Search NASA⌕ Search

SEARCH · Search NASA

Results for “Environment simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Multi-Instance Learning Models for Automated Support of Analysts in Simulated Surveillance Environments

New generations of surveillance drones are being outfitted with numerous high definition cameras. The rapid proliferation of fielded sensors and supporting capacity for processing and displaying data will translate into ever more capable platforms, but with increased capability comes increased complexity and scale that may diminish the usefulness of such platforms to human operators. We investigate methods for alleviating strain on analysts by automatically retrieving content specific to their current task using a machine learning technique known as Multi-Instance Learning (MIL). We use MIL to create a real time model of the analysts' task and subsequently use the model to dynamically retrieve relevant content. This paper presents results from a pilot experiment in which a computer agent is assigned analyst tasks such as identifying caravanning vehicles in a simulated vehicle traffic environment. We compare agent performance between MIL aided trials and unaided trials.

Birisan, Mihnea↗
NASA NTRS1972

Optical properties of thermal control coating contaminated by MMH/N2O4 5-pound thruster in a vacuum environment with solar simulation

Cat-a-lac Black, and S13G thermal control coatings were exposed to the exhaust of a thruster in a simulated space environment. Vacuum was maintained at less than 10 to the minus 5th power torr during thruster firing in the liquid helium cooled facility. The thruster was fired in a 50-millisecond pulse mode and the accumulated firing time was 224 seconds. Solar absorptance (alpha sub s) and thermal emittance (sigma) of the coatings were measured in-situ at intervals of 300 pulses. A calorimetric technique was used to measure alpha sub s and sigma. The tests, technique, and test results are presented. The Cat-a-lac Black coatings showed no change in alpha sub s or sigma. The S13G showed up to 25 percent increase in alpha sub s but no change in sigma.

Sommers, R. D.↗
NASA NTRS1972

Optical properties of thermal control coatings contaminated by MMH/N2O4 5-pound thruster in a vacuum environment with solar simulation.

Cat-a-lac Black and S13G thermal control coatings were exposed to the exhaust of a thrustor in a simulated space environment. Vacuum was maintained at less than 10 microtorr during thrustor firing in the liquid helium cooled facility. The thrustor was fired in a 50-millisecond pulse mode, and the accumulated firing time was 224 seconds. Solar absorptance and thermal emittance of the coatings were measured in-situ at intervals of 300 pulses, using a calorimetric technique. The Cat-a-lac Black coatings showed no change in solar absorptance or thermal emittance. The S13G showed up to 25% increase in solar absorptance but no change in thermal emittance.

Sommers, R. D.↗
NASA NTRS1991

1991 NASA Planetary Rover Program

The principal accomplishments of the 1991 Nasa Planetary Rover Program are described. The work to date has focused on development of unmanned science rover technology within the context of high mobility wheeled vehicles at the JPL and an innovative legged locomotion concept at Carnegie Mellon University. Attention is given to mission operations research including simulation environment, mission scenario simulation experiments, and the rover system executive software that will reside onboard a rover in future planetary surface missions.

Lavery, David↗
NASA NTRS2003

Solar Array in Simulated LEO Plasma Environment

Six different types of solar arrays have been tested in large vacuum chambers. The low earth orbit plasma environment was simulated in plasma vacuum chambers, where the parameters could be controlled precisely. Diagnostic equipment included spherical Langmuir probes, mass spectrometer, low-noise CCD camera with optical spectrometer, video camera, very sensitive current probe to measure arc current, and a voltage probe to register variations in a conductor potential. All data (except video) were obtained in digital form that allowed us to study the correlation between external parameters (plasma density, additional capacitance, bias voltage, etc) and arc characteristics (arc rate, arc current pulse width and amplitude, gas species partial pressures, and intensities of spectral lines). Arc inception voltages, arc rates, and current selections are measured for samples with different coverglass materials and thickness, interconnect designs, and cell sizes. It is shown that the array with wrapthrough interconnects have the highest arc threshold and the lowest current collection. Coverglass design with overhang results in decrease of current collection and increase of arc threshold. Doubling coverglass thickness cases the increase in arc inception voltage. Both arc inception voltage and current collection increase significantly with increasing a sample temperature to 80 C. Sustained discharges are initiated between adjacent cells with potential differences of 40 V for the sample with 300 micron coverglass thickness and 60 V for the sample with 150 micron coverglass thickness. Installation of cryogenic pump in large vacuum chamber provided the possibility of considerable outgassing of array surfaces which resulted in significant decrease of arc rate. Arc sites were determined by employing a video-camera, and it is shown that the most probable sites for arc inception are triple-junctions, even though some arcs were initiated in gaps between cells. It is also shown that the arc rate increases with increasing of ion collection current. The analysis of optical spectra (240-800 nm) reveals intensive narrow atomic lines (Ag, H) and wide molecular bands (OH, CH, SiH, SiN) that confirms a complicated mechanism of arc plasma generation. The results obtained seem to be important for the understanding of the arc inception mechanism, which is absolutely essential for progress toward the design of high-voltage solar array for space application.

Vayner, Boris↗
NASA NTRS2004

Solar Array in Simulated LEO Plasma Environment

Six different types of solar arrays have been tested in large vacuum chambers. The low Earth orbit plasma environment was simulated in plasma vacuum chambers, where the parameters could be controlled precisely. Diagnostic equipment included spherical Langmuir probes, mass spectrometer, low-noise CCD camera with optical spectrometer, video camera, very sensitive current probe to measure arc current, and a voltage probe to register variations in a conductor potential. All data (except video) were obtained in digital form that allowed us to study the correlation between external parameters (plasma density, additional capacitance, bias voltage, etc) and arc characteristics (arc rate, arc current pulse width and amplitude, gas species partial pressures, and intensities of spectral lines). Arc inception voltages, arc rates, and current collections are measured for samples with different coverglass materials and thickness, interconnect designs, and cell sizes. It is shown that the array with wrapthrough interconnects have the highest arc threshold and the lowest current collection. Coverglass design with overhang results in decrease of current collection and increase of arc threshold. Doubling coverglass thickness causes the increase in arc inception voltage. Both arc inception voltage and current collection increase significantly with increasing a sample temperature to 80 C. Sustained discharges are initiated between adjacent cells with potential differences of 40 V for the sample with 300 m coverglass thickness and 60 V for the sample with 150 m coverglass thickness. Installation of cryogenic pump in large vacuum chamber provided the possibility of considerable outgassing of array surfaces which resulted in significant decrease of arc rate. Arc sites were determined by employing a video-camera, and it is shown that the most probable sites for arc inception are triple-junctions, even though some arcs were initiated in gaps between cells. It is also shown that the arc rate increases with increasing of ion collection current. The analysis of optical spectra (240-800 nm) reveals intensive narrow atomic lines (Ag, H) and wide molecular bands (OH, CH, SiH, SiN) that confirms a complicated mechanism of arc plasma generation. The results obtained seem to be important for the understanding of the arc inception mechanism, which is absolutely essential for progress toward the design of high-voltage solar array for space application.

Vayner, Boris↗
NASA NTRS2012

A Storm's Approach; Hurricane Shelter Training in a Digital Age

New York City's Office of Emergency Management (OEM) originally ran hundreds of classroom based courses, where they brought together civil servants to learn how to run a Hurricane Shelter (HS). This approach was found to be costly, time consuming and lacked any sense of an impending disaster and need for emergency response. In partnership with the City of New York University School of Professional studies, Gronstedt Group and Daden Limited, the OEM wanted to create a simulation that overcame these issues, providing users with a more immersive and realistic approach at a lower cost. The HS simulation was built in the virtual world Second Life (SL). Virtual worlds are a genre of online communities that often take the form of a computer-based simulated environments, through which users can interact with one another and use or create objects. Using this technology allowed managers to apply their knowledge in both classroom and remote learning environments. The shelter simulation is operational 24/7, guiding users through a 4 1/2 hour narrative from start to finish. This paper will describe the rationale for the project, the technical approach taken - particularly the use of a web based authoring tool to create and manage the immersive simulation, and the results from operational use.

Boyarsky, Andrew↗
NASA NTRSDate not supplied

Performance Analysis of SmallSat Aerocapture at Venus

Aerocapture is a method of spacecraft orbital insertion that has the potential to provide mass savings as compared to aerobraking. In particular, aerocapture at Venus is desirable due to high atmospheric density and potential for science return. While promising, accurate orbital insertion by means of aerocapture requires an active guidance, navigation, and control architecture. This paper documents the initial assessment of the performance of two guidance algorithms, a generalized numerical predictor corrector and the Fully-Numeric Predictor- corrector for Aerocapture Guidance, applied to smallsat aerocapture at Venus using two different simulation environments with equivalent simulation inputs. Nominal trajectory performance is assessed. In addition, Monte Carlo analysis is performed to compare each guidance algorithm’s performance under uncertainty.

aerocapture↗
NASA NTRSDate not supplied

Performance Analysis of SmallSat Aerocapture at Venus

Aerocapture is a method of spacecraft orbital insertion that has the potential to provide mass savings as compared to aerobraking. In particular, aerocapture at Venus is desirable due to high atmospheric density and potential for science return. While promising, accurate orbital insertion by means of aerocapture requires an active guidance, navigation, and control architecture. This paper documents the initial assessment of the performance of two guidance algorithms, a generalized numerical predictor corrector and the Fully-Numeric Predictor-corrector for Aerocapture Guidance, applied to smallsat aerocapture at Venus using two different simulation environments with equivalent simulation inputs. Nominal trajectory performance is assessed. In addition, Monte Carlo analysis is performed to compare each guidance algorithm’s performance under uncertainty.

aerocapture↗
NASA NTRSDate not supplied

Pathfinding for Airspace with Autonomous Vehicles (PAAV) ACAS Xr Terminal Area Simulation Overview

This presentation provides an overview of an upcoming human-in-the-loop simulation planned by the Pathfinding for Airspace with Autonomous Vehicles (PAAV) subproject, as part of the Air Traffic Management eXploration project. The study will investigate Detect and Avoid (DAA) concepts in and around the DAA terminal area (DTA). The DTA has received little investigation in real-time, pilot-in-the-loop simulation. This study proposes to use current remotely piloted aircraft system (RPAS) pilots to investigate the effectiveness of current DTA requirements using the FAA's Airborne Collision Avoidance System X for Rotorcraft (ACAS Xr) as the DAA system under test. The findings of this stufy will be used to inform DTA and ACAS Xr standards development. This presentation will be provided to RTCA Special Committee 228 as an overview and as an opportunity to collect feedback from the larger RPAS/DAA community on the study design and key scenarios and metrics. The presentation provides a brief overview of open areas of research with ACAS Xr, the experimental design, the simulation environment and the simulation schedule.

advanced air mobility↗
NASA NTRS1972

Exploratory flight investigation of ride quality in simulated STOL environment

A flight test experiment is described, in which various aspects of ride qualities were explored. Situations included simulated cruise and terminal area maneuvers, as might be typical of STOL transport operations. Various motion components were studied in isolation and in many combinations. The experiment included runs with and without turbulence, variations in airplane stability and handling qualities, and differences of pilot technique. The ride quality was strongly affected by roll, yaw, and heave motions; but very little by pitching. It was strongly affected by airplane stability and handling qualities and, in some cases, by piloting technique.

Seckel, E.↗
NASA NTRS2022

Asparagine Biosynthesis as a Mechanism of Increased Host Lethality Induced by Serratia Marcescens in Simulated Microgravity Environments

While studies have shown an increase in pathogenicity in several microbes during spaceflight and after exposure to simulated microgravity, the mechanisms underlying these changes in phenotype are not understood across different pathogens, particularly in opportunistic pathogens. This study evaluates the mechanism for increased virulence of the opportunistic gram-negative bacterium, Serratia marcescens, in simulated microgravity. Low-shear modeled microgravity (LSMMG) is used in ground-based studies to simulate the effects of microgravity as experienced in spaceflight. Our previous findings showed that there was a significant increase in mortality rates of the Drosophila melanogaster host when infected with either spaceflight or LSMMG treated S. marcescens. Here, we report that LSMMG increases asparagine uptake and synthesis in S. marcescens and that the increased host lethality induced by LSMMG bacteria grown in rich media can be recapitulated in minimal media by adding only aspartate and glutamine, the substrates of asparagine biosynthesis. Interestingly, increased bacterial growth rate alone is not sufficient to contribute to maximal host lethality, since the addition of aspartate to minimal media caused an LSMMG-specific increase in bacterial growth rate that is comparable to that induced by the combination of aspartate and glutamine, but this increase in growth does not cause an equivalent rate of host mortality. However, the addition of both aspartate and glutamine cause both an increase in host mortality and an overexpression of asparagine pathway genes in a LSMMG-dependent manner. We also report that L-asparaginase-mediated breakdown of asparagine is an effective countermeasure for the increased host mortality caused by LSMMG-treated bacteria. This investigation underscores the importance of the asparagine utilization pathway by helping uncover molecular mechanisms that underlie increased mortality rates of a model host infected with microgravity-treated S.marcescens and provides a potential mitigation strategy.

simulated microgravity↗
NASA NTRS2001

Thermally Induced Vibrations of the Hubble Space Telescope's Solar Array 3 in a Test Simulated Space Environment

NASA Goddard Space Flight Center and the European Space Agency (ESA) conducted a disturbance verification test on a flight Solar Array 3 (SA3) for the Hubble Space Telescope using the ESA Large Space Simulator (LSS) in Noordwijk, the Netherlands. The LSS cyclically illuminated the SA3 to simulate orbital temperature changes in a vacuum environment. Data acquisition systems measured signals from force transducers and accelerometers resulting from thermally induced vibrations of the SAI The LSS with its seismic mass boundary provided an excellent background environment for this test. This paper discusses the analysis performed on the measured transient SA3 responses and provides a summary of the results.

Early, Derrick A.↗
NASA NTRS1976

Testing of typical spacecraft materials in a simulated substorm environment

An investigation to determine spacecraft materials characteristics under charging conditions was conducted at the Lewis Research Center substorm simulation facility. The test specimens were spacecraft paints, silvered Teflon, thermal blankets and solar array segments. The samples, ranging in size from 300 to 1,000 sq cm were exposed to monoenergetic electron energies from 2 to 20 keV at a current density of 1 nA sq cm. The samples generally behaved as capacitors with strong voltage gradients at their edges. The charging characteristics of the silvered Teflon, Kapton, and solar cell covers were controlled by the secondary emission characteristics. Insulators that did not discharge were the spacecraft paints and the quartz fiber cloth thermal blanket sample. All other samples did experience discharges when the surface voltage reached -8 to -16 kV. The discharges were photographed. The breakdown voltage for each sample was determined and the average energy lost in the discharge was computed.

Stephens, N. J.↗
NASA NTRS2014

A Novel Application of TMA to Converging Runway Operations in a Simulated NextGen Environment

In 2013, the Airspace Operations Laboratory at NASA Ames Research Center conducted a human-in-the-loop simulation that examined the feasibility of applying a number of Next Generation Air Transportation System (NextGen) solutions to complex arrival operations in and around the New York metroplex. The delivery of arrivals to Newark Liberty International Airport (EWR) was the focus of this simulation, which involved extending the Terminal Sequencing and Spacing (TSS) scheduling capability to precisely schedule arrivals to intersecting runways 22 Left and 11. An important enabler for the concept was the availability of a dependent runway scheduler that was able to coordinate arrival times between aircraft landing on intersecting runways. At the time of the study, there was no functionality within the TSS scheduler to automatically create the dependent runway schedules. Instead, a Traffic Management Coordinator (TMC) manually created a de-conflicted schedule, which allowed for the concept to be tested as well as provided valuable insight into the tool requirements for a dependent runway scheduler. Throughout the course of preparations for the simulation, the individual serving as the TMC developed a number of strategies and procedures for manually adjusting the Scheduled Time of Arrival (STA) of the EWR arrivals in order to ensure that adequate spacing was provided between runway 22L and 11 arrival pairs. This paper describes the strategies and procedures that were developed and details how they were successfully applied during the simulation. Results will also be presented that shed additional light on exactly how the schedules were manipulated and their impact on delivery performance and safety. Ideas for additional TSS enhancements and next steps, based on participant feedback, will also be presented.

Homola, Jeffrey↗
NASA NTRS2016

Performance Evaluation of the Approaches and Algorithms for Hamburg Airport Operations

The German Aerospace Center (DLR) and the National Aeronautics and Space Administration (NASA) have been independently developing and testing their own concepts and tools for airport surface traffic management. Although these concepts and tools have been tested individually for European and US airports, they have never been compared or analyzed side-by-side. This paper presents the collaborative research devoted to the evaluation and analysis of two different surface management concepts. Hamburg Airport was used as a common test bed airport for the study. First, two independent simulations using the same traffic scenario were conducted: one by the DLR team using the Controller Assistance for Departure Optimization (CADEO) and the Taxi Routing for Aircraft: Creation and Controlling (TRACC) in a real-time simulation environment, and one by the NASA team based on the Spot and Runway Departure Advisor (SARDA) in a fast-time simulation environment. A set of common performance metrics was defined. The simulation results showed that both approaches produced operational benefits in efficiency, such as reducing taxi times, while maintaining runway throughput. Both approaches generated the gate pushback schedule to meet the runway schedule, such that the runway utilization was maximized. The conflict-free taxi guidance by TRACC helped avoid taxi conflicts and reduced taxiing stops, but the taxi benefit needed be assessed together with runway throughput to analyze the overall performance objective.

air traffic management↗
NASA NTRS2016

Performance Evaluation of the Approaches and Algorithms using Hamburg Airport Operations

The German Aerospace Center (DLR) and the National Aeronautics and Space Administration (NASA) have been independently developing and testing their own concepts and tools for airport surface traffic management. Although these concepts and tools have been tested individually for European and US airports, they have never been compared or analyzed side-by-side. This paper presents the collaborative research devoted to the evaluation and analysis of two different surface management concepts. Hamburg Airport was used as a common test bed airport for the study. First, two independent simulations using the same traffic scenario were conducted: one by the DLR team using the Controller Assistance for Departure Optimization (CADEO) and the Taxi Routing for Aircraft58; Creation and Controlling (TRACC) in a real-time simulation environment, and one by the NASA team based on the Spot and Runway Departure Advisor (SARDA) in a fast-time simulation environment. A set of common performance metrics was defined. The simulation results showed that both approaches produced operational benefits in efficiency, such as reducing taxi times, while maintaining runway throughput. Both approaches generated the gate pushback schedule to meet the runway schedule, such that the runway utilization was maximized. The conflict-free taxi guidance by TRACC helped avoid taxi conflicts and reduced taxiing stops, but the taxi benefit needed be assessed together with runway throughput to analyze the overall performance objective.

Airport surface operations↗