Search NASA⌕ Search

SEARCH · Search NASA

Results for “Extensibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Rapid interface flaw extension with friction

An idealized two-dimensional example of rapid interface flow extension is described. Initially undisturbed dissimilar isotropic, homogeneous, linearly elastic half-spaces are perfectly bonded along the interface y=0. Quantities associated with the half-space or = to 0 are denoted by the prime superscript or the subscripts 3 or 4 while those in y or = to 0 carry the subscripts 1 or 2. At time t=0 adjacent material points at x=0, y= + or - 0 are forced apart horizontally with a constant relative velocity delta v. This results in a zone of bond failure which extends symmetrically along the interface at a constant rate c. The newly created flaw surfaces are in sliding contact resisted by Coulomb friction. The friction coefficient is gamma.

Brock, L. M.↗

Nonlinear Curvature Expressions for Combined Flapwise Bending, Chordwise Bending, Torsion and Extension of Twisted Rotor Blades

The nonlinear curvature expressions for a twisted rotor blade or a beam undergoing transverse bending in two planes, torsion, and extension were developed. The curvature expressions were obtained using simple geometric considerations. The expressions were first developed in a general manner using the geometrical nonlinear theory of elasticity. These general nonlinear expressions were then systematically reduced to four levels of approximation by imposing various simplifying assumptions, and in each of these levels the second degree nonlinear expressions were given. The assumptions were carefully stated and their implications with respect to the nonlinear theory of elasticity as applied to beams were pointed out. The transformation matrices between the deformed and undeformed blade-fixed coordinates, which were needed in the development of the curvature expressions, were also given for three of the levels of approximation. The present curvature expressions and transformation matrices were compared with corresponding expressions existing in the literature.

Kvaternik, R. G.↗

Inspection of two Brayton rotating units after extensive endurance testing

A system was designed to produce 2-10 kW net continuous electric power for at least 5 years. The turbine-alternator-compressor power conversion unit in the system is designated Brayton Rotating Unit (BRU). Four BRU's were fabricated and extensively tested. One BRU has accumulated 11,000 hours of operation, and another has accumulated in excess of 21,000 hours. Testing has demonstrated that the BRU's have met or exceeded performance objectives. Two BRU's were disassembled and given a thorough post-test inspection. The inspection results show that after 21,000 hours of operation there is no apparent wear or failure mode that will prevent the attainment of the 5-year life objective.

Dunn, J. H.↗

An extension of the dual magnetometer method for use on a dual spinning spacecraft

A method of estimating and correcting for the magnetic field of a dual spinning spacecraft has been developed by employing an extension of the dual magnetometer technique. This new method is useful for those situations in which a magnetometer boom of modest length is attached to the spinning part of a large spacecraft. The purpose of using a dual spinning spacecraft is to accommodate two types of instruments: imaging and similar pointed remote sensing systems on the stationary platform, and fields, particles and other in-situ measuring instruments on the spinning portion. The new method assumes that the stationary part of the spacecraft possesses a magnetic field which is represented by a combination of a dipole and a quadrupole field.

Lepping, R. P.↗

Extension of pulmonary O2 tolerance in man at 2 ATA by intermittent O2 exposure

To study extension of O2 tolerance by interruption of hyperoxic exposure, five healthy volunteers were exposed to oxygen at 2 ATA on an intermittent schedule of 20 min breathing O2, alternating with 5 min on a normoxic N2-O2 mixture. The cycle was repeated until symptoms or signs of O2 toxicity caused cessation of the experiment. Tracheal irritation and burning on inspiration occurred after 6-9 'oxygen hours' of exposure and progressed to severe tracheobronchial burning sensation, chest pain, and dyspnea after 11-15 h of O2. With intermittent O2 administration, nearly a doubling of the average duration of actual oxygen breathing was required to induce marked vital capacity change (more than 10%) as compared to the previous studies of continuous O2 exposure.

Hendricks, P. L.↗

An evaluation of the signature extension approach to large area crop inventories utilizing space image data

The author has identified the following significant results. Two examples of haze correction algorithms were tested: CROP-A and XSTAR. The CROP-A was tested in a unitemporal mode on data collected in 1973-74 over ten sample segments in Kansas. Because of the uniformly low level of haze present in these segments, no conclusion could be reached about CROP-A's ability to compensate for haze. It was noted, however, that in some cases CROP-A made serious errors which actually degraded classification performance. The haze correction algorithm XSTAR was tested in a multitemporal mode on 1975-76 LACIE sample segment data over 23 blind sites in Kansas and 18 sample segments in North Dakota, providing wide range of haze levels and other conditions for algorithm evaluation. It was found that this algorithm substantially improved signature extension classification accuracy when a sum-of-likelihoods classifier was used with an alien rejection threshold.

Nalepka, R. F.↗

Performance tests of signature extension algorithms

Comparative tests were performed on seven signature extension algorithms to evaluate their effectiveness in correcting for changes in atmospheric haze and sun angle in a LANDSAT scene. Four of the algorithms were cluster matching, and two were maximum likelihood algorithms. The seventh algorithm determined the haze level in both training and recognition segments and used a set of tables calculated from an atmospheric model to determine the affine transformation that corrects the training signatures for changes in sun angle and haze level. Three of the algorithms were tested on a simulated data set, and all of the algorithms were tested on consecutive-day data.

Abotteen, R. A.↗

Application of winglets and/or wing tip extensions with active load control on the Boeing 747

The application of wing tip modifications and active control technology to the Boeing 747 airplane for the purpose of improving fuel efficiency is considered. Wing tip extensions, wing tip winglets, and the use of the outboard ailerons for active wing load alleviation are described. Modest performance improvements are indicated. A costs versus benefits approach is taken to decide which, if any, of the concepts warrant further development and flight test leading to possible incorporation into production airplanes.

Allison, R. L.↗

Space shuttle orbiter trimmed center-of-gravity extension study. Volume 6: System design studies

System studies were made to determine the required changes in shuttle orbiter mass for various changes in aerodynamic shape. These changes are designed to extend the current shuttle orbiter trimmed c.g. envelope to accommodate a greater range of payloads. One of the apparently most viable changes for the amount of c.g. extension obtained involves the removal of the present wing/body fillet and the replacement of this structural element with a forward located fixed canard.

Macconochie, I. O.↗

Performance tests of signature extension algorithms

Comparative tests were performed on seven signature extension algorithms to evaluate their effectiveness in correcting for changes in atmospheric haze and sun angle in a Landsat scene. Four of the algorithms were cluster matching, and two were maximum likelihood algorithms. The seventh algorithm determined the haze level in both training and recognition segments and used a set of tables calculated from an atmospheric model to determine the affine transformation that corrects the training signatures for changes in sun angle and haze level. Three of the algorithms were tested on a simulated data set, and all of the algorithms were tested on consecutive-day data. The classification performance on the data sets using the algorithms is presented, along with results of statistical tests on the accuracy and proportion estimates. The three algorithms tested on the simulated data produced significant improvements over the results obtained using untransformed signatures. For the consecutive-day data, the tested algorithms produced improvements in most but not all cases. The tests indicated also that no statistically significant differences were noted among the algorithms.

Abotteen, R.↗

Extensions of guiding center motion to higher order

In a static magnetic field, some well-known guiding-center equations maintain their form when extended to next order in gyroradius. In these cases, it is only necessary to include the next order term in the magnetic moment series. The differential equation for guiding-center motion which describes both the parallel and perpendicular velocities correctly through first order in gyroradius is given. The question of how to define the guiding center position through second order arises and is discussed, and second order drifts are derived for one usual definition. The toroidal canonical angular momentum, P-phi, of the guiding center in an axisymmetric field is shown to be conserved using the guiding center velocity correct through first order. When second-order motion is included, P-phi is no longer a constant. The above extensions of guiding-center theory help to resolve the different tokamak orbits obtained either by using the guiding-center equations of motion or by using conservation of P-phi.

Northrop, T. G.↗

An extension of the dual magnetometer method for use on a dual spinning spacecraft

A method of estimating and correcting for the magnetic field of a dual spinning spacecraft has been developed by employing an extension of the dual magnetometer technique of Ness et al. (1971). This new method is useful for those situations in which a magnetometer boom of modest length (7-10 m) is attached to the spinning part of a large spacecraft (800-1000 kg). The purpose of using a dual spinning spacecraft is to accommodate two types of instruments: (1) imaging and similar 'pointed' remote sensing systems on the stationary platform and (2) fields, particles, and other in situ measuring instruments on the spinning portion. Present-day imaging systems are well known to exhibit large magnetic moments, sometimes displaced from the spacecraft center by a significant amount. The new method assumes that the stationary part of the spacecraft possesses a magnetic field which is represented by a combination of a dipole and a quadrupole field.

Lepping, R. P.↗

Extension, validation and application of the NASCAP code

Numerous extensions were made in the NASCAP code. They fall into three categories: a greater range of definable objects, a more sophisticated computational model, and simplified code structure and usage. An important validation of NASCAP was performed using a new two dimensional computer code (TWOD). An interactive code (MATCHG) was written to compare material parameter inputs with charging results. The first major application of NASCAP was performed on the SCATHA satellite. Shadowing and charging calculation were completed. NASCAP was installed at the Air Force Geophysics Laboratory, where researchers plan to use it to interpret SCATHA data.

Katz, I.↗

Extensions to the classical calculation of the effect of mutual shadowing in diffuse reflection

The classical method for accounting for the mutual shadowing among closely packed particles in multiple scattering calculations is extended in the following ways. (1) By modeling the particle distribution by a Poisson process with a varying density parameter, a 'Van der Waals' type approximation allows extension to a greater fractional volume density, D. In this case it is only required that D squared be much less than 1 instead of D being much less than 1. (2) In the case that the particle distribution is not uniform the classical calculation may be weighted by the pair correlation function of the distribution. (3) The use of the Markov chain formalism for radiative transfer allows inclusion of the effect of shadowing for two orders of scattering. For conditions such as might apply in Saturn's rings, the inclusion of this effect makes less than a 0.1% difference in the calculated phase curves, compared to previous calculations which have included shadowing only in the first scattering. The latter are thus shown to be quite accurate.

Esposito, L. W.↗

Global operators for delta functions - Extension to scattering states and the inclusion of spin

The paper presents an extension of the identities of Hiller, Sucher, and Feinberg for the evaluation of bound-state matrix elements of delta function operators, to scattering states. Attention is given to the technical difficulties encountered in the application of the scattering-state identities and how they can be overcome, including infrared singularities which arise if Coulomb forces are present and the velocity of the incident particle is small. In addition, both the scattering and bound-state identities are generalized to include spin-dependent contact interactions and spin-dependent Hamiltonians. Finally, it is stressed that the identities can be used to improve the accuracy of calculations of interest for diverse physical phenomena, ranging from positron annihilation to hyperfine structure.

Sucher, J.↗

The extension of the concept of the cosmic-ray path-length distribution to nonrelativistic energies

The concept of the cosmic-ray path-length distribution is examined. The corresponding cosmic-ray propagation calculational procedure has been justified theoretically at relativistic energies (Ginzburg and Syrovatskii, 1964) where the effects of ionization energy loss are negligible. The present paper extends the use of the path-length distribution concept in cosmic-ray propagation calculations to nonrelativistic energies. Sufficient constraints to effect this extension are presented. The solution of the cosmic-ray propagation equations in terms of a Green's function approach is also investigated and is used to provide a formulation of the path-length distribution at nonrelativistic as well as relativistic energies in terms of the cosmic-ray source distribution and the propagation characteristics of the interstellar medium. The leaky-box model of cosmic-ray propagation is also examined.

Lezniak, J. A.↗

A power extension package /PEP/ for the Shuttle Orbiter

A concept for solar array augmentation of the power normally provided by the Shuttle Orbiter fuel cells in support of payloads is discussed. Justification for the use of solar arrays rather than additional cryogenic fuel kits for extension of on-orbit stay time is presented. This is followed by a description of the array power system and an examination of its interfaces with the existing Orbiter fuel cell system. The system produces 29 kW total with 14 kW allocated to the Orbiter and 15 kW to payloads and permits an increase in on-orbit mission duration from 6 to approximately 20 days at 21 kW with four cryo kits. It is capable of producing full output in diverse vehicle orientations since the array is deployed and oriented by the Orbiter remote manipulator system (RMS). Power produced by the arrays is reduced to 32.25 to 32.5 volts by pulse-width-modulated buck voltage regulators to force the Orbiter fuel cells into an idle mode during the sunlighted portions of the orbit.

Ness, H. C.↗

Signature extension methods in crop area estimation

The Procedure B multispectral processing system is both multisegment and multistratum. It uses data from several LACIE-sized segments together and makes a proportion estimate for the entire group of segments as well as for the individual segments. In the clustering of data features, Procedure B produces multiple classes or strata rather than just two strata (as in Procedure 1), and performs stratified sampling on each of these mutliple strata in order to make a proportion estimate. Tests results for the components and for the overall performance of Procedure B are presented, and conclusions that can be drawn from these tests are discussed. The rationale for signature extension for crop area estimation is summarized.

Kauth, R. J.↗