Search NASA⌕ Search

SEARCH · Search NASA

Results for “Expression systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Solar energy system economic evaluation: IBM System 2, Togus, Maine

The economic analysis of the solar energy system, is developed for Torgus and four other sites typical of a wide range of environmental and economic conditions in the continental United States. This analysis is accomplished based on the technical and economic models in the f-chart design procedure with inputs taken on the characteristics of the installed system and local conditions. The results are expressed in terms of the economic parameters of present worth of system cost over a projected twenty year life, life cycle savings, year of positive savings and year of payback for the optimized solar energy system at each of the analysis sites. The sensitivity of the economic evaluation to uncertainties in constituent system and economic variables is also investigated. Results demonstrate that the solar energy system is economically viable at all of the five sites for which the analysis was conducted.

Source record↗
NASA NTRS1980

Solar energy system economic evaluation final report for SEMCO-Loxahatchee, Loxahatchee National Wildlife refuge, Palm Beach County, Florida

Economic analysis of the solar energy system installed at Loxahatchee, was developed for Loxahatchee and four other sites typical of a wide range of environmental and economic conditions in the continental United States. This analysis was accomplished based on the technical and economic models in the f Chart design procedure with inputs based on the characteristics of the installed system and local conditions. The results are expressed in terms of the economic parameters of present worth of system costs over a projected twenty year life, life cycle savings, year of positive savings and year of payback for the optimized solar energy system at each of the analysis sites. The sensitivity of the economic evaluation to uncertainties in constituent system and economic variables was also investigated. The results demonstrate that the solar energy system is economically viable at all of the five sites for which the analysis was conducted.

Source record↗
NASA NTRS1980

Solar energy system economic evaluation for Elcam-Tempe, Tempe, Arizona and Elcam-San Diego, San Diego, California

The long term economic performance of the solar energy system at its installation site is analyzed and four additional locations selected to demonstrate the viability of the design over a broad range of environmental and economic conditions. The economic analysis of the solar energy systems that were installed at Tempe, Arizona and San Diego, California, is developed for these and four other sites typical of a wide range of environmental and economic conditions in the continental United States. This analysis is accomplished based on the technical and economic models in the f Chart design procedure with inputs based on the characteristics of the installed system and local conditions. The results are expressed in terms of the economic parameters of present worth of system cost over a projected twenty year life: life cycle savings; year of positive savings; and year of payback for the optimized solar energy system at each of the analysis sites. The sensitivity of the economic evaluation to uncertainites in constituent system and economic variables is also investigated. The results demonstrate that the solar energy system is economically viable at all of the sites for which the analysis was conducted.

Source record↗
NASA NTRS1980

Solar energy system economic evaluation for Seeco Lincoln, Lincoln, Nebraska

The economic analysis of the solar energy system that was installed at Lincoln, Nebraska is developed for this and four other sites typical of a wide range of environmental and economic conditions in the continental United States. This analysis is accomplished based on the technical and economic models in the f chart design procedure with inputs based on the characteristics of the installed system and local conditions. The results are expressed in terms of the economic parameters of present worth of system cost over projected twenty year life: life cycle savings, year of positive savings and year of payback for the optimized solar energy system at each of the analysis sites. The sensitivity of the economic evaluation to uncertainties in constituent system and economic variables is also investigated.

Source record↗
NASA NTRS1987

A conceptual framework for intelligent real-time information processing

By combining artificial intelligence concepts with the human information processing model of Rasmussen, a conceptual framework was developed for real time artificial intelligence systems which provides a foundation for system organization, control and validation. The approach is based on the description of system processing terms of an abstraction hierarchy of states of knowledge. The states of knowledge are organized along one dimension which corresponds to the extent to which the concepts are expressed in terms of the system inouts or in terms of the system response. Thus organized, the useful states form a generally triangular shape with the sensors and effectors forming the lower two vertices and the full evaluated set of courses of action the apex. Within the triangle boundaries are numerous processing paths which shortcut the detailed processing, by connecting incomplete levels of analysis to partially defined responses. Shortcuts at different levels of abstraction include reflexes, sensory motor control, rule based behavior, and satisficing. This approach was used in the design of a real time tactical decision aiding system, and in defining an intelligent aiding system for transport pilots.

Schudy, Robert↗
NASA NTRS2019

Gene Expression Measurement Module (GEMM) for space application: Design and validation

In order to facilitate studies on the impact of the space environment on biological systems, we have developed a prototype of GEMM (Gene Expression Measurement Module) - an automated, miniaturized, integrated fluidic system for in-situ measurements of gene expression in microbial samples. The GEMM instrument is capable of (1) lysing bacterial cell walls, (2) extracting and purifying RNA released from cells, (3) hybridizing the RNA to probes attached to a microarray and (4) providing electrochemical readout, all in a microfluidics cartridge. To function on small, uncrewed spacecraft, the conventional, laboratory protocols for both sample preparation and hybridization required significant modifications. Biological validation of the instrument was carried out on Synechococcus elongatus, a photosynthetic cyanobacterium known for its metabolic diversity and resilience to adverse conditions. It was demonstrated that GEMM yielded reliable, reproducible gene expression profiles. GEMM is the only high throughput instrument that can be deployed in near future on space platforms other than the ISS to advance biological research in space. It can also prove useful for numerous terrestrial applications in the field.

Kianoosh Peyvan↗
NASA NTRS2012

Gene Expression Measurement Module (GEMM) - A Fully Automated, Miniaturized Instrument for Measuring Gene Expression in Space

The capability to measure gene expression on board spacecraft opens the door to a large number of high-value experiments on the influence of the space environment on biological systems. For example, measurements of gene expression will help us to understand adaptation of terrestrial life to conditions beyond the planet of origin, identify deleterious effects of the space environment on a wide range of organisms from microbes to humans, develop effective countermeasures against these effects, and determine the metabolic bases of microbial pathogenicity and drug resistance. These and other applications hold significant potential for discoveries in space biology, biotechnology, and medicine. Supported by funding from the NASA Astrobiology Science and Technology Instrument Development Program, we are developing a fully automated, miniaturized, integrated fluidic system for small spacecraft capable of in-situ measurement of expression of several hundreds of microbial genes from multiple samples. The instrument will be capable of (1) lysing cell walls of bacteria sampled from cultures grown in space, (2) extracting and purifying RNA released from cells, (3) hybridizing the RNA on a microarray and (4) providing readout of the microarray signal, all in a single microfluidics cartridge. The device is suitable for deployment on nanosatellite platforms developed by NASA Ames' Small Spacecraft Division. To meet space and other technical constraints imposed by these platforms, a number of technical innovations are being implemented. The integration and end-to-end technological and biological validation of the instrument are carried out using as a model the photosynthetic bacterium Synechococcus elongatus, known for its remarkable metabolic diversity and resilience to adverse conditions. Each step in the measurement process-lysis, nucleic acid extraction, purification, and hybridization to an array-is assessed through comparison of the results obtained using the instrument with those from standard laboratory protocols. Once developed, the system can be used with minor modifications for multiple experiments on different platforms in space, including extension to higher organisms and microbial monitoring. A proposed version of GEMM that is capable of handling both microbial and tissue samples on the International Space Station will be briefly summarized.

Pohorille, Andrew↗
NASA NTRS1995

Quality Audit in the Fastener Industry

Both the financial and quality communities rely on audits to verify customers records. The financial community is highly structured around three categories of risk, INHERENT RISK, CONTROL RISK, and DETECTION RISK. Combined, the product of these three categories constitute the AUDIT RISK. The financial community establishes CONTROL RISK based in large part on a systems level understanding of the process flow. This system level understanding is best expressed in a flowchart. The quality community may be able to adopt this structure and thereby reduce cost while maintaining and enhancing quality. The quality community should attempt to flowchart the systems level quality process before beginning substantive testing. This theory needs to be applied in several trial cases to prove or disprove this hypothesis

Reagan, John R.↗
NASA NTRS1980

Laser-fluorescence measurement of marine algae

Progress in remote sensing of algae by laser-induced fluorescence is subject of comprehensive report. Existing single-wavelength and four-wavelength systems are reviewed, and new expression for power received by airborne sensor is derived. Result differs by as much as factor of 10 from those previously reported. Detailed error analysis evluates factors affecting accuracy of laser-fluorosensor systems.

Browell, E. V.↗
NASA NTRS2017

Successful Validation of RNA Purification and Quantitative Real-Time PCR Analysis of Gene Expression on the International Space Station

The NASA Ames WetLab-2 system was developed to offer new on-orbit gene expression analysis capabilities to ISS researchers and can be used to conduct on-orbit RNA isolation and quantitative real time PCR (RT-qPCR) analysis of gene expression from a wide range of biological samples ranging from microbes to mammalian tissues. On orbit validation included three quantitative PCR (qPCR) runs using an E. coli genomic DNA template pre-loaded at three different concentrations. The flight Ct values for the DNA standards showed no statistically significant differences relative to ground controls although there was increased noise in Ct curves, likely due to microgravity-related bubble retention in the optical windows. RNA was successfully purified from both E. coli and mouse liver samples and successfully generated singleplex, duplex and triplex data although with higher standard deviations than ground controls, also likely due to bubbles. Using volunteer science activities, a potential bubble reduction strategy was tested and resulted in smooth amplification curves and tighter Cts between replicates. The WetLab-2 validation experiment demonstrates a novel molecular biology workbench on ISS which allows scientists to purify and stabilize RNA, and to conduct RT-qPCR analyses on-orbit with rapid results. This novel ability is an important step towards utilizing ISS as a National Laboratory facility with the capability to conduct and adjust science experiments in real time without sample return, and opens new possibilities for rapid medical diagnostics and biological environmental monitoring on ISS.

microgravity↗
DOE OSTI2024

Spectral gaps of two- and three-dimensional many-body quantum systems in the thermodynamic limit

We present an expression for the spectral gap, opening up new possibilities for performing and accelerating spectral calculations of quantum many-body systems. We develop and demonstrate one such possibility in the context of tensor network simulations. Our approach requires only minor modifications of the widely used simple update method and is computationally lightweight relative to other approaches. We validate it by computing spectral gaps of the 2D and 3D transverse-field Ising models and find strong agreement with previously reported perturbation theory results. Published by the American Physical Society 2024

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1996

Pluto Express: Advanced Technologies Enable Lower Cost Missions to the Outer Solar System and Beyond

Missions to Pluto and the outer Solar System are typically driven by factors which tend to increase cost, such as: long life, high radiation exposure, a large power source, high (delta)V requirements, difficult telecommunications links, low solar illumination at the destination, and demanding science measurements. Advanced technology is a central part of responding to such challenges in a manner which permits the cost of development and operations to be an order of magnitude less than for prior outer planet missions...This paper summarizes the curent technology development plan which is tightly coupled to the New Millenium Program (NMP) Deep Space 1 technology validation flight. Specific details will be presented about advanced microelectronics technology.

New↗
NASA NTRS2001

Hall Thruster Plume Measurements On-Board the Russian Express Satellites

The operation of North-South and East-West station-keeping Hall thruster propulsion systems on-board two Russian Express-A geosynchronous communication satellites were investigated through a collaborative effort with the manufacturer of the spacecraft. Over 435 firings of 16 different thrusters with a cumulative run time of over 550 hr were reported with no thruster failures. Momentum transfer due to plume impingement was evaluated based on reductions in the effective thrust of the SPT-100 thrusters and induced disturbance torques determined based on attitude control system data and range data. Hall thruster plasma plume effects on the transmission of C-band and Ku-band communication signals were shown to be negligible. On-orbit ion current density measurements were made and subsequently compared to predictions and ground test data. Ion energy, total pressure, and electric field strength measurements were also measured on-orbit. The effect of Hall thruster operation on solar array performance over several months was investigated. A subset of these data is presented.

Manzella, David↗
NASA NTRS1992

Representation and presentation of requirements knowledge

An approach to representation and presentation of knowledge used in the ARIES, an experimental requirements/specification environment, is described. The approach applies the notion of a representation architecture to the domain of software engineering and incorporates a strong coupling to a transformation system. It is characterized by a single highly expressive underlying representation, interfaced simultaneously to multiple presentations, each with notations of differing degrees of expressivity. This enables analysts to use multiple languages for describing systems and have these descriptions yield a single consistent model of the system.

Johnson, W. L.↗
NASA NTRS1991

Parameter estimation for distributed parameter models of complex, flexible structures

Distributed parameter modeling of structural dynamics has been limited to simple spacecraft configurations because of the difficulty of handling several distributed parameter systems linked at their boundaries. Although there is other computer software able to generate such models or complex, flexible spacecraft, unfortunately, neither is suitable for parameter estimation. Because of this limitation the computer software PDEMOD is being developed for the express purposes of modeling, control system analysis, parameter estimation and structure optimization. PDEMOD is capable of modeling complex, flexible spacecraft which consist of a three-dimensional network of flexible beams and rigid bodies. Each beam has bending (Bernoulli-Euler or Timoshenko) in two directions, torsion, and elongation degrees of freedom. The rigid bodies can be attached to the beam ends at any angle or body location. PDEMOD is also capable of performing parameter estimation based on matching experimental modal frequencies and static deflection test data. The underlying formulation and the results of using this approach for test data of the Mini-MAST truss will be discussed. The resulting accuracy of the parameter estimates when using such limited data can impact significantly the instrumentation requirements for on-orbit tests.

Taylor, Lawrence W., Jr.↗
DOE OSTI2026

Development, optimization, and application of an episomal plasmid system for Rhodotorula toruloides

Rhodotorula toruloides is an emerging oleaginous yeast with strong potential as a microbial cell factory for the production of acetyl-CoA-derived bioproducts. However, engineering of this organism has been limited by the absence of a functional episomal plasmid system, a foundational genetic tool for rapid gene expression, pathway testing, and CRISPR-based genome engineering. Here, we report the first episomal plasmid system for R. toruloides . Through systematic screening of candidate autonomously replicating sequences (ARSs) from diverse sources, we identified multiple functional ARS elements and selected C63F4, a fragment derived from Contig 63 of R. toruloides CBS14, because of its stable performance. The resulting pC63F4 plasmid was maintained episomally, supported GFP reporter expression, exhibited a copy number of 2.39 ± 0.13, and showed good stability during long term cultivation. To overcome poor transformation efficiency, we developed a Cre- loxP -mediated in vivo re-circularization strategy that enabled reliable delivery of the episomal plasmid. Using this improved system, we demonstrated functional episomal expression of metabolic engineering genes and multi-gene pathways for the production of triacetic acid lactone, fatty alcohols, and limonene. Finally, we leveraged this platform to establish a redesigned CRISPR system that enables seamless genome editing in R. toruloides for the first time, while also simplifying marker recycling. Together, this work establishes a long-needed episomal plasmid platform and associated CRISPR toolkit that will accelerate metabolic engineering, synthetic biology, and fundamental studies in R. toruloides .

CRISPR-Cas9↗
DOE OSTI2026

Data for Development, Optimization, and Application of an Episomal Plasmid System for Rhodotorula toruloides

Rhodotorula toruloides is an emerging oleaginous yeast with strong potential as a microbial cell factory for the production of acetyl-CoA-derived bioproducts. However, engineering of this organism has been limited by the absence of a functional episomal plasmid system, a foundational genetic tool for rapid gene expression, pathway testing, and CRISPR-based genome engineering. Here, we report the first episomal plasmid system for R. toruloides . Through systematic screening of candidate autonomously replicating sequences (ARSs) from diverse sources, we identified multiple functional ARS elements and selected C63F4, a fragment derived from Contig 63 of R. toruloides CBS14, because of its stable performance. The resulting pC63F4 plasmid was maintained episomally, supported GFP reporter expression, exhibited a copy number of 2.39 ± 0.13, and showed good stability during long term cultivation. To overcome poor transformation efficiency, we developed a Cre-loxP-mediated in vivo re-circularization strategy that enabled reliable delivery of the episomal plasmid. Using this improved system, we demonstrated functional episomal expression of metabolic engineering genes and multi-gene pathways for the production of triacetic acid lactone, fatty alcohols, and limonene. Finally, we leveraged this platform to establish a redesigned CRISPR system that enables seamless genome editing in R. toruloides for the first time, while also simplifying marker recycling. Together, this work establishes a long-needed episomal plasmid platform and associated CRISPR toolkit that will accelerate metabolic engineering, synthetic biology, and fundamental studies in R. toruloides .

Gene Editing↗
NASA NTRS1990

Doppler radar imaging of spherical planetary surfaces

This paper describes a technique for using echo power-spectra for making radar images of spherical planetary targets. In developing the Doppler-radar imaging system, the target's reflectivity distribution is expanded in a truncated spherical harmonic series; the distribution of echo power in rotational phase and the Doppler frequency are obtained in form of a system of linear equations which express the echo spectra as functions of the series coefficients. To estimate the coefficients from an observed phase-Doppler distribution, the inversion is cast as a least-squares problem, and is solved using singular value decompositions, yielding a linear imaging system which can be fully characterized by its impulse response as a function of latitude. Simulations were designed and used to explore the capabilities of Doppler radar imaging, and the sensitivity of imaging to such factors as subradar altitude coverage and signal-to-noise ratio was investigated.

Hudson, R. Scott↗