ti dimer catalyst via formation of Ti 2 ‐H species, and the hydride would favorably transfer onto the adsorbed N 2 * to form *NNH intermediate and further reduced to NH 3 . Moreover, we also examined other first‐row transition metal dimers, and found that Sc and Fe dimer to be potential catalysts which could catalyze N 2 reduction at a low overpotential of about 0.21 and 0.45 V, respectively. Our predictions hence suggest Ti, Sc and Fe dimer clusters supported on phosphorene as promising electrocatalysts for N 2 reduction to NH 3 .

Tang, Qing↗

Decarbonizing nitrogen fertilizer production via the electrochemical nitrogen oxidation reaction

Nitric acid is an important commodity chemical with extensive applications in both agricultural and industrial sectors. However, current production methods involve a combination of the Haber–Bosch and Ostwald processes, which are both energy and carbon emission intensive. The electrochemical nitrogen oxidation reaction (NOR) to produce nitric acid or nitrates shows great potential as an environmentally friendly method for producing fertilizers under mild conditions. The key to progress in this field lies in understanding the fundamental mechanistic insights and establishing robust experimental methods, which is essential for the efficient design and synthesis of electrocatalysts for NOR. Additionally, poor gas mass transport in conventional electrochemical reactors at present lead to lower NOR activity, thereby limiting the progress in this field. In this work, we present a synergistic computational and experimental approach to map out the potential chemical and electrochemical steps and determine the energetics on PtO 2 catalyst to gain mechanistic insights into NOR. Here, this study marks the first attempt to perform NOR in a vapor-fed reactor designed using advanced (additive) manufacturing. The vapor-fed reactor significantly improved the N 2 mass transport to the catalyst, allowing us to report the highest rate for nitrate production to date at 3.3 μmol cm -2 h -1 at 2.01 V vs RHE.

30 DIRECT ENERGY CONVERSION↗

Revolutionizing Methane Transformation with the Dual Production of Aromatics and Electricity in a Protonic Ceramic Electrocatalytic Membrane Reactor

Reducing the energy and carbon intensity of the conventional chemical processing industry can be achieved by electrochemically transforming natural gases into higher-value chemicals with higher efficiency and near-zero emissions. In this work, the direct conversion of methane to aromatics and electricity has been achieved in a protonic ceramic electrocatalytic membrane reactor through the integration of a proton-conducting membrane assembly and a trimetallic Pt–Cu/Mo/ZSM-5 catalyst for the nonoxidative methane dehydro-aromatization reaction. In this integrated system, a remarkable 15.6% single-pass methane conversion with an 11.4% benzene yield has been demonstrated, while a peak power density of 276 mW cm –2 is obtained at 700 °C. The enhanced 15.7% increase in conversion and 16.0% improvement in the yield are observed when compared with the thermochemical process, which is attributed to the shift of reaction equilibrium by the removal of hydrogen through the protonic membrane. Concurrently, the faster H2 removal at a higher electrical current gave rise to a higher methane conversion and benzene yield. Furthermore, the catalyst can be efficiently regenerated by eliminating carbon deposition. A stable cell potential is maintained for 45 h under a constant current load of 0.13 A cm –2 . Lastly, the dual production of aromatics and electricity in the electrocatalytic membrane reactor has been demonstrated to be an attractive approach for decarbonizing chemical processing.

aromatic compounds↗

Catalysts for nitrogen reduction to ammonia

We present the production of synthetic ammonia remains dependent on the energy- and capital-intensive Haber-Bosch process. Extensive research in molecular catalysis has demonstrated ammonia production from di-nitrogen, albeit at low production rates. Mechanistic understanding of di-nitrogen reduction to ammonia continues to be delineated through study of molecular catalyst structure, as well as through understanding the naturally-occurring nitrogenase enzyme. The transition to Haber-Bosch alternatives through robust, heterogeneous catalyst surfaces remains an unsolved research challenge. Catalysts for electrochemical reduction of di-nitrogen to ammonia are a specific focus of research, due to the potential to compete with Haber-Bosch and eliminate associated carbon dioxide emissions. However, limited progress has been made, as most electrocatalyst surfaces lack specificity towards nitrogen fixation. Lastly in this review, we discuss the progress of the field in developing a mechanistic understanding of nitrogenase-promoted and molecular catalyst-promoted ammonia synthesis and provide a review of the state-of-the-art and scientific needs for heterogeneous electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast Iterative Multi-site Hosting Capacity Analysis for Distribution Systems With Search Space Pruning

Interconnection studies for distributed energy resources (DERs) is a time-intensive process, primarily due to the necessity of solving large number of power flow scenarios. Hosting capacity analysis (HCA) is a time-consuming aspect of interconnection studies that is divided into single-site HCA (SHCA) and multi-site HCA (MHCA). From a computational and understandable standpoint, the industry seeks iteration-based solutions for SHCA, although it doesn't maximize the total DER hosting capacity (DERHC) of the grid, as MHCA does. While non-iterative solutions are available for MHCA, they involve a trade-off between the modeling accuracy of the distribution system, solution quality, and ease of understanding. In this work, we present a fast iterative solution for MHCA, reducing computational complexity by eliminating the need to solve power flows for a large amount of search space, thus making iterative solutions feasible. This iterative approach guarantees both a global optimal solution with sufficient time and a fast, close-to-optimal solution through efficient search space pruning. It also easily integrates with existing utility HCA tools. The results are demonstrated on select locations in the IEEE-123 bus system for community-scale interconnection studies. We highlight the benefits of skipping the need to solve millions of power flows, all while maximizing the grid's total DERHC.

Guddanti, Kishan Prudhvi↗

Supply Chain Sustainability Analysis of Whole Algae Hydrothermal Liquefaction and Upgrading

The Department of Energy’s Bioenergy Technology Office (BETO) collaborates with a wide range of institutions towards the development and deployment of biofuels and bioproducts. To facilitate this effort, BETO and its partner national laboratories develop detailed techno-economic assessments (TEA) of biofuel production technologies as part of the development of design cases and state of technology (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. BETO also develops supply chain sustainability analyses (SCSA) for key biofuel production technologies that are the subject of design case or SOT analyses (Dunn et al. 2013). The SCSA utilizes a life-cycle analysis to estimate the energy use and greenhouse gas (GHG) emissions associated with biofuel production and assists in comparing several biofuel pathways. This report documents an SCSA of whole algae hydrothermal liquefaction (AHTL) as the conversion technology to produce renewable diesel (RD). Jones et al. (2014) developed the design case process model that provides the material and energy intensity of the feedstock conversion step in the SCSA. In this study, conversion of algal biomass to RD is achieved by whole AHTL, as described in the design report by Pacific Northwest National Laboratory (Jones et al., 2014). Wet algal biomass, as undisrupted cells, is converted into a liquid fuel with pressurized water in a condensed phase. The SCSA for this pathway is described.

09 BIOMASS FUELS↗

Fuel From Algae: Scaling and Commercialization of Algae Harvesting Technologies

Broad Funding Opportunity Announcement Project: Led by CEO Ross Youngs, AVS has patented a cost-effective dewatering technology that separates micro-solids (algae) from water. Separating micro-solids from water traditionally requires a centrifuge, which uses significant energy to spin the water mass and force materials of different densities to separate from one another. In a comparative analysis, dewatering 1 ton of algae in a centrifuge costs around $3,400. AVS’s Solid-Liquid Separation (SLS) system is less energy-intensive and less expensive, costing $1.92 to process 1 ton of algae. The SLS technology uses capillary dewatering with filter media to gently facilitate water separation, leaving behind dewatered algae which can then be used as a source for biofuels and bio-products. The biomimicry of the SLS technology emulates the way plants absorb and spread water to their capillaries.

Advanced Fuels↗