Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Measurements of the fragmentation of (40)Ar, (28)Si and (12)C in CH2C and H targets between 300 and 1500 MeV/nuc at the Bevalac

Studies of the fragmentation of various nuclei in CH2 and C targets were continued with the objective of obtaining cross sections in hydrogen for use in the cosmic ray propagation problem. New measurements include Fe-56. Measurements were made at 6 energies between 300 and 1700 MeV/nuc. C-12 measurements were made at six energies. Si-28 measurements were made at three energies and measurements were made at two energies. New data on C.-12 Si-28 and AR-44 nuclei are given. The data are compare it with the earlier semi-empirical predictions.

Webber, W. R.↗

Composite interlaminar fracture - Effect of matrix fracture energy

A major result of the use of the double cantilever beam test to provide a measure of the interlaminar fracture energy in composites subjected to simple Mode I-type loading is the observation that increasing the toughness of the matrix resin by as much as a factor of 20 produced a major (approximately four-fold) increase in interlaminar fracture energy. The data presently analyzed show that, with brittle polymers, resin toughness is fully transferred to the composite, while in the case of tougher polymers the resin toughness is only partially transferred due to the fibers' restriction of the crack tip deformation zone in the polymer, together with their changing of local stress field details. Factors which tend to increase interlaminar toughness are fiber nesting and bridging, as well as fiber breakage and pull-out during crack growth.

Hunston, D. L.↗

Large-scale stationary and turbulent flow over topography

The contributions made to the formation of stationary features of flow over topography by linear and nonlinear dynamics were examined with an integrated quasi-geostrophic model with idealized topographic forcing. The simulation was run out to several months and generated time-averaged values which were compared with those obtained with linear theory. Linear predictions were converted to turbulent features through the addition of stationary, nonlinear thermodynamic and transient vorticity fluxes. The turbulence features matched atmospheric data on energy spectra, the direction and magnitude of energy transfers, and the spatial magnitudes involved. Transient flow transferred the majority of energy absorbed by the upscale flow and, by absorbing energy, reduced the energy of stationary flow while retaining resonance signatures. Instability was a pervasive feature of the topographically forced flow except at high wavenumbers. The results confirm that transient eddies are interactive with both asymmetric and zonal flow and cannot be adequately described by linear theory.

Vallis, G. K.↗

The nature of chemisorbed oxygen on Ni(100) and Cu(100)

Model calculations indicate two low-lying states for the interaction of O with Ni and Cu(100). The oxide state is approximately 1 eV more stable and its R(perpendicular) for Ni(100) is consistent with the experimental value for Ni(100), indicating only one type of stable chemisorption bond. This agrees with XPS (X-ray photoemission spectroscopy) and EXAFS (extended X-ray absorption fine structure) data for the observed LEED (low energy electron diffraction) structures. Interpretations of EELS (electron energy loss spectroscopy) data in terms of a radical state forthe p(2x2) and the oxide state for the c(2x2) structure must be seriously questioned.

Bauschlicher, C. W., Jr.↗

An absorption event in 4U/MXB 1820 - 30

A search of the HEAO A-2 low-energy detector data base for absorption-like events from X-ray bulge sources and bursters has been performed. Only one event was found, from the burster 4U 1820 - 30, which is located in the globular cluster NGC 6624. Spectral analysis indicates an increase in equivalent column density accompanied by a decrease in the overall intensity. This is similar to previous spectral results for 4U 1915 - 05 and MXB 1659 - 29. The low-mass binary model is discussed in the context of these new observations.

Cominsky, L.↗

Measurements of the north polar cap of Mars and the earth's Northern Hemisphere ice and snow cover

The boundaries of the polar caps of Mars have been measured on more than 3000 photographs since 1905 from the plate collection at the Lowell Observatory. For the earth, the polar caps have been accurately mapped only since the mid 1960s when satellites were first available to synoptically view the polar regions. The polar caps of both planets wax and wane in response to changes in the seasons, and interannual differences in polar cap behavior on Mars as well as earth are intimately linked to global energy balance. Data on the year to year variations in the extent of the north polar caps of Mars and earth have been assembled and compared, although only 6 years of concurrent data were available for comparison.

Foster, J.↗

Angular and energy distribution of low energy cometary ions measured in the outer coma of Comet Halley

During the early phase of the Giotto encounter with comet Halley, at distances from the nucleus greater than 350,000 km, the neutral mass spectrometer was operated in a mode allowing the measurement of low energy ions. Data reveal two important features of the outer coma: the presence of a sharp discontinuity in the plasma flow at 550,000 km from the nucleus which results in a significant decrease of the plasma flow accompanied by an increase in temperature; and the detection of newly born ions identified as O(+) and CO(+), at distances from the comet greater than 800,000 km.

Berthelier, J. J.↗

Detection of a hot plasma component within the core regions of Jupiter's distant magnetotail

Voyager-2 PLS low-energy plasma data and the magnetometer data are combined with the the LECP ion data (E greater than 28 keV) for the distant magnetotail observations (R = 5000-9000 Jupiter radii). A definite enhancement of LECP fluxes within the core regions (where the PLS densities and magnetic-field pressure are lower than in the surrounding regions) is shown, indicating that this hot tenuous plasma is present within the core regions. In general there is a strong anticorrelation between PLS density and LECP fluxes, while a less pronounced anticorrelation between magnetic-field pressure and LECP fluxes is observed. Estimates of LECP pressures suggest that this hot plasma can provide the previously described missing pressure in the core if heavy ions dominate the ion composition. The angular dependence of the LECP data indicates a flow of this hot plasma in the anti-Jupiter direction. This outflowing plasma could be the remnant of the magnetospheric wind observed near Jupiter by LECP. On the basis of this preliminary study, the core regions are found to have similarities to a plasma sheet.

Sittler, Edward C., Jr.↗

High temperature solid oxide regenerative fuel cell for solar photovoltaic energy storage

A hydrogen-oxygen regenerative fuel cell energy storage system based on high temperature solid oxide fuel cell technology is discussed which has application to darkside energy storage for solar photovoltaics. The forward and reverse operating cycles are described, and heat flow, mass, and energy balance data are presented to characterize the system's performance and the variation of performance with changing reactant storage pressure. The present system weighs less than nickel hydrogen battery systems after 0.7 darkside operation, and it maintains a specific weight advantage over radioisotope generators for discharge periods up to 72 hours.

Bents, David J.↗

Preliminary investigation of inertia friction welding B2 aluminides

An attempt is made to achieve inertia friction-welding in FeAl and NiAl samples, taking into account their intermetallics' compositions, extrusion parameters, and microstructural data. The energy required for the weld is stored in a rotating flywheel mass attached to one of the two pieces to be joined; when enough energy is introduced, the flywheel is disconnected and an axial load is applied which forces the spinning piece against the stationary one, converting the energy into heat by means of friction. Due to the inherent brittleness of the aluminides, a step-load program was used in which an initial, low-pressure heat buildup increased the work pieces' ductility.

Whittenberger, J. Daniel↗

Simulation of proton-induced energy deposition in integrated circuits

A time-efficient simulation technique was developed for modeling the energy deposition by incident protons in modern integrated circuits. To avoid the excessive computer time required by many proton-effects simulators, a stochastic method was chosen to model the various physical effects responsible for energy deposition by incident protons. Using probability density functions to describe the nuclear reactions responsible for most proton-induced memory upsets, the simulator determines the probability of a proton hit depositing the energy necessary for circuit destabilization. This factor is combined with various circuit parameters to determine the expected error-rate in a given proton environment. An analysis of transient or dose-rate effects is also performed. A comparison to experimental energy-disposition data proves the simulator to be quite accurate for predicting the expected number of events in certain integrated circuits.

Fernald, Kenneth W.↗

Dynamics Explorer guest investigator

The research has focused on using the SAI auroral images as a high resolution auroral precipitation input to the USU global scale ionospheric model. From the global scale modeling viewpoint, these images offer unique spatial and temporal resolution since all prior studies have used empirical auroral models. These latter models are devoid of storm, substorm, or discrete oval features. The research focused on the problems in converting images to energy flux; using LAPU data to calibrate these energy fluxes; using the USU Time Dependent Ionospheric Model (TDIM) to look at the ionospheric consequences of this structure; and then using DE-2 in-situ observations to compare with the TDIM ionospheric parameters. In carrying out these studies, several additional investigations cropped up which were pursued to help meet the overall goals. The foremost difficulty in carrying out the TDIM modeling in conjunction with the high resolution DE auroral model was that of defining an appropriate ionospheric convection pattern. Under northward conditions this pattern is very complex. In order to study Theta aurora or in general northward IMF conditions, a new model was required. Hence, a study was completed to supply this new model to drive the TDIM as a function of the IMF. With the DE auroral model having adequate resolution to show structure on the 100's of km and all model electric fields being devoid of such structure, an investigation was pursued to find out the effects of structures in the electric field on the F-region.

Sojka, J. J.↗

Rayleigh lidar observations of gravity wave activity in the upper stratosphere at Urbana, Ill.

During 13 nights of Rayleigh lidar measurements at Urbana, Ill. in 1984 to 1986, thirty-six quasi-monochromatic gravity waves were observed in the 35 to 50 km altitude region of the stratosphere. The characteristics of the waves are compared with other lidar and radar measurements of gravity waves and the theoretical models of wave saturation and dissipation phenomena. The measured vertical wavelengths ranged from 2 to 11.5 km and the measured vertical phase velocities ranged from 10 to 85 cm/s. The vertical wavelengths and vertical phase velocities were used to infer observed wave periods which ranged from 100 to 1000 min and horizontal wavelengths which ranged from 70 to 2000 km. Dominant wave activity was found at vertical wavelengths between 2 to 4 km and 7 to 10 km. No significant seasonal variations were evident in the observed parameters. Vertical and horizontal wavelengths showed a clear tendency to increase with wave periods, which is consistent with recent sodium lidar studies of quasi-monochromatic waves near the mesopause. An average amplitude growth length of 20.9 km for the rms wind perturbations was estimated from the data. Kinetic energy density associated with the waves decreased with height, suggesting that waves in this altitude region were subject to dissipation or saturation effects.

Gardner, C. S.↗

AMPTE/CCE observations of substorm-associated standing Alfven waves in the midnight sector

Magnetic-field and medium-energy particle data from the AMPTE/CCE spacecraft are used to study substorm-associated ULF pulsations in the midnight sector at a radial distance of 8 to 9 earth radii. The particle data are used to identify ion injections and to detect the electric field of ULF waves. A case study of the events on May 23, 1985 shows that the waves have the properties of a fundamental-mode standing Alfven wave. It is suggested that these observations are evidence of substorm-associated standing Alfven waves in the nightside magnetosphere.

Takahashi, K.↗

Magnetospheric ULF waves observed during the major magnetospheric compression of November 1, 1984

The magnetospheric ULF waves observed during the magnetospheric compression event of November 1, 1984, were investigated using the magnetic field and medium-energy ion data obtained by the AMPTE Charge Composition Explorer. The electric field of ULF waves was inferred from the particle data, using a method developed on the basis of the gyration acceleration mechanism. Three types of waves were found: (1) a 10-15-min wave with perturbations in the magnetic field intensity and in the flux of ions; (2) a 3-5-min standing Alfven wave with perturbations in the azimuthal magnetic field component and in the radial component of the electric field; and (3) a 2-5-min irregular disturbance near the magnetopause, which involves all components of the magnetic field and the intensity of the ion flux. The origins of these waves are discussed.

Takahashi, K.↗

What is learned from high energy bursts and flares

The Energetic Gamma Ray Experiment Telescope (EGRET) with its large Nal Total Absorption Shower Counter (TASC) has the scientific capability of performing spectroscopy of high energy cosmic gamma ray bursts and solar flares. EGRET, with a spectroscopy energy range from 0.6 to 140 MeV, provides an opportunity to increase the understanding of the high energy mechanisms of gamma ray bursts and solar flares. A likely interpretation of gamma ray burst sources is that they are rotating, magnetized neutron stars. High magnetic fields can influence the emission of high energy gamma rays, so observational spectroscopic data at high energies can provide information on the upper limits of the magnetic fields in the GRB regions of magnetized neutron stars. Likewise, spectroscopy of high energy gamma rays can provide information useful for deriving the flare proton spectrum which in turn can lead to an understanding of high energy solar flare particle acceleration mechanisms.

Schneid, Edward J.↗

The X-ray spectrum of Abell 665

The X-ray spectrum of the Abell 665 cluster of galaxies has been determined by the Ginga satellite. The spectrum can be well fitted by an isothermal model with kT = 8.26(+0.95; -0.81) keV and metal abundance 0.49 +/- 0.16. Joint analysis with lower energy spectral data from the Einstein Observatory is used to constrain the temperature distribution in the cluster. For a particular form of the polytropic temperature model we find the best fit to be the isothermal case, and we set an upper limit on the polytropic index of 1.35 (99-percent confidence). The virial mass of the cluster has been determined from both the X-ray data and the galaxy velocity dispersion. The mass estimates from the optical and X-ray analyses are fully consistent with each other. Abell 665 is found to be 0.82(+0.41; -0.26) times as massive as Coma if the two clusters are assumed to have the same spatial distribution of virial mass.

Hughes, John P.↗

An observation of proton-induced latchup

Proton-induced latchup in a CMOS microprocessor known to have a very low heavy-ion-induced latchup threshold LET was observed. The latchup cross section vs. proton energy for three different bias conditions is displayed. Average measures of latchup current within an 11-ms window following the onset of latchup are provided, as a function of bias and incident proton energy. These data can be interpreted in terms of the present understanding of SEE phenomena.

Nichols, Donald K.↗